Knowledge mapping of planetary boundaries based on bibliometrics analysis

Environmental Science and Pollution Research - The planetary boundaries concept has triggered a vast amount of pure and applied scientific research, as well as policy and governance activities...     

An evaluation approach for livable urban environments

This study proposes a method for evaluating livable urban environments using the analytic hierarchy process, a survey of public opinions (n?=?1,075), and gray relational analysis with a pollutant standards index to estimate the weights of weather, air pollution, and environment aspects and each respective factor. This study investigates the positive or negative correlation of these factors and their effects on livable environment. A value of 100 was designated as the perfect living condition. Results show that the weights of weather, air pollution, and environment aspects were 0.288, 0.395, and 0.317, respectively. The weight ranges of three weather factors, five air pollution factors, and ten environmental factors were 0.311-0.358, 0.191-205, and 0.081-0.116, respectively. The monthly livable index of 28 districts in Taichung City and of 20 cities/counties in Taiwan ranged from 81.1 to 92.4 and from 83.1 to 90.8 in different months, respectively, showing that environmental aspect played a key role. These results demonstrate that the proposed method can provide a quantification index of living conditions in each region, thereby establishing the governmental improvement policy firmly. This study also presents a discussion on improvement strategies, especially on the apportionment rate of governmental construction funds for livable urban environments.     

A modelling approach to determine the origin of urban ground water

A simple modelling approach was developed to link patterns of urban land-use with ground water flow and chemistry in three dimensions and was applied to characterize the origin of recharge in the aquifer beneath the old industrial city of Nottingham, UK. The approach involved dividing land uses into types, and times into periods, and assigning the recharge from each an individual tracer-solute with a unit concentration. The computer code MT3DMS was used to track the multiple tracer-solutes in transient, three-dimensional simulations of the important urban aquifer. A depth-specific hydrochemical dataset collected in parallel supported the model predictions. At depth under the industrial area studied, a large component of ground water originated of older agricultural origin, with relatively low nitrate concentrations. Shallower ground water originated mainly from residential and industrial areas, with higher nitrate concentrations probably arising from leaking sewers and contaminated land. The results highlighted the spectrum of ground water from different origins that amalgamate even at short well screens in a non-pumped borehole and remind us that the non-point-source pollution of ground water from anthropogenic activities will involve more years of slow degradation of quality.     

粉煤灰资源化的一种有效途径

本文对影响粉煤灰泡沫玻璃质量的主要因素:玻璃软化温度与发泡剂的选择、发泡温度与发泡时间、发泡剂生成气体的温度、坯体成型压力等关键问题进行了探索,这些问题的探索对提高粉煤灰泡沫玻璃质量,获得性能优良的粉煤灰泡沫玻璃具有十分重要的意义。     

A hybrid modeling approach to resolve pollutant concentrations in an urban area

A modeling tool that can resolve contributions from individual sources to the urban environment is critical for air-toxics exposure assessments. Air toxics are often chemically reactive and may have background concentrations originated from distant sources. Grid models are the best-suited tools to handle the regional features of these chemicals. However, these models are not designed to resolve pollutant concentrations on local scales. Moreover, for many species of interest, having reaction time scales that are longer than the travel time across an urban area, chemical reactions can be ignored in describing local dispersion from strong individual sources making Lagrangian and plume-dispersion models practical. In this study, we test the feasibility of developing an urban hybrid simulation system. In this combination, the Community Multi-scale Air Quality model (CMAQ) provides the regional background concentrations and urban-scale photochemistry, and local models such as Hybrid Single Particle Lagrangian Integrated Trajectory model (HYSPLIT) and AMS/EPA Regulatory Model (AERMOD) provide the more spatially resolved concentrations due to local emission sources. In the initial application, the HYSPLIT, AERMOD, and CMAQ models are used in combination to calculate high-resolution benzene concentrations in the Houston area. The study period is from 18 August to 4 September of 2000. The Mesoscale Model 5 (MM5) is used to create meteorological fields with a horizontal resolution of 1×1 km². In another variation to this approach, multiple HYSPLIT simulations are used to create a concentration ensemble to estimate the contribution to the concentration variability from point sources. HYSPLIT simulations are used to model two sources of concentration variability; one due to variability created by different particle trajectory pathways in the turbulent atmosphere and the other due to different flow regimes that might be introduced when using gridded data to represent meteorological data fields. The ensemble mean concentrations determined by HYSPLIT plus the concentrations estimated by AERMOD are added to the CMAQ calculated background to estimate the total mean benzene concentration. These estimated hourly mean concentrations are also compared with available field measurements.     

An integrated approach to identify the origin of PM10 exceedances

Purpose

This study was aimed to the development of an integrated approach for the characterization of particulate matter (PM) pollution events in the South of Italy.

Methods

PM₁₀ and PM_2.5 daily samples were collected from June to November 2008 at an urban background site located in Bari (Puglia Region, South of Italy). Meteorological data, particle size distributions and atmospheric dispersion conditions were also monitored in order to provide information concerning the different features of PM sources.

Results

The collected data allowed suggesting four indicators to characterize different PM₁₀ exceedances. PM_2.5/PM₁₀ ratio, natural radioactivity, aerosol maps and back-trajectory analysis and particle distributions were considered in order to evaluate the contribution of local anthropogenic sources and to determine the different origins of intrusive air mass coming from long-range transport, such as African dust outbreaks and aerosol particles from Central and Eastern Europe. The obtained results were confirmed by applying principal component analysis to the number particle concentration dataset and by the chemical characterization of the samples (PM₁₀ and PM_2.5).

Conclusions

The integrated approach for PM study suggested in this paper can be useful to support the air quality managers for the development of cost-effective control strategies and the application of more suitable risk management approaches.     

An entitlement approach to the challenges of mangrove management in El Salvador

This paper summarizes those factors that have contributed to the degradation of the mangroves in El Salvador, and examines the implications of proposed changes in property rights to the mangroves for poor coastal communities. Current patterns of extraction and conversion in the mangrove ecosystem in El Salvador can be viewed through an entitlement lens that confers property right upon some actors, for certain uses, and denies them to others. Unfortunately, the present system of laws and regulations that governs resource use in the mangroves is contradictory and confusing. A number of laws currently are active that give entirely different directives about the use and transformation of the ecosystem. The rational and sustainable management of the mangroves cannot be secured without a redefinition of entitlement rights. This redefinition of entitlements, however, should take into account the needs of those whose livelihoods are intimately connected to the health of the ecosystem.     

An alternative approach to photochemical ozone creation potentials applied under European conditions

Photochemical ozone creation potential (POCP) values for 83 different volatile organic compounds (VOCs), including CO and CH4, were calculated under different environmental conditions representative for Europe. These calculations show that variations in POCP values are large between different types of chemical environments and that POCP values for VOCs should be presented as ranges instead of single values. POCP ranges are based on the extremes of the POCP values and are defined with the intention to include all POCP values an individual VOC will obtain in any European environment where O3 formation is of environmental concern. The POCP ranges indicate large differences in O3 production between individual VOCs, which justifies the use of this ranking scale instead of treating all VOCs as a homogeneous group of species in abatement strategies. Both the average O3 production over 96 hr and the maximum contribution to the O3 concentration were studied. The most efficient O3 producers were found to be isoprene, 2-methyl-2-butene, and acrolein. As a group, the alkenes are the most potent O3 producers, followed by higher alkanes and then the aromatics. The calculated values show a good agreement with previously calculated POCP values under northern European conditions.     

An integrated approach to understanding the sorption mechanism of phenanthrene by cork

Previous studies have shown the high sorption affinity of polycyclic aromatic hydrocarbons by cork. The aim of the present work is to go further by investigating the sorption mechanism of polycyclic aromatic hydrocarbons (exemplified by phenanthrene) on cork and the availability of the chemical components (i.e. lignin, suberin, holocellulose and extractives) to retain phenanthrene.Two approaches were integrated to reach this objective: (1) statistical multivariate analysis to obtain correlations between the sorption capacity, measured as K_oc, and the sorbent properties (i.e. polarity, acidic functional groups, %dichloromethane extractives, %ethanol and water extractives, %suberin, %lignin and %holocellulose) and (2) modeling calculations to obtain information on interaction at the molecular level.The statistical multivariate analysis demonstrated a strong and positive correlation between K_oc and the lignin content as well as negative correlations between K_oc and the phenolic groups and %dichloromethane extractives contents. The modeling study showed that the lignin–phenanthrene interaction is mostly hydrophobic in nature being largely determined by the π-stacking interaction between the aromatic groups of the interacting partners. This result justifies the observed correlations as dichloromethane extractives, being hydrophobic, compete with phenanthrene adsorption, whereas phenolic groups, as well as negatively charged groups, enhance the hydrophilic character of the sorbent surface, thus hindering the adsorption of phenanthrene.     

错流式生物滴滤床净化甲苯废气

采用焦化厂污泥为菌源驯化甲苯降解菌,接种错流式生物滴滤床,净化含甲苯废气。研究了生物滴滤床的挂膜启动和长期运行情况,填料和营养液对滴滤床去除能力的影响,并对长期运行的压降进行了观察分析。反应器挂膜启动需要6 d时间,稳定运行的平均去除效率为95％,单位体积最大去除负荷为251 g/(m³·h)。结果表明,采用错流式生物滴滤床可以有效去除甲苯废气;以比表面积大的生物陶粒作为填料以及定期适量更换营养液,均有助于提高生物滴滤床的去除能力;错流式生物滴滤床具有压降小、气液分布均匀的特点。     

基于均匀实验设计的曝气池柔性设计方法

为了解决污水处理过程由于水质水量等不确定性参数偏离设计值所引发的问题,提出了一种基于均匀实验设计的曝气池柔性设计方法。该方法用均匀设计产生不确定性参数区域内具有代表性的不确定性情形,用因子设计生成应对这些情形的操作方案,在柔性瓶颈处通过直观分析寻找改进设计方案的策略。从案例研究可以看出,传统的没有系统化地考虑不确定性参数变化的设计方法,所设计的曝气池在一些不确定性情形下,可能无法正常运行,而本方法有助于避免这一缺陷。     

The study of urban metabolism and its applications to urban planning and design

Following formative work in the 1970s, disappearance in the 1980s, and reemergence in the 1990s, a chronological review shows that the past decade has witnessed increasing interest in the study of urban metabolism. The review finds that there are two related, non-conflicting, schools of urban metabolism: one following Odum describes metabolism in terms of energy equivalents; while the second more broadly expresses a city's flows of water, materials and nutrients in terms of mass fluxes. Four example applications of urban metabolism studies are discussed: urban sustainability indicators; inputs to urban greenhouse gas emissions calculation; mathematical models of urban metabolism for policy analysis; and as a basis for sustainable urban design. Future directions include fuller integration of social, health and economic indicators into the urban metabolism framework, while tackling the great sustainability challenge of reconstructing cities.     

生物膜填料塔SO2废气净化性能研究

采用生物膜填料塔净化SO2废气,研究结果表明:当气体流量从100L/h增加到300L/h时,SO2净化效率由86.4%下降到73.2%;生化去除量随着入口SO2气体浓度的升高而增大;随着温度的升高,SO2净化效率和生化去除量都随之提高,且20℃以上时,净化效率可达90.9%以上,生化去除量可达75 mg/L·h以上,更利于微生物降解SO2.     

An approach to wastewater treatment in organised industrial districts: a pilot-scale example from Turkey

In this study, a detailed wastewater profile and treatability studies of Demirtas Organized Industrial District (OID) were undertaken on a pilot-scale. The industrial categorisation of Demirtas OID was determined, and the wastewater characterisations of each industrial sector were analysed and the flow-rates were measured. The results were used to design a wastewater treatment plant for Demirtas OID. Pilot-scale chemical and biological treatability studies were carried out. The steady-state performance of the pilot-scale treatment system in removing chemical oxygen demand (COD) and suspended solids (SS) was studied for a period of three months. The removal efficiencies obtained in this study were 42% of COD and 67% of SS in the chemical treatment, and 84% of COD and 25% of SS in the biological treatment. The overall removal efficiency of the pilot-scale system was 91% COD and 75% SS. The pilot-scale study showed that the wastewater from Demirtas OID could be treated with biological and chemical methods, and the treated wastewater met the Regulation of Discharge Standards of Turkey. The significance of this study is that it is the first such system in Turkey to be tested on a pilot scale.