北京市某城市污水处理厂微生物气溶胶污染特性研究

以北京市某城市污水处理厂的格栅间、曝气池、污泥浓缩池和污泥脱水间为对象,研究不同功能区的空气微生物浓度、粒径分布及微生物组成.结果表明:(1)该污水处理厂4个功能区空气异养细菌浓度平均值为3.3×104cfu/m3,范围为1.0×102～4.3×105cfu/m3;真菌浓度平均值为6.1×103cfu/m3,范围为7.5×10～7.6×104cfu/m3.异养细菌和真菌浓度存在显著性差异,尤以曝气池上空最高,其次是污泥脱水间,浓度最低的区域为格栅间和污泥浓缩池.各功能区均存在不同程度的异养细菌和真菌污染.(2)该污水处理厂不同功能区逸散出的异养细菌分布比例最高的为第2～5级,真菌主要分布在第3～5级.4个功能区空气中粒径为2.10～4.70μm(第3、4级)的异养细菌和真菌粒子分别占到了总数的37％～40％和46％～56％,而粒径为0.65～2.10μm(第5、6级)的异养细菌和真菌粒子则分别占到了总数的30％～33％和31％～37％,说明该污水处理厂不同功能区内的空气微生物存在一定的健康风险,可能对人呼吸道构成感染威胁.(3)假单孢菌(Pseudomonas)为该污水处理厂不同功能区均检出的优势异养细菌,而优势真菌种属为毛霉(Mucor)和曲霉(Aspergillus).     

小型景观水体中病原微生物的分布特性

为了研究病原微生物在景观水体中的分布特性,采用定量PCR方法,监测了校园景观湖水中指示微生物(粪大肠菌群和大肠杆菌),病原性细菌(沙门氏菌和志贺氏菌)和病毒(肠道病毒、轮状病毒和诺如病毒)等典型肠道微生物的分布及变化情况.结果显示,粪大肠菌群未在景观水体中检出,而其他微生物均可检出,表明该水体未受到来自粪便源的污染,其他病原微生物来源于非粪便来源的面源污染.大肠杆菌、沙门氏菌和肠道病毒的检出率(>50%)比其他病原微生物的高;细菌和病毒的浓度分别分布在10-2~101 copies/mL和100~102 copies/mL.统计学分析结果表明,各病原微生物的浓度均服从对数正态分布,大肠杆菌与沙门氏菌和志贺氏菌无显著相关性.而肠道病毒与轮状病毒和诺如病毒在0.05置信水平上显著相关,相关系数分别为0.744和0.609.进一步分析病原微生物在景观水体中一年的变化,结果表明,随着降雨的汇入病原微生物的浓度明显增大,在高温和日光照射可致使病原微生物检出率和浓度明显降低.     

路面径流的大肠菌群污染及其雨水花园处理

调查了上海市区路面径流中大肠菌群的污染状况,分析了径流中大肠菌群含量的主要影响因素,采用雨水花园模拟柱,考察雨水花园对城市路面径流中大肠菌群的去除效果。结果表明,上海市区地面道路径流中总大肠菌群、粪大肠菌群的均值分别为2.28×106、9.48×105 cfu/100 mL,污染较严重,径流中大肠菌群含量与气温呈正相关;雨水花园对径流中大肠菌群具有良好的去除效果,不同模拟柱平均去除率范围在92.4%~99.5%。填料深度和水力停留时间是影响雨水花园对大肠菌群去除效果的主要因素。长期运行后,填料中没有大肠菌群的积累,雨水花园对大肠菌群的去除效果可保持长期稳定。     

城市污水处理厂污水处理系统中四环素类药物耐药菌的分布特性研究

采用微生物平板涂布法对2家城市污水处理厂污水处理各阶段的四环素类药物(四环素、金霉素、土霉素)耐药菌分布进行了测定,分析了污水处理的各阶段对四环素类药物耐药菌的去除效果。结果显示,2家污水处理厂污水处理系统中均能检出土霉素、四环素、金霉素耐药菌,数量分布均为土霉素耐药菌>四环素耐药菌>金霉素耐药菌。3种耐药菌的浓度均在加氯消毒出水中为最小(在0～103 cfu/mL),在外排污泥中最大(高于进水浓度,在105～107 cfu/mL)。四环素耐药菌数从进水的1.1×105～1.6×105 cfu/mL降为出水的0～5.5×102 cfu/mL,说明污水处理过程对四环素耐药菌有一定的去除效果,但四环素耐药菌占总菌数的百分比没有明显下降或上升,相比于进水的1.1%～3.4%,出水仍然保持在3.1%～4.3%左右,表明污水处理过程中没有选择性的富集或去除四环素耐药菌。     

近30年海南省农业面源潜在污染物时空特征分析

采用统计分析和地理信息系统(GIS)技术,分析了海南省农业面源污染的时序变化规律和空间分布特征。结果表明:(1)海南省化肥和农药施用量逐年增加,化肥施用强度由1985年的316.4kg/hm~2增加到2014年的1 019.5kg/hm~2;农药施用强度由1985年的6.1kg/hm~2增加到2014年的31.0kg/hm~2;畜禽粪便产生总量呈先增长后降低并趋于平稳的趋势,畜禽粪便排放强度由1985年的1.6×10~(4 )kg/hm~2下降到2014年的1.3×10~(4 )kg/hm~2。(2)海南省农业面源污染空间分异明显,2014年,化肥施用强度≥900kg/hm~2的严重风险市县达11个,农药施用强度≥28kg/hm~2的市县为3个。海南省畜禽粪便污染严重区域逐年减少,2014年,畜禽粪便排放强度只有定安和陵水为6.0×10~4~10.0×10~(4 )kg/hm~2的高风险区域,且在2014年琼中、琼海、白沙畜禽粪便排放强度首次为1.6×10~(4 )kg/hm~2的安全区域。     

山羊粪污颗粒静态好氧堆肥过程的生物强化

对山羊粪便颗粒进行了理化表征,发现其外表致密内芯多孔的结构特点,且其总体C/N比为25.69~27.88,适合直接堆肥,提出采用生物接种破坏表层,强化堆肥进程的思路.研究结果表明,生物接种可以大大强化堆肥过程中的生化反应进程,缩短堆肥发酵周期.产物中N、P含量随着生物接种量的增加而增大.当以VT-1000菌剂按10 mL/kg干物质接种时,堆体温度在2 d内就达到50℃,在高温期50~60℃维持7 d以上,其堆肥腐熟后物料TN、TP分别增加0.70%和1.59%,其C/N<15,更趋于稳定化,且最终产物中粪大肠菌群数<3个/g,未检验出蛔虫卵,实现了无害化处理.     

某采油区石油污染土壤微生物群落特征研究

采用Biolog方法、最大或然数和主成分分析方法研究了某采油区污染场地及周围土壤的污染特征、微生物数量、微生物群落功能多样性以及相互作用关系.结果表明,土壤均一定程度受到石油污染,污染场地土壤呈现以萜类、姥鲛烷及植烷等难降解物质为主的污染特征,其土壤中微生物数量最多,总活菌数为1.73×1010个/g,石油烃降解菌数为...     

三菌复合发酵提高厨余真蛋白含量的研究

为改善厨余发酵的品质,增加发酵后产品蛋白含量。采用三菌复合对厨余进行发酵,探讨了三菌复合的比例、接种量、发酵时间、初始pH值对发酵效果的影响,采用L9(34)正交实验对发酵条件进行优化,并对实验菌Lc和Ydy进行16S rRNA及18S rRNA分子鉴定。结果表明,最佳发酵条件为:菌剂配比(Lc∶Ydy∶S1)为3∶2∶1,接种量为0.15%,初始pH值为5.0,发酵时间为48 h。扩大实验结果表明,在最优发酵条件下,厨余经发酵后品质得到改善,真蛋白含量由发酵前的15.42%上升到发酵后的22.47%,增加率为45.80%;发酵后大肠菌群下降到30 cfu/g以下;乳酸菌及酵母菌数量分别为1.5×109 cfu/g和6.6×108 cfu/g。分子测序及鉴定结果表明,Lc为乳酸乳球菌,Ydy为热带假丝酵母菌。     

轻型汽油车颗粒物数浓度排放特征研究

应用全球统一轻型车排放测试循环(WLTC)工况对2种轻型汽油车(汽油直喷(GDI)车、进气道燃油喷射(PFI)车)进行尾气排放测试,分析其颗粒物数浓度(PN)、粒径分布及排放特征。结果表明:GDI测试车的PN平均排放因子为2.098×10~(13)～2.619×10~(13)个/km,远高于传统PFI测试车的7.486×10~(11)～3.174×10~(12)个/km。PFI测试车排放的PN 50%集中于粒径小于0.033μm的粒径段,GDI测试车排放的PN 50%集中于粒径小于0.010μm的粒径段。PFI测试车在40～80km/h的速度区间内,加速和减速状态下PN的排放速率高于匀速,GDI测试车在0～20、40～80km/h的速度区间内,加速状态下PN的排放速率高于匀速,在0～20km/h的速度区间内减速状态下PN的排放速率高于匀速。     

曝气对潜流人工湿地中木本植物的影响

为了增加人工湿地植物的多样性,本文将花叶冬青(Ilex aquifolium)、月季(Rosa chinensis)和八角金盘(Fatsia japonica)3种木本植物引入潜流人工湿地,比较曝气前后系统对污水处理效果,植物的生物量与对TN、TP负荷减少的贡献率,根系形态与内部结构、根际微生物与基质酶活性的比较研究。结果表明,木本植物潜流人工湿地系统曝气后可以提高COD、NH4+-N、TN、TP的去除率,分别为6.99%、4.91%、10.25%、8.09%。湿地曝气有利于3种木本植物的生长,在曝气后比曝气前生物量增加了381.75、606.25和896.88 g/m2。曝气会促使木本植物长出大量须根,且曝气后的根系具有大量由薄壁细胞组成的通气组织的水生根特征。同时,曝气后增加了硝化菌数量,各处理单元中硝化菌增量分别为A:0.28 MPN×104/g,B:4.23 MPN×104/g,C:7.7 MPN×104/g。另外,曝气后植物根际基质中磷酸酶和尿酶的含量增加量大约在50%以上,这与系统中N和P的去除率提高的规律一致。     

Optimization of Height of Release of Air Pollutants

A number of key projects in the Environmental Protection Agency (EPA) particulate R&;D program having applicability to industry are presented. For electrostatic precipitators (ESP) there is presented the result of work on large diameter discharge electrodes which provide a decrease in penetration of up to a factor of 4 when compared to conventional small diameter electrodes. Also discussed is the multistage ESP which provides a collection efficiency that would require a collecting plate area 4 or 5 times larger with conventional ESP technology. The E-SOX technology makes use of the multistage concept to free up space in the ESP for SO₂ removals of up to 90%. Electrostatically augmented fabric filtration provides a reduction in pressure drop of about 5 0% as compared to conventional fabric filtration. Wind tunnel modeling of windbreaks for material storage piles indicates a potential for providing engineering design data that would allow significant emission reduction caused by wind erosion     

Investigation of the characteristics of the reflectivity of clouds

This paper investigates some of the reflectivity characteristics that clouds (when modelled as solid bodies) must exhibit to be compatible with observations that the reflecting surface of a cloud (i) appears almost equally bright across its face, (ii) is brightest when the cloud is opposite to the Sun but decreases in brightness as the cloud moves to other positions and (iii) increases in brightness with increasing optical thickness of the cloud in the observer's line of sight. These observations, respectively, are shown to imply that the peak value of the bidirectional total reflectivity from a cloud surface (i) increases in inverse proportion to the cosine of the angle between the Sun and the normal to the cloud surface, as the incident angle increases, (ii) appears to be directed back in the direction of the incident radiation, and (iii) increases as optical thickness of the cloud in the observer's line of sight increases. The results could have application in many fields (e.g. modelling diffuse radiance distributions for cloudy skies).     

实验室质量管理体系内部审核的实施

在实施ISO／IEC17025：1999标准《检测和校准实验室能力的通用要求》过程中，通过实验室质量管理体系内部审核的实践与系统分析，识别出内部审核实施阶段的关键环节，提出召开首次会议、收集审核证据、确定审核发现和召开末次会议的技术方法，对提高内部审核的质量和有效性、获得可靠的审核结论具有重要意义。     

Estimation of uncertainty of sampling for analysis of pesticide residues

Abstract

A computer model was used to take random samples from primary sample populations obtained from field trials to simulate the uncertainty of sampling for residue analysis of plant commodities and soil. The results indicate about 40%, 30% and 20% relative uncertainty when random samples of size 5, 10 and 25 are taken respectively, from a single lot. Therefore the sample size should be the same for establishing and enforcing legal limits.     

扬中生态环境建设的思考与实践

结合扬中生态环境的基本情况和存在的不足，进行了具体分析，对扬中未来生态建设的发展方向提出了建议及实施措施。     

次氯酸钠发生器的研制

介绍了电解法生产次氯酸钠的原理 ,并在原有生产工艺的基础上进行了重新设计和对设备的重新选择、改造 ,得出了各个工艺参数的最佳值 ,生产出高品质的次氯酸钠     

An application of the theory of kinematics of mixing to the study of tropospheric dispersion

The most common technique used for numerical simulations of tracer mixing is that of the numerical solution of the advection–diffusion equation with the unresolved fluxes parameterized using the similarity theory. Despite correct predictions of the overall directions of transport, models based on a numerical solution of the advection–diffusion equation lack sufficient accuracy to correctly reproduce the coupling of mixing with small scale processes which are sensitive to the microstructure of the tracer distribution. The objective of this paper is to revisit the basic formalism employed in numerical models used to investigate atmospheric tracers. The main mathematical method proposed here is the theory of kinematics of mixing which could be applied effectively for simulations of atmospheric transport processes. At the beginning of the paper, we introduce simple mathematical transformations in order to demonstrate how complex topological structures are created by mixing processes. These idealistic flow systems are essential to explain transport properties of much more complex three-dimensional geophysical flows. An example of the application of the kinematics of mixing to the analysis of tracer transport on a planetary scale is presented in the following sections. The complex filamentary structures simulated in the numerical experiment are evaluated using some commonly applied statistical measures in order to compare the results with the data published in the literature. The results of the experiment are also analysed with the help of simple conceptual models of fluid filaments. The microstructure of the tracer distribution introduced in the paper is essential to increase our understanding of atmospheric transport and to develop more realistic parameterizations of small-scale mixing. The presented results could also be used to improve calculations of the coupling between microphysical processes and tracer mixing.     

实验室质量管理体系内部审核的策划

在实施ISO／IEC 17025：1999标准《检测和校准实验室能力的通用要求》过程中，通过实验室质量管理体系内部审核的实践与系统分析，识别出内部审核策划阶段的关键环节，提出审核范围确定、审核计划和抽样方案制订的质量控制要求，为有序高效地实施内部审核提供了技术方法。     

Characterization of products of ozonolysis of acrylonitrile in liquid phase

In order to elucidate the reaction mechanism of the ozonolysis of acrylonitrile in the liquid phase, characterization of reaction products has been attempted. One of the products, which was volatile, has been found to be formaldehyde by derivatizing with dimedone. The infrared and mass spectra of the derivative corresponded with that of alkylidene dimedone. Three other reaction products were isolated by TLC using silica gel, CHCl₃:MeOH (80:20). These have been tentatively identified as glyoxal, epoxide of acrylonitrile and acetamide from their mass spectra. Based on these findings a reaction pathway for the formation of formaldehyde is proposed to be that described by Criegee.