Geographic patterns of non-carpeted floor dust loading in Syracuse, New York (USA) homes

Residential floor dust loading was measured on the smooth floor surface of 488 houses in Syracuse, New York, during the summers of 2003 and 2004. Using U.S. Environmental Protection Agency (EPA) wipe methods, pre-weighed Ghost Wipes, Lead Wipes, or Whatman Filters were employed to collect duplicate samples from (predominantly) kitchens. The collection efficiency of the various media was determined from multiple wipe tests and side-by-side comparisons. The results were normalized and aggregated at the census tract level to determine whether spatial patterns of dust loading could be observed. Loading was found to be log-normally distributed, with a geometric mean value of 0.311 g m⁻² (29 mg of dust per square foot of floor); 95% of the observations fell in the range of 0.042–2.330 g m⁻² (4–216 mg foot⁻²). The sampling for floor dust loading shows some bias for day of the week in which visits to the residential properties were made. After a first-order correction for this effect, results were aggregated by census tract and mapped in a geographic information system (GIS); strong spatial patterns can be identified in an inverse distance weighted mapping. The geographic patterns exhibit a strong correlation with socio-economic/demographic covariates extracted from the 2000 census summaries. Dust mass on the floors is positively correlated with renter-occupied properties and family size; it is negatively correlated with measures of household income.     

Comparison of IEUBK model predictions and actual blood lead values at a former battery recycling site

This paper presents an evaluation of US EPA's integrated exposureuptake biokinetic model for lead (IEUBK model) using data obtained during emergency removal operations at a former lead-acid battery recycling plant and the surrounding community. Data employed in the study include soil lead and interior dust lead, air lead levels collected at the site perimeter, drinking water lead levels at the community water main and blood lead data collected from an annual blood lead monitoring programme conducted over a four year period during the remediation activities.Geometric mean soil and dust concentrations were found to be a better predictor of blood lead than arithmetic mean data. However, weight based dust lead data were believed to be an inappropriate measure of dust lead levels. Estimates of household dust lead concentrations based upon surface loading data (g m^–2) yielded blood lead predictions which were more consistent with data collected in the blood lead monitoring programme     

Lichens to distinguish urban from industrial PAHs

This paper shows that lichens can be used as biomonitors to distinguish urban from industrial polycyclic aromatic hydrocarbons (PAHs). PAHs are atmospheric pollutants originating mainly from incomplete combustion of fuels in vehicles and industry. The occurrence of PAHs in air is a serious health issue in urban areas and industrial areas because some PAHs are carcinogenic. Biomonitoring PAHs with lichens is generally applied for quantification of PAHs. However, the precise sources of PAHs are not well known. Here we use lichen to trace the source of PAHs. PAHs were analyzed in Pyxine subcinerea Stirton, a lichen species collected from twelve sites which vary from urban and industrial to periurban forest area of Haridwar, in the foothills of the Indian Himalayas. Total PAH concentration ranged between 1.25 and 187.3 μg g⁻¹. Results indicate a clear distinction between urban and industrial PAHs profile, using principal component analysis. Lichen sampled from industrial sites exhibited higher concentrations of two-, five-, and six-ringed PAHs, up to 60% of total PAHs, while samples from urban sites were dominated by four-ringed PAHs, predominantly fluoranthene and acenaphthylene. Molecular ratios indicate that combustion was the dominant source of origin of PAHs in industrial area, while urban sites showed mixed origin of PAHs, both pyro- and petrogenic.     

Influence of wave exposure on South African mussel beds and their associated infaunal communities

This study investigates effects of wave exposure on beds of the mussel Mytilus galloprovincialis and the infaunal communities associated with them. Nine sites of varying wave exposure were sampled near Groenrivier, on the west coast of South Africa. Wave exposure was measured using a Palumbi device, and exposure ranged from 7.17×10³ to 18.49×10³ N m^–2. Percentage mussel cover at each site was measured using 50×50 cm quadrats, and three 10×10 cm samples were removed from the mussel beds in the mid-intertidal zones of each site for examination of infauna. Percentage mussel cover, mean mussel length, mussel biomass and mussel bed depth all peaked at intermediate exposures, declining towards both the most sheltered and most exposed sites. Infaunal species diversity and richness both showed the reverse trend, peaking at the most sheltered and most exposed sites, and declining at intermediate exposures. Neither infaunal abundance, nor biomass, was significantly correlated to wave exposure, although abundance was highest at sheltered sites and biomass greatest at the most exposed site, which was dominated by limpets and large robust polychaetes.Communicated by J.P. Thorpe, Port Erin     

Current and historic distribution and abundance of the inarticulated brachiopod, <Emphasis Type="Italic">Lingula reevii</Emphasis> Davidson (1880), in Kaneohe Bay,Oahu, Hawaii,USA

The inarticulated brachiopod, Lingula reevii Davidson (1880) is a filter-feeding invertebrate that burrows vertically in sandy or mixed sediments. Its only recorded occurrence is from Kaneohe Bay, Oahu, Hawaii, southern Japan, and Ambon, Indonesia. Past surveys of Kaneohe Bay populations suggested a distinct decrease in abundance following the diversion of sewage effluent from the bay in 1978/1979. In the summer of 2004 and 2007, visual surveys were conducted in areas of historical L. reevii abundance as well as in areas appearing to have suitable habitat. In 2004, approximately 2,950 m² at 20 sites within the bay were surveyed using quantitative belt transecting methods. A maximum density of 4 Lingula/m² was observed, a decrease from previous maximum estimates of 500 individuals/m² (Worcester, Dissertation, Zoology Department, University of Hawai′i, pp 49, 1969) and 100 individuals/m² (Emig, J Exp Mar Biol Ecol 52:47–61, 1981). When these 20 sites were revisited in 2007, many had fewer or no L. reevii; therefore, broader scale presence/absence surveys were conducted at 16 additional sites in the bay (also surveyed in 2004). The highest density of L. reevii found in 2007 was 0.94 individuals/m². The continued decline in abundance of L. reevii in Kaneohe Bay may be due, in addition to decreased organic enrichment from diversion of sewage discharge almost 30 years ago, to the more recent reduction of suitable habitat by the invasion of mat-forming alien algae species.     

Thermodynamics of chromium(III) adsorption onto a cation exchanger derived from saw dust of Jack wood

A novel cation exchanger, polymethacrylic acid-grafted saw dust (SD) with spacer group (SP) containing carboxylate functional group at the chain end (SDGPMA-SP-COOH) was prepared from saw dust of Jack wood, and its adsorption equilibrium and thermodynamics of Cr(III) ions were studied at different initial concentrations and temperatures at pH 7.0 using batch technique. Thermodynamic parameters such as change in standard free energy, ΔG ⁰, standard enthalpy, ΔH ⁰ and standard entropy, ΔS ⁰ were determined. The values of isosteric heat of adsorption (ΔH _x ) remain constant at different surface loading of Cr(III) indicating homogeneous surface sites and the absence of lateral interaction between adsorbed ions.     

In situ net primary productivity and photosynthesis of Antarctic sea ice algal, phytoplankton and benthic algal communities

Primary production at Antarctic coastal sites is contributed from sea ice algae, phytoplankton and benthic algae. Oxygen microelectrodes were used to estimate sea ice and benthic primary production at several sites around Casey, a coastal area in eastern Antarctica. Maximum oxygen export from sea ice was 0.95 mmol O₂ m⁻² h⁻¹ (~11.7 mg C m⁻² h⁻¹) while from the sediment it was 6.08 mmol O₂ m⁻² h⁻¹ (~70.8 mg C m⁻² h⁻¹). When the ice was present O₂ export from the benthos was either low or negative. Sea ice algae assimilation rates were up to 3.77 mg C (mg Chl-a)⁻¹ h⁻¹ while those from the benthos were up to 1.53 mg C (mg Chl-a)⁻¹ h⁻¹. The contribution of the major components of primary productivity was assessed using fluorometric techniques. When the ice was present approximately 55–65% of total daily primary production occurred in the sea ice with the remainder unequally partitioned between the sediment and the water column. When the ice was absent, the benthos contributed nearly 90% of the primary production.     

Predicting structural complexity of reefs and fish abundance using acoustic remote sensing (RoxAnn)

This study determined whether the acoustic roughness of Caribbean reef habitats is an accurate proxy for their topographic complexity and a significant predictor of their fish abundance. Fish abundance was measured in 25 sites along the forereef of Glovers Atoll (Belize). At each site, in situ rugosity (ISR) was estimated using the “chain and tape” method, and acoustic roughness (E1) was acquired using RoxAnn. The relationships between E1 and ISR, and between both E1 and ISR and the abundance of 17 common species and the presence of 10 uncommon species were tested. E1 was a significant predictor of the topographic complexity (r ² = 0.66), the abundance of 10 common species of surgeonfishes, pomacentrids, scarids, grunts and serranids and the presence of 4 uncommon species of pomacentrids and snappers. Small differences in E1 (i.e. ∆0.05–0.07) reflected in subtle but significant differences in fish abundance (~1 individual 200 m⁻² and 116 g 200 m⁻²) among sites. Although we required the use of IKONOS data to obtain a large number of echoes per site, future studies will be able to utilise RoxAnn data alone to detect spatial patterns in substrate complexity and fish abundance, provided that a minimum of 50 RoxAnn echoes are collected per site.     

Foraging behaviour of larval cod (<Emphasis Type="Italic">Gadus morhua</Emphasis>) at low light intensities

The ability to forage at low light intensities can be of great importance for the survival of fish larvae in a pelagic environment. Three-dimensional silhouette imaging was used to observe larval cod foraging and swimming behaviour at three light intensities (dusk ~1.36 × 10⁻³ W/m², night ~1.38 × 10⁻⁴ W/m² and darkness ~3.67 × 10⁻⁶ W/m²) at 4 different ages from 6 to 53 days post-hatch (dph). At 6 dph, active pursuit of prey was only observed under dusk conditions. Attacks, and frequent orientations, were observed from 26 dph under night conditions. This was consistent with swimming behaviour which suggested that turn angles were the same under dusk and night conditions, but lower in darkness. Cod at 53 dph attacked prey in darkness and turn angles were not different from those under other light conditions. This suggests that larvae are still able to feed at light intensities of 3.67 × 10⁻⁶ W/m². We conclude that larval cod can maintain foraging behaviour under light intensities that correspond to night-time at depths at which they are observed in the field, at least if they encounter high-density patches of prey such as those that they would encounter at thin layers or fronts.     

Characterization and sources of PAHs in an urban river system in Beijing,China

Water samples from 20 locations on rivers in the Tongzhou District of Beijing were collected four times from July 2005 to March 2006. In addition, sediment samples were collected in July 2005. All samples were analyzed for 16 US Environmental Protection Agency (EPA) priority pollutants polycyclic aromatic hydrocarbons (PAHs). The concentration, distribution, seasonal variation, and sources of the 16 PAH compounds identified in the water samples, suspended particles, and surface sediments were then evaluated. The concentrations of PAHs in the water and suspended particle and surface sediment samples ranged from 87.3 to 1,890 ng l⁻¹, 1,330 to 27,700 ng g⁻¹, and 156 to 8,650 ng g⁻¹, respectively. These results demonstrated that rivers in the Tongzhou District of Beijing had a high level of PAH pollution, especially in the suspended particles. The highest and lowest concentrations of PAHs in the water samples were observed in summer and spring. However, the seasonal variations in the concentration of PAHs in the suspended particles were more complicated. The dominant compounds in the water, suspended particle, and surface sediment samples were two-, three- and four-ring PAH compounds, respectively. Ratio analysis illustrated that fuel-burning was the primary source of PAHs in the study area. Gasoline, diesel, coal, and coke oven sources were identified and the contributions of the different fuel-burning sources were then calculated using factor analysis and multiple linear regression. These analyses revealed that coal combustion, gasoline combustion plus coke oven emission, and diesel combustion accounted for 38.8%, 38.5%, and 22.7% of the PAHs in suspended particles, respectively.     

Evaluation on exposures to particulate matter at a junior secondary school: a comprehensive study on health risks and effective inflammatory responses in Northwestern China

Air pollutant measurement and respiratory inflammatory tests were conducted at a junior secondary school in Xi’an, Northwestern China. Hazardous substances including particulate matters (PMs), black carbon (BC) and particle-bounded polycyclic aromatic hydrocarbons (PAHs) were quantified both indoors and outdoors of the school. Source characterization with organic tracers and particle-size distribution demonstrated that the school’s air was mostly polluted by combustion emissions from the surrounding environment. The evaluation of health assessment related to air quality was conducted by two methods, including potential risk estimation of air pollutants and direct respiratory inflammatory test. The incremental lifetime cancer risks associated with PAHs were estimated and were 1.62 × 10⁻⁶ and 2.34 × 10⁻⁶, respectively, for indoor and outdoor fine PMs. Both the values exceeded the threshold value of 1 × 10⁻⁶, demonstrating that the carcinogenic PAHs are a health threat to the students. Respiratory inflammatory responses of 50 students who studied in the sample classroom were examined with a fractional exhaled nitric oxide (FeNO) test, with the aid of health questionnaires. The average FeNO concentration was 17.4 ± 8.5 ppb, which was slightly lower than the recommended level of 20 ppb established by the American Thoracic Society for children. However, a wide distribution and 6% of the values were > 35 ppb, suggesting that the potentials were still high for eosinophilic inflammation and responsiveness to corticosteroids. A preliminary interpretation of the relationship between air toxins and respiratory inflammatory response demonstrated the high exposure cancer risks and inflammatory responses of the students to PMs in the city.

     

Sources of polycyclic aromatic hydrocarbons (PAHs) in sediments of the Biobio River in south central Chile

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous in the environment; there are concerns about them due to their toxic properties. Human activities could significantly contribute to the total PAH burden in river sediments. In this work, we document the analysis of PAHs in sediments taken in the middle stretch of the Biobio River in south central Chile. This river is a principal system, draining more than 24,000 km² and subjected to a diverse variety of human-made stressors (pulp mill and urban effluents, agricultural drainage systems, etc). During 2003, several sediment samples were taken in more than 45 sampling sites located in the river’s middle stretch. Due to the granulometric characteristics (mainly sandy sediments), only 17 samples were analyzed, taking into consideration the presence of a fine section within the sediment sample. Using HPLC with fluorescence detection, 15 EPA priority PAHs and perylene were analyzed. The composition of PAHs in the sediment samples is rather similar between sites and levels averaged 104 ± 78 ng g⁻¹ d.w. The highest levels were detected downstream from an industrial discharge. A good correlation was observed between PAH levels and organic carbon content in the tested sediments; however, concentrations above 134 ng g⁻¹ d.w. did not indicate correlation. The samples PAH ratios (Flu/Pyr and Chr/B(a)A) reveal a strong pyrolytic PAH pattern in the sediments tested, supporting evidence indicating that PAHs come mainly from pyrolytic sources. This result contrasts with previous records that have shown a natural influence in the upper basin and a petrogenic pattern near the mouth.     

Microbial activity and carbon, nitrogen, and phosphorus content in a subtropical seagrass estuary (Florida Bay): evidence for limited bacterial use of seagrass production

Bacterial abundance, production, and extracellular enzyme activity were determined in the shallow water column, in the epiphytic community of Thalassia testudinum, and at the sediment surface along with total carbon, nitrogen, and phosphorus in Florida Bay, a subtropical seagrass estuary. Data were statistically reduced by principle components analysis (PCA) and multidimensional scaling and related to T. testudinum leaf total phosphorus content and phytoplankton biomass. Each zone (i.e., pelagic, epiphytic, and surface sediment community) was significantly dissimilar to each other (Global R = 0.65). Pelagic aminopeptidase and sum of carbon hydrolytic enzyme (esterase, peptidase, and α- and β-glucosidase) activities ranged from 8 to 284 mg N m⁻² day⁻¹ and 113–1,671 mg C m⁻² day⁻¹, respectively, and were 1–3 orders of magnitude higher than epiphytic and sediment surface activities. Due to the phosphorus-limited nature of Florida Bay, alkaline phosphatase activity was similar between pelagic (51–710 mg P m⁻² day⁻¹) and sediment (77–224 mg P m⁻² day⁻¹) zones but lower in the epiphytes (1.1–5.2 mg P m⁻² day⁻¹). Total (and/or organic) C (111–311 g C m⁻²), N (9.4–27.2 g N m⁻²), and P (212–1,623 mg P m⁻²) content were the highest in the sediment surface and typically the lowest in the seagrass epiphytes, ranging from 0.6 to 8.7 g C m⁻², 0.02–0.99 g N m⁻², and 0.5–43.5 mg P m⁻². Unlike nutrient content and enzyme activities, bacterial production was highest in the epiphytes (8.0–235.1 mg C m⁻² day⁻¹) and sediment surface (11.5–233.2 mg C m⁻² day⁻¹) and low in the water column (1.6–85.6 mg C m⁻² day⁻¹). At an assumed 50% bacterial growth efficiency, for example, extracellular enzyme hydrolysis could supply 1.8 and 69% of epiphytic and sediment bacteria carbon demand, respectively, while pelagic bacteria could fulfill their carbon demand completely by enzyme-hydrolyzable organic matter. Similarly, previously measured T. testudinum extracellular photosynthetic carbon exudation rates could not satisfy epiphytic and sediment surface bacterial carbon demand, suggesting that epiphytic algae and microphytobenthos might provide usable substrates to support high benthic bacterial production rates. PCA revealed that T. testudinum nutrient content was related positively to epiphytic nutrient content and carbon hydrolase activity in the sediment, but unrelated to pelagic variables. Phytoplankton biomass correlated positively with all pelagic components and sediment aminopeptidase activity but negatively with epiphytic alkaline phosphatase activity. In conclusion, seagrass production and nutrient content was unrelated to pelagic bacteria activity, but did influence extracellular enzyme hydrolysis at the sediment surface and in the epiphytes. This study suggests that seagrass-derived organic matter is of secondary importance in Florida Bay and that bacteria rely primarily on algal/cyanobacteria production. Pelagic bacteria seem coupled to phytoplankton, while the benthic community appears supported by epiphytic and/or microphytobenthos production.     

The density and size distribution of Diadema antillarum in Dominica (Lesser Antilles): 2001–2004

Diadema antillarum populations at many Caribbean locations have failed to recover from a wide-spread mortality event during the early 1980s. Quantitative assessments of Diadema in Dominica have only recently begun and can now be put into a regional context. Diadema and benthic algae were monitored in 4-month intervals at six 100 m² sites, spread over a distance of 38 km, along the west coast of Dominica. Diadema density surveys began in July 2001, while algal cover was monitored as of November 2001. Mean densities of individual sites ranged from 0.81 m⁻² (SD=1.02) to 2.98 m⁻² (SD=1.33), and overall means increased from 1.50 m⁻² (SD=0.12) in 2001, to 2.00 m⁻² (SD=0.05) in 2004. The weak negative relationship observed between the Diadema density and macroalgal cover (R ²=0.25, P=0.0030), indicates that Diadema play a limited role in controlling macroalgal species. In contrast, the abundance of turf algae was positively related to low Diadema densities, yet this relationship becomes negative beyond a critical point between 2.0 and 3.0 Diadema per m² (R ²=0.25, P=0.0075). As of November 2001 size measurements of 100 randomly sampled urchins at each site were included in the surveys, resulting in overall mean test size diameters ranging between 5.54 cm (SD=1.55) and 6.00 cm (SD=0.96). The mean test size diameter per site ranged from 4.54 cm (SD=1.91) at Tarou Point in November 2003 to 6.77 cm (SD=0.83) at Salisbury November 2001. Across all sites except Tarou Point, the most commonly occurring Diadema sizes throughout this study were within 1 cm, in the range between 4.5 and 7.5 cm. It is unclear how this Dominica scenario fits into the context of the pathogen-induced mass mortality events of the 1980s because neither qualitative nor quantitative records exist for that time in Dominica. The recent increase in Diadema density may be a symptom of recovery from Hurricane Lenny. Given the indiscriminant local pressure (affecting herbivorous fishes as well as fish predators of Diadema) Diadema’s role as grazer of algal turfs is highlighted. On a regional scale, its stable population of reproductive size classes may serve as source of larvae for nearby downstream islands.     

Stoffströme von Benzol unter besonderer Berücksichtung der Bundesrepublik Deutschland

In the Federal Republic of Germany, benzene is one of the most important basic materials for the chemical industry. Only a relatively small proportion of the pure benzene processed in the chemical industry is emitted into the environment (ca. 40t in 1991). But the substance is also a natural component of the crude oil in gasoline and is released during incomplete combustion or is formed out of other aromatic substances. The primary source of emissions, with more than 10,000 t/yr (approximately 85% of this from motor vehicles with Otto engines), is commercial motor vehicle transportation. Benzene concentrations in the environment are approximately <1 μg/m³ in rural areas, 20–30 μg/m³ near main roads (peak levels in highly urbanized regions with much traffic as high as approximately 100 μg/m³) and 7–15 μg/m³ in the vicinity of industrial polluters. It has not been possible to detect a specific trend over time during the last ten years. An increased exposure (approx. 350–27,000 μg/m³) is likely while filling the tank and within the motor vehicle (approx. 10–200 μg/m³) due to gasoline volatilization from pipes, etc. Compared to outdoor air, higher concentrations of benzene (approx, 2–11 μg/m³) are measured in the indoor air which contains additionally benzene from tobacco smoke, equipment, renovating work and heating. The primary exposure pathway of benzene in humans is inhalation. Apart from individuals with occupational exposure, smokers have the highest internal benzene burden. Measures undertaken during recent years to reduce the amount of emissions have been counteracted at least in part by the increase in motor vehicle traffic. Further measures to reduce the emissions or to change the transporttation policies must still be or have already been initiated.     

Polybrominated diphenyl ethers in plastic products,indoor dust,sediment and fish from informal e-waste recycling sites in Vietnam: a comprehensive assessment of contamination,accumulation pattern,emissions, and human exposure

Residue concentrations of polybrominated diphenyl ethers (PBDEs) in different kinds of samples including consumer products, indoor dust, sediment and fish collected from two e-waste recycling sites, and some industrial, urban and suburban areas in Vietnam were determined to provide a comprehensive assessment of the contamination levels, accumulation pattern, emission potential and human exposure through dust ingestion and fish consumption. There was a large variation of PBDE levels in plastic parts of obsolete electronic equipment (from 1730 to 97,300 ng/g), which is a common result observed in consumer plastic products reported elsewhere. PBDE levels in indoor dust samples collected from e-waste recycling sites ranged from 250 to 8740 ng/g, which were markedly higher than those in industrial areas and household offices. Emission rate of PBDEs from plastic parts of disposed electronic equipment to dust was estimated to be in a range from 3.4 × 10^?7 to 1.2 × 10^?5 (year^?1) for total PBDEs and from 2.9 × 10^?7 to 7.2 × 10^?6 (year^?1) for BDE-209. Some fish species collected from ponds in e-waste recycling villages contained elevated levels of PBDEs, especially BDE-209, which were markedly higher than those in fish previously reported. Overall, levels and patterns of PBDE accumulation in different kinds of samples suggest significant emission from e-waste sites and that these areas are potential sources of PBDE contamination. Intakes of PBDEs via fish consumption were generally higher than those estimated through dust ingestion. Intake of BDE-99 and BDE-209 through dust ingestion contributes a large proportion due to higher concentrations in dust and fish. Body weight normalized daily intake through dust ingestion estimated for the e-waste recycling sites (0.10–3.46 ng/day/kg body wt.) were in a high range as compared to those reported in other countries. Our results highlight the potential releases of PBDEs from informal recycling activities and the high degree of human exposure and suggest the need for continuous investigations on environmental pollution and toxic impacts of e-waste-related hazardous chemicals.     

Quantitative and qualitative observations on Laminaria dentigera and other subtidal kelps of southern Kodiak Island,Alaska

Observations were made and quantitative samples of non-canopy kelps were collected, using SCUBA, at 9 subtidal sites off southern Kodiak Island in May, 1976. At a 10th site, only observations were made. The most abundant species in the quadrats were Laminaria dentigera, L. yezoensis, Pleurophycus gardneri, Agarum cribrosum, and Alaria marginata. We found fertile plants of all these species. L. dentigera dominated at all sampled sites except one within a bed of Nereocystis luetkeana, where P. gardneri was dominant. L. yezoensis was dominant at the site which was visited but not sampled. The average wet weight of non-canopy kelps in the 55 samples was 12 kg m^-2, and the quadrat range was 2 to 35 kg m^-2. The reported ranges of P. gardneri and Alaria marginata are extended westward from Montague Island (147°22W) to Bumble Bay, Kodiak Island (154°43W), where A. marginata was found at a depth of 8.5 m.     

Effects of light exposure on the retention of kleptoplastic photosynthetic activity in the sacoglossan mollusc <Emphasis Type="Italic">Elysia viridis</Emphasis>

The effects of light exposure on the photosynthetic activity of kleptoplasts were studied in the sacoglossan mollusc Elysia viridis. The photosynthetic activity of ingested chloroplasts was assessed in vivo by non-destructively measuring photophysiological parameters using pulse amplitude modulation (PAM) fluorometry. Animals kept under starvation were exposed to two contrasting light conditions, 30 μmol photons m⁻² s⁻¹ (low light, LL), and 140 μmol photons m⁻² s⁻¹ (high light, HL), and changes in photosynthetic activity were monitored by measuring the maximum quantum yield of photosystem II (PSII), F _v/F _m, the minimum fluorescence, F _o, related to chlorophyll a content, and by measuring rapid light-response curves (RLC) of relative electron transport rate (rETR). RLCs were characterised by the initial slope of the curve, α_RLC, related to efficiency of light capture, and the maximum rETR level, rETR_m,RLC, determined by the carbon-fixation metabolism. Starvation induced the decrease of all photophysiological parameters. However, the retention of photosynthetic activity (number of days for F _v/F _m > 0), as well as the rate and the patterns of its decrease over time, varied markedly with light exposure. Under HL conditions, a rapid, exponential decrease was observed for F _v/F _m, α_RLC and rETR_m,RLC, F _o not showing any consistent trend of variation, and retention times ranged between 6 and 15 days. These results suggested that the retention of chloroplast functionality is limited by photoinactivation of PSII reaction center protein D1. In contrast, under LL conditions, a slower decrease in all parameters was found, with retention times varying from 15 to 57 days. F _v/F _m, α_RLC and rETR_m,RLC exhibited a bi-phasic pattern composed by a long phase of slow decrease in values followed by a rapid decline, whilst F _o decayed exponentially. These results were interpreted as resulting from lower rates of D1 photoinactivation under low light and from the gradual decrease in carbon provided by photosynthesis due to reduction of functional photosynthetic units.     

Numerical simulations of the effect of building configurations and wind direction on fine particulate matters dispersion in a street canyon

To explore the effect of traffic emissions on air quality within street canyon, the wind flow and pollutant dispersion distribution in urban street canyons of different H/W, building gap and wind direction are studied and discussed by 3D computational fluid dynamics simulations. The largest PM_2.5 concentrations are 46.4, 37.5, 28.4 µg/m³ when x = ? 88, ? 19.3, ? 19.3 m in 1.5 m above the ground level and the ratio of H/W is 1:1, 1:2 and 2:1, respectively. The flow around the top of the building and clearance flow between the buildings in street canyon influence by different H/W, which affected the diffusion of fine particulate matters. The largest PM_2.5 concentrations are 88.1, 31.6 and 33.7 µg/m³ when x = 148.0, ? 92.3 and ? 186.7 m above the ground level of 1.5 m height and the building gap of 0, 20 and 40%, respectively. The air flows are cut by the clearance in the street canyons, and present the segmental characteristics. The largest PM_2.5 concentrations are 10.6, 11.2 and 16.0 µg/m³ when x = 165.3 m, x = 58.0 and 1.5 m above the ground level of 1.5 m height and wind direction of the parallel to the street, perpendicular to the street and southwest, respectively. Modelled PM_2.5 concentrations are basic agreement with measured PM_2.5 concentrations for southwest wind direction. These results can help analyze the difussion of PM_2.5 concentration in street canyons and urban planning.