Effect of turning frequency on co-composting pig manure and fungus residue

Composting of agricultural wastes not only can reduce environmental pollution caused by improper disposal, but also can recycle agricultural wastes and transform them into highly valuable products, such as fertilizers or soil conditioners, for agricultural applications. However, the composting process and final product are easily affected by the limited oxygen supply that results from insufficient aeration, especially in the center of a large-scale windrow. Hence, a pilot-scale experiment was conducted to investigate the effects of the turning frequency on the composting efficiency and compost quality of used pig manure and fungus residue. Physical and chemical characteristics were measured over the course of 63 days of composting. The data indicate that higher temperatures and more rapid moisture removal generally result from a turning treatment of once every 2–4 days than in fewer, or no, turning treatments. The total nitrogen, total phosphorus, and total potassium contents increased in all windrows as the organic matter content decreased, but both the increases and decrease were greater in windrows that were turned more frequently. The reduction of the organic matter mass by 53.7–66.0% for a turning of once every 2–8 days is significantly higher than that for the static windrow (39.1%). Although there is an increase in nitrogen mass loss with an increased turning frequency, lower nitrogen mass losses (12.7–25.7%) in all treatments were noted compared with previous studies. A final compost product with less moisture, less weight, higher nutrient content (N, P, and K), and greater stability was obtained in windrows with turning frequencies of once every 2–4 days, which is recommended when composting pig manure and fungus residue.

Implications: Composting of agricultural wastes not only can reduce environmental pollution caused by improper disposal, but recycling of agricultural wastes transforms them into highly valuable products, such as fertilizers or soil conditioners, for agricultural applications. However, the composting process and final product are easily affected by the limited oxygen supply that results from insufficient aeration, especially in the center of a large-scale windrow. Hence, a pilot-scale experiment was conducted to investigate the effects of the turning frequency on the composting efficiency and compost quality of used pig manure and fungus residue, so as to capture an operational technique suitable for the effective co-composting pig manure and edible fungi residue for a large-scale composting plant.     

Composting duck excreta enriched wood shavings: C and N transformations and bacterial pathogen reductions

Composting of agricultural and domestic wastes is used increasingly to reduce weight, volume, and odor; destroy animal and plant pathogens; and improve the quality of end-products to be used as soil amendments and growth substrates. The objective of this study was to investigate the transformation of C and N and the survival of bacterial populations and pathogenic bacteria during in-vessel composting of duck excreta enriched wood shavings. Two feedstocks, collected on different dates, were composted (C1 and C2) in an enclosed hall system equipped with an electromechanical turner. Temperature was continuously recorded, whereas moisture content and bacterial counts were determined twice a week. Data showed that, although the N content of C2 was only half of that of C1, both materials were fully biostabilized at the end of the composting period as indicated by extractable lipid ratios. In the compost with the low C/N ratio (C1), all bacterial populations were eliminated, whereas fecal streptococci, total coliforms, and gram-negative bacteria were still present in C2 at the end of the composting period. Our results emphasize that the composting of manures and other organic wastes needs to be properly managed to stabilize C and N and to eliminate or reduce bacterial populations.     

生活垃圾仓式静态好氧发酵供风系统工艺设计

生活垃圾堆肥厂的核心——发酵系统对堆肥产品的质量和成本起着决定性的作用,所以其设计显得至关重要。结合多年的科研及工程实践经验,就垃圾仓式静态好氧发酵供风系统工艺设计中供风形式、方式选择,风量、风压计算以及供风控制形式选择等几个关键部分做了详细介绍。     

投加方式和通风速率对脱水污泥堆肥效果的影响

为了在降低能耗的前提下获得更高的污泥堆肥效率和提高堆肥产品质量,利用梨形筒式好氧堆肥反应器,设置2种物料投加方式和3种通风速率,研究堆肥过程中温度、含水率、总氮以及发芽指数（GI）的变化特性。结果表明,与间歇式堆肥相比,连续式堆肥可以显著提高堆体温度和堆体腐熟度,降低堆体含水率及缩短腐熟期,但氮素损失也显著增大（P-1的连续式堆肥,堆体维持高温时间最长,且最终温度稳定在较高温度47～48 ℃,堆末含水率最低,氮素损失处于三者的中间水平,腐熟期最短。综合分析,在通风速率为1.95 L·min-1的连续运行方式下,梨形筒式反应器用于污泥稳定高效堆肥是可行的。     

Development of functional composts using spent coffee grounds,poultry manure and biochar through microbial bioaugmentation

Spent coffee grounds (SCG), poultry manure, and agricultural waste-derived biochar were used to manufacture functional composts through microbial bioaugmentation. The highest yield of tomato stalk-based biochar (40.7%) was obtained at 450°C with a surface area of 2.35 m² g^?1. Four pilot-scale composting reactors were established to perform composting for 45 days. The ratios of NH₄⁺–N/NO₃^?–N, which served as an indicator of compost maturity, indicate rapid, and successful composting via microbial bioaugmentation and biochar amendment. Moreover, germination indices for radish also increased by 14–34% through augmentation and biochar amendment. Microbial diversity was also enhanced in the augmented and biochar-amended composts by 7.1–8.9%, where two species of Sphingobacteriaceae were dominant (29–43%). The scavenging activities of 2,2-diphenyl-1-picrylhydrazyl (DPPH) were enhanced by 14.1% and 8.6% in the fruits of pepper plants grown in the presence of the TR-2 (augmentation applied only) and TR-3 (both augmentation and biochar amendment applied) composts, respectively. Total phenolic content was also enhanced by 68% in the fruits of the crops grown in TR-3. Moreover, the other compost, TR-L (augmentation applied only), boosted DPPH scavenging activity by 111% in leeks compared with commercial organic fertilizer, while TR-3 increased the phenolic content by 44.8%. Composting facilitated by microbial augmentation and biochar amendment shortened the composting time and enhanced the quality of the functional compost. These results indicate that functional compost has great potential to compete with commercially available organic fertilizers and that the novel composting technology could significantly contribute to the eco-friendly recycling of organic wastes such as spent coffee grounds, poultry manure, and agricultural wastes.     

Influence of aeration rate and reactor shape on the composting of poultry manure and sawdust

To achieve successful composting, all the biological, chemical, and physical characteristics need to be considered. The investigation of our study was based on various physicochemical properties, i.e., temperature, ammonia concentration, carbon dioxide concentration, pH, electrical conductivity (EC), carbon/nitrogen (C/N) ratio, organic matter (OM) content, moisture content, bacterial population, and seed germination index (GI), during the composting of poultry manure and sawdust for different aeration rates and reactor shapes. Three cylindrical-shaped and three rectangular-shaped pilot-scale 60-L composting reactors were used in this study, with aeration rates of 0.3 (low), 0.6 (medium), and 0.9 (high) L min^?1 kg^?1 DM (dry matter). All parameters were monitored over 21 days of composting. Results showed that the low aeration rate (0.3 L min^?1 kg^?1 DM) corresponded to a higher and longer thermophilic phase than did the high aeration rate (0.9 L min^?1 kg^?1 DM). Ammonia and carbon dioxide volatilization were directly related to the temperature profile of the substrate, with significant differences between the low and high aeration rates during weeks 2 and 3 of composting but no significant difference observed during week 1. At the end of our study, the final values of pH, EC, moisture content, C/N ratio, and organic matter in all compost reactors were lower than those at the start. The growth rates of mesophilic and thermophilic bacteria were directly correlated with mesophilic and thermophilic conditions of the compost. The final GI of the cylindrical reactor with an airflow rate of 0.3 L min^?1 kg^?1 DM was 82.3%, whereas the GIs of the other compost reactors were below 80%. In this study, compost of a cylindrical reactor with a low aeration rate (0.3 L min^?1 kg^?1 DM) was more stable and mature than the other reactors.

Implications: The poultry industry is growing in South Korea, but there are problems associated with the management of poultry manure, and composting is one solution that could be valuable for crops and forage if managed properly. For high-quality composting, the aeration rate in different reactor shapes must be considered. The objective of this study was to investigate various physicochemical properties with different aeration rates and rector shapes. Results showed that aeration rate of 0.3 L min^?1 kg^?1 DM in a cylindrical reactor provides better condition for maturation of compost.     

Ammonia emissions from the composting of different organic wastes. Dependency on process temperature

Ammonia emissions were quantified for the laboratory-scale composting of three typical organic wastes with medium nitrogen content: organic fraction of municipal solid wastes, raw sludge and anaerobically digested sludge; and the composting of two wastes with high nitrogen content: animal by-products from slaughterhouses and partially hydrolysed hair from the leather industry. All the wastes were mixed with the proper amount of bulking agent. Ammonia emitted in the composting of the five wastes investigated revealed a strong dependence on temperature, with a distinct pattern found in ammonia emissions for each waste in the thermophilic first stage of composting (exponential increase of ammonia emitted when increasing temperature) than that of the mesophilic final stage (linear increase of ammonia emissions when increasing temperature). As composting needs high temperatures to ensure the sanitisation of compost and ammonia emissions are one of the main environmental impacts associated to composting and responsible for obtaining compost with a low agronomical quality, it is proposed that sanitisation is conducted after the first stage in large-scale composting facilities by a proper temperature control. CAPSULE: Ammonia emission pattern and correlation with process temperature are presented for the composting process of different organic wastes.     

Removal of DEHP in composting and aeration of sewage sludge

The potential of composting and aeration to remove bis(2-ethylhexyl) phthalate (DEHP) from municipal sewage sludge was studied with two dewatered sludges: raw sludge and anaerobically digested sludge. Composting removed 58% of the DEHP content of the raw sludge and 34% of that of the anaerobically digested sludge during 85 days stabilisation in compost bins. A similar removal for the anaerobically digested sludge was achieved in a rotary drum in 28 days. Less than 1% of DEHP was removed with the compost leachate. Although DEHP removal was greater from raw sludge compost than anaerobically digested sludge compost, the total and volatile solids removals were on the same level in the two composts. In the aeration of raw sludge at 20 degrees C the DEHP removals were 33-41% and 50-62% in 7 and 28 days, respectively. Both composting and aeration are concluded to have the potential to reduce the DEHP contents typically found in sewage sludges to levels acceptable for agricultural use.     

添加炭基材料对蔬菜废物好氧堆肥进程和腐熟度的影响

以蔬菜废弃物辣椒秸秆和树叶为堆肥原料(CK),采用密闭式好氧堆肥工艺,研究了添加5%木本泥炭(T1)、5%活性炭(T2)和10%木本泥炭(T3)等炭基材料对堆肥pH、EC、CO2累积量、物料损失率、T值、C/N和发芽率指数的影响。结果显示,T2处理的pH在60 d后维持在8~9之间;EC值随着堆肥进行呈现先下降后升高再下降的趋势,最终CK、T1、T2和T3处理的EC值(mS/cm)分别降低了1.02、0.76、0.33和0.48;T2和T3处理的CO2累积量一直高于其他处理;所有处理的物料损失率均在20%以上;4个处理堆肥产品的T值分别为0.56、0.65、0.68和0.69;堆肥产品的发芽率指数分别为63.2%、69.3%、93.5%和86.1%。T值和发芽率指数显示T2和T3处理达到了腐熟阶段。结果表明,在蔬菜堆肥处理中添加炭基材料可改善堆肥产品的理化性质,加速堆肥物料的分解,有效地缩短堆肥周期和提高堆肥产品的腐熟度。     

Composting of spent pig litter in turned and forced-aerated piles

A study was carried out to compare the compositing efficiency of spent litter (a mixture of partially decomposed pig manure and sawdust) in turned and forced-aerated piles. Duplicate piles were built with manual turning (every 4 days) during composting, and duplicate piles were set up with forced aeration using an air pump. The present study demonstrated that the efficiency of composting in the turned and forced-aerated piles was similar. Spent litter in these piles reached maturity at the same time (60 days). The forced-aerated piles went through similar physical, chemical, and microbial changes with the turned piles during composting. The forced-aerated composting system was also as effective as the turned system in eliminating Salmonella sp. in the spent litter. These results suggest that a forced-aerated composting system could be used as an alternative method in composting spent litter. The similarities in temporal changes in temperature, chemical, and microbiological properties of the forced-aerated piles, compared with the turned piles, indicate that addition of a bulking agent under forced aerated composting of spent litter is not necessary. The partially decomposed sawdust in the spent litter provided enough free air space, allowing the delivery of oxygen for the microorganisms in the spent litter piles.     

Bioaerosol generation at large-scale green waste composting plants

Bioaerosol release from composting plants is a cause of concern because of the potential health impacts on site workers and local residents. A one-year monitoring was undertaken in a typical composting plant treating green wastes by windrowing in the open. Aspergillus fumigatus spores and mesophilic bacteria were used as monitoring parameters and were collected in a six-stage Andersen sampler impactor from the air at different locations and during different operational activities. Background concentrations of both microorganisms were generally below 1000 colony-forming units m(-3) when no vigorous activity was taking place. Shredding of fresh green wastes, pile turning, and screening of mature compost were identified as the activities generating the highest amounts of both bioaerosols 40 m downwind of the composting pad. These air concentrations were approximately 2 log units higher than background levels. Screening of mature compost generated lower amounts of A. fumigatus than the other two activities (an average of 1 log unit higher than background levels). Workers were identified as the main potential receptors of high bioaerosol concentrations in areas close to the composting pad, whereas no major risk for local residents was expected because the concentrations recorded at distances of 200 and 300 m downwind of the operational area were not significantly different from background levels.     

Effects of operating parameters on in situ NH3 emission control during kitchen waste composting and correlation analysis of the related microbial communities

Ammonia emission during composting results in anthropogenic odor nuisance and reduces the agronomic value of the compost due to the loss of nitrogen. Adjusting the operating parameters during composting is an emerging in situ odor control technique that is cheap and highly efficient. The effects of in situ NH₃ emission control were investigated in this study by simultaneously adjusting key operating parameters (such as C/N ratio, aeration rate, and moisture content) during the composting processes (C1–C9). Results showed that the average NH₃ emission concentrations for different treatments were in the order of C1 > C4 > C2 > C5 > C3 > C6 > C7 > C8 > C9. The total content of NH₃ emission (21.02 g/kg) in C9 (C/N ratio = 35, aeration rate = 15 L/min, and moisture content = 60%) was much lower than that (65.95 g/kg) in C1 (C/N ratio = 15, aeration rate = 5 L/min, and moisture content = 60%). The nitrogen loss ratio was 27.36% for C1, while 16.15% for C9. The microbial diversity and abundance in C9 and C1 were compared using high-throughput sequencing. The relationship between NH₃ emission, operating parameters, and the related functional microbial communities was also investigated. Results revealed that Nitrosospira, Nitrosomonas, Nitrobacter, Pseudomonas, Methanosaeta, Rhodobacter, Paracoccus, and Sphingobacterium were negatively related to NH₃ emission. According to the above results, the optimal values for different operating parameters for the in situ NH₃ control during kitchen waste composting were, respectively, moisture content of 70%, C/N ratio of 35, and aeration rate of 15 L/min, with the order of effectiveness from high to low being aeration rate > C/N > moisture. This information could be used as a valuable reference for the in situ NH₃ emission control during kitchen waste composting.

     

Co-composting of distillery wastes with animal manures: carbon and nitrogen transformations in the evaluation of compost stability

The aim of this work was to study the viability of recycling the solid wastes generated by the winery and distillery industry by means of co-composting with animal manures, as well as to evaluate the quality of the composts obtained. Two piles, using exhausted grape marc and cattle manure or poultry manure, respectively (at ratios, on a fresh weight basis, of 70:30), were composted by the Rutgers static pile composting system. Throughout the composting process, a number of parameters were monitored, such as pH, electrical conductivity, organic matter, water-soluble carbon, water-soluble polyphenols, different forms of nitrogen (organic nitrogen, ammonium and nitrate) and humification indices (humification ratio, humification index, percentage of humic acid-like C, polymerisation ratio and cation exchange capacity), as well as the germination index. Organic matter losses followed first-order kinetics equation in both piles, the highest organic matter mineralisation rate being observed with exhausted grape marc and cow manure. On the other hand, the mixture with the lowest C/N ratio, using exhausted grape marc and poultry manure, showed the highest initial ammonium contents, probably due to the higher and more labile N content of poultry manure. The increase in the cation exchange capacity revealed the organic matter humification during composting. In contrast, other humification parameters, such as the humification ratio and the humification index, did not show the expected evolution and, thus, could not be used to assess compost maturity. Composting produced a degradation of the phytotoxic compounds, such as polyphenols, to give composts without a phytotoxic character. Therefore, composting can be considered as an efficient treatment to recycle this type of wastes, due to composts presented a stable and humified organic matter and without phytotoxic effects, which makes them suitable for their agronomic use.     

Mitigation of odor causing emissions—Bench-scale investigation

Emissions of malodors are considered to be the greatest threat to the compost industry. In work presented here, several simple odor mitigation alternatives were investigated for their effectiveness in preventing the release of common odorants, such as terpenes, ammonia, and reduced sulfur compounds. The mitigation methods studied included the use of a blanket of finished compost, compost amendment mixed within the feedstock, odor neutralizing agents (ONAs), and oxygen release compounds (ORCs). Among the mitigation alternatives investigated in this study, the use of finished compost as a blanket and finished compost as an amendment yielded the most conclusive and significant results. Both of these alternatives yielded a substantial emission reduction for terpenes, ammonia, and reduced sulfur compounds. The application of finished compost blanket resulted in up to 95% reduction of terpene and 25% reduction of ammonia emissions. Blending the feedstock with finished compost also provided substantial reduction of terpene emissions ranging from 73.6 to 93.1% at the 24% blending ratio, and up to 85% ammonia reduction a the 35% blending ratio. Use of finished compost also provided 75% lower reduced sulfur compound emissions at the 12% blending ratio. Misting and application of odor neutralizing agents did not result in any consistent reduction in emissions for any of the odorous compounds tested.

Implications The odor emissions from composting are often considered to be the biggest threat to composting facilities. Because most facilities cannot afford enclosures and contained composting vessels, there is a need to inexpensively and effectively control the odor emissions from composting facilities. The findings of this research can lead the way for efforts to control odor easily and cost effectively. In fact, the application of a compost blanket for odor control is already gaining acceptance by the composting industry.     

初始粒径和外源添加剂对绿化废弃物堆肥腐熟效果的影响

为探究纤维素酶结合微生物菌剂作为外源添加剂对绿化废弃物堆肥腐熟效果的影响,以及外源添加剂在不同堆肥初始粒径下的使用效果,设置2种初始粒径(2 mm和5 mm)和4种添加剂配比(纤维素酶制剂∶微生物菌剂=0∶0、0∶4、2∶2、2∶4)进行了为期22 d的高温堆肥实验。通过测定不同初始粒径和添加剂配方的腐熟样品的理化指标和细菌群落,研究了初始粒径和外源添加剂对堆肥性质和菌群结构的影响;并运用主成分分析法综合评价了各处理的腐熟程度。结果表明：2 mm处理组的碳氮比(C/N)降幅更大,腐殖化程度优于5 mm,纤维素酶与菌剂结合添加可降低堆肥C/N,提高发芽指数(GI)并促进腐殖质(HS)、胡敏酸(HA)生成;2 mm处理组和菌剂与纤维素酶混配的处理组对功能性菌群的生长繁殖有促进作用。主成分分析结果表明,2 mm粒径添加配比为2∶2的外源添加剂的处理腐熟程度最高,对绿化废弃物堆肥腐熟和质量提升有明显促进效果。     

Co-composting of paper mill sludge and hardwood sawdust under two types of in-vessel processes

Recycling of organic residues by composting is becoming an acceptable practice in our society. Co-composting dewatered paper mill sludge (PMS) and hardwood sawdust, two readily available materials in Canada, was investigated using uncontrolled and controlled in-vessel processes. The composted materials were characterized for total C and N, water-soluble, acid-hydrolyzable, and non-hydrolyzable N, extractable lipids, and by Fourier Transform Infrared (FT-IR) spectrophotometry. In the controlled scale process, the loss of organic matter was approximately 65% higher than in the uncontrolled process. After undergoing initial fluctuations in N fractions during the first two days of composting, by the end of the process, concentrations of water-soluble N decreased while those of acid-hydrolyzable and nonhydrolyzable N increased in the controlled process, whereas in the uncontrolled process, water-soluble N increased, but N in the other two fractions decreased continuously, indicating that the biochemical transformations of organic matter were not completed. Data on extractable lipids and FT-IR spectra suggest that the compost produced from the controlled process was bio-stable after 14 days, while the uncontrolled process was not stabilized after 18 days. In addition, FT-IR data suggest the biological activity during composting centered mainly on the degradation of aliphatic structures while aromatic structures were preserved. The co-composting of the PMS and hardwood sawdust can be successfully achieved if aeration, moisture, and bio available C/N ratios are optimized to reduce losses of N.     

辅料及翻抛工艺对干旱地区污泥堆肥C、N动态变化的影响

针对我国西北干旱地区污泥堆肥过程中存在养分损失较大和腐熟度差的问题。采用正交实验的方法开展大型条垛堆肥,研究辅料参数及翻抛工艺对堆肥过程中C和N养分动态变化的影响,并利用Topsis分析筛选最优处理,达到当地污泥堆肥过程中减少养分损失和提高腐熟度的目的。结果表明,当玉米秸秆配比为15%时,全氮损失量最小,为3.67%。硝态氮的质量分数在堆肥阶段呈持续上升的趋势,铵态氮的质量分数在堆肥过程中先增加后减小,在堆肥结束时,堆体硝态氮和铵态氮的质量分数均随着秸秆配比的增加而减小,质量分数分别为0.99 g·kg⁻¹和0.78 g·kg⁻¹。堆体有机质的质量分数随着秸秆配比增加而增加,15%秸秆的有机质的质量分数比10%和5%秸秆的分别增加了10.08%和6.61%;堆肥过程中堆体C/N比整体呈现W型变化趋势,结束时堆体C/N比随秸秆配比增加而减小。种子发芽指数 (GI) 随着秸秆配比增大而增加,当玉米秸秆配比为15%时,种子发芽指数均超过100%。Topsis分析表明,最优条垛式堆肥处理为T7 (15%秸秆配比+5 cm秸秆粒径+常规翻抛) ,是一种适合西北干旱地区的条垛式污泥堆肥方法。本研究结果可为该地区的生活污泥条垛式堆肥提供参考。     

复合腐秆菌剂对稻草腐熟过程的影响

为了研究复合腐秆菌剂对稻草好氧堆肥的影响,采用好氧堆肥技术,设计了不接菌（对照）和接种复合菌剂2个处理,探讨堆肥过程中堆体温度、pH、有机质、C/N、发芽指数的变化。结果表明,接种复合腐秆菌剂堆体初期温度上升迅速,最高温度达到60℃,高温发酵阶段维持了12 d;与对照相比,接种复合腐秆菌剂对pH值、容重与孔隙度、有机质、C/N变化影响不大;但增加堆体全氮的含量,提高堆肥产品的质量,种子发芽率在第20天迅速上升,最大值为93%。显然接种复合腐秆菌剂促进好氧堆肥迅速起温,提高了堆肥的腐熟质量。     

Bioaerosol Generation at Large-Scale Green Waste Composting Plants

Abstract

Bioaerosol release from composting plants is a cause of concern because of the potential health impacts on site workers and local residents. A one-year monitoring was undertaken in a typical composting plant treating green wastes by windrowing in the open. Aspergillus fumigatus spores and mesophilic bacteria were used as monitoring parameters and were collected in a six-stage Andersen sampler impactor from the air at different locations and during different operational activities. Background concentrations of both microorganisms were generally below 1000 colony-forming units m^?3 when no vigorous activity was taking place. Shredding of fresh green wastes, pile turning, and screening of mature compost were identified as the activities generating the highest amounts of both bioaerosols 40 m downwind of the composting pad. These air concentrations were ～2 log units higher than background levels. Screening of mature compost generated lower amounts of A. fumigatus than the other two activities (an average of 1 log unit higher than background levels). Workers were identified as the main potential receptors of high bioaerosol concentrations in areas close to the composting pad, whereas no major risk for local residents was expected because the concentrations recorded at distances of 200 and 300 m downwind of the operational area were not significantly different from background levels.     

Evaluating Environmental Parameters for Minimum Ammonium Losses during Composting of Trimming Residues

Abstract

A neural fuzzy system was used to investigate the influence of environmental variables (time, aeration, moisture, and particle size) on composting parameters (pH, organic matter [OM], nitrogen [N], ammonium nitrogen [NH₄ ⁺-N] and nitrate nitrogen [NO₃ ^--N]). This was to determine the best composting conditions to ensure the maximum quality on the composts obtained with the minimum ammonium losses. A central composite experimental design was used to obtain the neural fuzzy model for each dependent variable. These models, consisting of the four independent process variables, were found to accurately describe the composting process (the differences between the experimental values and those estimated by using the equations never exceeded 5–10% of the former). Results of the modeling showed that creating a product with acceptable chemical properties (pH, NH₄ ⁺-N and NO₃ ^--N) entails operating at medium moisture content (55%) and medium to high particle size (3–5 cm). Moderate to low aeration (0.2 L air/min · kg) would be the best compromise to compost this residue because of the scant statistical influence of this independent variable.