重金属污染土壤的草酸和EDTA混合淋洗研究

采用不同浓度的草酸(oxalic acid,OX)和乙二胺四乙酸(EDTA)混合的淋洗方法研究重金属污染土壤的最佳混合淋洗方式,探讨了液固比、淋洗时间及pH对淋洗效果的影响,并分析了0.2 mol/L OX+0.2 mol/L EDTA处理前后土壤中重金属形态的变化。结果表明,采用0.2 mol/L OX+0.2 mol/L EDTA混合的淋洗法可同时去除多种重金属,且对Cu、Zn、Ni和Cr的去除率明显高于单用OX和EDTA,去除率分别为Cu 41.29%、Zn 84.73%、Ni 54.2%和Cr 66.01%。0.2mol/L OX+0.2 mol/L EDTA在液固比为5∶1、淋洗时间为4 h、pH为6时可分别达到最佳淋洗效果,且分别为Cu 62.59%、Zn 93.48%、Ni 55.95%和Cr 71.57%;Cu 50.47%、Zn 86.67%、Ni 61.53%和Cr 72.68%;Cu 44.40%、Zn 81.82%、Ni68.76%和Cr 74.93%。形态分析结果表明,0.2 mol/L OX+0.2 mol/L EDTA能较好地改变土壤中重金属形态的分布。     

铅锌厂重金属污染土壤的螯合剂淋洗修复及其应用

为探讨螯合剂淋洗法在修复铅锌厂周边重金属污染土壤的修复效果及淋洗后土壤利用价值,研究采用振荡淋洗的方法比较了乙二胺四乙酸(EDTA)、次氮基三乙酸三钠盐(NTA)、[S,S]-乙二胺-N,N-二琥珀酸三钠盐(EDDS)乙二醇-双-(2-氨基乙醚)四乙酸(EGTA)4种螯合剂对不同污染程度土壤中Cd、Cu、Zn、Pb的去除效果,并用BCR连续提取法分析了淋洗前后土壤重金属形态的变化,最后通过黑麦草盆栽实验及土壤酶分析,探讨了土壤经淋洗后的利用价值。结果表明,4种螯合剂中EDTA对Cd、Cu、Zn和Pb的去除率比其他螯合剂的去除率高,其中对高污染土壤4种重金属离子的去除率最大,分别为Cd 90.98%、Cu 42.10%、Zn 56.98%和Pb 52.03%,4种重金属中Cd的去除效果分别为EDTANTAEDDSEGTA;EDTA能有效去除酸溶态、可还原态土壤重金属,而对可氧化态和残余态土壤重金属作用效果不明显;EDTA淋洗土种植黑麦草后土壤脱氢酶、碱性磷酸酶和β-葡糖苷酶活性均高于NTA淋洗后土壤中酶活性。综合考虑淋洗效率、淋洗剂的成本和利用价值等因素,可以认为,采用EDTA和NTA淋洗修复重金属污染土壤具有一定的实用性,并以EDTA效果较佳。     

有机酸对成都平原镉污染土壤的淋洗效果

以成都平原某化工厂附近受Cd污染的2种土壤为对象,采用振荡淋洗技术,研究了有机酸在不同浓度、固液比、振荡时间和复合淋洗条件下对重金属Cd的去除效果。实验结果表明:柠檬酸和酒石酸对Cd含量为22.78 mg·kg~(-1)的SLT-01土壤具有更好的去除效果,分别达到73%和62%,而乙酸和草酸的去除能力较低;随着固液比的降低,有机酸对Cd的去除率逐步提高;随着时间的增加,Cd的去除率波动增加;柠檬酸和酒石酸复合淋洗并没有提高Cd的去除率;振荡淋洗前后土壤结构未发生明显变化。综合考虑土壤中Cd的去除效果和成本,选择柠檬酸作为最佳淋洗剂;最佳实验条件:溶液浓度为0.10 mol·L~(-1),固液比为1∶20,淋洗时间为8 h。     

超声强化淋洗修复Pb、Cd、Cu复合污染土壤

针对传统淋洗法修复土壤中重金属效率较低的问题,研究了超声强化淋洗技术以提高重金属去除率。以铅(Pb)、镉(Cd)、铜(Cu)为目标污染物,在0.05 mol·L~(-1)柠檬酸、0.05 mol·L~(-1)EDTA和0.05 mol·L~(-1)皂角苷作为淋洗剂条件下,使用传统振荡、超声强化以及超声波加振荡3种不同的作用方式,对Pb、Cd、Cu的去除率进行比较,并对3种不同淋洗方式后Pb、Cd、Cu的形态变化进行了探讨。结果表明,当使用柠檬酸和皂角苷作为淋洗剂进行振荡淋洗时,重金属洗脱效果不理想。超声对于强化柠檬酸洗脱效果并不明显,而对于强化皂角苷洗脱重金属效果明显,平均去除率提高了120.47%。当淋洗剂为EDTA时,土壤样品在传统振荡2 h作用下,对Pb、Cd、Cu的去除率依次为50.33%、76.65%和47.35%,而在超声波30 min条件下对Pb、Cd、Cu的去除率依次为82.19%、83.31%和53.89%,平均去除率高出28.60%,可显著提高重金属去除率,缩短淋洗时间。但超声波30 min加传统振荡2 h相较于单纯超声强化效果提升不明显。通过对比3种淋洗方式后土壤中的Pb、Cd、Cu形态发现,酸可提取态的重金属在超声强化作用后有明显降低,同时超声强化对于铁锰氧化物结合态、有机物结合态和残渣态也具有较好的去除能力。因此,超声强化在化学淋洗中的应用具有一定的可行性,是一种简单、极快速去除污染场地中重金属Pb、Cd、Cu的增效手段。     

不同化学淋洗剂对复合重金属污染土壤的修复机理

化学淋洗技术是一种常用的重金属污染土壤修复技术,化学淋洗剂的选择尤为重要。以乙二胺四乙酸二钠(EDTA),柠檬酸(CA)和三氯化铁(FeCl_3)为化学淋洗剂,采用振荡淋洗法研究淋洗时间与淋洗剂浓度对Cu、Zn、Pb和Cd去除效果的影响,分析重金属污染土壤淋洗前后重金属形态与基本理化性质的变化。结果表明:3种化学淋洗剂对重金属的快速反应阶段基本在60 min内,在240 min达到淋洗平衡,对Pb和Cd的淋洗主要是非均相扩散过程;EDTA、柠檬酸和FeCl_3对重金属的去除能力依次为PbCdCuZn,CdZnCuPb与Pb≈CdCuZn,EDTA的淋洗效率最高,Cd的解吸能力最强;EDTA和FeCl_3可有效去除弱酸可溶态与可还原态重金属,柠檬酸能有效去除弱酸可溶态重金属,修复后的土壤仍有环境风险;3种淋洗剂修复后的土壤中总有机碳与粒径分布无明显变化,FeCl_3会酸化土壤。综合考虑,EDTA、柠檬酸和FeCl_3均为淋洗效果好的环境友好型化学淋洗剂,该研究成果可用于现场淋洗去除土壤中重金属的小试。     

3种植物水浸提液对工业园区污水处理厂污泥中重金属的淋洗效果

为探讨植物材料淋洗去除工业园区污水污泥中重金属的可行性,选用马桑(Coriaria nepalensis)、枳椇子(Hovenia acerba)和乌药(Lindera aggregata)的水浸提液作为淋洗剂,采用振荡淋洗实验研究了不同淋洗剂浓度和pH、淋洗时间和温度对其去除供试污泥中重金属的影响,并确定淋洗的最佳参数。结果表明,当3种淋洗剂浓度从20 g·L~(-1)上升到80 g·L~(-1)或淋洗温度从15℃增至55℃时,重金属去除率均呈先升高后稳定的趋势。同时,淋洗效果还受淋洗剂pH和淋洗时间的影响。基于淋洗效果、技术应用和经济成本,枳椇子、乌药和马桑水浸提液淋洗的最佳参数分别为pH 7、80 g·L~(-1)、25℃、180 min,pH 4、100 g·L~(-1)、25℃、180 min和pH 4、80 g·L~(-1)、25℃、180min,此时各淋洗剂重金属去除率总体表现为CdCuPbNi。其中枳椇子和乌药对Cd去除率较高,分别为73.12%和82.60%,但Ni去除率仅为23.34%和19.42%;与前2种植物材料相比,马桑对Pb(36.40%)和Ni(27.88%)的去除率高,但对Cd(30.11%)和Cu(30.38%)的去除率相对较低。淋洗后污泥中Cu和Pb含量均可达农用污泥A级标准(CJ/T 309-2009),乌药淋洗后Cd及马桑淋洗后Ni含量可达到A级标准,其他淋洗剂情况下Cd和Ni含量可达到B级标准。此外,植物水浸提液淋洗污泥还能有效保留甚至增加其养分,降低可交换态、碳酸盐结合态和铁锰结合态重金属含量。研究表明,马桑、枳椇子和乌药在淋洗去除污泥中重金属和实现污泥土地应用上有一定潜力。     

重金属-多氯联苯复合污染土壤同步洗脱

电子垃圾拆解区土壤具有重金属与有机物复合污染的特性,尤其以Cu、Pb、Cd和多氯联苯(PCBs)的复合污染较为突出。为了同步脱除土壤中重金属与PCBs,选用增溶物质:Tween 80、TX-100、SDBS、β-环糊精与螯合剂柠檬酸依次组合进行复合污染土壤淋洗实验,应用批量平衡震荡法研究它们对重金属(Cu、Pb、Cd)与PCBs(Aroclor 1254)的洗脱效果。通过比较洗脱效果、环境友好性等方面,得出非离子表面活性剂Tween 80与天然螯合剂柠檬酸2种淋洗剂复合最佳;进一步研究两者的淋洗先后顺序、浓度配比、洗脱时间及淋洗剂p H对污染土壤洗脱效果的影响,结果表明,在Tween 80和柠檬酸均为10 g/L、p H=6、淋洗时间12 h时淋洗效果达到最佳,对Cu、Pb、Cd及PCBs的洗脱率分别达到98.77%、55.92%、66.82%和58.01%。因此,利用Tween80和柠檬酸组合可同时有效去除土壤重金属和PCBs,是复合污染土壤淋洗修复的有效淋洗剂。     

环境友好型淋洗剂对重金属污染土壤的修复效果

以广西某废弃铅锌冶炼企业重金属复合污染土壤为对象,采用土柱淋洗的方法,分别将自制的茶皂素、柠檬酸和EDTA 3种淋洗剂进行复合淋洗,并对复合淋洗的最佳配比、淋洗剂添加方式和淋洗时间进行研究,得到对环境友好且淋洗效果好的复合淋洗剂。最后,对淋洗前后土壤中Cu、Pb和Zn的赋存形态进行研究,探讨淋洗机理。研究结果表明,茶皂素和柠檬酸复合时对重金属Cu、Pb、Zn的去除率分别达到了77.00%、52.09%和58.66%,综合考虑淋洗效率以及经济环保等因素,选择将茶皂素和柠檬酸复合进行淋洗。复合淋洗实验结果表明,柠檬酸和茶皂素体积比为3∶1复合方式淋洗30 h,淋洗效果最佳,对重金属Cu、Pb和Zn的去除率分别达到82.77%、65.49%和78.12%。茶皂素和柠檬酸复合淋洗能有效的去除土壤中酸可提取态和有机结合态的重金属,氧化物结合态的Pb和Zn也有较大程度的降低,同时还发现,茶皂素和柠檬酸共同作用对残余态的Pb去除效果也较好,可达到50%以上。从茶籽饼中提取茶皂素与天然有机酸柠檬酸复合淋洗,用于修复污染面积小、污染浓度高且污染比较集中的重金属污染土壤,效果好且对环境友好。     

化学淋洗与生物质炭稳定化联合修复镉污染土壤

为探讨土壤淋洗与生物质炭稳定化联合修复技术对镉(Cd)污染黄棕壤修复效果的影响,研究通过振荡淋洗实验、BCR连续化学提取法和CaCl_2一次提取法,筛选确定污染土壤的最佳淋洗方案,并比较了淋洗修复、淋洗+稳定化修复技术对污染土壤中Cd生物有效性的影响。结果表明:3种淋洗剂的淋洗效率强弱顺序为EDTA-2NaHCl柠檬酸,最佳淋洗条件为0.12 mol·L~(-1)EDTA-2Na在固-液比1:4条件下振荡淋洗3 h,Cd的洗脱率为81.3%;淋洗后土壤中Cd的有效态(F1+F2)百分比减少了51.0%,显著降低了污染土壤的重金属总量及其环境风险;相比于单一淋洗修复技术,EDTA-2Na在添加体积(V_(添加))为最佳淋洗体积(V_(最优))的80%时,淋洗后再加入3%玉米秸秆炭稳定化15 d的联合修复技术能够将土壤中有效态Cd含量(CaCl_2-Cd)从8.13 mg·kg~(-1)降低到0.42 mg·kg~(-1)。因此,淋洗修复后施加玉米秸秆炭的联合修复技术,能够有效降低重金属污染土壤的生态环境风险,提高土壤环境质量。     

EDTA/纳米羟基磷灰石联合修复重金属污染土壤

土壤淋洗可能导致残留重金属活化,采用淋洗/钝化联合修复重金属污染土壤可在一定程度上减少这一影响。研究了EDTA淋洗、纳米羟基磷灰石钝化及两者联合修复对土壤重金属洗脱率、TCLP浸出浓度、化学形态分布的影响,构建了涵盖土壤重金属残留量、生物有效性和生理毒性的环境风险评价方法,对淋洗、钝化及其联合修复进行了评价。结果发现,EDTA淋洗对Pb和Cu的洗脱效果较好,对Zn浸出浓度的削减率较高。当EDTA投加量为2 g·L~(-1)时,Zn的浸出浓度降低了70.40%。纳米羟基磷灰石对Pb和Zn具有较好的钝化效果,对Cu和Cd的钝化作用相对较弱。当纳米羟基磷灰石投加量为2%时,Pb浸出浓度削减率高达89.65%。淋洗/钝化联合修复大幅度降低了Pb和Cd的浸出浓度,降低了可还原态Cu残留量、可还原态和残渣态Cd残留量,以及弱酸提取态和可还原态Zn、Pb残留量。当EDTA和纳米羟基磷灰石投加量分别为1 g·L~(-1)和1%时,土壤重金属总环境风险削减率达到74.12%。EDTA对土壤中Cu和Cd的洗脱效果较好,后续钝化修复作用有限,Pb和Zn则可通过淋洗/钝化联合修复大幅度提高削减环境风险削减率。     

Optimization of Height of Release of Air Pollutants

A number of key projects in the Environmental Protection Agency (EPA) particulate R&;D program having applicability to industry are presented. For electrostatic precipitators (ESP) there is presented the result of work on large diameter discharge electrodes which provide a decrease in penetration of up to a factor of 4 when compared to conventional small diameter electrodes. Also discussed is the multistage ESP which provides a collection efficiency that would require a collecting plate area 4 or 5 times larger with conventional ESP technology. The E-SOX technology makes use of the multistage concept to free up space in the ESP for SO₂ removals of up to 90%. Electrostatically augmented fabric filtration provides a reduction in pressure drop of about 5 0% as compared to conventional fabric filtration. Wind tunnel modeling of windbreaks for material storage piles indicates a potential for providing engineering design data that would allow significant emission reduction caused by wind erosion     

Investigation of the characteristics of the reflectivity of clouds

This paper investigates some of the reflectivity characteristics that clouds (when modelled as solid bodies) must exhibit to be compatible with observations that the reflecting surface of a cloud (i) appears almost equally bright across its face, (ii) is brightest when the cloud is opposite to the Sun but decreases in brightness as the cloud moves to other positions and (iii) increases in brightness with increasing optical thickness of the cloud in the observer's line of sight. These observations, respectively, are shown to imply that the peak value of the bidirectional total reflectivity from a cloud surface (i) increases in inverse proportion to the cosine of the angle between the Sun and the normal to the cloud surface, as the incident angle increases, (ii) appears to be directed back in the direction of the incident radiation, and (iii) increases as optical thickness of the cloud in the observer's line of sight increases. The results could have application in many fields (e.g. modelling diffuse radiance distributions for cloudy skies).     

Estimation of uncertainty of sampling for analysis of pesticide residues

Abstract

A computer model was used to take random samples from primary sample populations obtained from field trials to simulate the uncertainty of sampling for residue analysis of plant commodities and soil. The results indicate about 40%, 30% and 20% relative uncertainty when random samples of size 5, 10 and 25 are taken respectively, from a single lot. Therefore the sample size should be the same for establishing and enforcing legal limits.     

扬中生态环境建设的思考与实践

结合扬中生态环境的基本情况和存在的不足，进行了具体分析，对扬中未来生态建设的发展方向提出了建议及实施措施。     

实验室质量管理体系内部审核的实施

在实施ISO／IEC17025：1999标准《检测和校准实验室能力的通用要求》过程中，通过实验室质量管理体系内部审核的实践与系统分析，识别出内部审核实施阶段的关键环节，提出召开首次会议、收集审核证据、确定审核发现和召开末次会议的技术方法，对提高内部审核的质量和有效性、获得可靠的审核结论具有重要意义。     

次氯酸钠发生器的研制

介绍了电解法生产次氯酸钠的原理 ,并在原有生产工艺的基础上进行了重新设计和对设备的重新选择、改造 ,得出了各个工艺参数的最佳值 ,生产出高品质的次氯酸钠     

An application of the theory of kinematics of mixing to the study of tropospheric dispersion

The most common technique used for numerical simulations of tracer mixing is that of the numerical solution of the advection–diffusion equation with the unresolved fluxes parameterized using the similarity theory. Despite correct predictions of the overall directions of transport, models based on a numerical solution of the advection–diffusion equation lack sufficient accuracy to correctly reproduce the coupling of mixing with small scale processes which are sensitive to the microstructure of the tracer distribution. The objective of this paper is to revisit the basic formalism employed in numerical models used to investigate atmospheric tracers. The main mathematical method proposed here is the theory of kinematics of mixing which could be applied effectively for simulations of atmospheric transport processes. At the beginning of the paper, we introduce simple mathematical transformations in order to demonstrate how complex topological structures are created by mixing processes. These idealistic flow systems are essential to explain transport properties of much more complex three-dimensional geophysical flows. An example of the application of the kinematics of mixing to the analysis of tracer transport on a planetary scale is presented in the following sections. The complex filamentary structures simulated in the numerical experiment are evaluated using some commonly applied statistical measures in order to compare the results with the data published in the literature. The results of the experiment are also analysed with the help of simple conceptual models of fluid filaments. The microstructure of the tracer distribution introduced in the paper is essential to increase our understanding of atmospheric transport and to develop more realistic parameterizations of small-scale mixing. The presented results could also be used to improve calculations of the coupling between microphysical processes and tracer mixing.     

Impact of overexploitation of shellfish: northeastern coast of India

India has a very extensive coastline of about 7515 km, rich in diverse living resources. These resources continue to deteriorate with rampant harvesting or are altered for other uses such as aquaculture and fisheries. The present paper deals with degrading coastal habitats in northeastern India, and projects the intensity of the stress arising from the collection of tiger prawn seeds (Penaeus monodon) for aquacultural farms and molluskan shells for poultry feed and edible lime. Indiscriminate exploitation of these resources leads to a heavy reduction of the species concerned and other associated marine communities. The magnitude of such destruction has been quantified. The impacts of biodiversity loss and their after-effects on the ecobalance of this coastal system have become a matter of great concern to ecologists to maintain security and sustainability. The authors propose a public awareness program on themes relating to the importance of biodiversity for human livelihoods.     

Comparison of methods for evaluation of activity of photocatalytic films

Objective

This work aims to investigate the correlation between the photocatalytic activity determined by methylene blue bleaching (DIN 52980), stearic acid degradation, and degradation of acetone in gas phase.

Method

The photocatalytic TiO₂ coatings included in this investigation ranged from thin commercially available coatings (Activ^TM and BioClean^TM) and ready to use suspensions (Nano-X PK1245) to lab-produced PVD and sol?Cgel coatings. XRD analysis of the photocatalytic coatings showed that all the coatings consisted of nanocrystalline anatase, although the thickness and porosity varied considerably.

Results

The study showed that the reproducibility of the activity measurements was good. However, more importantly, the investigation showed that there is a good correlation between the activities determined by the different methods even though the characteristics of the photocatalytic coatings and the organic probe molecules varied considerably.

Conclusion

The overall findings of this work suggest that there is a good correlation between the investigated methods. These results are promising for the future work concerning standardization of methods for determination of the activity of photocatalytic films.