Assessing Mn, Fe, Cu, Zn, and Cd pollution in bottom sediments of Wadi Al-Arab Dam, Jordan

Thirty five bottom sediment samples were collected in a grid pattern from Wadi Al-Arab Dam. The present study focuses on the levels of Mn, Fe, Cu, Zn, Cd, total organic matter (TOM) and carbonate content (CO(3)(-2)) in order to assess the extent of environmental pollution and to discuss the origin of these contaminants in sediments of the dam. Concentration data were processed using correlation analysis and factor analysis. The results of correlation analysis and factor analysis show low positive and negative correlations among Mn, Fe, Cu, Zn, Cd, TOM, and CO(3)(-2) and indicate that heavy metals in sediments of Wadi Al-Arab have different anthropogenic and natural sources. The results also confirm the complicated behavior of these pollutants, that can be influenced by many factors. Sediments pollution assessment was carried out using enrichment factor and the geoaccumulation index. The calculation of enrichment factors showed that Mn and Cu are depleted by 0.76, and 1.33, respectively, whereas Cu, Zn, and Cd are enriched by 3.6, and 30, respectively. The results of geoaccumulation index reveal that sediments of Wadi Al-Arab are uncontaminated with Mn, Fe, and Cu, moderately contaminated with Zn, and strongly to extremely contaminated with Cd. Some of the elevated concentration of Zn and Cd are probably due to anthropogenic sources nearby the dam site. These sources mainly include fertilizers and pesticides used in agricultural activities, and the effluent of Irbid City treatment plant. Environmental risks of Cd and Zn were evaluated using the risk assessment code (RAC) and sequential extraction method. Zn poses a low environmental risk, whereas Cd poses a medium environmental risk.     

In vitro and in vivo approaches for the measurement of oral bioavailability of lead (Pb) in contaminated soils: a review

We reviewed the published evidence of lead (Pb) contamination of urban soils, soil Pb risk to children through hand-to-mouth activity, reduction of soil Pb bioavailability due to soil amendments, and methods to assess bioaccessibility which correlate with bioavailability of soil Pb. Feeding tests have shown that urban soils may have much lower Pb bioavailability than previously assumed. Hence bioavailability of soil Pb is the important measure for protection of public health, not total soil Pb. Chemical extraction tests (Pb bioaccessibility) have been developed which are well correlated with the results of bioavailability tests; application of these tests can save money and time compared with feeding tests. Recent findings have revealed that fractional bioaccessibility (bioaccessible compared to total) of Pb in urban soils is only 5-10% of total soil Pb, far lower than the 60% as bioavailable as food-Pb presumed by U.S.-EPA (30% absolute bioavailability used in IEUBK model).     

Environmental monitoring of PCDD/Fs and metals in the vicinity of a cement plant after using sewage sludge as a secondary fuel

In 2005, the partial substitution (20%) of fossil fuel by sewage sludge was tested in a Spanish cement plant. In order to establish the environmental impact for the surroundings, in 2006, the levels of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and heavy metals (As, Cd, Co, Cr, Cu, Hg, Mn, Ni, Pb, Sn, Tl, V, and Zn) were monitored in soil and vegetation samples collected near the cement plant. The temporal trends in the pollutant levels were studied by comparing the concentrations with those obtained in a previous survey (2003) in the same sampling sites. Very slight changes of the PCDD/F concentrations in both monitors were registered in the period 2003–2006 (0.17–0.15 and 0.94–1.10 ng I-TEQ kg⁻¹ dw in herbage and soil, respectively). In turn, there was a notable heterogeneity in the evolution of metal levels, which varied according to each particular element. Anyhow, the current levels of organic and inorganic pollutants are in the low part of the range in comparison with other zones impacted by cement plants, as well as industrial and urban areas worldwide. The human health risks derived from the exposure to PCDD/Fs and metals were also assessed. Although the cancer risks due to PCDD/Fs slightly increased, a reduction of the total carcinogenic risks, including metals, was noted. In conclusion, there were not observed impact changes for the environmental and the local population as a consequence of using sewage sludge as secondary fuel.     

Atmospheric heavy metal deposition accumulated in rural forest soils of southern Scandinavia

Thirty-three years of measurements of atmospheric heavy metal (HM) deposition (bulk precipitation) in Denmark combined with European emission inventories form the basis for calculating a 50-year accumulated atmospheric input to a remote forest plantation on the island of Laesoe. Soil samples taken in two depths, 0-10cm and 10-20cm, at eight forest sites at the island were used to determine the increase in HM content in the eolian deposited top soils of the plantation. Concentrations of lead (Pb), cadmium (Cd), copper (Cu), zinc (Zn), vanadium (V), nickel (Ni) and arsenic (As) were determined in atmospheric deposition and in soils. The accumulated atmospheric deposition is of the same magnitude as the increase of these metals in the top soil.     

Impact of soil organic matter on the distribution of polycyclic aromatic hydrocarbons (PAHs) in soils

The knowledge on the distribution of hydrophobic organic contaminants in soils can provide better understanding for their fate in the environment. In the present study, the n-butanol extraction and humic fractionation were applied to investigate the impact of SOM on the distribution of polycyclic aromatic hydrocarbons (PAHs). The results indicated that 80.5%-94.8% of the target PAHs could be extracted by n-butanol and 63.1%-94.6% of PAHs were associated with fulvic acid (FA). Concentrations of un-extracted PAHs increased significantly with the increasing soil organic matter (SOM), however, such an association was absent for the extractable fractions. The results suggested that the sequestration played a critical role in the accumulation of PAHs in soils. SOM also retarded the diffusion of PAHs into the humin fractions. It implied that sequestration in SOM was critical for PAH distribution in soils, while the properties of PAH compounds also had great influences.     

Arsenic distribution in soils and plants of an arsenic impacted former mining area

A mining area affected by the abandoned exploitation of an arsenical tungsten deposit was studied in order to assess its arsenic pollution level and the feasibility of native plants for being used in phytoremediation approaches. Soil and plant samples were collected at different distances from the polluting sources and analysed for their As content and distribution. Critical soil total concentrations of As were found, with values in the range 70-5330 mg kg⁻¹ in the uppermost layer. The plant community develops As tolerance by exclusion strategies. Of the plant species growing in the most polluted site, the shrubs Salix atrocinerea Brot. and Genista scorpius (L.) DC. exhibit the lowest bioaccumulation factor (BF) values for their aerial parts, suggesting their suitability to be used with revegetation purposes. The species Scirpus holoschoenus L. highlights for its important potential to stabilise As at root level, accumulating As contents up to 3164 mg kg⁻¹.     

Phthalate esters (PAEs): emerging organic contaminants in agricultural soils in peri-urban areas around Guangzhou, China

This study reports the first data on the concentrations and distribution of phthalate esters (PAEs) in the agricultural soils from the peri-urban areas of Guangzhou city. Σ₁₆PAEs concentrations ranged from 0.195 to 33.6 μg g⁻¹-dry weight (dw). Elevated levels of PAEs were recorded in the vegetable fields located next to the urban districts, and a decreasing trend exists following the distance away from the urban center. Diisobutyl phthalate (DiBP), Di-n-butyl phthalate (DnBP), and Di(2-ethylhexyl) phthalate (DEHP) dominated the PAEs in the agricultural soils. Significant relationship (correlation coefficient R² = 0.85, p < 0.01, n = 40) was present between the accumulation of PAEs and total organic carbons in agricultural soils. In addition, both pH and texture of soils are found to be important factors affecting the level of PAEs. This study shows that the agricultural soils in the peri-urban area of Guangzhou city were moderately polluted by PAEs.     

The use of hard- and soft-modelling to predict radiostrontium solid-liquid distribution coefficients in soils

The solid-liquid distribution coefficient (K_d) is the parameter that governs the incorporation of contaminants in soils. Its estimation allows the prediction of the fate of contaminants in the short- and long-term after a contamination event. Here, the K_d of radiostrontium (K_d(Sr)), a radionuclide of significant environmental interest, was predicted by hard models, which are based on knowledge of the mechanisms governing its sorption, and by soft models based on Partial Least Squares (PLS), using a large data set with the main soil parameters. The two approaches were tested and compared for 30 soils in Spain. Correlations between the predicted and experimental values of K_d(Sr) obtained using hard- and soft-modelling showed slopes close to 1 and regression coefficients higher than 0.95, which confirms that both approaches are able to obtain satisfactory estimates for K_d(Sr) from soil parameters.     

Polybrominated diphenyl ethers in soils of the modern Yellow River Delta, China: occurrence, distribution and inventory

The Yellow River is the second largest river in China. In this study, the levels of polybrominated diphenyl ethers (PBDEs) in the modern Yellow River Delta (mYRD) were firstly reported. Twenty PBDE congeners in soil/sediment samples from mYRD were measured. The total PBDE concentrations ranged from non-detectable to 18 257 ng kg⁻¹ with a mean value of 836 ng kg⁻¹. BDE-209 was the dominant congener, accounting for ∼86.1-99.5% of the total PBDEs. The congener profiles of PBDEs with higher abundances of BDE-153 and BDE-183 were similar to those in sediment of the Bohai Sea, indicating that they shared similar sources. The concentrations and congener patterns varied among different regions. Higher levels of PBDEs were found in the middle area (MA), and more complicated congener compositions were also observed in the MA, whereas lower levels of PBDEs were found in the modern course (MC) and the old course (OC). Much more PBDEs were detected in the top layer (TL) soil where more congeners were also held compared to lower soil layers, implying that more PBDEs were emitted into this area in recent years/decades. Organic matter controlled the PBDE distribution in the soil. Soil in this area might be a source of BDE209 for the Bohai Sea.     

Spatial distribution of heavy metal concentrations in urban, suburban and agricultural soils in a Mediterranean city of Algeria

As part of a larger program aiming at assessing transfer and effects of metals in food webs, this work studied the spatial distribution of Cd, Cr, Cu, Pb, and Zn in 101 sub-surface soils, systematically sampled (1 × 1 km regular grid) over a large area around Annaba, the fourth most-populated city of Algeria. Cd and Cr exhibited only one abnormally high value, with all other concentrations being close to pedogeological background. Some places in the centre of the city were polluted by Pb (up to 823 mg kg⁻¹), probably due to aerial deposition from gasoline exhausts. Zn never exceeded regulatory limits over the whole sampling area. Cu was the only element for which a spatial autocorrelation occurred. A spatial interpolation by cokriging allowed the identification of agricultural activities as the main Cu pollution source. Our approach revealed various anthropogenic pollution sources, more efficiently for large-scale patterns than for local abnormalities.     

Metals in particle-size fractions of the soils of five European cities

Soils from Aveiro, Glasgow, Ljubljana, Sevilla and Torino have been investigated in view of their potential for translocation of potentially toxic elements (PTE) to the atmosphere. Soils were partitioned into five size fractions and Cr, Cu, Ni, Pb and Zn were measured in the fractions and the whole soil. All PTE concentrated in the <10 microm fraction. Cr and Ni concentrated also in the coarse fraction, indicating a lithogenic contribution. An accumulation factor (AF) was calculated for the <2 and <10 microm fraction. The AF values indicate that the accumulation in the finer fractions is higher where the overall contamination is lower. AF for Cr and Ni are particularly low in Glasgow and Torino. An inverse relationship was found between the AF of some metals and the percentage of <10 microm particles that could be of use in risk assessment or remediation practices.     

Spatial and temporal distribution of solute leaching in heterogeneous soils: analysis and application to multisampler lysimeter data

Accurate assessment of the fate of salts, nutrients, and pollutants in natural, heterogeneous soils requires a proper quantification of both spatial and temporal solute spreading during solute movement. The number of experiments with multisampler devices that measure solute leaching as a function of space and time is increasing. The breakthrough curve (BTC) can characterize the temporal aspect of solute leaching, and recently the spatial solute distribution curve (SSDC) was introduced to describe the spatial solute distribution. We combined and extended both concepts to develop a tool for the comprehensive analysis of the full spatio-temporal behavior of solute leaching. The sampling locations are ranked in order of descending amount of total leaching (defined as the cumulative leaching from an individual compartment at the end of the experiment), thus collapsing both spatial axes of the sampling plane into one. The leaching process can then be described by a curved surface that is a function of the single spatial coordinate and time. This leaching surface is scaled to integrate to unity, and termed S can efficiently represent data from multisampler solute transport experiments or simulation results from multidimensional solute transport models. The mathematical relationships between the scaled leaching surface S, the BTC, and the SSDC are established. Any desired characteristic of the leaching process can be derived from S. The analysis was applied to a chloride leaching experiment on a lysimeter with 300 drainage compartments of 25 cm2 each. The sandy soil monolith in the lysimeter exhibited fingered flow in the water-repellent top layer. The observed S demonstrated the absence of a sharp separation between fingers and dry areas, owing to diverging flow in the wettable soil below the fingers. Times-to-peak, maximum solute fluxes, and total leaching varied more in high-leaching than in low-leaching compartments. This suggests a stochastic-convective transport process in the high-flow streamtubes, while convection dispersion is predominant in the low-flow areas. S can be viewed as a bivariate probability density function. Its marginal distributions are the BTC of all sampling locations combined, and the SSDC of cumulative solute leaching at the end of the experiment. The observed S cannot be represented by assuming complete independence between its marginal distributions, indicating that S contains information about the leaching process that cannot be derived from the combination of the BTC and the SSDC.     

Concentrations, sources and spatial distribution of polycyclic aromatic hydrocarbons in soils from Beijing, Tianjin and surrounding areas, North China

The concentrations, profiles, sources and spatial distribution of polycyclic aromatic hydrocarbons (PAHs) were determined in 40 surface soil samples collected from Beijing, Tianjin and surrounding areas, North China in 2007, and all sampling sites were far from industrial areas, roadsides and other pollution sources, and across a range of soil types in remote, rural villages and urban areas. The total concentrations of 16 PAHs ranged from 31.6 to 1475.0 ng/g, with an arithmetic average of 336.4 ng/g. The highest PAH concentrations were measured in urban soils, followed by rural village soils and soils from remote locations. The remote-rural village-urban PAH concentration gradient was related to population density, gross domestic product (GDP), long-range atmospheric transport and different types of land use. In addition, the PAH concentration was well correlated with the total organic carbon (TOC) concentration of the soil. The PAH profile suggested that coal combustion and biomass burning were primary PAH sources.     

Organochlorine pesticides in soils of Mexico and the potential for soil-air exchange

The spatial distribution of organochlorine pesticides (OCs) in soils and their potential for soil-air exchange was examined. The most prominent OCs were the DDTs (Geometric Mean, GM = 1.6 ng g⁻¹), endosulfans (0.16 ng g⁻¹), and toxaphenes (0.64 ng g⁻¹). DDTs in soils of southern Mexico showed fresher signatures with higher F_DDTe = p,p′-DDT/(p,p′-DDT + p,p′-DDE) and more racemic o,p′-DDT, while the signatures in the central and northern part of Mexico were more indicative of aged residues. Soil-air fugacity fractions showed that some soils are net recipients of DDTs from the atmosphere, while other soils are net sources. Toxaphene profiles in soils and air showed depletion of Parlar 39 and 42 which suggests that soil is the source to the atmosphere. Endosulfan was undergoing net deposition at most sites as it is a currently used pesticide. Other OCs showed wide variability in fugacity, suggesting a mix of net deposition and volatilization.     

Black carbon (BC) in urban and surrounding rural soils of Beijing, China: spatial distribution and relationship with polycyclic aromatic hydrocarbons (PAHs)

The concentrations of black carbon (BC), total organic carbon (TOC) and polycyclic aromatic hydrocarbons (PAHs) have been determined in soils from urban and rural areas of Beijing. The rural area can be divided into plain and mountainous areas which are close to and relatively far from the urban area, respectively. Concentration of BC (5.83 ± 3.05 mg g⁻¹) and BC/TOC concentration ratio (0.37 ± 0.15) in Beijing’s urban soil are high compared with that in world background soils and rural soils of Beijing, suggesting the urban environment to be an essential source and sink of BC. Concentration of BC in the urban area decreases from the inner city to exterior areas, which correlates with the urbanization history of Beijing and infers accumulation of BC in old urban soils. Black carbon in Beijing soils mainly comes from fossil fuel combustion, especially traffic emission. Median PAH concentration in the urban area (502 ng g⁻¹) is one order of magnitude higher than that in the rural plain (148 ng g⁻¹) and mountainous area (146 ng g⁻¹) where PAHs are supposed to mainly come from atmospheric deposition from the urban area. Concentrations of BC correlate significantly with those of PAHs (p < 0.01, except naphthalene) in the urban area and with those of heavier 4-, 5- and 6- ring PAHs (p < 0.01) in the adjacent rural plain area, while there is no significant correlation with any PAH in the farther rural mountainous area.     

Plant uptake and dissipation of PBDEs in the soils of electronic waste recycling sites

Plant uptake and dissipation of weathered PBDEs in the soils of e-waste recycling sites were investigated in a greenhouse study. Eighteen PBDE congeners (tri- through deca-) were detected in the plant tissues. The proportion of lower brominated PBDEs (mono- through hexa-) in plant roots was higher than that in the soils. A concentration gradient was observed of PBDEs in plants with the highest concentrations in the roots followed by the stems and lowest in the leaves. Reduction rates of the total PBDEs in the soils ranged from 13.3 to 21.7% after plant harvest and lower brominated PBDEs were associated with a higher tendency to dissipate than the higher brominated PBDEs. This study provides the first evidence for plant uptake of weathered PBDEs in the soils of e-waste recycling sites and planting contributes to the removal of PBDEs in e-waste contaminated soils.     

Biomonitors and the assessment of ecological impacts: distribution of herbivorous epifauna in contaminated macroalgal beds

We determined metal contents of co-occurring algae Padina crassa and Sargassum sp. in Port Jackson (Australia), and relationships between metal levels and the abundance of epifaunal amphipods. Copper, lead and zinc concentrations were amongst the highest yet recorded in these algae. Copper, manganese and lead concentrations were far greater in P. crassa than Sargassum sp., possibly due to the low growth of P. crassa in proximity to contaminated sediments. However, in manipulative experiments the proximity of algae to sediments did not explain these differences. The abundance of herbivorous amphipods correlated negatively with the copper content of P. crassa, but not with the lower concentrations in Sargassum sp. The greater contamination of P. crassa led to patchy distributions of metals in algal beds and recolonisation experiments showed Sargassum sp. acts as a refuge from contaminants for epifauna. The contamination of macroalgae may pose threats to epifauna in harbours around the world.     

Meteorological and pedological influence on the PCBs distribution in mountain soils

Polychlorinated biphenyls (PCBs) are a threat to environmental and human health due to their persistence and toxicological effects. In this paper, we analyse some meteorological and organic-matter-related effects on their distribution in the soils of an Alpine environment that is not subject to direct contamination. We collected samples and measured the contamination of 12 selected congeners from three soil layers (O, A1 and A2) and from North-, plain- and South-facing slopes on six different dates spanning the entire snowless portion of the year. We recorded the hourly air and soil temperatures, humidity and rainfall in the study period. We found evidence that PCBs contamination in soils varies significantly, depending on sampling date, layer and aspect. The observed seasonal trend shows an early summer peak and a rapid decrease during June. The layer effect demonstrates higher dry-weight-based concentrations in the O layer, whereas the differences are much smaller for SOM-based concentrations. Different factors caused significantly higher concentrations in northern soils, with a N/S enrichment factor ranging from 1.8 to 1.5 during the season. The southern site has significantly more rapid early-summer re-volatilisation kinetics (half-time of 16 d for South, 25 d for North).     

Spatial soil zinc content distribution from terrain parameters: A GIS-based decision-tree model in Lebanon

Heavy metal contamination has been and continues to be a worldwide phenomenon that has attracted a great deal of attention from governments and regulatory bodies. In this context, our study proposes a regression-tree model to predict the concentration level of zinc in the soils of northern Lebanon (as a case study of Mediterranean landscapes) under a GIS environment. The developed tree-model explained 88% of variance in zinc concentration using pH (100% in relative importance), surroundings of waste areas (90%), proximity to roads (80%), nearness to cities (50%), distance to drainage line (25%), lithology (24%), land cover/use (14%), slope gradient (10%), conductivity (7%), soil type (7%), organic matter (5%), and soil depth (5%). The overall accuracy of the quantitative zinc map produced (at 1:50.000 scale) was estimated to be 78%. The proposed tree model is relatively simple and may also be applied to other areas.