Comparison of heavy metal levels of farmed and escaped farmed rainbow trout and health risk assessment associated with their consumption

Environmental Science and Pollution Research - In this study, levels of ten metals (arsenic, cadmium, cobalt, chromium, copper, iron, manganese, nickel, lead, and zinc) in muscles of farmed and...     

Oxidative and cellular stress as bioindicators for metal contamination in freshwater mollusk Lamellidens marginalis

Environmental Science and Pollution Research - The concentrations of 14 metals, namely, chromium (Cr), manganese (Mn), cobalt (Co), nickel (Ni), copper (Cu), zinc (Zn), selenium (Se), arsenic (As),...     

Heavy metal speciation and mobility assessment of arid soils in the vicinity of Al Ain landfill, United Arab Emirates

Sixty-four surface soil samples taken in the vicinity of Al Ain landfill were analysed for cadmium, chromium, copper, nickel, lead and zinc by inductively coupled plasma spectroscopy. Extraction techniques were used to establish the association of the total concentrations of the six metals in the soil samples with their contents in the exchangeable, carbonate, iron/manganese oxides, and residual fractions. In the investigated soils, the recorded concentrations were as follows: 0.043 mg kg^-1 for cadmium, 19.1 mg kg^-1 for chromium, 53.3 mg kg^-1 for copper, 60 mg kg^-1 for nickel, 13.7 mg kg^-1 for lead, and 117 mg kg^-1 for zinc. Cadmium, chromium, nickel, lead and zinc concentrations in the investigated soil samples reflect the natural background values in shale, whereas copper is slightly enriched. I-geo (geoaccumulation index) values of the metals in the soils under study indicate that they are uncontaminated with cadmium, chromium, nickel, lead and zinc, but contaminated to moderately contaminated with copper. Heavy metal contents in the sediments were found to be significantly influenced by different physico-chemical parameters. The effect of these parameters can be arranged in the following order: clay fraction > carbonate fraction > silt fraction > organic matter fractions. A sequential extraction procedure showed that the total concentrations of the heavy metals are largely bound to the residual phase (retained 71.4% of cadmium, 77.8% of chromium, 75% of copper, 47% of nickel, 62.8% of lead, and 75.8% of zinc). A likely sequence of mobility in the investigated soils is as follows: chromium > lead > nickel > cadmium > zinc > copper.     

Performance evaluation of intermediate cover soil barrier for removal of heavy metals in landfill leachate

This pilot-scale study evaluated the use of intermediate cover soil barriers for removing heavy metals in leachate generated from test cells for co-disposed fly ash from municipal solid waste incinerators, ash melting plants, and shredder residue. Cover soil barriers were mixtures of Andisol (volcanic ash soil), waste iron powder, (grinder dust waste from iron foundries), and slag fragments. The cover soil barriers were installed in the test cells' bottom layer. Sorption/desorption is an important process in cover soil bottom barrier for removal of heavy metals in landfill leachate. Salt concentrations such as those of Na, K, and Ca in leachate were extremely high (often greater than 30 gL(-1)) because of high salt content in fly ash from ash melting plants. Concentrations of all heavy metals (nickel, manganese, copper, zinc, lead, and cadmium) in test cell leachates with a cover soil barrier were lower than those of the test cell without a cover soil barrier and were mostly below the discharge limit, probably because of dilution caused by the amount of leachate and heavy metal removal by the cover soil barrier. The cover soil barriers' heavy metal removal efficiency was calculated. About 50% of copper, nickel, and manganese were removed. About 20% of the zinc and boron were removed, but lead and cadmium were removed only slightly. Based on results of calculation of the Langelier saturation index and analyses of core samples, the reactivity of the cover soil barrier apparently decreases because of calcium carbonate precipitation on the cover soil barriers' surfaces.     

Catalytic effects by metal oxides on the formation and degradation of chlorinated aromatic compounds in fly ash

Polychlorinated benzenes, dibenzo-p-dioxins (PCDD), and dibenzofurans (PCDF) may be formed below the combustion temperature in fly ash from municipal solid waste incinerators (MSWI). Copper catalyzes this formation, possibly by the Deacon reaction. Many other elements are also Deacon catalysts or promoters, and here we report results from a statistically designed experiment with 15 metal oxides added to fly ash and heated at 300 degrees C for 2h in an air atmosphere. A resolution IV fractional factorial design with four replicates was completed in 36 runs with the oxides of magnesium, yttrium, titanium, vanadium, niobium, chromium, molybdenum, tungsten, manganese, iron, cobalt, nickel, copper, zinc, and tin. All samples were analyzed for chlorinated benzenes and the results were evaluated by analysis of variance. The addition of copper significantly increased the amounts of the chlorinated benzenes, while cobalt, chromium and vanadium decreased the net formation. The oxides of zinc and iron seemed to have a slightly positive and negative effect respectively. The findings in this study seem to corroborate our previously reported results regarding the different catalytic effects of copper and chromium, and lack of a significant effect by nickel. Besides chromium, it also identifies cobalt and vanadium as potent catalysts for oxidative degradation of the chlorinated aromatic compounds found in MSWI fly ash.     

Mosses as biomonitors of atmospheric heavy metal deposition: Spatial patterns and temporal trends in Europe

In recent decades, mosses have been used successfully as biomonitors of atmospheric deposition of heavy metals. Since 1990, the European moss survey has been repeated at five-yearly intervals. Although spatial patterns were metal-specific, in 2005 the lowest concentrations of metals in mosses were generally found in Scandinavia, the Baltic States and northern parts of the UK; the highest concentrations were generally found in Belgium and south-eastern Europe. The recent decline in emission and subsequent deposition of heavy metals across Europe has resulted in a decrease in the heavy metal concentration in mosses for the majority of metals. Since 1990, the concentration in mosses has declined the most for arsenic, cadmium, iron, lead and vanadium (52-72%), followed by copper, nickel and zinc (20-30%), with no significant reduction being observed for mercury (12% since 1995) and chromium (2%). However, temporal trends were country-specific with sometimes increases being found.     

Examination of environmental quality of raw and composting de-inking paper sludge

Paper sludges were traditionally landfilled or burned. Over the years, the use of paper sludges on soils has increased, as well as the concerns about their environmental effects. Therefore, the chemical characterization of paper sludges and their young (immature) compost needed to be investigated, and over 150 inorganic and organic chemicals were analyzed in de-inking paper sludge (DPS). In general, nitrogen, phosphorus and potassium contents were low but variable in raw DPS and its young compost. The contents of arsenic, boron, cadmium, cobalt, chromium, manganese, mercury, molybdenum, nickel, lead, selenium, and zinc were also low and showed low variability. However, the copper contents were above the Canadian compost regulation for unrestricted use and required a follow-up. The fatty- and resin acids, and polycyclic aromatic hydrocarbons were the organic chemicals measured at the highest concentrations. For resinic acids, care should be taken to avoid that leachates reach aquatic life. For polycyclic aromatic hydrocarbons, naphthalene should be followed until soil content reaches 0.1 microg g(-1), the maximum allowed for soil use for agricultural purposes according to Canadian Environmental Quality Guidelines. In young compost, the concentration of these chemical families decreased over time and most compounds were below the detection limits after 24 weeks of composting. In raw DPS, among the phenol, halogenated and monoaromatic hydrocarbons, dioxin and furan, and polychlorinated biphenyl families, most compounds were below the detection limits. The raw DPS and its young compost do not represent a major threat for the environment but can require an environmental follow-up.     

Heavy metal accumulation by Nicotiana glauca Graham in a solid waste disposal site

Nicotiana glauca Graham, is the only perennial shrub growing in a solid waste contaminated site in the Negev desert of Israel. The concentration of heavy metals (Cu, Fe, Mn, Zn, Ni, Cd and Pb) in the upper soil layer was significantly higher (p<0.01) than in non-contaminated desert soil. In root and shoot of N. glauca, growing in the site, the concentration of Cu, Zn and Fe was significantly higher (p<0.05) than in plants of a non-contaminated site. In a controlled experiment, the concentrations of Zn and Cu in root of plants grown, in a mixture of contaminated and non-contaminated soil (1:1) was 9.5 and 4.7 higher than that of plants grown in non-contaminated soil, respectively. While Zn was accumulated in shoot of plants grown in contaminated soil (531 mgkg(-1)) in significantly higher concentration than in plants grown in non-contaminated soil (56 mgkg(-1)), no significant differences were found in Cu accumulation. Growth of N. glauca was inhibited on contaminated soil, but no other obvious stress symptoms were apparent. Therefore, long term experiments under controlled conditions are planned to study the mechanism of heavy metal tolerance and accumulation in N. glauca.     

Efficiency of lipopeptide biosurfactants in removal of petroleum hydrocarbons and heavy metals from contaminated soil

This study describes the potential application of lipopeptide biosurfactants in removal of petroleum hydrocarbons and heavy metals from the soil samples collected from industrial dumping site. High concentrations of heavy metals (like iron, lead, nickel, cadmium, copper, cobalt and zinc) and petroleum hydrocarbons were present in the contaminated soil samples. Lipopeptide biosurfactant, consisting of surfactin and fengycin was obtained from Bacillus subtilis A21. Soil washing with biosurfactant solution removed significant amount of petroleum hydrocarbon (64.5 %) and metals namely cadmium (44.2 %), cobalt (35.4 %), lead (40.3 %), nickel (32.2 %), copper (26.2 %) and zinc (32.07 %). Parameters like surfactant concentration, temperature, agitation condition and pH of the washing solution influenced the pollutant removing ability of biosurfactant mixture. Biosurfactant exhibited substantial hydrocarbon solubility above its critical micelle concentration. During washing, 50 % of biosurfactant was sorbed to the soil particles decreasing effective concentration during washing process. Biosurfactant washed soil exhibited 100 % mustard seed germination contradictory to water washed soil where no germination was observed. The results indicate that the soil washing with mixture of lipopeptide biosurfactants at concentrations above its critical micelle concentration can be an efficient and environment friendly approach for removing pollutants (petroleum hydrocarbon and heavy metals) from contaminated soil.     

Effect of warfare waste on soil: a case study of Gallipoli Peninsula (Turkey)

Gallipoli is a small town on the European side of the Dardanelles Strait, in Turkey. More than 450,000 soldiers gave their lives on the Gallipoli Peninsula (Gallipoli Campaign) over a nine-month period during World War I. In that war, many naval and landing bombs were exploded. The ingredients of these bombs may cause heavy metal contamination in soils. An environmental geochemical investigation has been carried out around Gallipoli Peninsula in order to determine the extent of chemical pollution in the soil. The preliminary data reveal that soils in the area are, in general, not contaminated. The concentrations of many heavy metals, such as arsenic (As), cadmium (Cd), copper (Cu), chromium (Cr), cobalt (Co), manganese (Mn), nickel (Ni), lead (Pb), strontium (Sr), vanadium (V) and zinc (Zn) are in the range of those of average agricultural soils. These low concentrations are explained by the good leaching characteristics of Oligocene–Miocene rocks, Pleistocene terrace material, alluvium sandy-silty soils, and surface run-off.     

Removal of trace elements in three horizontal sub-surface flow constructed wetlands in the Czech Republic

Between March 2006 and June 2008 removal of 34 trace elements was measured on a monthly basis at three horizontal-flow constructed wetlands in the Czech Republic designed to treat municipal wastewater. In general, the results indicated a very wide range of removal efficiencies among studied elements. The highest degree of removal (average of 90%) was found for aluminum. High average removal was also recorded for zinc (78%). Elements removed in the range of 50-75% were uranium, antimony, copper, lead, molybdenum, chromium, barium, iron and gallium. Removal of cadmium, tin, mercury, silver, selenium and nickel varied between 25 and 50%. Low retention (0-25%) was observed for vanadium, lithium, boron, cobalt and strontium. There were two elements (manganese and arsenic) for which average outflow concentrations were higher compared to inflow concentrations. Reduced manganese compounds are very soluble and therefore they are washed out under anaerobic conditions.     

Investigation of heavy metal accumulation in Polygonum thunbergii for phytoextraction

In this study, cadmium (II), lead (II), copper (II) and zinc (II) were determined in Polygonum thunbergii and soil from the Mankyung River watershed, Korea. Soil samples contained detectable lead (<17.5 g g(-1)), copper (<8.4 g g(-1)) and zinc (<24.5 g g(-1)), whereas cadmium was undetectable. Whole plants of P. thunbergii contained detectable lead (<320.8 g g(-1)), copper (<863.2 g g(-1)) and zinc (<2427.3 g g(-1)), whereas cadmium was detectable only in the stem (<7.4 g g(-1)) and root (<10.1 g g(-1)). Whole plant concentrations were very different for each metal, particularly in the case of zinc. The mean content of heavy metal in the whole plants increased in the order of cadmium (8.5 g g(-1))相似文献   

Ruminant uptake of nickel and other elements from industrial air pollution in the Norwegian-Russian border area

Concentrations of the elements aluminium, arsenic, cadmium, chromium, cobalt, copper, lead, mercury, nickel, selenium and zinc in liver, and of nickel in kidneys, were studied in reindeer, moose and sheep from South Varanger in eastern Finnmark and comparable districts in western Finnmark, Norway. The study included samples from 31 reindeer, 10 moose and 10 sheep from Jarfjord (South Varanger); 31 reindeer, 27 moose and 15 sheep from Pasvik (South Varanger); and 40 reindeer, 16 moose and 15 sheep from western Finnmark. Levels of arsenic, copper, nickel and selenium were much higher in reindeer from one or both areas in South Varanger than in reindeer from western Finnmark. Levels of chromium, cobalt and zinc were also significantly higher in South Varanger reindeer than in reindeer from the reference area. Within South Varanger the highest levels of these elements were invariably found in the Jarfjord area. For the other elements studied hepatic levels in South Varanger were similar to or lower than in western Finnmark. Also in moose, higher levels of nickel and of selenium (Jarfjord only) were found in the South Varanger samples than in samples from western Finnmark. In sheep, on the other hand, levels in South Varanger samples were similar to levels in western Finnmark for all the elements studied. Comparing the results with reports on pollution of air and vegetation, it was concluded that for all the elements showing higher levels in reindeer and moose from South Varanger compared to the reference areas, the effect most probably was a result of atmospheric transport of industrial pollution from the nearby Russian towns Nikel and Zapoljarnij. The geographical and interspecies differences within the South Varanger samples support this conclusion.     

Biosolids-amended soils: Part I. Effect of biosolids application on soil quality and ecotoxicity.

Investigations of potential risk from biosolids generally indicate that land application does not threaten human or ecosystem health, but questions continue to arise concerning the environmental effects of this practice. This research project was initiated to evaluate ecotoxicity resulting from the amendment of soils with biosolids from municipal wastewater treatment plants. Toxicity was evaluated using standard tests, including earthworm mortality, growth, and reproduction; seedling germination and root elongation; microbial respiration; and nematode mortality and reproduction. Nineteen municipal wastewater treatment plants were identified to participate in an initial screening of toxicity, and five were chosen for a more detailed evaluation. In addition, two soils with historically high applications of high-metal biosolids were evaluated. Contaminants examined were zinc, copper, nickel, chromium, arsenic, cadmium, lead, and coplanar polychlorinated biphenyls (PCBs). Single applications had no effect on soil metal concentrations. Coplanar PCBs were not detectable in any of the soils or biosolids. All target organisms were sensitive to reference toxicants. Limited toxicity was observed in a small number of the amended soils, but no patterns emerged. Approximately one-half of the negative effects of biosolids on bioindicators could be attributed to routine properties, such as slight depression of pH and/or elevated salinity. None of the accumulated metal concentrations were excessive, and most would not be considered elevated. These observations suggest that current regulations for application of biosolids to soils are providing adequate ecosystem protection.     

Accumulation of heavy metals and antioxidant responses in Vicia faba plants grown on monometallic contaminated soil

The purpose of this study was to explore the effects of soil contamination by selected metals (cadmium, copper, nickel, lead or zinc) on the antioxidant response of Vicia faba plants. The levels of the antioxidants: glutathione, proline, non-protein thiols, as well as guaiacol peroxidase and catalase activities were measured in the upperparts of plants. Additionally, the potential bioavailability of metals in the soil and their concentrations in V. faba plants were compared. Treatment with metal caused the problem of an elevation in its bioavailability in soil and its concentration in leaves and stems. The most serious problems seemed to be metal elevations in soil, especially Zn and Ni as well as in the aerial parts of V. faba plants. The antioxidant responses appeared to be metal specific. The elevation of guaiacol peroxidase activity in leaves and stems as well as the proline in leaves was the only more general reaction to metal exposure. Upon analysis of the effects of soil metal contamination on V. faba plants, we recommend the use of some measurements such as guaiacol peroxidase activity and proline level as useful tools in biological monitoring.     

Trace metals in mussels from mariculture zones, Hong Kong

In 1997, concentrations of cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb) and nickel (Ni) were analysed in green-lipped mussels (Perna viridis) from three mariculture zones located in the north-east (Kat O), south (Lo Tik Wan) and to the west (Ma Wan) of Hong Kong. Spatial differences in the concentration of metals were found, chromium and copper were higher at Ma Wan and Lo Tik Wan compared to Kat O in the north-east. In contrast, the highest levels of lead (mean = 4.37 microg/g dry wt) were recorded at Kat O. There were no differences in the level of nickel between the study sites. A comparison of the metal concentrations in mussels with the results of a previous study seven years before, in 1990, showed a twofold increase in the mean levels of cadmium for all three sites. However, levels of the other metals in 1997 were lower by 12-32% for chromium, 32-39% for copper and 24-25% for nickel. The greatest reductions were recorded for lead: Kat O (39%), Ma Wan (51%) and Lo Tik Wan (75%). This may be related to the introduction of lead-free petrol in 1991. Despite the apparent reduction in some heavy metal bioaccumulation between 1990 and 1997, from a public health risk perspective, the data suggest a continued need for monitoring of heavy metals in mussels from mariculture zones.     

Uptake and accumulation of cadmium, lead and zinc by Siam weed [Chromolaena odorata (L.) King & Robinson

The Siam weed, Chromolaena odorata (L.) King & Robinson, Family Asteraceae, was found to be a new Pb hyperaccumulator by means of field surveys on Pb soil and hydroponic studies. Plants from field collection accumulated 1377 and 4236mgkg(-1) Pb in their shoots and roots, respectively, and could tolerate soil Pb concentrations up to 100000 mgkg(-1) with a translocation factor of 7.62. Very low concentrations of Cd and Zn were found in plants collected from the field. Under nutrient solution culture condition, C. odorata from the contaminated site (CS) and from non-contaminated site (NCS) grew normally with all three metals (Pb, Cd, Zn) supplied. However, the relative growth rates of all treated plants decreased with increased metal concentrations. The percentage uptakes of Pb, Cd, and Zn by C. odorata increased with increasing metal concentrations. Pb concentration in shoots and roots reached its highest values (1772.3 and 60655.7mgkg(-1), respectively) at a Pb supply level of 10mgl(-1). While the maximum concentrations of Cd (0.5mgl(-1)) in shoots and roots of C. odorata were 102.3 and 1440.9mgkg(-1), and the highest concentrations of Zn (20mgl(-1)) were 1876.0 and 7011.8mgkg(-1), respectively. The bioaccumulation coefficients of Pb and Cd were greater than 1000. These results confirm that C. odorata is a hyperaccumulator which grows rapidly, has substantial biomass, wide distribution and has a potential for the phytoremediation of metal contaminated soils.     

Heavy metal concentrations in the liver of three duck species: influence of species and sex

To investigate interspecific and intersex differences in heavy metal levels, we analysed concentrations of cadmium, cobalt, chromium, copper, lead, mercury, manganese, nickel and zinc in the livers of male and female black duck (Anas rubripes), mallard (A. platyrhynchos) and greater scaup (Aythya marila) collected in Raritan Bay, New Jersey in December 1980 and January 1981. Certain metal levels varied significantly by species and sex. In all species, Zn and Cu had the highest concentrations, and Cd, Co, and Hg were lowest in all three species. Scaup had significantly higher levels of Cu than black ducks and mallards, and mallards had significantly higher levels of Mn and Zn than black duck and scaup. Overall, eight of nine metal levels were higher in male than female black duck. In scaup, females had significantly higher levels of Pb and Mn than males. In black ducks, males had significantly higher levels of Cu, Mn and Zn than females. The sample of mallard was too small to test intersex differences.     

Distribution of chromium, cadmium, nickel and lead in agricultural soils collected from Kazanli-Mersin, Turkey

This study reports total levels of chromium, cadmium, nickel and lead in the agricultural land adjacent a factory producing chromate compounds in Kazanli-Mersin. Surface soil samples were collected from fields around the factory as well as from fields farther away to measure contamination due to aerial transportation and deposition of dust produced in the industrial process. Heavy metals in soil were extracted using wet digestion, and concentrations were measured by atomic absorption spectrophotometry. The concentrations were compared with Turkish maximum allowable concentration values. The metal concentrations averaged 80, 0.14, 228 and 431mg1kg^-1 for chromium, cadmium, nickel and lead, respectively. Soil samples contaminated with chromium were mainly found 500–20001m from the factory and decreased with increasing distance from the factory. Elevated chromium and nickel concentrations were determined in the soils around the factory, especially to the northwest (prevailing wind) and west. Lead concentrations exceeded the limit in only roadside soils (4000 and 50001m to the west), but tended to increase in the vicinity of industrial activity (especially in the west, the northwest and the north). The cadmium concentration did not exceed the limit and was within the normal range for soils.     

Enhanced removal of heavy metals in primary treatment using coagulation and flocculation.

The goal of this study was to determine the removal efficiencies of chromium, copper, lead, nickel, and zinc from raw wastewater by chemically enhanced primary treatment (CEPT) and to attain a total suspended solids removal goal of 80%. Operating parameters and chemical doses were optimized by bench-scale tests. Locally obtained raw wastewater samples were spiked with heavy metal solutions to obtain representative concentrations of metals in wastewater. Jar tests were conducted to compare the metals removal efficiencies of the chemical treatment options using ferric chloride, alum, and anionic polymer. The results obtained were compared with those from other studies. It was concluded that CEPT using ferric chloride and anionic polymer is more effective than CEPT using alum for metals removal. The CEPT dosing of 40 mg/L ferric chloride and 0.5 mg/L polymer enhanced heavy metals removal efficiencies by over 200% for chromium, copper, zinc, and nickel and 475% for lead, compared with traditional primary treatment. Efficient metals capture during CEPT can result in increased allowable headworks loadings or lower metal levels in the outfall.