Peat soils as a source of lead contamination to upland fluvial systems

Upland peat soils are generally regarded as effective sinks of atmospherically deposited lead. However, the physical process of erosion has the potential to transform peat soils from sinks to sources of lead contamination. Lead input and fluvial lead outputs (dissolved+particulate) were estimated for a contaminated and severely eroding peatland catchment in the southern Pennines, UK. Lead input to the catchment is 30.0+/-6.0gha(-1)a(-1) and the output from the catchment is 317+/-22.4gha(-1)a(-1). Suspended particulate matter accounts for 85% of lead export. Contaminated peat soils of the catchment are a significant source of lead to the fluvial system. This study has demonstrated strong coupling between the physical process of erosion and the mobilization of lead into the fluvial system. The process of peat erosion should therefore be considered when estimating lead outputs from peatland catchments, especially in the context of climate change.     

Spatial distribution and vertical variation of arsenic in Guangdong soil profiles, China

Total of 260 soil profiles were reported to investigate the arsenic spatial distribution and vertical variation in Guangdong province. The arsenic concentration followed an approximately lognormal distribution. The arsenic geometric mean concentration of 10.4 mg/kg is higher than that of China. An upper baseline concentration of 23.4 mg/kg was estimated for surface soils. The influence of soil properties on arsenic concentration was not important. Arsenic spatial distributions presented similar patterns that high arsenic concentration mainly located in limestone, and sandshale areas, indicating that soil arsenic distribution was dependent on bedrock properties than anthropogenic inputs. Moreover, from A- to C-horizon arsenic geometric mean concentrations had an increasing tendency of 10.4, 10.7 to 11.3 mg/kg. This vertical variation may be related to the lower soil organic matter and soil degradation and erosion. Consequently, the soil arsenic export into surface and groundwaters would reach 1040 t year-1 in the study area.     

Assessment of management-dependent nutrient losses in tropical industrial tree plantations

Industrial tree plantations in the tropics usually follow short rotations and intensive site management including slash and burn, and the use of heavy machinery. We attempt to quantify the implied nutrient losses (harvest export, erosion, slash and burn, leaching) in order to give plantation managers a chance to understand the significance of their planning and decisions. We used the scarce globally available information and a case study plantation in East Kalimantan, Indonesia (Acacia mangium and Eucalyptus deglupta). Adaptation involves problems and is discussed in some detail. Results are approximate only. Assuming a harvest volume of 200 m3 ha(-1), we assessed a loss of 427-680 kg ha(-1) N, 12-13 kg ha(-1) P, 178-252 kg ha(-1) Ca, 276-370 kg ha(-1) K, and 45-57 kg ha(-1) Mg per rotation. Of this overall loss, stand harvest accounted for 18-29% (N), 21-30% (P), 56-26% (K), 48-64% (Ca) and 22-37% (Mg). This means that the cumulative loss by erosion, slash and burn, and leaching exceeds that of the harvest. These losses can be influenced by management.     

Effect of biosolid incorporation on arsenic distribution in Mollisol soils in central Chile

The effect of biosolid incorporation on arsenic distribution in Mollisol soils in central Chile was studied. Two soils were sequentially extracted for arsenic with a five-step method that accounts for the following arsenic forms: non-specifically adsorbed (F1), specifically adsorbed (F2), amorphous and poorly crystallized Fe and Al oxides (F3), well-crystallized Fe and Al oxides (F4) and residual (F5). The arsenic residual fraction was predominant in Pintué soil, whereas in Graneros soil, arsenic was mostly associated to amorphous Fe and Al oxides. Graneros soil exhibited a higher As(V) adsorbing capacity than Pintué soil, which relates to the higher clay and iron and aluminum oxides contents, confirming that these components participation is essential for the adsorption of this metalloid. Biosolid application at a rate of 100Mg ha(-1) caused an increase in arsenic bound to amorphous Fe and Al oxides and in the residual fraction, in Pintué soil. When Pintué soil was spiked with arsenic, aged for two months, and treated with biosolid (100Mg ha(-1)), the content of arsenic in the most labile fractions decreased, thus showing a favorable effect in its application to soils with few specific sites for arsenic adsorption. Arsenic speciation was carried out in the first two fractions of the sequential extraction procedure. As(V) was the main form in both fractions. Biosolid incorporation at a rate of 100Mg ha(-1) caused a significant increase in organic arsenic forms.     

Seasonal changes of CO(2), CH(4) and N(2)O fluxes in relation to land-use change in tropical peatlands located in coastal area of South Kalimantan

Tropical peatland could be a source of greenhouse gases emission because it contains large amounts of soil carbon and nitrogen. However these emissions are strongly influenced by soil moisture conditions. Tropical climate is characterized typically by wet and dry seasons. Seasonal changes in the emission of carbon dioxide (CO(2)), methane (CH(4)) and nitrous oxide (N(2)O) were investigated over a year at three sites (secondary forest, paddy field and upland field) in the tropical peatland in South Kalimantan, Indonesia. The amount of these gases emitted from the fields varied widely according to the seasonal pattern of precipitation, especially methane emission rates were positively correlated with precipitation. Converting from secondary forest peatland to paddy field tended to increase annual emissions of CO(2) and CH(4) to the atmosphere (from 1.2 to 1.5 kg CO(2)-C m(-2)y(-1) and from 1.2 to 1.9 g CH(4)-C m(-2)y(-1)), while changing land-use from secondary forest to upland tended to decrease these gases emissions (from 1.2 to 1.0 kg CO(2)-C m(-2)y(-1) and from 1.2 to 0.6 g CH(4)-C m(-2)y(-1)), but no clear trend was observed for N(2)O which kept negative value as annual rates at three sites.     

Effect of arsenic-contaminated irrigation water on agricultural land soil and plants in West Bengal, India

Total arsenic withdrawn by the four shallow tubewells, used for agricultural irrigation in the arsenic-affected areas of Murshidabad district per year is 6.79 kg (mean: 1.79 kg, range: 0.56-3.53 kg) and the mean arsenic deposition on land per year is 5.02 kg ha(-1) (range: 2-9.81 kg ha(-1)). Mean soil arsenic concentrations in surface, root of plants, below ground level (0-30 cm) and all the soils, collected from four agricultural lands are 14.2 mg/kg (range: 9.5-19.4 mg/kg, n = 99), 13.7 mg/kg (range: 7.56-20.7 mg/kg, n = 99), 14.8 mg/kg (range: 8.69-21 mg/kg, n = 102) and 14.2 mg/kg (range: 7.56-21 mg/kg, n = 300) respectively. Higher the arsenic in groundwater, higher the arsenic in agricultural land soil and plants has been observed. Mean arsenic concentrations in root, stem, leaf and all parts of plants are 996 ng/g (range: <0.04-4850 ng/g, n = 99), 297 ng/g (range: <0.04-2900 ng/g, n = 99), 246 ng/g (range: <0.04-1600 ng/g, n = 99) and 513 ng/g (range: <0.04-4850 ng/g, n = 297) respectively. Approximately 3.1-13.1, 0.54-4.08 and 0.36-3.45% of arsenic is taken up by the root, stem and leaf respectively, from the soil.     

Hydrogeochemical behavior of arsenic-enriched groundwater in the deltaic environment: comparison between two study sites in West Bengal, India

Groundwaters have been collected from deltaic areas of West Bengal (Chakdaha and Baruipur blocks) to record their hydrogeochemical characteristics, and to verify the mechanism of arsenic (As) release. The data reveals that shallow (<70 m) groundwaters in both areas are of Ca-Mg-HCO(3) type; however deeper (>70 m) groundwaters in Baruipur areas are slightly enriched with Na, Cl and SO(4), indicating possible saline water intrusion. The groundwater is anoxic (mean Eh: -124 and -131 mV) with high levels of As (mean: 116 and 293 mug/L), Fe (mean: 4.74 and 3.83 mg/L), PO(4) (mean: 3.73 and 3.21 mg/L) and Mn (mean: 0.37 and 0.49 mg/L), respectively for Chakdaha and Baruipur areas. The observed values of As and bicarbonate (mean: 409 and 499 mg/L) in the shallow aquifer are indicative of redox processes (e.g., oxidation of organic matter) favouring the release of As. Moreover, the presence of DOC in the shallow aquifer suggests that organic matter is young and reactive, and may actively engage in redox driven processes. Our study further confirms that both Fe- and Mn-reduction processes are the dominant mechanisms for As release in these groundwaters.     

Modelling temporal variations in the global tropospheric arsenic burden

The response of the troposphere to anthropogenic mobilization of arsenic has been examined by inclusion of the troposphere in a seven reservoir global cycling model for arsenic. Mobilization was simulated from a steady-state condition by increasing the land efflux of arsenic with time according to present day observed arsenic concentrations in the troposphere. Simulations involved separation of low and high temperature pollutant processes, and restrictions in the magnitude of the low temperature source. The sensitivity of the model was also tested by subdividing the troposphere into marine and continental airmasses. The tropospheric burden of arsenic showed increases by factors from 2 to 10 over time scales varying from 8000 to 16,000 years. The elevation of the tropospheric burden was enhanced using the two airmass model, and these elevated levels were more persistent than for a single well-mixed troposphere.     

Behaviour of arsenic in forested catchments following a high-pollution period

Due to high availability of adsorption sites, forested catchments could be net sinks for pollutant arsenic both during the period of increasing and decreasing pollution. We tested this hypothesis along a north-south pollution gradient in spruce die-back affected areas of Central Europe. For two water years (2007-2008), we monitored As fluxes via spruce-canopy throughfall, open-area precipitation, and runoff in four headwater catchments (Czech Republic). Since 1980, atmospheric As inputs decreased 26 times in the north, and 13 times in the south. Arsenic export by runoff was similar to atmospheric inputs at three sites, resulting in a near-zero As mass balance. One site exhibited a net export of As (2.2 g ha⁻¹ yr⁻¹). In contrast, the preceding period (1995-2006) showed much higher As fluxes, and higher As export. Czech catchments do not serve as net sinks of atmospheric As. A considerable proportion of old industrial arsenic is flushed out of the soil.     

Arsenic and other heavy metals in soils from an arsenic-affected area of West Bengal,India

Domkal is one of the 19, out of 26 blocks in Murshidabad district where groundwater contains arsenic above 0.05 mg/l. Many millions of cubic meters of groundwater along with arsenic and other heavy metals are coming out from both the hand tubewells, used by the villagers for their daily needs and shallow big diameter tubewells, installed for agricultural irrigation and depositing on soil throughout the year. So there is a possibility of soil contamination which can moreover affect the food chain, cultivated in this area. A somewhat detailed study was carried out, in both micro- and macrolevel, to get an idea about the magnitude of soil contamination in this area. The mean concentrations (mg/kg) of As (5.31), Fe (6740), Cu (18.3), Pb (10.4), Ni (18.8), Mn (342), Zn (44.3), Se (0.53), Mg (534), V (44.6), Cr (33.1), Cd (0.37), Sb (0.29) and Hg (0.54) in fallow land soils are within the normal range. The mean As (10.7), Fe (7860) and Mg (733) concentrations (mg/kg) are only in higher side whereas Hg (0.17 mg/kg) is in lower side in agricultural land soils, compared to the fallow land soils. Arsenic concentrations (11.5 and 28.0 mg/kg respectively) are high in those agricultural land soils where irrigated groundwater contains high arsenic (0.082 and 0.17 mg/l respectively). The total arsenic withdrawn and mean arsenic deposition per land by the 19 shallow tubewells per year are 43.9 kg (mean: 2.31 kg, range: 0.53-5.88 kg) and 8.04 kg ha(-1) (range: 1.66-16.8 kg ha(-1)) respectively. For the macrolevel study, soil arsenic concentration decreases with increase of distance from the source and higher the water arsenic concentration, higher the soil arsenic at any distance. A proper watershed management is urgently required to save the contamination.     

The potential for kelp manufacture to lead to arsenic pollution of remote Scottish islands

Burning seaweed to produce kelp, valued for its high potash and soda content, was formerly a significant industry in remote coastal areas of Scotland and elsewhere. Given the high concentrations of arsenic in seaweeds, up to 100 mg kg(-1), this study investigates the possibility that the kelp industry caused arsenic contamination of these pristine environments. A series of laboratory-scale seaweed burning experiments was conducted, and analysis of the products using HPLC ICP-MS shows that at least 40% of the arsenic originally in the seaweed could have been released into the fumes. The hypothesis that the burning process transforms arsenic from low toxicity arsenosugars in the original seaweeds (Fucus vesiculosus and Laminaria digitata) to highly toxic inorganic forms, predominantly arsenate, is consistent with As speciation analysis results. A field study conducted on Westray, Orkney, once a major centre for kelp production, shows that elevated arsenic levels (10.7+/-3.0 mg kg(-1), compared to background levels of 1.7+/-0.2 mg kg(-1)) persist in soils in the immediate vicinity of the kelp burning pits. A model combining results from the burning experiments with data from historical records demonstrates the potential for arsenic deposition of 47 g ha(-1) year(-1) on land adjacent to the main kelp burning location on Westray, and for arsenic concentrations exceeding current UK soil guideline values during the 50 year period of peak kelp production.     

Wash effect of atmospheric trace metals wet deposition and its source characteristic in subtropical watershed in China

In order to better understand air pollution in deve-loping regions, such as China, it is important to investigate the wet deposition behavior of atmospheric trace metals and its sources in the subtropical watershed. This paper studies the seasonal change of trace metal concentrations in precipitation and other potential sources in a typical subtropical watershed (Jiazhuhe watershed) located in the downstream of the Yangtze River of China. The results show that typical crustal elements (Al, Fe) and trace element (Zn) have high seasonal variation patterns and these elements have higher contents in precipitation as compared to other metals in Jiazhuhe watershed. In addition, there is no observed Pb in base flow in this study, and the concentration magnitudes of Al, Ba, Fe, Mn, Sr, and Zn in base flow are significantly higher than that of other metals. During different rainfall events, the dynamic export processes are also different for trace metals. The various trace metals dynamic export processes lead to an inconsistent mass first flush and a significant accumulative variance throughout the rainfall events. It is found that in this region, most of the trace metals in precipitation are from anthropogenic emission and marine aerosols brought by typhoon and monsoon.

     

The interactions between plant growth,vegetation structure and soil processes in semi-natural acidic and calcareous grasslands receiving long-term inputs of simulated pollutant nitrogen deposition

Regular applications of ammonium nitrate (35-140 kg N ha(-1) year(-1)) and ammonium sulphate (140 kg N ha(-1) year(-1)) to areas of acidic and calcareous grassland in the Derbyshire Peak District over a period of 6 years, have resulted in significant losses in both overall plant cover, and the abundance of individual species, associated with clear and dose-related increases in shoot nitrogen content. No overall growth response to nitrogen treatment was seen at any stage in the experiment. Phosphorus additions to the calcareous plots did however lead to significant increases in plant cover and total biomass, indicative of phosphorus limitation in this system. Clear and dose-related increases in soil nitrogen mineralization rates were also obtained, consistent with marked effects of the nitrogen additions on soil processes. High nitrification rates were seen on the calcareous plots, and this process was associated with significant acidification of the 140 kg N ha(-1) year(-1) treatments.     

Scale-dependent spatial variability in peatland lead pollution in the southern Pennines, UK

Increasingly, within-site and regional comparisons of peatland lead pollution have been undertaken using the inventory approach. The peatlands of the Peak District, southern Pennines, UK, have received significant atmospheric inputs of lead over the last few hundred years. A multi-core study at three peatland sites in the Peak District demonstrates significant within-site spatial variability in industrial lead pollution. Stochastic simulations reveal that 15 peat cores are required to calculate reliable lead inventories at the within-site and within-region scale for this highly polluted area of the southern Pennines. Within-site variability in lead pollution is dominant at the within-region scale. The study demonstrates that significant errors may be associated with peatland lead inventories at sites where only a single peat core has been used to calculate an inventory. Meaningful comparisons of lead inventories at the regional or global scale can only be made if the within-site variability of lead pollution has been quantified reliably.     

Anthropogenic and natural levels of arsenic in PM10 in Central and Northern Chile

A few copper and gold smelters in Chile are behind a large fraction of global arsenic emissions, raising concerns for increased concentrations of arsenic in PM10 in Central and Northern Chile. This concern is amplified by the fact that Northern Chile soils and rivers in general are characterized by a high arsenic content. A monitoring and modeling study has been performed to quantify the regional impact of the smelter emissions. Measured atmospheric arsenic concentrations from 2.4 to 30.7 ng m⁻³ were found at seven rural stations, located tens to hundreds of kilometers away from the nearest smelter. Analyses of topsoil and subsoil samples taken from PM10 monitoring stations revealed levels up to 291 mg kg⁻¹, the highest values found in the northern Atacama desert in Chile. An absolute principal component analysis of selected trace elements in PM10 shows that the regional impact of anthropogenic smelter emissions on airborne arsenic concentrations is more important than the effect of soil dust resuspension. The dominance of the smelter emissions is larger in Central Chile than in the northern parts. The impact of resuspended soil dust on airborne arsenic levels in rural areas was estimated not to exceed 5 ng m⁻³. The model calculations support the dominant role of anthropogenic emissions and give spatial and temporal variations in atmospheric concentrations consistent with the monitored levels at five of the seven stations. At two of the northernmost stations indications were found of unidentified sources other than the smelters and the resuspended soil dust, contributing to about 5 ng m⁻³ of total arsenic levels. The study confirms that a strong control or elimination of arsenic emissions from the smelters would lead to arsenic in PM10 levels in Northern and Central Chile comparable to non-polluted areas in other countries.     

Arsenic-transforming microbes and their role in biomining processes

It is well known that microorganisms can dissolve different minerals and use them as sources of nutrients and energy. The majority of rock minerals are rich in vital elements (e.g., P, Fe, S, Mg and Mo), but some may also contain toxic metals or metalloids, like arsenic. The toxicity of arsenic is disclosed after the dissolution of the mineral, which raises two important questions: (1) why do microorganisms dissolve arsenic-bearing minerals and release this metal into the environment in a toxic (also for themselves) form, and (2) How do these microorganisms cope with this toxic element? In this review, we summarize current knowledge about arsenic-transforming microbes and their role in biomining processes. Special consideration is given to studies that have increased our understanding of how microbial activities are linked to the biogeochemistry of arsenic, by examining (1) where and in which forms arsenic occurs in the mining environment, (2) microbial activity in the context of arsenic mineral dissolution and the mechanisms of arsenic resistance, (3) the minerals used and technologies applied in the biomining of arsenic, and (4) how microbes can be used to clean up post-mining environments.     

Arsenic speciation of atmospheric particulate matter (PM10) in an industrialised urban site in southwestern Spain

An arsenic speciation study has been performed in PM10 samples collected on a fortnight basis in the city of Huelva (SW Spain) during 2001 and 2002. The arsenic species were extracted from the PM10 filters using a NH2OH x HCl solution and sonication, and determined by HPLC-HG-AFS. The mean bulk As concentration of the samples analyzed during 2001 and 2002 slightly exceed the mean annual 6 ng m(-3) target value proposed by the European Commission for 2013, arsenate [As(V)] being responsible for the high level of arsenic. The speciation analyses showed that As(V) was the main arsenic species found, followed by arsenite [As(III)] (mean 6.5 and 7.8 ng m(-3) for As(V), mean 1.2 and 2.1 ng m(-3) for As(III), in 2001 and 2002, respectively). The high levels of arsenic species found in PM10 in Huelva have a predominant industrial origin, such as the one from a nearby copper smelter, and do not present a seasonal pattern. The highest daily levels of arsenic species correspond to synoptic conditions in which the winds with S and SW components transport the contaminants from the main emission source. The frequent African dust outbreaks over Huelva may result in an increment of mass levels of PM10, but do not represent a significant input of arsenic in comparison to the anthropogenic source. The rural background levels of arsenic around Huelva are rather high, in comparison to other rural or urban areas in Spain, showing a relatively high atmosphere residence time of arsenic. This work shows the importance of arsenic speciation in studies of aerosol chemistry, due to the presence of arsenic species [As(III) and As(V)] with distinct toxicity.     

A review of the export of carbon in river water: fluxes and processes

This review summarizes data on exports of carbon from a large number of temperate and boreal catchments in North America, Europe and New Zealand. Organic carbon losses, usually dominated by dissolved organic matter, show relatively little variation, most catchments exporting between 10 and 100 kg C ha(-1) yr(-1). Inorganic carbon exports occur at a similar rate. However, a lack of information on the flux of particulate organic carbon and dissolved CO2 is highlighted, particularly for rivers in Europe. Processes regulating the flux of organic carbon to streams and its subsequent fate in-stream are reviewed, along with the effects of land use and acidification on these processes. The size of the global riverine flux of carbon in relation to the global carbon cycle and the possible effects of environmental change on the export of carbon in rivers are considered.     

Fate of nickel in a lime-stabilized biosolid,a calcareous soil and soil–biosolid mixtures

Soil contamination with anthropogenic metals resulting from biosolid application is widespread around the world. To better predict the environmental fate and mobility of contaminants, it is critical to study the capacity of biosolid-amended soils to retain and release metals. In this paper, nickel adsorption onto a calcareous soil, a lime-stabilized biosolid, and soil–biosolid mixtures (30, 75, and 150 t biosolid/ha) was studied in batch experiments. Sorption experiments showed that (1) Ni adsorption was higher onto the biosolid than the calcareous soil, and (2) biosolid acted as an adsorbent in the biosolid–soil mixtures by increasing Ni retention capacity. The sorption tests were complemented with the estimation of Ni adsorption reversibility by successive applications of extraction solutions with water, calcium (100 mg/L), and oxalic acid (equivalent to 100 mg carbon/L). It has been shown that Ni desorption rates in soil and biosolid-amended soils were lower than 30 % whatever the chemical reagent, indicating that Ni was strongly adsorbed on the different systems. This adsorption/desorption hysteresis effect was particularly significant at the highest biosolid concentration (150 t/ha). Finally, an adsorption empirical model was used to estimate the maximum permissible biosolid application rate using French national guideline. It has been shown that desorption effects should be quantitatively considered to estimate relevant biosolid loadings.     

Arsenic release from iron rich mineral processing waste: Influence of pH and redox potential

This paper presents the effect of pH and redox potential on the potential mobility of arsenic (As) from a contaminated mineral processing waste. The selected waste contained about 0.47 g kg(-1) of As and 66.2 g kg(-1) of iron (Fe). The characteristic of the waste was identified by acid digestion, X-ray diffraction and sequential extraction procedures. Less than 2% of the total As was acid extractable with the remaining 98% associated with Fe-oxyhydroxides and oxides. Batch leaching tests at different pH conditions showed a strong pH dependence on arsenic and iron leaching. Arsenic leaching followed a "V" shaped profiles with significant leaching in the acidic and alkaline pH region. Acid extractable phases dissolved at acidic pH, while desorption of arsenic due to increase in pH resulted in high arsenic concentration at alkaline pH. Under aerobic conditions and pH 7, As solubility was low, probably due to its precipitation on Fe-oxyhydroxides. Maximum As solubilization occurred at pH 11 (3.59 mg l(-1)). Similarity in the As and Fe leaching profiles suggested that the release of As was related to the dissolution of Fe in the low pH region. In general, redox potential did not play a significant role in arsenic or iron solubilization. It was thus concluded that for this solid waste, desorption was the predominant mechanism in arsenic leaching. A simple thermodynamic model based on arsenic and iron redox reactions was developed to identify the more sensitive redox couple.