Determination and evaluation of cadmium, lead and nickel in greenhouse soils of Almería (Spain)

This study determines total levels of three (Cd, Pb and Ni) potentially toxic trace elements in western Almería (Spain) greenhouse surface soil horizons using microwave digestion; it establishes the geochemical baseline concentration, and it investigates possible relationships between soil properties and elemental concentrations. The results show that the soil concentration of these heavy metals is lower than mentioned in the European and Spanish normative, but they are higher than those reported by other authors working on agricultural soils. The obtained geochemical baseline concentrations (mg kg(-1)) were: Cd 0.4-0.8, Pb 2.5-89.9 and Ni 16.1-30.7. Using the upper baseline criterion, 88% of greenhouse soils have relatively higher content of heavy metals because of their Cd, Pb and Ni concentration. Moreover, soil properties are related to heavy metals contents suggesting that among Cd, Pb and Ni have a similar origin and those total metal concentrations are controlled primarily by soil compositions.     

Fate of nickel in a lime-stabilized biosolid,a calcareous soil and soil–biosolid mixtures

Soil contamination with anthropogenic metals resulting from biosolid application is widespread around the world. To better predict the environmental fate and mobility of contaminants, it is critical to study the capacity of biosolid-amended soils to retain and release metals. In this paper, nickel adsorption onto a calcareous soil, a lime-stabilized biosolid, and soil–biosolid mixtures (30, 75, and 150 t biosolid/ha) was studied in batch experiments. Sorption experiments showed that (1) Ni adsorption was higher onto the biosolid than the calcareous soil, and (2) biosolid acted as an adsorbent in the biosolid–soil mixtures by increasing Ni retention capacity. The sorption tests were complemented with the estimation of Ni adsorption reversibility by successive applications of extraction solutions with water, calcium (100 mg/L), and oxalic acid (equivalent to 100 mg carbon/L). It has been shown that Ni desorption rates in soil and biosolid-amended soils were lower than 30 % whatever the chemical reagent, indicating that Ni was strongly adsorbed on the different systems. This adsorption/desorption hysteresis effect was particularly significant at the highest biosolid concentration (150 t/ha). Finally, an adsorption empirical model was used to estimate the maximum permissible biosolid application rate using French national guideline. It has been shown that desorption effects should be quantitatively considered to estimate relevant biosolid loadings.     

Distribution,persistence, and fate of mexacarbate in the aquatic environment of a mixed‐wood boreal forest

Abstract

The distribution and persistence of aerially applied mexacarbate were studied in a New Brunswick aquatic forest environment after spraying twice at a dosage of 70 g A.l./ha using a fixed‐wing aircraft. Average droplet density (drops/cm²) and ground deposition (g A.1./ha) between the two applications differed considerably. The values for the first and second applications were 1.7 and 0.73, and 5.2 and 2.0, respectively; but the average NMD (20 μm) and VMD (36 μm) for both applications were nearly the same. The maximum 1‐h postspray concentrations of mexacarbate in the stream and pond waters were 0.73 and 18.74 ppb, respectively. Concentrations fell rapidly to below detection limits within 12 h in stream and within 3 d in pond water. Cattails (Typha latifolia), manna grass (Glyceria borealis) and bog moss (Sphagnum sp.) collected from the pond contained peak 1‐h postspray concentrations of 720, 482 and 81 ppb, respectively. The concentration levels decreased rapidly and the average half‐lives of the chemical in them were about 3.9, 8.5 and 2.0 h. Bog moss, stream moss (Fontinalis sp.), watercress (Nasturtium officinalis), buttercup (Ranunculus aquatilis) and green alga (Drapamaldia sp.) sampled from the stream sites did not contain measurable levels of mexacarbate. Also, caged and wild tadpoles (Rana clamitans melanota) from the pond, and brook trout (Salvelinus fontinalis) (caged and wild), Atlantic salmon (Salmo salar) (wild) and mayfly nymphs (Ephemeralla sp.) collected from the stream did not contain any of the material. Mexacarbate was not detected in stream and pond sediments. The demethylated products, 4‐methylamino and 4‐amino‐3,5‐xylyl methylcarbamates and the phenol, 4‐dimethylamino‐3,5‐xylenol, were frequently detected as metabolites in water and in the aquatic plants. The presence of these compounds showed that demethylation and hydrolytic routes are the major metabolic pathways for the dissipation of mexacarbate from these substrates.     

Environmental prevalence,fate, impacts,and mitigation of microplastics—a critical review on present understanding and future research scope

Environmental Science and Pollution Research - Microplastics are considered to be ubiquitous and widespread emerging contaminants. They are persistent in the nature and pose considerable harm to...     

Characteristics and treatment of greywater—a review

Safe and sufficient quantity of water is necessary for a healthy growth of human beings. The gap between water demand and available water supply is increasing day by day. Proper sanitation, especially decentralized approach, can solve the problem of water supply and wastewater management and that can be done by reuse of greywater. Typically, from a household, greywater (GW) flow is around 65 % of the total wastewater flow. Further light greywater is around 50 % of the total GW. Hence, GW has a high potential for recycle and reuse. The aim of this article is to reveal the present state of art in GW treatment and to identify the further scope for research. Present article contains a review on per capita GW generation, GW characteristics, and its treatment. Around 22 treatment systems comprising different treatment processes are discussed in detail for removal efficiency of pollutants, effluent concentrations and their compliance with wastewater reuse guidelines and standards. Constructed wetland and filtration were found efficient in the removal of most of the reuse parameters compared to other technologies. Anaerobic followed by aerobic system with post-disinfection unit may be a sustainable option for GW treatment for reuse. There is a need to develop the technologies for GW treatment at household level to increase the reuse practises at grass root level. Further, there is need of development of flow diagram with different technologies by targeting the type of reuse (flushing, gardening, agriculture, etc.).     

The use of vegetation,bees, and snails as important tools for the biomonitoring of atmospheric pollution—a review

The continuous discharge of diverse chemical products in the environment is nowadays of great concern to the whole world as some of them persist in the environment leading to serious diseases. Several sampling techniques have been used for the characterization of this chemical pollution, although biomonitoring using natural samplers has recently become the technique of choice in this field due to its efficiency, specificity, and low cost. In fact, several living organisms known as biomonitors could accumulate the well-known persistent environmental pollutants allowing their monitoring in the environment. In this work, a review on environmental biomonitoring is presented. The main sampling techniques used for monitoring environmental pollutants are first reported, followed by an overview on well-known natural species used as passive samplers and known as biomonitors. These species include conifer needles, lichen, mosses, bees and their byproducts, and snails, and were widely used in recent research as reliable monitors for environmental pollution.

     

Performance enhancement of a solar still using a V-groove solar air collector—experimental study with energy,exergy, enviroeconomic,and exergoeconomic analysis

Environmental Science and Pollution Research - This paper intended to evaluate the performance of a new design of solar still integrated with a V-groove solar air collector. In this system, an air...     

Geochemical and mineralogical characterization of a neutral, low-sulfide/high-carbonate tailings impoundment, Markušovce, eastern Slovakia

Tailings deposits generated from mining activities represent a potential risk for the aquatic environment through the release of potentially toxic metals and metalloids occurring in a variety of minerals present in the tailings. Physicochemical and mineralogical characteristics of tailings such as total concentrations of chemical elements, pH, ratio of acid-producing to acid-neutralizing minerals, and primary and secondary mineral phases are very important factors that control the actual release of potentially toxic metals and metalloids from the tailings to the environment. The aims of this study are the determination of geochemical and mineralogical characteristics of tailings deposited in voluminous impoundment situated near the village of Marku?ovce (eastern Slovakia) and identification of the processes controlling the mobility of selected toxic metals (Cu, Hg) and metalloids (As, Sb). The studied tailings have unique features in comparison with the other tailings investigated previously because of the specific mineral assemblage primarily consisting of barite, siderite, quartz, and minor sulfides. To meet the aims, samples of the tailings were collected from 3 boreholes and 15 excavated pits and subjected to bulk geochemical analyses (i.e., determination of chemical composition, pH, Eh, acid generation, and neutralization potentials) combined with detailed mineralogical characterization using optical microscopy, X-ray diffraction (XRD), electron microprobe analysis (EMPA), and micro-X-ray diffraction (μ-XRD). Additionally, the geochemical and mineralogical factors controlling the transfer of potentially toxic elements from tailings to waters were also determined using short-term batch test (European norm EN 12457), sampling of drainage waters and speciation–equilibrium calculations performed with PHREEQC. The tailings mineral assemblage consists of siderite, barite, quartz, and dolomite. Sulfide minerals constitute only a minor proportion of the tailings mineral assemblage and their occurrence follows the order: chalcopyrite?>?pyrite?>?tetrahedrite?>?arsenopyrite. The mineralogical composition of the tailings corresponds well to the primary mineralization mined. The neutralization capacity of the tailings is high, as confirmed by the values of neutralization potential to acid generation potential ratio, ranging from 6.7 to 63.9, and neutral to slightly alkaline pH of the tailings (paste pH 7.16–8.12) and the waters (pH 7.00–8.52). This is explained by abundant occurrence of carbonate minerals in the tailings, which readily neutralize the acidity generated by sulfide oxidation. The total solid-phase concentrations of metal(loid)s decrease as Cu?>?Sb?>?Hg?>?As and reflect the proportions of sulfides present in the tailings. Sulfide oxidation generally extends to a depth of 2 m. μ-XRD and EMPA were used to study secondary products developed on the surface of sulfide minerals and within the tailings. The main secondary minerals identified are goethite and X-ray amorphous Fe oxyhydroxides and their occurrence decreases with increasing tailings depth. Secondary Fe phases are found as mineral coatings or individual grains and retain relatively high amounts of metal(loid)s (up to 57.6 wt% Cu, 1.60 wt% Hg, 23.8 wt% As, and 2.37 wt% Sb). Based on batch leaching tests and lysimeter results, the mobility of potentially toxic elements in the tailings is low. The limited mobility of metals and metalloids is due to their retention by Fe oxyhydroxides and low solubilities of metal(loid)-bearing sulfides. The observations are consistent with PHREEQC calculations, which predict the precipitation of Fe oxyhydroxides as the main solubility-controlling mineral phases for As, Cu, Hg, and Sb. Waters discharging from tailings impoundment are characterized by a neutral to slightly alkaline pH (7.52–7.96) and low concentrations of dissolved metal(loid)s (<5–7.0 μg/L Cu, <0.1–0.3 μg/L Hg, 5.0–16 μg/L As, and 5.0–43 μg/L Sb). Primary factors influencing aqueous chemistry at the site are mutual processes of sulfide oxidation and carbonate dissolution as well as precipitation reactions and sorption onto hydrous ferric oxides abundantly present at the discharge of the impoundment waters. The results of the study show that, presently, there are no threats of acid mine drainage formation at the site and significant contamination of natural aquatic ecosystem in the close vicinity of the tailings impoundment.     

Ion chemistry of waters impounded by the Ziqlab dam, Jordan, and weathering processes – a case study

The area included in the present investigation is that surrounding Ziqlab dam in the northern Jordan Valley. The water chemistry of the impounded lake shows that it is dominated by Mg, Ca, Na and HCO₃. These waters reflects the dominance of carbonate weathering with some contribution of silicates. Mg + Ca + Na and HCO₃ + Cl account for about 90% of the total cations and anions. X-ray analysis shows that, kaolinte and illite are the dominant clay minerals in sediments behind Ziqlab dam. Anthropogenic activities within the Ziqlab catchments area contribute to increasing of the ionic concentrations. These include various development activities in the catchments area, waste disposal (especially the untreated municipal and domestic sewage) into the Ziqlab River, and agricultural activities. Ziqlab dam water chemistry is within the range of stability field of kaolinite.     

The toxicity and physiological effect of goniothalamin, a styryl-pyrone, on the generalist herbivore, Spodoptera exigua Hübner

Efficacy of Goniothalamin a styryl-pyrone isolated from Goniothalamus wightii Hook.f. and Thoms, against beet armyworm, Spodoptera exigua (Hübner), populations was determined under laboratory condition. The experiments were carried out with concentrations of 5, 10, 15 and 30 ppm in an artificial diet and compared with control insects. Laboratory bioassay showed that the goniothalamin had a strong effect on food utilization, moulting and gut histology. The food consumption and conversion of ingested and digested food to body matter decreased with increasing pyrone concentration. The antifeedant activity was also observed in larvae of S. exigua. The treated third instar larvae exhibited mortality in a dose dependent manner. At 5, 10, 15 and 30 ppm/insect, the pyrone gave 23%, 45% 63% and 100% mortality respectively. The larvae of S. exigua gained significantly less weight until pupation in the 10 and 15 ppm pyrone concentrations. Duration of larval period was also affected after treatment with pyrone. The metamorphosis was delayed with additional moulting (7th instar) after treatment with 10 and 15 ppm of goniothalamin, the percentage of larvae successfully moulted into progressive instars was significantly decreased with an increase in pyrone concentrations. The effects of goniothalamin on midgut ultrastructure of third instar larvae of S. exigua were investigated by using light microscopy. Cross sections of the midgut showed that the epithelial cells were destroyed. Significant damage of the midgut epithelium was observed along with lysis.     

Persistence and transport of bacteria and viruses in groundwater — a conceptual evaluation

The results of an interdisciplinary research program on the subsurface persistence and transport of pathogenic bacteria and viruses are evaluated on the basis of an expanded advection-dispersion model which considers the persistence of these microorganisms under the conditions found within an aquifer, the retardation by adsorption-desorption processes and the role of filtration processes. The model indicates that the principal controls are filtration processes, the microorganisms being fixed on the filter media are ultimately eliminated or inactivated by biological, chemical and physical processes.     

Economics of carbon dioxide capture and utilization—a supply and demand perspective

Lately, the technical research on carbon dioxide capture and utilization (CCU) has achieved important breakthroughs. While single CO₂-based innovations are entering the markets, the possible economic effects of a large-scale CO₂ utilization still remain unclear to policy makers and the public. Hence, this paper reviews the literature on CCU and provides insights on the motivations and potential of making use of recovered CO₂ emissions as a commodity in the industrial production of materials and fuels. By analyzing data on current global CO₂ supply from industrial sources, best practice benchmark capture costs and the demand potential of CO₂ utilization and storage scenarios with comparative statics, conclusions can be drawn on the role of different CO₂ sources. For near-term scenarios the demand for the commodity CO₂ can be covered from industrial processes, that emit CO₂ at a high purity and low benchmark capture cost of approximately 33 €/t. In the long-term, with synthetic fuel production and large-scale CO₂ utilization, CO₂ is likely to be available from a variety of processes at benchmark costs of approx. 65 €/t. Even if fossil-fired power generation is phased out, the CO₂ emissions of current industrial processes would suffice for ambitious CCU demand scenarios. At current economic conditions, the business case for CO₂ utilization is technology specific and depends on whether efficiency gains or substitution of volatile priced raw materials can be achieved. Overall, it is argued that CCU should be advanced complementary to mitigation technologies and can unfold its potential in creating local circular economy solutions.     

Benefits to rare plants and highway safety from annual population reductions of a “native invader,” white-tailed deer, in a Chicago-area woodland

Overabundant white-tailed deer are one of the most serious threats to woodland plant communities in the Chicago area. Moreover, the abundant deer in a highly populated area causes economic harm and poses hazards to human safety through collisions with vehicles. The artificial conditions causing the overabundance and resulting consequences qualify the white-tailed deer in the Chicago area to be considered as “native invaders”. We examined the benefits of culling deer at a Chicago-area woodland preserve by comparing browse rates on four endangered plant species from years before culling began with years with culling. We also examined deer–vehicle collision and traffic flow rates on area roads from years before culling began and years with culling to assess whether population reductions may have benefited road safety in the area. All four endangered plant species (three orchid species and sweet fern) had lower browse rates in years with culls, although the decreased browsing rates were statistically distinguishable for only two of the species (grass pink orchid and sweet fern). After first verifying that traffic flow rates did not decrease from pre-cull years to years with culls, we analyzed the Illinois Department of Transportation data from area roads based on deer–vehicle collisions causing >US$500 in damage and showed a one-third reduction in deer–vehicle collisions. An economic analysis showed a cost savings during the cull years of US$0.6 million for reducing browsing to just these four monitored plant species and the reduction in deer–vehicle collisions.     

Toxicity, dioxin-like activities, and endocrine effects of DDT metabolites—DDA, DDMU, DDMS, and DDCN

Background, aim, and scope  

2,2-bis(chlorophenyl)-1,1,1-trichloroethane (DDT) metabolites, other than those routinely measured [i.e., 2,2-bis(chlorophenyl)-1,1-dichloroethylene (DDE) and 2,2-bis(chlorophenyl)-1,1-dichloroethane (DDD)], have recently been detected in elevated concentrations not only in the surface water of Teltow Canal, Berlin, but also in sediment samples from Elbe tributaries (e.g., Mulde and Havel/Spree). This was paralleled by recent reports that multiple other metabolites could emerge from the degradation of parent DDT by naturally occurring organisms or by interaction with some heavy metals. Nevertheless, only very few data on the biological activities of these metabolites are available to date. The objective of this communication is to evaluate, for the first time, the cytotoxicity, dioxin-like activity, and estrogenicity of the least-studied DDT metabolites.     

Deciphering the impact of novel coronavirus pandemic on agricultural sustainability,food security,and socio-economic sectors—a review

Environmental Science and Pollution Research - The Spanish flu, Asian flu, Hong Kong flu, HIV/AIDS, SARS, Ebola, and Swine flu, among others, have had a significant impact on agriculture,...     

Analysis of a population of magnetotactic bacteria of the Gulf of Gabès,Tunisia

The occurrence of magnetotactic bacteria (MTB) on a Tunisian marine coast exposed to heavy metals pollution (Sfax, Gulf of Gabès, Mediterranean Sea) was investigated. The MTB population of this Southern Mediterranean coast was compared to the MTB populations previously investigated on the French Northern Mediterranean coast. A dominant MTB coccus morphotype was observed by microscopy analysis. By pyrosequencing technology, the analysis of the 16S ribosomal RNA (rDNA) revealed as much as 33 operational taxonomic sequence units (OTUs) close to sequences of MTB accessible in the databases. The majority were close to MTB sequences of the “Med group” of α-Proteobacteria. Among them, a dominant OTU_001 (99 % of the MTB sequences) affiliated within the Magnetococcales order was highlighted. Investigating the capacities of this novel bacterium to be used in bioremediation and/or depollution processes could be envisaged.     

Allergy from perspective of environmental pollution effects: from an aspect of atopic dermatitis,immune system,and atmospheric hazards—a narrative review of current evidences

Environmental Science and Pollution Research - Environmental pollution has become more diversified in recent years as technologies for urbanization is increasingly more advanced. Several...     

Role of biochar on composting of organic wastes and remediation of contaminated soils—a review

Biochar is produced by pyrolysis of biomass residues under limited oxygen conditions. In recent years, biochar as an amendment has received increasing attention on composting and soil remediation, due to its unique properties such as chemical recalcitrance, high porosity and sorption capacity, and large surface area. This paper provides an overview on the impact of biochar on the chemical characteristics (greenhouse gas emissions, nitrogen loss, decomposition and humification of organic matter) and microbial community structure during composting of organic wastes. This review also discusses the use of biochar for remediation of soils contaminated with organic pollutants and heavy metals as well as related mechanisms. Besides its aging, the effects of biochar on the environment fate and efficacy of pesticides deserve special attention. Moreover, the combined application of biochar and compost affects synergistically on soil remediation and plant growth. Future research needs are identified to ensure a wide application of biochar in composting and soil remediation.

Open image in new window

Graphical abstract ?

     

Measurements of ammonia concentrations,fluxes and dry deposition velocities to a spruce forest 1991–1995

The dry deposition velocities and fluxes of ammonia have been estimated from measurements of the vertical gradient of ammonia and micrometeorology above a spruce forest in western Jutland, Denmark. Measurements have been made in seven periods, each lasting about one week and covering all seasons and different meteorological situations. Different deposition characteristics were observed, depending on the ammonia concentration and the relative humidity. At conditions with westerly winds, the wind brings air masses from the North Sea with low concentration levels of ammonia to the site, while at conditions with easterly winds, the air have passed central Jutland with large emission areas. Some of the relatively low deposition velocities or emissions were observed during conditions with low ammonia concentration and westerly winds. These observations might relate to a compensation point of the forest, i.e. an ammonia concentration below which the trees and/or the surface emit ammonia due to an equilibrium with the ammonia inside the needles or on the surface. Emission of ammonia was also observed at relatively high ammonia concentration levels (above 2 μg NH₃–N m^-3), mainly during one measuring period characterized by easterly winds with dry conditions and high ammonia concentrations, and the emissions might relate to evaporation from ammonia saturated surfaces or emission from mineralization in the forest soil. In general, relatively high net deposition velocities were observed during conditions with relative humidity above 80% or at ammonia concentrations moderate higher than a given (temperature dependent) compensation point. During stable conditions some observations revealed that the gradient above the canopy not necessarily represents the exchange with the canopy.