Management of biomass residues generated from palm oil mill: Vermicomposting a sustainable option

Solid waste management is one of the challenging problems worldwide and it is becoming more complex by the increase in population and subsequently the waste generated. In Malaysia, among industrial solid waste palm oil mill waste (POMW) contributes the highest share. Wastes from the oil palm mill includes palm oil mill effluent (POME), decanter cake, empty fruit bunches, seed shells and the fibre from mesocarp. Generally most of the waste generated is either disposed of via open dumping or used as fertilizers as such or as animal feed. Land application of POMW and POME is very common practice as it contains numbers of plant nutrients. Direct application of POMW into agricultural soil can result in a number of problems such as water pollution, leaching etc. To deal with these problems, vermicomposting of palm oil mill waste may be a sustainable waste management option.There are number of researches going on management of biomass residues from palm oil mill, but very few works are going on vermicomposting of these agro-industrial waste. Vermicomposting of POMW can be a good practice as it will also be helpful in recycling the useful plant nutrients and it is better than that of composting process. Present review deals with the various aspects of vermicomposting of POMW and its importance. Review also put forward the effect of potential application of vermicompost on plant growth. On the whole it looks for the possibility of vermicomposting of waste from palm oil mill as a sustainable waste management alternative.     

Magnetic composite prepared from palm shell-based carbon and application for recovery of residual oil from POME

Magnetic separation combined with adsorption by activated carbon has been found to be a useful method for removing pollutants. In this paper, the use of palm shell as a source of activated carbon for the removal and recovery of oil from palm oil mill effluent (POME) is studied. In the first part of the study, the properties of samples of activated carbon prepared from palm shell under a variety of different conditions were characterized for their hydrophobicity, surface areas and pore size distribution. The most effective of the activated carbon samples was prepared by impregnation with ZnCl(2) followed by combined physical/chemical activation under carbon dioxide flow at 800 °C. Four grams of these samples adsorbed 90% of the oil from 50 mL POME. In the second part, the palm shell-based carbon samples were given magnetic properties by the technique of iron oxide deposition. Ninety-four percent of the activated carbon/iron oxide composite containing the adsorbed oil could be extracted from the POME by a magnetic bar of 0.15 T. Four grams of the composite can remove 85% of oil from 50 mL POME and a total of 67% of the initial oil can then be recovered by hexane extraction. Powder X-ray diffractometry showed the presence of magnetite and maghemite in the activated carbon/iron oxide composite.     

Environmental benefits from the use of the residual biomass in nurseries

Every year, nurseries waste about 40 t of residual biomass for each ha of potted plants cultivation. The European nursery sector deals with about 90,000 ha of cultivated land and 120,000 ha of nurseries, with a turnover of 19.8 billion Euros in 2011. In recent years, a number of Italian projects highlighted that GHG (greenhouse gas) emissions for the nursery sector range between 37 tCO₂eq/ha/year and 45 tCO₂eq/ha/year for potted plants, mainly due to the consumption of electric energy, plastics and peat. Moreover, other studies analyse the impacts associated to nurseries, recommending best practices for energy reductions and waste recycle or reuse. Therefore, the present work focused its attention to the possible environmental benefits associated to the reuse of residues (wood and substrate) of potted plants that are discarded from the nursery production chain. GHG emissions and fossil energy requirement were quantified by considering the CO₂eq (CO₂ equivalent) and the CER (cumulative energy requirement) respectively, in order to assess the environmental impacts of two different scenarios proposed for the materials recovery. Final results highlighted that the solutions which are able to recover the substrate and the wood allow impact reductions compared to landfill disposal. In particular, the scenario consisting in the immediate separation of the substrate from the root-plant system and the successive chipping of wood for energetic reuse, allows higher savings than those obtainable through shredding and subsequent wind separation. Moreover, for what concerns the CO₂eq, an adequate use of the residual biomass make it possible to compensate the GHG emissions of the nurseries up to 15%.     

Preparation of jet engine range fuel from biomass pyrolysis oil through hydrogenation and its comparison with aviation kerosene

The Bio-oil was produced from the pyrolysis of agricultural wastes (Eucalyptus sawdust) and discarded soybean frying oil. The temperature of the pyrolysis system was initiated at 28°C and increased to 850°C. Atmospheric distillation of crude bio-oil was performed and a fraction at a temperature range 160–240°C (pyrolysis oil) was separated and subjected to GC-MS, ¹H-NMR, TGA and FTIR analysis to identify the different properties and compounds present in pyrolysis oil. It was noticed that there was an abundance of oxygen and nitrogen containing compounds as well as other reactive species in pyrolysis oil. To reduce the amount of these species, the pyrolysis oil was subjected to hydrogenation in the presence of NiMo as a catalyst. After hydrogenation, the atmospheric distillation of hydrogenated bio-oil was performed and another fraction at temperature range 160–240°C (hydrogenated bio-oil) was separated and analyzed by the same techniques. It was noticed that during hydrogenation, more than 60% oxygenated and other reactive species were converted into hydrocarbons. Hydrogenated bio-oil showed very similar physico-chemical properties such as distillation curve, density, viscosity, freezing point, flash point, the presence of hydrocarbons and enthalpy of combustion as aviation kerosene also known as QAV-1.     

Assessment of biomass residue availability and bioenergy yields in Ghana

Biomass is an important renewable energy source that holds large potential as feedstock for the production of different energy carriers in a context of sustainable development, peak oil and climate change. In developing countries, biomass already supplies the bulk of energy services and future use is expected to increase with more efficient applications, such as the production of biogas and liquid biofuels for cooking, transportation and the generation of power. The aim of this study is to establish the amount of Ghana's energy demand that can be satisfied by using the country's crop residues, animal manure, logging residues and municipal waste. The study finds that the technical potential of bioenergy from these sources is 96 PJ in 2700 Mm³ of biogas or 52 PJ in 2300 ML of cellulosic ethanol. The biogas potential is sufficient to replace more than a quarter of Ghana's present woodfuel use. If instead converted to cellulosic ethanol, the estimated potential is seven times the estimated 336 ML of biofuels needed to achieve the projected 10% biofuels blends at the national level in 2020. Utilizing the calculated potentials involves a large challenge in terms of infrastructure requirements, quantified to hundreds of thousands of small-scale plants.     

Leaching mechanisms of Cr(VI) from chromite ore processing residue

Batch leaching tests, qualitative and quantitative x-ray powder diffraction (XRPD) analyses, and geochemical modeling were used to investigate the leaching mechanisms of Cr(VI) from chromite ore processing residue (COPR) samples obtained from an urban area in Hudson County, New Jersey. The pH of the leaching solutions was adjusted to cover a wide range between 1 and 12.5. The concentration levels for total chromium (Cr) and Cr(VI) in the leaching solutions were virtually identical for pH values >5. For pH values <5, the concentration of total Cr exceeded that of Cr(VI) with the difference between the two attributed to Cr(III). Geochemical modeling results indicated that the solubility of Cr(VI) is controlled by Cr(VI)-hydrocalumite and Cr(VI)-ettringite at pH >10.5 and by adsorption at pH <8. However, experimental results suggested that Cr(VI) solubility is controlled partially by Cr(VI)-hydrocalumite at pH >10.5 and by hydrotalcites at pH >8 in addition to adsorption of anionic chromate species onto inherently present metal oxides and hydroxides at pH <8. As pH decreased to <10, most of the Cr(VI) bearing minerals become unstable and their dissolution contributes to the increase in Cr(VI) concentration in the leachate solution. At low pH ( <1.5), Cr(III) solid phases and the oxides responsible for Cr(VI) adsorption dissolve and release Cr(III) and Cr(VI) into solution.     

Economic use value of the Belize marine ecosystem: Potential risks and benefits from offshore oil exploration

The announcement of plans for exploratory oil drilling at a number of offshore sites in Belize raised concerns about the risks associated with drilling, particularly given the socio‐economic importance of the marine ecosystem. The current economic value of fisheries and marine ecotourism is estimated, along with the potential revenue from offshore oil and potential economic losses stemming from oil pollution, under various assumptions on risk and uncertainty. Marine fisheries and ecotourism are estimated to generate around US$ 183 million per year. Single‐year estimated maximum revenue is higher for oil extraction initially but quickly declines; during a 50 year (two generation) period, total discounted benefits from marine fisheries and ecotourism are estimated at US$ 5.1 billion, compared to US$ 3.2 billion from offshore oil revenue. Following a hypothetical oil spill, discounted losses in marine fisheries and ecotourism due to perception and ecological impacts are estimated at US$ 912 million, with clean‐up costs and capital losses of US$ 6.1‐10.4 billion. Considering the short extraction life of oil resources compared to fisheries and ecotourism, the difference in benefits increases substantially in favour of the latter with a longer time horizon. A recent public referendum resulted in a 98% vote against oil exploration and a subsequent annulment of oil concessions pending environmental impact assessments.     

Energy balances,greenhouse gas emissions and economics of biochar production from palm oil empty fruit bunches

This paper presents results from a gate-to-gate analysis of the energy balance, greenhouse gas (GHG) emissions and economic efficiency of biochar production from palm oil empty fruit bunches (EFB). The analysis is based on data obtained from EFB combustion in a slow pyrolysis plant in Selangor, Malaysia. The outputs of the slow pyrolysis plant are biochar, syngas, bio-oil and water vapor. The net energy yield of the biochar produced in the Selangor plant is 11.47 MJ kg⁻¹ EFB. The energy content of the biochar produced is higher than the energy required for producing the biochar, i.e. the energy balance of biochar production is positive. The combustion of EFB using diesel fuel has the largest energy demand of 2.31 MJ kg⁻¹ EFB in the pyrolysis process. Comparatively smaller amounts of energy are required as electricity (0.39 MJ kg⁻¹ EFB) and for transportation of biochar to the warehouse and the field (0.13 MJ kg⁻¹ EFB). The net greenhouse gas emissions of the studied biochar production account for 0.046 kg CO₂-equiv. kg⁻¹ EFB yr⁻¹ without considering fertilizer substitution effects and carbon accumulation from biochar in the soil. The studied biochar production is profitable where biochar can be sold for at least 533 US-$ t⁻¹. Potential measures for improvement are discussed, including higher productivity of biochar production, reduced energy consumption and efficient use of the byproducts from the slow pyrolysis.     

Ethanol production from alkali-pretreated oil palm empty fruit bunch by simultaneous saccharification and fermentation with mucor indicus

Oil palm empty fruit bunch (OPEFB) is a potential raw material for production of lignocellulosic bioethanol. The OPEFB was pretreated with 8% sodium hydroxide (NaOH) solution at 100°C for 10 to 90 min. Enzymatic digestion was carried out using cellulase and β-glucosidase at 45°C for 24 h. It was then inoculated with Mucor indicus spores suspension and fermented under anaerobic conditions at 37°C for 96 h. Sodium hydroxide pretreatment effectively removed 51–57% of lignin in the OPEFB and also its hemicellulose (40–84%). The highest glucan digestibility (0.75 g/g theoretical glucose) was achieved in 40-min NaOH pretreatment. Fermentation by M. indicus resulted in 68.4% of the theoretical ethanol yield, while glycerol (16.2–83.2 mg/g), succinic acid (0–0.4 mg/g), and acetic acid (0–0.9 mg/g) were its by-products. According to these results, 11.75 million tons of dry OPEFB in Indonesia can be converted into 1.5 billion liters of ethanol per year.     

Land resources potential and sustainable land management: an overview

Land degradation continues to be a major threat to local and national food security. With limited potential to develop new land, any increase in agricultural production must be sought largely through the better use of land already under cultivation. Concerns for the global environment associated with agriculture worldwide have also increased in recent years and require more coordinated efforts at global and national levels with decentralisation of activities at the local level.
This article presents an overview of land resources potential for food production, the processes and extent of land degradation and its economic and environmental costs and impacts, and highlights some macro-economic policies and institutional measures for the prevention of land degradation and rehabilitation of degraded lands. A people-centred programme is presented as a basis for decentralising activities for sustainable land use and land management. Finally, the need for better coordinated efforts of concerned UN, multinational agencies and NGOs for the implementation of Agenda 21 and related conventions is stressed.     

Estimated occupational risk from bioaerosols generated during land application of class B biosolids

Some speculate that bioaerosols from land application of biosolids pose occupational risks, but few studies have assessed aerosolization of microorganisms from biosolids or estimated occupational risks of infection. This study investigated levels of microorganisms in air immediately downwind of land application operations and estimated occupational risks from aerosolized microorganisms. In all, more than 300 air samples were collected downwind of biosolids application sites at various locations within the United States. Coliform bacteria, coliphages, and heterotrophic plate count (HPC) bacteria were enumerated from air and biosolids at each site. Concentrations of coliforms relative to Salmonella and concentrations of coliphage relative to enteroviruses in biosolids were used, in conjunction with levels of coliforms and coliphages measured in air during this study, to estimate exposure to Salmonella and enteroviruses in air. The HPC bacteria were ubiquitous in air near land application sites whether or not biosolids were being applied, and concentrations were positively correlated to windspeed. Coliform bacteria were detected only when biosolids were being applied to land or loaded into land applicators. Coliphages were detected in few air samples, and only when biosolids were being loaded into land applicators. In general, environmental parameters had little impact on concentrations of microorganisms in air immediately downwind of land application. The method of land application was most correlated to aerosolization. From this large body of data, the occupational risk of infection from bioaerosols was estimated to be 0.78 to 2.1%/yr. Extraordinary exposure scenarios carried an estimated annual risk of infection of up to 34%, with viruses posing the greatest threat. Risks from aerosolized microorganisms at biosolids land application sites appear to be lower than those at wastewater treatment plants, based on previously reported literature.     

二甲基二烯丙基氯化铵－丙烯酰胺的合成及其在含油污水处理中的应用

以二甲胺、氯丙烯等为原料合成二甲基二烯丙基氯化铵（ＤＭＤＡＡＣ），再与丙烯酰胺（ＡＭ）共聚生成共聚物。利用胶体滴定法测定共聚物的阳离子度、一点法测定特性粘数，并利用充气浮选法对阳离子共聚物进行浮选效果评价。结果表明，当产品的阳离子度在３０％～４０％的范围内除油效果最好，其效果明显优于阳离子聚丙烯酰胺（ＣＰＡＭ），与复配的聚合铝加聚丙烯酰胺（ＰＡＣ＋ＰＡＭ）相当。     

Land application of phosphorus-laden sludge: a feasibility analysis

An investigation was conducted to examine aerobic digestion of the phosphorus-laden sludge produced at the Regina Wastewater Treatment Plant and feasibility of land use of this sludge combined with the dewatered anaerobically digested primary sludge from this plant. Experimental studies showed that aerobic digestion can be employed for the stabilization of the chemical sludge. Results of the feasibility analysis showed that mixing the two digested sludges met the heavy metal criteria set by various guidelines for agricultural use, presented the advantage of an increased concentration of nutrients and a decreased concentration of heavy metals, and a longer useful life of the agricultural site compared to using dewatered anaerobically digested primary sludge alone. Land application of the mixed digested sludges would be a more appropriate method of sludge disposal compared to the present practice of landfilling the dewatered sludge and lagooning the chemical sludge.     

Electrocoagulation of palm oil mill effluent as wastewater treatment and hydrogen production using electrode aluminum

Palm oil mill effluent (POME) is highly polluting wastewater generated from the palm oil milling process. Palm oil mill effluent was used as an electrolyte without any additive or pretreatment to perform electrocoagulation (EC) using electricity (direct current) ranging from 2 to 4 volts in the presence of aluminum electrodes with a reactor volume of 20 L. The production of hydrogen gas, removal of chemical oxygen demand (COD), and turbidity as a result of electrocoagulation of POME were determined. The results show that EC can reduce the COD and turbidity of POME by 57 and 62%, respectively, in addition to the 42% hydrogen production. Hydrogen production was also helpful to remove the lighter suspended solids toward the surface. The production of Al(OH)XHO at the aluminum electrode (anode) was responsible for the flocculation-coagulation process of suspended solids followed by sedimentation under gravity. The production of hydrogen gas from POME during EC was also compared with hydrogen gas production by electrolysis of tap water at pH 4 and tap water without pH adjustment under the same conditions. The main advantage of this study is to produce hydrogen gas while treating POME with EC to reduce COD and turbidity effectively.     

Production of bio-oil from algal biomass and its upgradation to biodiesel using CaO-based heterogeneous catalysts

The present article deals with the production of bio-oil from algal biomass as well as the preparation and characterization of noble CaO-based heterogeneous catalyst for upgradation of bio-oil to biodiesel. The bio-oil has been extracted from algal biomass using hexane as solvent in soxhlet apparatus and upgraded to biodiesel by transesterification using noble CaO-based heterogeneous catalysts. Catalyst with TiO₂:CaO molar ratio of 0.25 and calcination temperature of 700°C has been found to be most suitable among all the catalysts developed. Characterization of the catalysts has been done by using X-ray diffraction (XRD), scanning electron microscope (SEM), and thermo-gravimetric analysis (TGA). The input--output model has been developed to correlate experimental and predicted value of biodiesel yield. Optimization of process parameters has been done using response surface methodology. Various properties and elemental composition of algal bio-oil and biodiesel have been determined and compared with biodiesel.     

Dry reforming of methane over oil palm shell activated carbon and ZSM-5 supported cobalt catalysts

In this study, cobalt supported oil palm shell activated carbon (Co/OPS-AC) and ZSM-5 zeolite (Co/ZSM-5) catalysts have been prepared for dry reforming of methane. Cobalt ratios of 6.0 and 14.0 wt% were deposited via wet impregnation method to the OPS-AC and ZSM-5 catalysts. The catalysts were characterized by XRD, N₂ adsorption--desorption isotherms, BET surface area, SEM, FESEM-EDX, TPR-H₂, and TPD-NH₃. The dry reforming of methane was performed using a micro reactor system under the condition of 10,000 ml/h.g-cat, 3 atm, CH₄/CO₂ ratio of 1.2:1.0 and temperature range from 923 K to 1023 K. The gaseous products were analyzed by gas chromatography (GC) with thermal conductivity detector (TCD) and further quantified to determine the conversions of CH₄ and CO₂, and the yields of CO and H₂. Experimental results revealed both catalysts exhibited lower conversions of CO₂ and CH₄ with the increase in temperature from 923 K to 1023 K. The reduced conversions may be due to the formation of carboneous substance on the catalyst known as coking. Comparatively, Co/OPS-AC gave higher conversions of CO₂ and CH₄ as well as higher yields of H₂ and CO as it has a higher surface area than Co/ZSM-5 which subsequently rendered higher activity for the reforming of methane. With the increasing cobalt loadings and reaction temperature, OPS-AC(14) catalyst exhibited improved activity and H₂/CO ratio. Based on these results, cobalt supported OPS activated carbon catalyst was suggested to be more effective for CO₂ and CH₄ conversions.     

Impact of crude oil pollution on species number and live standing herbaceous crop biomass

Summary The impact of crude oil spill on the number of plant species and the above-ground live standing crop biomass (AGLSCB) of a herbaceous plant community was assessed. The spillage had a devastating effect on the herbaceous community and especially on the component herbaceous annuals. At least 80–90% of the species were absent in the affected areas in comparison to nearby unaffected areas, most of these being annuals. Perennial species were generally less affected. The total herbaceous production for a period of 12 months in the polluted areas was 885.1 gm^–2 compared with 4860.7 gm^–2 for the unaffected areas. The average monthly production in the polluted areas was 73.8 gm^–2 compared with 405.0 gm^–2 for the unaffected areas.Dr Debojit Baruah is the senior author of this paper and he is a research scholar at Dibrugarh University. Dr Sarada K. Sarma is a Pofessor in the Botany Department of Guwahati University in Assam.     

Controlled application rate of water treatment residual for agronomic and environmental benefits

Water treatment residuals (WTR) are useful soil amendments to control excessive soluble phosphorus (P) in soils, but indiscriminate additions can result in inadequate control or excessive immobilization of soluble P, leading to crop deficiencies. We evaluated the influence of application rates of an Al-WTR and various P-sources on plant yields, tissue P concentrations, and P uptake and attempted to identify a basis for determining WTR application rates. Bahiagrass (paspalum notatum Fluggae) was grown in a P-deficient soil amended with four P-sources at two application levels (N- and P-based rates) and three WTR rates (0, 10, and 25 g kg(-1) oven dry basis) in a glasshouse pot experiment. The glasshouse results were compared with data from a 2-yr field experiment with similar treatments that were surface applied to an established bahiagrass. Soil P storage capacity (SPSC) values increased with application rate of WTR, and the increase varied with sources of P applied. Soil soluble P concentrations increased as SPSC was reduced, and a change point was identified at 0 mg kg(-1) SPSC in the glasshouse and the field studies. A change point was identified in the bahiagrass yields at a tissue P concentration of 2.0 g kg(-1), corresponding to zero SPSC. Zero SPSC was shown to be an agronomic threshold above which yields and P concentrations of plants declined and below which there is little or no yield response to increased plant P concentrations. Applying P-sources at N-based rates, along with WTR sufficient to give SPSC value of 0 mg kg(-1) SPSC, enhanced the environmental benefits (reduced P loss potential) without negative agronomic impacts.     

Effects of palm oil mill effluent media on cell growth and lipid content of Nannochloropsis oculata and Tetraselmis suecica

In this study, palm oil mill effluent (POME) was used as an alternative medium for algal biomass and lipid production. The influence of different concentrations of filtered and centrifuged POME in sea water (1, 5, 10 and 15%) on microalgal cell growth and lipid yield were investigated. Both Nannochloropsis oculata and Tetraselmis suecica had enhanced cell growth and lipid accumulation at 10% POME with maximum specific growth rate (0.21 d^–1 and 0.20 d^–1) and lipid content (39.1 ± 0.73% and 27.0 ± 0.61%), respectively, after 16 days of flask cultivation. The total Saturated Fatty Acid (SFA) (59.24%, 68.74%); Monounsaturated Fatty Acid (MUFA) (15.14%, 12.26%); and Polyunsaturated Fatty Acid (PUFA) (9.07%, 8.88%) were obtained for N. oculata and T. suecica, respectively, at 10% POME. Algal cultivation with POME media also enhanced the removal of Chemical Oxygen Demand (COD) (93.6–95%), Biological Oxygen Demand (BOD) (96–97%), Total Organic Compound (TOC) (71–75%), Total Nitrogen (TN) (78.8–90.8%) and oil and grease (92–94.9%) from POME.     

Land application of carbonatic lake-dredged materials: effects on soil quality and forage productivity

The ability to reuse carbonatic lake-dredged materials (CLDM) for agricultural purposes is important because it reduces offshore disposal and provides an alternative to disposal of the materials in landfills that are already overtaxed. A four-year (2001 to 2005) study on land application of CLDM as an option for disposal was conducted on a beef cattle pasture in south central Florida. The objectives of this study were (i) to assess CLDM as a soil amendment to improve quality of sandy soils in most subtropical beef cattle pastures and (ii) to determine the effect of CLDM on productivity and nutritive values of bahiagrass (BG, Paspalum notatum Flügge) in subtropical beef cattle pasture. The five treatment combinations arranged in randomized complete block design were represented by plots with different ratios (R) of natural soil (NS) to CLDM: R1 (1000 g kg(-1):0 g kg(-1)); R2 (750 g kg(-1):250 g kg(-1)); R3 (500 g kg(-1):500 g kg(-1)); R4 (250 g kg(-1):750 g kg(-1)); and R5 (0 g kg(-1):1000 g kg(-1)). Addition of CLDM had significant (p < or = 0.001) effects on soil quality and favorable influence on forage establishment and nutritive values. Compared with the control plots (0 g kg(-1)), the soils in plots amended with CLDM exhibited (i) lower penetration resistance, (ii) an increase in soil pH and exchangeable cations (Ca and Mg), and (iii) decrease in the levels of soil trace metals (Mn, Cu, Fe, Zn, and Si). Results disclosed consistently and significantly (p < or = 0.001) higher BG biomass production (forage yield = -106.3x(2) + 1015.8x - 39.2; R(2) = 0.99**) and crude protein content (CP = 1.24x + 6.48; R(2) = 0.94**) from plots amended with CLDM than those of BG planted on plots with no CLDM treatment.