Atmospheric deposition of heavy metals (Cu, Zn, Cd and Pb) in Varanasi City, India

Rapid growth in urbanization and industrialization in developing countries may significantly contribute in heavy metal contamination of vegetables through atmospheric depositions. In the present study, an assessment was made to investigate the spatial and seasonal variations in deposition rates of heavy metals and its contribution to contamination of palak (Beta vulgaris). Samples of bulk atmospheric deposits and Beta vulgaris for analysis of Cu, Zn, Cd and Pb were collected from different sampling locations differing in traffic density and land use patterns. The results showed that the sampling locations situated in industrial or commercial areas with heavy traffic load showed significantly elevated levels of Cu, Zn and Cd deposition rate as compared to those situated in residential areas with low traffic load. The deposition rates of Cu, Zn and Cd were significantly higher in summer and winter as compared to rainy season, however, Pb deposition rate was significantly higher in rainy and summer seasons as compared to winter season. Atmospheric depositions have significantly elevated the levels of heavy metals in B. vulgaris collected during evening as compared to those collected in morning hours. The study further showed that local population has maximum exposure to Cd contamination through consumption of B. vulgaris. The present study clearly points out the urban and industrial activities of a city have potential to elevate the levels of heavy metals in the atmospheric deposits, which may consequently contaminate the food chain and thus posing health risk to the local population.     

Spatial distribution of trace metals (Cd, Pb, Hg, Cu, Zn, Fe and Mn) and oligo-elements (Mg, Ca, Na and K) in surface sediments of the Gulf of Tunis (Northern Tunisia)

The purpose of this paper is to evaluate the levels and spatial distribution of trace metals (Cd, Pb, Cu, Hg, Zn, Fe, and Mn), oligo-elements (Mg, Ca, Na and K), total organic carbon (TOC), and total nitrogen (TN) in the fine fraction of surface sediments collected from 38 stations in Gulf of Tunis (Mediterranean Sea, Northern Tunisia) between 2004 and 2005. The results showed that metals, oligo-elements, TOC, and TN concentrations in the sediments of the Gulf of Tunis are generally low compared to those found in other similar coastal marine areas. The spatial distribution of metals showed areas of major accumulation of Pb, Cd, Cu, Fe, and Zn in the central area of the Gulf and near the Mejerda River. The marine currents are influencing factors on metal accumulation in sediments. The principal component analysis applied to our elemental analytical results showed that there is a positive correlation between Fe, Zn, Cu, and Pb. These metals have a stronger affinity with site connection in the sediments than Ca and Mn.     

Chemical speciation and partitioning of trace metals (Cd, Co, Cu, Ni, Pb) in the lower Athabasca river and its tributaries (Alberta, Canada)

Concentrations of Cd, Co, Cu, Ni and Pb were measured in particulate and dissolved phases at 11 sites located upstream and near Athabasca oil sands development. The in situ discrimination between non-labile and labile dissolved metals was done using diffusive gradients in thin-films (DGT) devices. The DGT-labile fraction of Co and Ni was 30% lower near development sites whereas Cu, Cd and Pb showed minor changes spatially. It was found that an 8-fold increase in dissolved organic matter (DOM) near development induced a rapid decrease in DGT-labile metals. Dissolved metal concentrations were used along with DOM, major ions, nutrients, pH and conductivity to calculate the distribution of dissolved metal species using the speciation model WHAM. Labile-DGT metal concentrations agreed well with WHAM-predicted concentrations. It was also found that a significant amount of metals were associated with the non-DGT labile fraction (i.e. colloidal DOM) and colloid abundance was more important than suspended particulate matter abundance in influencing metal mobility near Athabasca oil soils development. Since changes in colloidal DOM levels are likely to be the result of surface mining activities, this confirms the serious effects of oil sands activities on metal biogeochemical cycles in the lower Athabasca River.     

Biomonitoring of arsenic through mangrove oyster (Crassostrea corteziensis Hertlein, 1951) from coastal lagoons (SE Gulf of California): occurrence of arsenobetaine and other arseno-compounds

In this study, we examined the bioavailability of arsenic through the mangrove oyster Crassostrea corteziensis sampled from seven coastal lagoons in SE Gulf of California during the rainy and dry seasons. As concentrations in soft tissue of oysters C. corteziensis fluctuated between 5.2 and 11.6 μg/g on dry weight; organisms from the control site presented the lowest As concentrations in the two sampling seasons. As speciation was evaluated in selected samples and indicated that arsenobetaine was the major arseno-compound accounting for 53.5–74.7 % of total As. Lower percentage contributions were obtained for nonextractable As (9.7–25.5 %) and other molecules such as arsenocholine and methyl-arsonate (<5 %). Inorganic As was detectable in only two samples, at concentrations lower than 0.1 μg/g. These As data are the first generated in NW Mexico and indicate that C. corteziensis is safe for human consumption in terms of arseno-compounds. It is evident that As bioavailability in these lagoons is low.     

Biomonitoring of heavy metals (Cd,Hg, and Pb) and metalloid (As) with the Portuguese common buzzard (Buteo buteo)

The accumulation of heavy metals in the environment may have a wide range of health effects on animals and humans. Thus, in this study, the concentrations of arsenic (As), cadmium (Cd), lead (Pb), and mercury (Hg) in the blood and tissues (liver and kidney) of Portuguese common buzzards (Buteo buteo) were determined by inductively coupled plasma-mass spectrometer (ICP-MS) in order to monitor environmental pollution to these elements. In general, Hg and As were the elements which appeared in the highest and lowest concentrations, respectively. A highest percentage of non-detected concentration was found for blood Cd (94.6 %) but, in turn, it was the only metal that was detected in all kidney samples. The kidney was the analyzed sample which showed the highest concentrations of each element evaluated. Statistically, significant differences among blood, liver, and kidney samples were observed for As and Cd (P?相似文献   

Dissolved and particulate metals in water from Sonora Coast: a pristine zone of Gulf of California

The purpose of this study was to investigate the distribution of metals (Cd, Pb, Hg, Cu, Fe, Mn, and Zn) in dissolved and particulate fractions in seawater from Bacochibampo Bay, Northern part of Mexico. Water samples were collected from November 2004 to October 2005. Metal analysis was done by graphite furnace atomic absorption spectroscopy. Results indicated highest concentrations of dissolved Cd and Zn in the sites localized at the mouth and center of the bay. During summer and spring, the highest levels of Cd, Mn, and Fe were detected, Zn in fall, and Pb and Cu in winter and spring. Mercury was the only metal that was not found in this fraction. In particulate fraction, Fe, Hg, and Mn were the most abundant elements in all the sampling sites, followed by Zn, Cu, Pb, and Cd. The highest levels of the majority of the metals were observed in the coastline, suggesting a continental and/or urban source for these chemicals. The highest level of Cd was detected during the summer and the rest of the metals in the fall. Statistically significant correlations were observed between dissolved and particulate forms of Pb:Mn, Cu:Fe, and Cu:Mn. The mean partition coefficient values were as follows: Fe>Mn>Cu>Pb>Cd>Zn. All dissolved metal concentrations found, except Pb, were lower than EPA-recommended water quality values. The levels of dissolved metals in this study reveal low bioavailability and toxic potential. However, further toxicological and sediment chemistry studies in this area are needed for a full risk assessment.     

Comparative bioaccumulation of trace metals using six filter feeder organisms in a coastal lagoon ecosystem (of the central-east Gulf of California)

The Tobari Lagoon, located in the central-east coast of the Gulf of California, receives effluents from the Yaqui Valley, one of the most extensive agricultural areas of México. The Tobari Lagoon also receives effluents from nearby shrimp farms and untreated municipal sewage. Surface sediment samples and six different species of filter feeders (Crassostrea corteziensis, Crassostrea gigas, Chione gnidia, Anadara tuberculosa, Chione fluctifraga, and Fistulobalanus dentivarians) were collected during the dry and the rainy seasons and analyzed to determine concentrations of cadmium (Cd), copper (Cu), mercury (Hg), lead (Pb), and zinc (Zn). Seasonal variations in metal concentrations in sediment were evident, especially for Cd, Cu, Hg, and Zn. The total and bioavailable concentrations of the five metals are not elevated in comparison to other areas around the world. The percentages of bioavailable respect to total concentrations of the metals varied from 0.6 % in Hg to 50.2 % for Cu. In the organisms, Hg showed the lowest concentrations (ranged from 0.22 to 0.65 μg/g) while Zn showed the highest (ranged from 36.6 to 1,702 μg/g). Linear correlations between the levels of Cu, Pb, and Zn in the soft tissues of C. fluctifraga and C. gnidia, and A. tuberculosa and C. gnidia were found. Seasonal and interspecies variations in the metal levels in filter feeders were found; F. dentivarians, C. corteziensis, and C. gigas exhibited the highest levels, could be used as biomonitors of metals contamination in this area.     

Biosorption properties of Cd(II), Pb(II), and Cu(II) of extracellular polymeric substances (EPS) extracted from Aspergillus fumigatus and determined by polarographic method

Extracellular polymeric substances (EPS) were extracted from Aspergillus fumigatus using cationic exchange resin technique. The EPS were mainly composed of polysaccharide and low quantities of protein and nucleic acid. Biosorption of Cd(II), Pb(II), and Cu(II) of EPS was investigated as a function of pH using differential pulse polarography and the Ruzic model. Results showed that the EPS biosorption capacity determined using either the direct titration curves i?=?f(C _M) or the method proposed by Ruzic (Analytica Chimica Acta 140:99–113, 1982) were coincident. Cu(II) had the highest affinity with EPS followed by Pb(II) and Cd(II). The total number of binding sites for Cu(II) and Cd(II) increased with pH in the range of 4.0–7.0. Similar trend was observed for Pb(II) at pH?4.0–5.0, while precipitates were observed at pH?6.0 and 7.0. The conditional binding constants of these three metals displayed low levels of fluctuation with pH and ranged from 4.02?±?0.02 to 5.54?±?0.05.     

Heavy metals in Patella caerulea (Mollusca, Gastropoda) in polluted and non-polluted areas from the Iskenderun Gulf (Mediterranean Turkey)

The concentrations of Cd, Cu, Zn, Fe, Pb, Ni, and Co were measured in gastropod mollusks Patella caerulea in the Mediterranean area. The organisms were collected at two coastal sites in Iskenderun Gulf during winter, spring, summer, and autumn 2008. Samples of the digestive gland, gill, and muscle were analyzed for heavy metals. The aim of study is to determine heavy metal levels in tissues of P. caerulea in different locations. Tissues of P. caerulea from the polluted site showed metal concentrations appreciably higher than unpolluted organisms. The highest metal levels were registered in the digestive gland of P. caerulea. Generally, digestive gland and gills showed higher metal concentrations than muscle. The average concentrations of heavy metals analyzed exhibited the following decreasing order: Fe > Zn > Cu > Ni > Cd > Pb > Co for both stations 1 and 2. Seasonal changes in metal concentrations were observed in the tissues of P. caerulea from a polluted and an unpolluted population.     

Effect of heavy metals (Cu, Pb, and As) on the ultrastructure of Sargassum pallidum in Daya Bay, China

Concentrations of Cu, Pb, and As were determined in seawater, surface sediment, Sargassum pallidum collected from the Daya Bay, China. The influence of metal contamination on the marine alga was investigated at chemical and ultrastructural level. Mean concentrations of Cu (19.44 mg kg^?1) and Pb (33.99 mg kg^?1) were found to be high in sediment, whereas concentration of As (122.29 mg kg^?1) in S. pallidum was higher than that in water and sediment. The ultrastructure of S. pallidum cells was anomalous and aberrant. Energy-dispersive x-ray spectroscopic analysis revealed that the nanometal particles in the form of comparatively high-electron density substance diffused in the cell structures constituted by Cu, Pb, As, etc. There is a remarkable similarity or correspondence in the anomalous elements between the geochemistry and the botanic cell, and the heavy metals have potential hazardous effect on the ocean ecology system in Daya Bay.     

Mercury levels in myliobatid stingrays (Batoidea) from the Gulf of California: tissue distribution and health risk assessment

With the aim of knowing Hg distribution in selected tissues of myliobatid stingrays and assessing health risk to Mexican population, Hg concentration was determined in the muscle and liver of four ray species. Total Hg levels were determined by cold vapor atomic absorption spectrophotometry. With respect to the muscle, devil rays (Mobula spp.) showed lower Hg levels (<0.22 μg g^?1) than Rhinoptera steindachneri (0.37?±?0.25 μg g^-1 wet weight). In the case of the liver, the highest Hg concentration was found in Mobula japanica (0.22?±?0.01 μg g^?1). Hg levels in the muscle and liver varied according to the species; in some case, the liver accumulated more Hg than the muscle and the opposite pattern in other cases. R. steindachneri showed a significant difference between both tissues. No significant differences of Hg levels between males and females and between juveniles and adult specimens of R. steindachneri were found. Positive correlation between Hg concentrations and disc width and total weight was not significant for R. steindachneri (Rs?<?0.36, p?>?0.05). Batoids showed Hg values below the Mexican (NOM-027-SSA1-1993) limits (1.0 μg g^?1) in fishes for human consumption. The species with the highest potential of Hg transfer to human population is R. steindachneri; however, an adult (70 kg) could consume approximately 943 g per week without representing a health risk. Nevertheless, further and continuous monitoring is needed since batoids support an important fishery in Mexican waters, being a food resource and income to coastal communities.     

Accumulation of Cu, Cd, Cr, Mn and Pb from artificially contaminated soil by Bacopa Monnieri

The metal accumulation potential of Bacopa monnieri L. was assessed under simulated laboratory conditions. This study was carried out in mixed metals (Cu, Cd, Pb, Cr, Mn) condition and repeated exposures in artificial contaminated soil. The growing shoots were planted in garden subsoil containing 3, 16, 32, 64, 160 M each of the above metals. After 8 weeks, plants were refeeded to three times higher concentrations of each metal than initially used to assess the maximum accumulating potential of the metals. The accumulation of the metals by the root and shoot was concentration and duration dependent. The metal accumulation was considerably higher in the fine root than in the shoot and showed the following order : Mn > Cr > Cu > Cd > Pb. The plants showed high tolerance to the metals as no visible phytotoxic symptom was produced after 8 weeks. However, as a result of combined metal toxicity, chlorophyll content was reduced by 62% after 12 weeks. The highest metal concentration was lethal to the plant at 16 weeks. In view of their high tolerance, the plants of B. monnieri may be considered for the amelioration of industrially-polluted wetlands experiencing regular flushing of wastewaters.     

Pollution, fractionation, and mobility of Pb, Cd, Cu, and Zn in garden and paddy soils from a Pb/Zn mining area

This study was conducted to investigate the pollution load index, fraction distributions, and mobility of Pb, Cd, Cu, and Zn in garden and paddy soils collected from a Pb/Zn mine in Chenzhou City, China. The samples were analyzed using Leleyter and Probst’s sequential extraction procedures. Total metal concentrations including Pb, Cd, Cu, and Zn exceeded the maximum permissible limits for soils set by the Ministry of Environmental Protection of China, and the order of the pollution index was Cd > Zn > Pb > Cu, indicating that the soils from both sites seriously suffered from heavy metal pollution, especially Cd. The sums of metal fractions were in agreement with the total contents of heavy metals. However, there were significant differences in fraction distributions of heavy metals in garden and paddy soils. The residual fractions of heavy metals were the predominant form with 43.0% for Pb, 32.3% for Cd, 33.5% for Cu, and 44.2% for Zn in garden soil, while 51.6% for Pb, 40.4% for Cd, 40.3% for Cu, and 40.9% for Zn in paddy soil. Furthermore, the proportions of water-soluble and exchangeable fractions extracted by the selected analytical methods were the lowest among all fractions. On the basis of the speciation of heavy metals, the mobility factor values of heavy metals have the following order: Cd (25.2–19.8%) > Cu (22.6–6.3%) > Zn (9.6–6.0%) > Pb (6.7–2.5%) in both contaminated soils.     

Butyltin contamination of sediments and benthic fish from the East,Gulf and Pacific coasts of the United States

Butyltin concentrations were determined in sediments, tissues and stomach contents of fish collected in 41 embayments on the East, Gulf and Pacific coasts of the U.S.A. between 1986 and 1991 as part of the National Oceanic and Atmospheric Administration's (NOAA) National Benthic Surveillance Project (NBSP). A total of 99 sediments, 108 fish liver samples from 11 fish species, and 10 composites of fish stomach contents were analyzed for tetrabutylin, tributylin, dibutylin and monobutylin. Tributyltin (TBT) was detected (i.e. > 10 ng/g) in 38 of the sediments samples analyzed and was generally the predominant bulytin present; concentrations of total butyltins ranged from 15 to 1600 ng/g wet weight. The highest concentrations were found in sediments from urban sites, especially sites on the West coast. Many of the fish liver and stomach contents samples also contained butyltins. Tributyltin represented 83 (7.1)% [mean (SEM); n=15], 64 (6.6)% (n=12) and 36 (7.8)% (n=12) of the total butyltins in livers from white croaker, winter flounder and Atlantic croaker, respectively, suggesting possible species differences in biotransformation of TBT. The concentrations of butyltins in stomach contents indicated that diet can be a significant route of exposure of fish to butyltins. Between 1986 and 1991 butyltin concentrations in sediments and fish generally appeared to be declining; however, no statistically significant temporal trends were observed at individual sites or for the sites overall.The U.S. government's right to retain a non-exclusive, royalty free license in and to any copyright is acknowledged.     

Determination of heavy metals (Cd, Cr, Cu, Fe, Ni, Pb, Zn) by ICP-OES and their speciation in Algerian Mediterranean Sea sediments after a five-stage sequential extraction procedure

Surface sediment samples (n = 18) were collected from the Algerian Mediterranean coasts and analyzed for seven metals using inductively coupled plasma-optical emission spectrometry in order to asses the distribution and bioavailability of metals and to study the anthropogenic factors affecting their concentrations. Sediment samples were size-fractionated into three sizes: 1,080–500 (coarse), 500–250 (medium), and <250 mm (fine). Bulk sediments were subjected to both sequential extraction and total digestion to evaluate the reliability of the sequential extraction procedure (SEP), while the fractions have been only sequentially extracted for metals speciation. The metals were sequentially extracted into five phases namely exchangeable (P1), carbonates (P2), Fe–Mn oxides (P3), organic (P4) and residual (P5). Metal recoveries in sequential extractions were ±20% of the independently measured total metal concentrations; the high recovery rates indicate the good reliability of the SEP used in this study. Correlation coefficients indicated that the grain size has an effect on the distribution of metals in the investigated samples. The order of metal levels in the fractions was medium > fine > coarse for all the metals. The average total extractable metal concentrations for Cd, Cr, Cu, Fe, Ni, Pb, and Zn were 1.1, 8.8, 4.7, 1,291.3, 13.9, 5.7 and 20.4 μg/g, respectively. The northeastern shelf had the lowest metal levels while the highest were in northwestern part mainly due to the significant tourism activities in the northwestern part. Comparison of our results to Earth’s crust values and to previous studies points out that our samples were relatively unpolluted with respect to the heavy metals investigated; most of the metals are not from anthropogenic sources. Enrichment factors as the criteria for examining the impact of the anthropogenic sources of heavy metals were calculated, and it was observed that the investigated samples were not contaminated with Cr, Cu, and Fe, moderately contaminated with Ni, Pb, and Cd, and contaminated with Cd in some sites. The P5 phase had the highest percents of Cr, Cu, Fe, Ni, and Zn. Cadmium and lead were predominant in the P4 phase, while Cu, Fe and Zn were distributed in the order P5 > P3 > P4 > P2 > P1. The following order of bioavailability was found with the heavy metals Pb > Cr > Cd > Ni > Zn > Cu > Fe.     

Trace Level Determination of U, Zn, Cd, Pb and Cu in Drinking Water Samples

The concentration of uranium has been assessed in drinking water samples collected from different locations in Bathinda district, Punjab, India. The water samples are taken from hand pumps and tube wells. Uranium is determined using fission track technique. Uranium concentration in the water samples varies from 2.23± 0.05 to 87.05± 0.29 μg/L. These values are compared with safe limit values recommended for drinking water. The uranium concentration in almost all drinking water samples is found to be more than the safe limit. Analysis of some heavy metals viz. Zn, Cd, Pb and Cu in water is made. The concentration of sodium, potassium, calcium, magnesium, chlorine and total hardness along with the pH value and conductivity of the water samples are measured. Some of the samples show stunningly high values of these parameters.     

Toxic metal (Pb, Cd, As and Hg) and organochlorine residue levels in hake (Merluccius merluccius) from the Marmara Sea, Turkey

Toxic metals (Pb, Cd, As and Hg) and organochlorine residue levels were measured in hake (Merluccius merluccius) from the Marmara Sea. Biota samples were collected by a trawling cruise of the R/V ARAR in August and December 2009. The concentrations of toxic metals varied between Pb, 3.23-14.4; Cd, <0.01-2.14; Hg, 0.01-0.18 and As, 0.01-0.21 [Formula: see text]g g(-1) dry wt. Pb levels in the Marmara Sea were found to be higher than the critical limits set by the both Turkish Ministry of Environment for Aquatic Products (1 μg g(-1) wet wt.) and European countries (2.0 μg g(-1), UNEP 1985). In contrast, As and Hg levels were found to be lower than the critical limits for two periods. Cd contents of fish from the Marmara Sea were also comparable to or slightly lower than contents of fish from the Southern Black Sea Shelf. The results of organochlorine residues ranged between total HCH, <0.05 and 99 ng g(-1); endrin, <0.001 and 381 ng g(-1); alpha-endosulphan, <0.05 and 90 ng g(-1); beta-endosulphan, <0.05 and 15.3 ng g(-1); o,p DDE, 3.5 and 52.4 ng g(-1); p,p DDE, 7.4 and 139 ng g(-1); o,p DDD, 1.5 and 90.2 ng g(-1) and p,p DDD, 2.7 and 86 ng g(-1) wet weight. The rivers for the distribution of organochlorine levels in the Marmara Sea ordered from highest to lowest as Dil R. > Susurluk R. > Biga R. > G?nen R. The high levels of o,p and p,p DDE, and o,p and p,p DDD compounds, which are metabolites of DDT, indicate its illegal use. Toxic metal and organochlorine residue levels of fish are significantly higher than levels from the Mediterranean Sea.     

Determination of Pb and Cd in road dusts over the period in which Pb was removed from petrol in the UK

It is commonly agreed that automobile exhaust has been the most important source of Pb pollution in urban areas, and that Cd may come from wear and tear of tyres. This study evaluates the fall in Pb concentrations in road dusts in Manchester as a consequence of the removal of Pb from petrol in January 2000. In the work presented here a slurry graphite furnace atomic absorption methodology for the determination of Pb and Cd in road dusts has been developed and is compared with an acid digestion method in terms of efficiency. The reproducibility and accuracy of the results obtained by acid digestion and the slurry method have been studied and a certified reference material CRM 038 was analysed to confirm the reliability of the proposed methods. Different factors were evaluated throughout this work including: (i) the effect of traffic density on Pb and Cd levels in road dust samples collected weekly during the period of May 1999 until September 2000; (ii) comparison between the Pb and Cd levels in a busy road and a residential street; (iii) the effect of distance from the source on Pb and Cd levels; The results of these experiments show a reduction in Pb levels over the sampling period. The relationship between road dust particle size and Pb and Cd concentration was also investigated in the 4-250 microns size range using the slurry method, showing that there is a relationship between metal concentration and particle size; the highest concentrations being for the smallest particle size.     

SI-traceable certification of Cu, Cr, Cd and Pb in sediment and fly ash candidate reference materials

Many fields in environmental analytical chemistry deal with very low limits and thresholds as set by governmental legislations or transnational regulations. The need for the accuracy, comparability and traceability of analytical measurements in environmental analytical chemistry has significantly increased and total uncertainties are even asked for by accreditation bodies of environmental laboratories. This paper addresses achieving these goals to guarantee accuracy, quality control, quality assurance or validation of a method by means of certified reference materials. The assessment of analytical results in certified reference materials must be as accurate as possible and every single step has to be fully evaluated. This paper presents the SI-traceable certification of Cu, Cr, Cd and Pb contents in geological and environmentally relevant matrices (three sediments and one fly ash sample). Certification was achieved using isotope dilution (ID) ICPMS as a primary method of measurement. In order to reduce significantly the number of analytical steps and intermediate samples a multiple spiking approach was developed. The full methodology is documented and total uncertainty budgets are calculated for all certified values. A non-element specific sample digestion process was optimised. All wet chemical digestion methods examined resulted in a more or less pronounced amount of precipitate. It is demonstrated that these precipitates originate mainly from secondary formation of fluorides (essentially CaF2) and that their formation takes place after isotopic equilibration. The contribution to the total uncertainty of the final values resulting from the formation of such precipitates was in general < 0.1% for all investigated elements. Other sources of uncertainty scrutinised included the moisture content determination, procedural blank determination, cross-contamination from the different spike materials, correction for spectral interferences, instrumental background and deadtime effects, as well as the use of either certified values or IUPAC data in the IDMS equation. The average elemental content in the sediment samples was 30-130 micrograms g-1 for Pb, 0.5-3 micrograms g-1 for Cd and 50-70 micrograms g-1 for Cu. Cr was measured in one sample and was about 60 micrograms g-1. The concentrations in the fly ash sample were up to 2 orders of magnitude higher. Expanded uncertainty for the investigated elements was about 3% (coverae factor k = 2) except for Cr, (measured by high resolution ICPMS), for which the expanded uncertainty was about 7% (k = 2).