Steel slag quality control for road construction aggregates and its environmental impact: case study of Vietnamese steel industry—leaching of heavy metals from steel-making slag

Environmental Science and Pollution Research - Steel slag is an industrial by product of steel manufacturing processes and has been widely utilized within civil and construction materials for road...     

Influence of a nickel smelter plant on the mineralogical composition of attic dust in the Tikveš Valley, Republic of Macedonia

Mineral phases and their content were determined in attic dust samples collected from 27 houses in the Tikve? Valley, Republic of Macedonia. By using quantitative X-ray diffraction, the principal mineral phases were determined to be the serpentinite group (chrysotile, lizardite) and amphibole group of minerals (ribecite, tremolite, actinolite) present in the attic dust samples from this region which are not common constituents of urban dust. Strong correlations existed between these mineral phases in the dust and those in ores processed at a ferronickel smelter plant situated in this region. Spatial distributions of specific mineral phases were made and were consistent with wind directions and predicted deposition (60–70 %) of dust emitted from the metallurgical plant.     

Plant–bacteria partnerships for the remediation of hydrocarbon contaminated soils

Plant–bacteria partnerships have been extensively studied and applied to improve crop yield. In addition to their application in agriculture, a promising field to exploit plant–bacteria partnerships is the remediation of soil and water polluted with hydrocarbons. Application of effective plant–bacteria partnerships for the remediation of hydrocarbons depend mainly on the presence and metabolic activities of plant associated rhizo- and endophytic bacteria possessing specific genes required for the degradation of hydrocarbon pollutants. Plants and their associated bacteria interact with each other whereby plant supplies the bacteria with a special carbon source that stimulates the bacteria to degrade organic contaminants in the soil. In return, plant associated-bacteria can support their host plant to overcome contaminated-induced stress responses, and improve plant growth and development. In addition, plants further get benefits from their associated-bacteria possessing hydrocarbon-degradation potential, leading to enhanced hydrocarbon mineralization and lowering of both phytotoxicity and evapotranspiration of volatile hydrocarbons. A better understanding of plant–bacteria partnerships could be exploited to enhance the remediation of hydrocarbon contaminated soils in conjunction with sustainable production of non-food crops for biomass and biofuel production.     

Carbon and polymer-based magnetic nanocomposites for oil-spill remediation—a comprehensive review

Environmental Science and Pollution Research - Oil spills are a major contributor to water contamination, which sets off a significant impact on the environment, biodiversity, and economy....     

A typical case study from smelter–contaminated soil: new insights into the environmental availability of heavy metals using an integrated mineralogy characterization

Environmental Science and Pollution Research - Mineralogy was an important driver for the environmental release of heavy metals. Therefore, the present work was conducted by coupling mineral...     

Photocatalysis: an effective tool for photodegradation of dyes—a review

Environmental Science and Pollution Research - The disposal of dye-contaminated wastewater is a major concern around the world for which a variety of techniques are used for its treatment. The...     

Role of biochar on composting of organic wastes and remediation of contaminated soils—a review

Biochar is produced by pyrolysis of biomass residues under limited oxygen conditions. In recent years, biochar as an amendment has received increasing attention on composting and soil remediation, due to its unique properties such as chemical recalcitrance, high porosity and sorption capacity, and large surface area. This paper provides an overview on the impact of biochar on the chemical characteristics (greenhouse gas emissions, nitrogen loss, decomposition and humification of organic matter) and microbial community structure during composting of organic wastes. This review also discusses the use of biochar for remediation of soils contaminated with organic pollutants and heavy metals as well as related mechanisms. Besides its aging, the effects of biochar on the environment fate and efficacy of pesticides deserve special attention. Moreover, the combined application of biochar and compost affects synergistically on soil remediation and plant growth. Future research needs are identified to ensure a wide application of biochar in composting and soil remediation.

Open image in new window

Graphical abstract ?

     

Capacity of transportation and spread of COVID-19—an ironical fact for developed countries

Environmental Science and Pollution Research - The widespread epidemic of the COVID-19 in developed countries such as Europe and the USA has sparked many speculations. What factors caused the rapid...     

Process envelopes for stabilisation/solidification of contaminated soil using lime–slag blend

Purpose  

Stabilisation/solidification (S/S) has emerged as an efficient and cost-effective technology for the treatment of contaminated soils. However, the performance of S/S-treated soils is governed by several intercorrelated variables, which complicates the optimisation of the treatment process design. Therefore, it is desirable to develop process envelopes, which define the range of operating variables that result in acceptable performance.     

Removal of the emerging contaminant bisphenol A by an ureasil–PEO hybrid membrane: experimental study and molecular dynamic simulation

This work reports the use of a cross-linked ureasil–PEO hybrid matrix (designated PEO800) as an efficient adsorbent to retain the emerging contaminant bisphenol A (BPA) from an aqueous medium. The in-deep experimental and theoretical results provide information about the interactions between PEO800 and BPA. The in situ UV-vis spectroscopy data and the pseudo-first order, pseudo-second order, Elovich, and Morris–Webber intraparticle diffusion models allowed us to propose a three-step mechanism for the adsorption of BPA onto PEO800. The results indicate that the pseudo-first-order kinetic model effectively describes the adsorption of BPA onto PEO800. Differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR) spectroscopy confirmed the interaction of PEO800 with BPA, showing an alteration in the chemical environment of the polymer ether oxygen atoms present in the hybrid matrix. The molecular dynamic simulation provides further evidence that the BPA molecules interact preferentially with PEO. The amount of desorbed BPA depended on the pH and solvent used in the assays. This work provides new opportunities for using the hydrophilic ureasil–PEO matrix which has demonstrated its abilities in being a fast and easy alternative to successfully removing organic contaminants from aqueous mediums and therefore having potential applications in water remediation.

Graphical abstract

     

An experimental simulation of los angeles reactive pollutant program (LARPP) operation 33—part I. experimental simulation in an outdoor smog chamber

The reactions occurring along LARPP operation 33 were simulated in the UNC outdoor smog chamber. Variable rates of dilution and computer-controlled precursor injections were determined from analysis of the mixed region along the operation's trajectory. Also, the production of ozone equivalent to LARPP by static systems (initial injection only) and the effect of the products of the previous day's reactions were investigated.The difference between simulation and LARPP O₃ concentrations for one run was within the limits of measurement error at the end of the experiment, although simulation O₃ production lagged behind that of LARPP earlier. The other simulation produced 6pphm less O₃ than LARPP. The inability to simulate the effects of day-old materials and the use of acetaldehyde to represent all aldehydes were judged to reduce O₃ production in the chamber relative to the atmosphere. In static experiments, one-half to two-thirds of the LARPP morning nonmethane hydrocarbons were found to have roughly equal O₃ production potential to LARPP. Both simulation and static runs support the hypothesis that, under similar meteorological condition, the ozone produced is more closely related to the total precursor input divided by the total volume of air into which it is mixed than to initial concentrations.     

Pharmacokinetics and metabolic disposition of nickel in poisoned rats — Effect of chelating drugs

The kinetics of mobilization of hepatic and renal nickel by lipophilic drugs namely cyclam and TETA and hydrophilic drugs namely EDTA, CDTA, DTPA and HEDTA was studied at 16, 24, and 72 hrs in rats treated with nickel (II) chloride. Both the types of drugs although having comparable stability constants for nickel exhibit a marked difference in their efficacy and behaviour. The former type of drugs reduced the renal nickel while increasedits hepatic content. The latter ones reduced both renal and hepatic contents. A mathematical correlation established in the form of linear regression equations between % mobilization of nickel, stability constants and time duration revealed a positive and significant correlation between all the three parameters. These equations also revealed the highest order of efficacy of drugs at the shortest time investigated.     

Particleboard panels made with sugarcane bagasse waste—an exploratory study

The reuse of natural fibers, in order to manufacture a new product, is already becoming popular due to the generation of a series of advantages in social areas. Sugarcane bagasse is a set of tangled fibers of cellulose, produced in large quantities due to increased acreage and industrialization of sugarcane resulting from public and private investments in production aimed for the alcohol industry. The aim of this study was to evaluate the feasibility of producing sheet timber manufacture from the sugarcane bagasse, analyzing mechanical strength properties. A form of metal sheet for the molding of 12 specimens based on sugarcane bagasse and industrialized resin was made. Soon after molding, specimens were submitted to a three-point bending test, with the aid of a press. The analysis of the results allowed to conclude that the tensile strength and the modulus of elasticity did not obtain the minimum values recommended by the standard. The tensile strength must be improved to allow panels to be useful for ordinary strength applications.

     

Potential of Eucalyptus globulus for the phytoremediation of metals in a Moroccan iron mine soil—a case study

Environmental Science and Pollution Research - The contamination left by abandoned mines demands sustainable mitigation measures. Hence, the aim of this study was to examine the phytoremediator...     

Alginate beads containing water treatment residuals for arsenic removal from water—formation and adsorption studies

Water treatment residuals (WTRs) produced in large quantities during deironing and demanganization of infiltration water, due to high content of iron and manganese oxides, exhibit excellent sorptive properties toward arsenate and arsenite. Nonetheless, since they consist of microparticles, their practical use as an adsorbent is limited by difficulties with separation from treated solutions. The aim of this study was entrapment of chemically pretreated WTR into calcium alginate polymer and examination of sorptive properties of the obtained composite sorbent toward As(III) and As(V). Different products were formed varying in WTR content as well as in density of alginate matrix. In order to determine the key parameters of the adsorption process, both equilibrium and kinetic studies were conducted. The best properties were exhibited by a sorbent containing 5 % residuals, formed in alginate solution with a concentration of 1 %. In slightly acidic conditions (pH 4.5), its maximum sorption capacity was 3.4 and 2.9 mg g^?1 for As(III) and As(V), respectively. At neutral pH, the adsorption effectiveness decreased to 3.3 mg As g^?1 for arsenites and to 0.7 mg As g^?1 for arsenates. The presence of carboxylic groups in polymer chains impeded in neutral conditions the diffusion of anions into sorbent beads; therefore, the main rate-limiting step of the adsorption, mainly in the case of arsenates, was intraparticle diffusion. The optimal condition for simultaneous removal of arsenates and arsenites from water by means of the obtained composite sorbent is slightly acidic pH, ensuring similar adsorption effectiveness for both arsenic species.     

Statistics of extreme values of air quality—a simulation study

Some of the existing National Ambient Air Quality Standards require the use of an extreme observed concentration in a year to determine compliance. Since observed extreme values tend to be not reliable, different statistical approaches for determining the extreme values have been used or suggested. However, none of these approaches properly take into account the effects of an underlying trend and the serial correlation of the air quality time series. By means of a time series simulation, these effects can be considered concurrently in estimating the extreme values.This paper reports the results of such a simulation for determining the statistics of the seven highest values (rank m = 1–7, m = 1 representing the highest value) using actual air quality data that contain both trends and autocorrelations. The result of this simulation shows that for a high-pollution season of 122 days, the commonly used asymptotic distributions overestimate the maximum (m = 1) values and underestimate their uncertainties. As one moves from m = 1 to m = 7, the over- and underestimations by the asymptotic distributions worsen (compared to the simulation result). These findings in logarithmic space are further enhanced when they are converted back to concentration space. The simulation using the oxidant data for Azusa, California further shows that the uncertainties associated with the estimates Of the extreme values are typically 20% of the values for m = 1 and 10% of the values for m = 7. Compared to the observed data, which is a single series for each year, the result based on the popular lognormal distribution consistently overpredicts the extreme values, by about 40% for the maximum values and about 20% for the seventh highest values.Our results illustrate the difficulty of estimating the extreme values of air quality time series with accuracy and confidence. However, the accuracy and confidence of the estimates improve as the rank moves away from the extreme. This result calls for the need for using a less extreme value in setting a sensible air quality standard. Of course, such a standard can be set without sacrificing its stringency.     

Prediction of focal image for solar parabolic dish concentrator with square facets—an analytical model

Environmental Science and Pollution Research - Solar parabolic dish concentrator is one of the high-temperature applications of more than 400 °C for thermal and electrical power...     

Calculation of σz and H for an Observed Vertical Profile of Concentration

ABSTRACT

In the present work, nitrous oxide emissions were estimated [mg/L] by the use of lysimeters under the closed chamber technique for a six month period. The lysimeters were classified by the type of irrigation used: one for drinking water, and the other for treated wastewater. Each lysimeter had two different types of soil (sand and clay), based on the types of soil in Chihuahua City, Mexico. An additional classification based on the depth was done (reticular and vadose zone). Each zone collected gas by the use of a closed chamber technique, allowing the samples to be taken for subsequent quantification and analysis by gas chromatography. A statistical analysis of variance (ANOVA) and principal components analysis (PCA) were conducted to identify the most influential variables or parameters in the formation of nitrous oxide. The variables that were considered for analysis were total Kjeldahl nitrogen (TKN), ammoniacal nitrogen (NH3-N), nitrate nitrogen (NO3-N), and nitrite nitrogen (NO2-N), along with meteorological parameters. In total, 58944 mg/L of N2O were emitted during the measurement period. The results showed that concentration emissions of N2O where the type of soil is sandy were smaller than those of clay soil, while the mean concentration in the vadose zone was higher than those in the reticular zone, regardless the type of soil. The parameters that showed greater influence in the N2O emissions were NO2-N and NO3-N concentrations. Temperature also played an important role in the emissions (the highest emissions were emitted during the cold months). Furthermore, denitrification appeared to be the dominant process in the production of nitrous oxide in soils.

Implications: Nitrous oxide (N₂O) emissions produced in lysimeters with two types of soil (sand and clay) at two different depths (vadose and reticular zones) using treated waste water showed that the higher emissions of N₂O are derived from clay soils in vadose zone; it could be due to the formation of clogging that favors the formation of anoxic conditions for the denitrification process. The parameters that showed more influence in the N₂O emissions were nitrite (NO₂-N) and nitrate (NO₃-N) concentrations along with the temperature.     

Determination of a necessary height for a stack close to a building—a wind tunnel study

Wind tunnel tests were conducted to show that the 2.5 times rule for the determination of a necessary height for a stack close to a building is adequate for a building whose width perpendicular to the wind direction is twice its height, but that it is unnecessarily conservative for a tall thin building. An alternative rule, called Briggs' alternative, is shown to be adequate. The study was undertaken in a meteorological wind tunnel by placing model stacks and buildings in a simulated neutral atmospheric boundary layer. Smoke was used for flow visualization and methane for quantitative concentration measurements downwind of the building. The plumes were neutrally buoyant and the stacks were placed within one building height of the building in all cases.