Improving public understanding of environmental issues through effective communication

A lack of understanding about the environmental implications of a proposed project may cause the public to perceive a risk of inflated value and, ultimately, bring the project to a complete and permanent standstill. The authors outline an approach to public education and involvement that focuses on two-way communication and promotes the development of acceptable solutions to critical environmental issues.     

Importance of information on tillage practices in the modelling of environmental processes and in the use of environmental indicators

Tillage has been and will always be integral to crop production. Tillage can result in the degradation of soil, water, and air quality. Of all farm management practices, tillage may have the greatest impact on the environment. A wide variety of tillage equipment, practices and systems are available to farmers, providing opportunities to enhance environmental performance. These opportunities have made tillage a popular focus of environmental policies and programs such as environmental indicators for agriculture. This paper provides a very brief examination of the role of tillage in crop production, its effect on biophysical processes and, therefore, its impact on the environment. Models of biophysical processes are briefly examined to demonstrate the importance of tillage relative to other farm management practices and to demonstrate the detail of tillage data that these models can demand. The focus of this paper is an examination of the use of information on tillage in Canada's agri-environmental indicators initiative, National Agri-environmental Health Analysis and Reporting Program (NAHARP). Information on tillage is required for several of the indicators in NAHARP. The type of data used, its source, and its quality are discussed. Recommendations regarding the collection of tillage data and use of tillage information are presented.     

A comparison of waste-reduction practices and new environmental paradigm of rural and urban Chinese citizens

This paper compares the public attitudes of three southern Chinese cities/towns, namely Guangzhou, Dongguan, and Yuanzhou on waste recycling and avoidance, and the New Environmental Paradigm (NEP). The latter describes the concept of treating the resources and the ecosystems on Earth as things having their own rights rather than being subordinate and subservient to humans. These three places are chosen to represent areas in different stages of urbanization in the Guangdong province. As Hong Kong is also a southern Chinese city, where data of similar nature are available, comparison with Hong Kong is also made. It was found that the support for source separation of household waste in the rural and urban areas in mainland China was greater than that found in Hong Kong. Concerning actual practices on waste separation, about 85% of the respondents in the cities and almost all of the rural household surveyed have the habit of saving up and selling the recyclables. It is estimated that about 11-13% of the household waste was diverted in such a way. This is higher than the estimated 8% household waste recovery rate of Hong Kong. The majority of the respondents in the three surveyed cities have recovered household recyclables in the past but with higher family incomes, it was now less common. On the contrary, the lower income group tended to recover greater portion of their waste for selling to the waste depots. These findings have implications on the future waste management policy formulation in China. Regarding the acceptance of the New Environmental Paradigm, it was found that the rural population scored better than the urban population and they tended to agree more frequently with the NEP. However, the rural population perceives a greater potential for industrial and urban development without dampening environmental quality. It was also found that the NEP scores of the mainland Chinese are higher, in general, than their Hong Kong counterparts as measured in early 1990s. Insufficient public support has often been a concern for source separation programmes in all countries despite the obvious waste management benefits of recycling. This study shows that there is overwhelming support for source separation of waste in Mainland China, whether it is in rural or urban communities, and that most people are already undertaking source separation due to the redemption value of the recyclables. Therefore, for policy-makers, the concern should not be on whether the public knows how to separate the waste but rather on how to motivate them to separate waste for the good of society, and how to maintain an effective market for recyclables.     

Assisting Australian indigenous resource management and sustainable utilization of species through the use of GIS and environmental modeling techniques

Information on distribution and relative abundance of species is integral to sustainable management, especially if they are to be harvested for subsistence or commerce. In northern Australia, natural landscapes are vast, centers of population few, access is difficult, and Aboriginal resource centers and communities have limited funds and infrastructure. Consequently defining distribution and relative abundance by comprehensive ground survey is difficult and expensive. This highlights the need for simple, cheap, automated methodologies to predict the distribution of species in use, or having potential for use, in commercial enterprise. The technique applied here uses a Geographic Information System (GIS) to make predictions of probability of occurrence using an inductive modeling technique based on Bayes' theorem. The study area is in the Maningrida region, central Arnhem Land, in the Northern Territory, Australia. The species examined, Cycas arnhemica and Brachychiton diversifolius, are currently being 'wild harvested' in commercial trials, involving sale of decorative plants and use as carving wood, respectively. This study involved limited and relatively simple ground surveys requiring approximately 7 days of effort for each species. The overall model performance was evaluated using Cohen's kappa statistics. The predictive ability of the model for C. arnhemica was classified as moderate and for B. diversifolius as fair. The difference in model performance can be attributed to the pattern of distribution of these species. C. arnhemica tends to occur in a clumped distribution due to relatively short distance dispersal of its large seeds and vegetative growth from long-lived rhizomes, while B. diversifolius seeds are smaller and more widely dispersed across the landscape. The output from analysis predicts trends in species distribution that are consistent with independent on-site sampling for each species and therefore should prove useful in gauging the extent of resource availability. However, some caution needs to be applied as the models tend to over predict presence which is a function of distribution patterns and of other variables operating in the landscape such as fire histories which were not included in the model due to limited availability of data.     

环境监测数据审核及异常数据的处理

准确、可靠、可比的环境监测数据是环境科学研究工作的基础,是环境管理的依据。本文介绍了环境监测数据审核的意义,提出环境监测数据应从代表性、完整性、精密性、准确性和可比性进行审核,才能保证监测数据的质量。并提出了监测结果异常数据的几种判断及处理方法。     

Discovering meaningful information from large amounts of environment and health data to reduce uncertainties in formulating environmental policies

This study uses knowledge discovery concepts to analyze large amounts of data step by step for the purpose of assisting in the formulation of environmental policy. We performed data cleansing and extracting from existing nation-wide databases, and used regression and classification techniques to analyze the data. The current water hardness in Kaohsiung, Taiwan contributes to the prevention of cardiovascular disease (CVD) but exacerbates the development of renal stones (RS). However, to focus on water hardness alone to control RS would not be cost effective at all, because the existing database parameters do not adequately allow for a clear understanding of RS. Analysis of huge amounts of data can most often turn up the most reliable and convincing results and the use of existing databases can be cost-effective.     

Promoting environmental awareness in Botswana: the role of community education

Summary This paper highlights the environmental problems confronting Botswana, which include growing pressure on water resources resulting from increases in population, urbanization and development, deforestation, overgrazing and rangeland degradation in the face of unfavourable environmental and climatic conditions. The paper also describes the role of the government through its National Conservation Strategy, and how this proffers possible solutions to these probems. Such solutions include, among others improved planning and administrative measures in the interest of both protecting water resources against pollution and the possible introduction of an incentive to encourage the collection of rain water, and government legislation which will lead to improvement in the management of both rangelands and livestock to prevent rangeland degradation, as well as the government intention to update its forestry policy to provide a comprehensive National Forestry Management Plan. The paper also examines the efforts of nongovernmental organizations including the Kalahari Conservation Society, the Forestry Association of Botswana, Thusano Lefatsheng and the Botswana Society. These non-governmental organizations are greatly involved in natural resource conservation and utilization and, in addition, they provide avenues for the discussion of issues relating to the environment and natural resources for public awareness. The paper finally discusses the role of community education, by examining the environmental awareness in terms of the population.This paper was presented at the Global Forum '94 Academic Conference, Manchester, UK.     

Facilitating substance phase‐out through material information systems and improving environmental impacts in the recycling stage of a product

The amount of electrical and electronic products is increasing rapidly, and this inevitably leads to the generation of large quantities of waste from these goods. Some of the generated e‐waste ends up in regions with sub‐standard recycling systems and may be processed under poor conditions. During uncontrolled incineration, halogenated dioxins and furans can be generated from brominated and chlorinated compounds in the products. In order to reduce the health and environmental risks involved in the recycling stage of the life cycle of electronics, an effective design‐for‐environment process must be established during the product development phase. Knowledge of the chemical substances in the product is crucial to being able to make informed decisions. Through full knowledge of the material content of procured components, phase‐outs of unwanted substances, such as halogenated substances, can be performed in an effective manner. Therefore, information is the key to success in phasing‐out substances; facilitating compliance of legal provisions for manufacturers of electrical and electronic devices; and improving the environmental footprint of products as they reach the end of the life cycle. After an introduction to the challenges of electronics waste management, this paper describes supply chain information systems and how they are used to facilitate substance phase‐outs in the electronics industry. Sony Ericsson has been working with phase‐outs of unwanted substances since it was founded in 2001. Through the introduction of a material declaration system that keeps track of all substances in the components used in the company's products, Sony Ericsson has been able to replace unwanted substances to improve environmental impacts at the recycling stage of a product.     

Making environmental policy work with civic science: the intermediary role of expert citizens at the Japanese local level

The aim of the present article is to examine the importance of public participation in the production and use of environmental science, with special reference to “expert citizens” who can facilitate and mediate between expert knowledge and lay people. The study of expert citizens is largely unexplored in Japan's environmental policy. As uncertainty, inherent in the complexity of environmental science, increases, there are calls for refashioning expert knowledge into a more citizen–expert interactive governance. In the USA, the way that lay people can participate in scientific knowledge application and policy-making is organised through grassroots and national environmental organisations, such as the National Resources Defense Council. In Japan, such professional associations that build networks of interaction with scientific experts, policy-makers, interest groups and the media, have yet to emerge on a wider scale. Nonetheless, voluntary citizens individually or collectively have developed their expertise over many years and have begun to play an intermediary role at the local level. This article will analyse the potential roles of expert citizens by conducting the case studies of two Japanese localities, Shiki and Joyo cities.     

Expanding the benefits of environmental management systems through DFE

Industry's role in environmental protection is changing and growing. Increasing evidence shows that a corporation's understanding and response to environmental issues and concerns can have strategically important consequences for some kinds of businesses.¹ Focusing on concepts of prevention, industry has developed and struggled with a number of environmental approaches, all of which attempt to link the environment with common business practice. Industry has followed and in some cases embraced concepts and approaches like sustainable development, eco-efficiency, green manufacturing, pollution prevention, and extended product responsibility. A particularly timely and promising strategy to reduce the environmental impact of both manufacturing and product use while enhancing business success is the integration of environmental management systems (EMS) with design for the environment (DFE) efforts. A desirable relationship can and should exist between DFE and EMS. This relationship has not been well understood, but is crucial to fulfill the promise of each. In application, the institutionalization of DFE in an organization is difficult and tenuous at best. Some authors suggest that management issues block the implementation of DFE.² Others say that DFE has not been institutionalized to the extent that pollution prevention has.³ This article suggests that through an explicit connection between an EMS and DFE, DFE can extend the promise of EMS to reduce industry's environmental impact and produce business success, and it can do so in an ongoing way. The authors will show the importance of an EMS/DFE linkage, suggest company types that might benefit from investigating these approaches, and then review a series of DFE tool types.     

Effective communication about complex environmental issues: Perceived quality of information about carbon dioxide capture and storage (CCS) depends on stakeholder collaboration

This experimental research addresses the effectiveness of communication about complex environmental issues, depending on whether the same information is provided by multiple collaborating or by individual organizations (i.e., stakeholders). The information provided pertains to carbon dioxide capture and storage (CCS) technology, as an example of a complex environmental issue. In Studies 1 (N = 75) and 2 (N = 66) we found that participants perceived factual information from collaborating stakeholders to be of higher quality than when the same information was provided by individual stakeholders. As predicted, the expectation of diverse perspectives being represented in the collaborative information mediated this effect. In addition, in Study 3 (N = 79) the perceived dissimilarity of collaborating stakeholders was shown to be an important precondition for the collaboration effect observed in Studies 1 and 2. Finally, these studies indicate that occasional collaboration between different stakeholders does not necessarily harm the perceived credibility of each individual stakeholder.     

Estimating the reduction of urban PM10 concentrations by trees within an environmental information system for planners

Trees have been widely quoted as effective scavengers of both gaseous and particulate pollutants from the atmosphere. Recent work on the deposition of urban aerosols onto woodland allows the effect of tree planting strategies on airborne aerosol concentrations to be quantified and considered within the planning process. By identifying the potential planting locations in the local authority area, and applying them within a dispersion and deposition model, the potential magnitude of reduction in the ambient concentration of PM(10), achievable through urban tree planting, has been quantified for two UK cities. As part of the Environmental Information Systems for Planners (EISP), flow diagrams, based on planning decisions, have incorporated output from the model to make decisions on land use planning ranging from development plans and strategic planning, to development control. In this way, for any new developments that contribute to the local PM(10) level, the mitigation by planting trees can be assessed, and in some cases, reductions can be sufficient to meet air quality objectives for PM(10).