Mapping of tritium emissions using absorption vapour samplers

Püspökszilágy Radioactive Waste Treatment and Disposal Facility (RWTDF) is a typical near-surface engineered repository designated to store low- and intermediate-level wastes from various institutes, research facilities and hospitals in Hungary. Two automatic combined ¹⁴C–tritium sampling units installed at the facility sample the air 2 m above surface. The one installed near the vaults detects tritium (T) activities two orders of magnitude higher than the far reference sampling unit. To localize the T emissions, 19 small absorption vapour samplers filled with silica gel were settled onto the ground surface. After the saturation of the silica gel, the water was recovered and its T concentration was measured with a low-background liquid scintillation counter. The absorption vapour samplers are cheap, simple and easy-to-use. We present the samplers and the T distribution map constructed from the data, which helps to localize the T emission.     

Design of a novel comfort liner for a motorcycle helmet

Natural fibres are nowadays increasingly being employed for producing protective clothing and sportswear. Due to economic and/or environmental considerations they are replacing synthetic materials. The present work provides an insight into the design and development of a novel comfort liner for a motorcycle helmet. The liner is produced from wool and Tunisian alfa fibre. The plant of the alfa fibre is abundantly available in Tunisia. Furthermore, we describe a design concept for a liner that uses these natural fibres and phase change material to improve sweat absorption and perception of thermal comfort. The raw material, the processes involved and the solution to use the phase change material are analysed. The novel comfort liner can facilitate breathability and evaporative transfer of heat in the safety helmet. In addition, it increases comfort, well-being, and provides an indirect message to use natural fibres for textile support to preserve our environment.     

Climate-proof planning for flood-prone areas: assessing the adaptive capacity of planning institutions in the Netherlands

It is generally acknowledged that adapting low-lying, flood-prone deltas to the projected impacts of climate change is of great importance. Deltas are densely populated and often subject to high risk. Climate-proof planning is, however, not only a new but also a highly complex task that poses problems for existing institutional and administrative structures, which are the product of times in which climate issues were of little importance. This paper assesses the capacity of the historically grown Dutch planning institutions to promote climate-proof planning for flood-prone areas. The Adaptive Capacity Wheel provides the methodological framework. The analysis focuses on two planning projects in the west of the Netherlands: the Zuidplas Polder project at the regional level and the Westergouwe project at the local level. It is shown that the planning institutions involved in these projects enable climate-proof planning, but to a limited extent. They face five institutional weaknesses that may cause risks on the long term. To climate-proof urban developments in flood-prone areas, it is necessary to break through the strong path–dependent development of planning institutions and to build in more flexibility in existing rules and procedures.     

An integrated decision-support process for adaptation planning: climate change as impetus for scenario planning in an agricultural region of Canada

The amount of information required to adapt to climate change is vast: downscaled climate projections, information on environmental impact, sectoral performance, external drivers, regional strategies, policies and practices. It can be argued that most of this information is accessible at the community/regional level, and thus, the important challenges to adaptation are not information gaps, but constraints created by fragmented planning decisions and a sector-by-sector basis for financial and human resource allocations. To strategically address this through adaptation planning, we developed and tested a place-based decision-making framework that creates an integrated platform for considering regional and global sectoral drivers in Eastern Ontario, Canada. Using available socioeconomic and biophysical information from regional authorities, alternative future scenarios were used to describe the range of socioeconomic futures and their vulnerabilities to climate change. We found that: (1) integration of diverse sets of available data (rather than narrowly focused sectoral assessments) helped identify shared common objectives (maximizing the long-term environmental, economic, social well-being within the region), (2) a high degree of congruence existed as the key drivers of change, irrespective of sector, (3) exploring the future scenarios highlighted shared regional priorities and helped identify adaptation priorities requiring more integrated regional planning.     

Modeling of agricultural drought risk pattern using Markov chain and GIS in the western part of Bangladesh

The aim of the study is to assess the agricultural drought risk condition in the context of global climate change in the western part of Bangladesh that covers about 45% area of the country for the period of 1960–2011. Drought Index (DI) and Drought Hazard Index (DHI) have been calculated by Markov Chain analysis and that of Drought Vulnerability Index (DVI) from socioeconomic and physical indicators. The DI values show that the northern part in general is more drought-prone, having less crops prospect, whereas the southern part is less drought-prone with high crop potentiality. The probability of extreme drought occurrence increases in recent decades in some parts as a result the drought events become more frequent in the areas. The DHI ranges from 15 to 32, and northern part suffers from more extreme drought hazards than that of southern part. DVI also indicates that northern part is exposed to high to very high drought vulnerability as higher percentage of illiterate people are involved in agricultural practices and high percentage of irrigation to cultivable land, but southern part exposed to moderate to low vulnerability because of low values of vulnerability indicators. Finally, agricultural drought exists at high risk condition in northern part and low in southern parts and 21.63, 26.54 and 29.68% of the area poses very high, high and moderate risk, respectively. So, immediate adaptation measures are needed keeping in mind climate features like rainfall and temperature variability, drought risk and risk ranking to make viable adaptation measures.     

Assessing groundwater quality and its sustainability in Joypurhat district of Bangladesh using GIS and multivariate statistical approaches

Sustainable groundwater quality is a key global concern and has become a major issue of disquiets in most parts of the world including Bangladesh. Hence, the assessment of groundwater quality is an important study to ensure its sustainability for various uses. In this study, a combination of multivariate statistics, geographical information system (GIS) and geochemical approaches was employed to evaluate the groundwater quality and its sustainability in Joypurhat district of Bangladesh. The results showed that the groundwater samples are mainly Ca–Mg–HCO₃ type. Principal component analysis (PCA) results revealed that geogenic sources (rock weathering and cation exchange) followed by anthropogenic activities (domestic sewage and agro-chemicals) were the major factors governing the groundwater quality of the study area. Furthermore, the results of PCA are validated using the cluster analysis and correlation matrix analysis. Based on the groundwater quality index (GWQI), it is found that all the groundwater samples belong to excellent to good water quality domains for human consumption, although iron, fluoride and iodide contaminated to the groundwater, which do not pose any significant health hazard according to World Health Organization’s and Bangladesh’s guideline values. The results of irrigation water quality index including sodium adsorption ratio (SAR), permeability index and sodium percentage (Na %) suggested that most of the groundwater samples are good quality water for agricultural uses. The spatial distribution of the measured values of GWQI, SAR, Fe (iron), EC (electrical conductivity) and TH (total hardness) were spatially mapped using the GIS tool in the study area.     

Mapping of the geogenic radon potential in France to improve radon risk management: methodology and first application to region Bourgogne

In order to improve regulatory tools for radon risk management in France, a harmonised methodology to derive a single map of the geogenic radon potential has been developed. This approach consists of determining the capacity of the geological units to produce radon and to facilitate its transfer to the atmosphere, based on the interpretation of existing geological data. This approach is firstly based on a classification of the geological units according to their uranium (U) content, to create a radon source potential map. This initial map is then improved by taking into account the main additional parameters, such as fault lines, which control the preferential pathways of radon through the ground and which can increase the radon levels in soils. The implementation of this methodology to the whole French territory is currently in progress. We present here the results obtained in one region (Bourgogne, Massif Central) which displays significant variations of the geogenic radon potential. The map obtained leads to a more precise zoning than the scale of the existing map of radon priority areas currently based solely on administrative boundaries.     

A biomonitoring plan for assessing potential radionuclide exposure using Amchitka Island in the Aleutian chain of Alaska as a case study

With the ending of the Cold War, the US and other nations were faced with a legacy of nuclear wastes. For some sites where hazardous nuclear wastes will remain in place, methods must be developed to protect human health and the environment. Biomonitoring is one method of assessing the status and trends of potential radionuclide exposure from nuclear waste sites, and of providing the public with early warning of any potential harmful exposure. Amchitka Island (51 degrees N lat, 179 degrees E long) was the site of three underground nuclear tests from 1965 to 1971. Following a substantive study of radionuclide levels in biota from the marine environment around Amchitka and a reference site, we developed a suite of bioindicators (with suggested isotopes) that can serve as a model for other sites contaminated with radionuclides. Although the species selection was site-specific, the methods can provide a framework for other sites. We selected bioindicators using five criteria: (1) occurrence at all three test shots (and reference site), (2) receptor groups (subsistence foods, commercial species, and food chain nodes), (3) species groups (plants, invertebrates, fish, and birds), (4) trophic levels, and (5) an accumulator of one or several radionuclides. Our major objective was to identify bioindicators that could serve for both human health and the ecosystem, and were abundant enough to collect adjacent to the three test sites and at the reference site. Site-specific information on both biota availability and isotope levels was essential in the final selection of bioindicators. Actinides bioaccumulated in algae and invertebrates, while radiocesium accumulated in higher trophic level birds and fish. Thus, unlike biomonitoring schemes developed for heavy metals or other contaminants, top-level predators are not sufficient to evaluate potential radionuclide exposure at Amchitka. The process described in this paper resulted in the selection of Fucus, Alaria fistulosa, blue mussel (Mytilus trossulus), dolly varden (Salvelinus malma), black rockfish (Sebastes melanops), Pacific cod (Gadus macrocephalus), Pacific halibut (Hippoglossus stenolepis), and glaucous-winged gull (Larus glaucescens) as bioindicators. This combination of species included mainly subsistence foods, commercial fish, and nodes on different food chains.     

Mapping of cosmic radiation dose in Croatia

The Earth is continually bombarded by high-energy particles coming from the outer space and the sun. These particles, termed cosmic radiation, interact with nuclei of atmospheric constituents and decrease in intensity with depth in the atmosphere. Measurements of photon and gamma radiation, performed with a Radiameter at 1 m above the ground, indicated dose rates of 50-100 nSv/h.The neutron dose rate was measured with the CR-39 track etch detector calibrated by the CERN-EU high-energy Reference Field (CERF) facility. Correlation between neutron dose rates and altitudes at 36 sites was examined in order to obtain a significant positive correlation coefficient; the resulting linear regression enabled estimation of a neutron dose at particular altitude. The measured neutron dose rate in Osijek (altitude of 89 m, latitude of 45.31° N) was 110 nSv/h.     

Evaluation of the mutagenic potential of some compounds using Salmonella typhimurium

The mutagenicity of sodium nitrite, potassium chromate, O-tolidine, and smoke condensate from tobacco was shown on Salmonella typhimurium TA 1535. Sodium nitrite was definitely mutagenic on TA 1535 without S-9 mix. Potassium chromate without S-9 mix was also mutagenic on TA 1535. However, addition of S-9 mix resulted in a complete loss of potassium chromate mutagenicity. O-tolidine with and without S-9 mix elicited a very weak and variable mutagenic effect for strain TA 1535. Smoke condensate from pipe tobacco without S-9 mix elicited a weak mutagenic effect, whereas with S-9 mix it showed no mutagenicity on TA 1535.     

Development of termites severity probability map of futa campus area using geographical information system (GIS) technology

Environment, Development and Sustainability - Siting of buildings in rural urban development requires that the prevalence of termite activities is considered. The severity of termite activities...     

Entry points for climate-informed planning for the water resources and agriculture sectors in Cambodia

Incorporating climate change concerns into national development planning allows adaptation to happen in harmony with the sustainable development of a country. Cambodia has received international support to enable climate change-resilient development; “mainstreaming climate change” is one of the key recent strategies. This article aims to identify entry points for integrating climate change concerns into national development planning, especially for the water resources and agriculture sectors. The study uses institutional ethnography research methods with informants drawn from government organisations, local academic institutions, and development partners, together with content analysis of key policy documents. It was found that the Cambodian national planning process restricts the involvement of other actors such as researchers, civil society, and private sector; yet flexible, in that it provides opportunities for the inclusion of climate change and other related concerns. The study identified specific entry points in key policy documents, such as the National Strategic Development Plans, and ministries’ plans. Other entry points were identified in the development planning process, for example, in the process of development departments and ministries’ plans, and actors such as department planners, and departments of planning of line ministries. Climate-informed planning is now plausible; more significant integration of concerns with future climate change, however, will require more commitment and stronger connections among national planning stakeholders, adaptation actors, and research communities.     

Urban heat island intensity and evaluation of outdoor thermal comfort in Chennai,India

Environment, Development and Sustainability - The variation in the atmospheric conditions of urban areas to the fringe areas is termed as urban heat island and is attributed predominantly to the...     

Identification of potential applications for recycled polymeric multi-material

Abstract

This research aims to characterise a recycled polymeric multi-material, explore potential areas of application for it and analyse the eventual impacts of the introduction of this new recycled material (NRM) on end-of-life activities. Thus, this research presents a practical study regarding recycled polymeric multi-material from toothbrushes. A preliminary characterisation (via density determination, tensile test and dynamic mechanical thermal analysis – DMTA) and data analysis using the Cambridge Engineering Selector (CES-Edupack 2013) software have been done. The study also presents an analysis of the impacts of introducing the NRM into end-of-life activities. Results shows that, based on the properties considered in this study, NRM may have potential for new applications. The impact on recycling networks indicates that it is a positive solution that would improve process variable efficiencies, maintaining material value as long as possible in industrial closed-loop life cycles. However, an in loco analysis of the treatment of waste containing the NRM is necessary.     

基于GIS与栅格数据的安徽省人居环境自然适宜性测评

科学度量人居环境自然背景的适宜性,有助于合理引导人口分布与流动,促进区域人口、资源环境协调发展。运用GIS技术,以250 m×250 m栅格为基本单元,选取气候、地形、水文、地被、自然灾害等因子,构建人居环境自然适宜性评价模型,定量测评安徽省人居环境自然适宜程度,剖析各类型区的适宜性和限制性。研究表明：安徽省人居环境指数介于33.64～74.58之间,人居环境自然适宜性总体较好,绝大部分地区适宜人类居住,适宜性在空间上大体呈现南高北低的态势,与现有人口分布格局相反。一般适宜区面积最广,占安徽省总面积的46.08%;比较适宜区次之,占31.29%;高度适宜区占22.54%;临界适宜区面积最小,仅占0.08%。安徽省近61.16%的人口分布在一般适宜区,高度适宜区与比较适宜区人口所占比例不足40%,临界适宜区人口极为稀少。地形起伏度和水文指数是造成全省人居环境自然适宜性分异的主要因子,测评结果较为客观地反映了安徽省人居环境的自然本底。全省人口生存与发展的空间较大,人口流动与集聚的适宜范围较广。 关键词： 人居环境;自然适宜性;栅格;GIS;安徽省     

A role for strategies in urban climate change adaptation planning: Lessons from London

Regional Environmental Change - Global cities are taking a leadership role in climate change adaptation. Increasing numbers of cities are creating climate adaptation plans and strategies, and a...     

Lean framework for planning redesign proposals to optimise EOL environmental behaviour in WEEE products

The aim of this research was to define a sequence of actions to guide redesign propositions for electrical and electronic equipment products, which minimise negative consequences to the environment after the end of their useful life. Current practices mainly encourage the examination of individual problems as disassembly process and identification of suitable product end-of-life (EOL) treatment strategies. There also exist previous studies that try to incorporate EOL concerns in product design phase. In most cases, the main problem is the limited available EOL information because of its delayed retrieval. The proposed method focuses primarily on minimising this problem. The steps of the analysis performed include the selection of the optimal EOL treatment strategy and, afterwards, the evaluation of its results concerning the environment. In parallel, product design characteristics are grouped and examined concerning their expected significance for the environment in the EOL stage. The results from the previous stages are combined and product improvement actions are proposed for further examination in the redesign stage. The general framework used to conduct all these actions is lean thinking methodology. In the end, results concerning the application of the proposed method on a distribution transformer are presented.     

Assessing site suitability potential for soil and water conservation structures by using modified micro-watershed prioritization method: geomorphometric and geomatic approach

Environment, Development and Sustainability - Efficiency of soil water conservation (SWC) structure depends on its precise locations as well as its success in reducing surface runoff, soil erosion...     

Analysis of transportation carbon emissions and its potential for reduction in China

The transportation industry is an essential sector for carbon emissions mitigation.This paper firstly used the LMDI(Logarithmic Mean Divisia Index)decomposition method to establish factors decomposition model on China’s transportation carbon emission.Then,a quantitative analysis was performed to study the factors influencing China’s transportation carbon emissions from 1991 to 2008,which are identified as transportation energy efficiency,transportation structure and transportation development.The results showed that:(1)The impact of transportation development on transportation carbon emissions showed pulling function.Its contribution value to carbon emissions remained at high growth since 1991 and showed an exponential growth trend.(2)The impact of transportation structure on transportation carbon emissions showed promoting function in general,but its role in promoting carbon emissions decreased year by year.And with the continuous optimization of transportation structure,the promoting effect decreased gradually and showed the inversed"U"trend.(3)The impact of transportation energy efficiency on transportation carbon emissions showed a function of inhibition before pulling.In order to predict the potential of carbon emission reduction,three scenarios were set.Analysis of the scenarios showed that if greater intensity emission reduction measures are taken,the carbon emissions will reduce by 31.01 million tons by 2015 and by 48.81 million tons by 2020.     

国土空间规划对重点开发区域的经济增长效应研究——武汉城市圈规划的经验证据

"多规融合"的国土空间规划兼具区域发展规划和环境规制的功能,是经济新常态下国家平衡经济增长和环境保护的有力政策工具,而各地普遍实施的国土空间规划能否促进重点开发区域的经济增长,有待实证检验。以武汉城市圈空间规划为例,本文利用2002-2012年间湖北省74个县(市、市辖区)域面板数据,采用双重差分倾向得分匹配方法研究国土空间规划对重点开发区域经济增长的影响。实证结果表明:第一,国土空间规划显著地促进了重点开发区域经济的增长,但对区域内不同行政级别的市辖区和县(市)的经济增长速度具有不同的推动作用,具体表现为分别提高市辖区和县(市)级GDP增长率2.4和1.1个百分点,这一结论在对研究方法的匹配技术进行稳健性检验后依然成立。第二,对国土空间规划推动重点开发区域经济增长实现机制的进一步分析表明,武汉城市圈空间规划实施后,由于区域经济一体化进程的加快和地区之间经济联系的加强,武汉作为区域经济增长极,对相邻市、县的经济溢出效应更加明显,从而推动相邻区域的经济增长。上述研究结论对目前广泛实施的国土空间规划具有重要的政策含义,鉴于国土空间规划推动市辖区经济增长的速度要明显快于县或县级市,今后规划政策的调整要在保持重点开发区域整体经济不断提升的同时兼顾地区间的协调发展,避免空间规划的实施导致内部区域发展差距拉大;在重点开发区域经济得到发展的同时,要逐渐形成其规模集聚效应,为农产品主产区和生态功能区的人口转移提供基础,进而带动整个国土空间的可持续发展。