Techno-economic assessment of municipal solid waste management in Jordan

Mismanagement of solid waste leads to public health risks, adverse environmental impacts and other socio-economic problems. This is obvious in many developing countries around the world. Currently, several countries have realized that the way they manage their solid wastes does not satisfy the objectives of sustainable development. Therefore, these countries, including Jordan, which forms the case study presented here, have decided to move away from traditional solid waste management (SWM) options to more integrated solid waste management approaches. Unfortunately, in many developing countries like Jordan, the lack of adequate resources to implement the necessary changes is posing a serious obstacle. The present paper discusses the various practices and challenges of solid waste management in Jordan from both a technical and economic perspective. An overview of the current practices and their environmental implications in three major cities of the country, which generate more than 70% of the country's solid waste, is presented. Recent literature on solid waste management in Jordan has been reviewed; and data on the total amount of municipal solid waste generated, compositional variations over the last two decades, and future projections are presented. The necessity, importance and needs of solid waste recovery and reuse are identified. The review of the legal frameworks indicated that there is a need for detailed and clear regulations dealing specifically with solid waste. The service cost analysis revealed that none of the municipalities in Jordan sufficiently recover the cost of the services, with more than 50% being subsidized from the municipalities' budgets. The allocation of the available resources was analyzed and service performance indicators assessed. Factors that should be taken into consideration when making the decision to move from a traditional SWM approach to a more integrated approach are highlighted and suggestions for a more smooth transition are recommended.     

Municipal solid waste management in Rasht City, Iran

Pollution and health risks generated by improper solid waste management are important issues concerning environmental management in developing countries. In most cities, the use of open dumps is common for the disposal of wastes, resulting in soil and water resource contamination by leachate in addition to odors and fires. Solid waste management infrastructure and services in developing countries are far from achieving basic standards in terms of hygiene and efficient collection and disposal. This paper presents an overview of current municipal solid waste management in Rasht city, Gilan Province, Iran, and provides recommendations for system improvement. The collected data of different MSW functional elements were based on data from questionnaires, visual observations of the authors, available reports and several interviews and meetings with responsible persons. Due to an increase in population and changes in lifestyle, the quantity and quality of MSW in Rasht city has changed. Lack of resources, infrastructure, suitable planning, leadership, and public awareness are the main challenges of MSW management of Rasht city. However, the present situation of solid waste management in this city, which generates more than 400tons/d, has been improved since the establishment of an organization responsible only for solid waste management. Source separation of wastes and construction of a composting plant are the two main activities of the Rasht Municipality in recent years.     

Medical waste management in Jordan: a study at the King Hussein Medical Center

As in many other developing countries, the generation of regulated medical waste (RMW) in Jordan has increased significantly over the last few decades. Despite the serious impacts of RMW on humans and the environment, only minor attention has been directed to its proper handling and disposal. This study was conducted in the form of a case study at one of Jordan's leading medical centers, namely, the King Hussein Medical Center (KHMC). Its purpose was to report on the current status of medical waste management at KHMC and propose possible measures to improve it. In general, it was found that the center's administration was reasonably aware of the importance of medical waste management and practiced some of the measures to adequately handle waste generated at the center. However, it was also found that significant voids were present that need to be addressed in the future including efficient segregation, the use of coded and colored bags, better handling and transfer means, and better monitoring and tracking techniques, as well as the need for training and awareness programs for the personnel.     

Hazardous healthcare waste management in the Kingdom of Bahrain

Hazardous healthcare waste has become an environmental concern for many developing countries including the Kingdom of Bahrain. There have been several significant obstacles facing the Kingdom in dealing with this issue including; limited documentation regarding generation, handling, management, and disposal of waste. This in turn hinders efforts to plan better healthcare waste management. In this paper, hazardous waste management status in the Kingdom has been investigated through an extensive survey carried out on selected public and private healthcare premises. Hazardous waste management practices including: waste generation, segregation, storage, collection, transportation, treatment, and disposal were determined. The results of this study along with key findings are discussed and summarized. In addition; several effective recommendations and improvements of hazardous waste management are suggested.     

Solid waste treatment opportunities in the Palestinian authority areas

Municipal services in the Palestinian Authority (PA) areas, including the West Bank and Gaza Strip (WBGS), are facing serious difficulties that have been intensified following the outbreak of the Palestinian uprising in late September 2000. The solid waste management services, being the most essential services provided by the municipalities and village councils, are mostly affected by the ongoing harsh situation and hence proper solutions that take into account the actual amount of generated municipal solid waste and its composition is a pre-requisite for planning proper treatment. Hence, a study was carried out to identify the actual status of solid waste in eight West Bank districts. A social survey was also conducted to collect information concerning the level of public awareness among communities surveyed to the perception of solid waste recycling and reuse. The results of the survey conducted in 2001–2002 were later reviewed during July–October 2008 to assess if the trend of domestic solid waste generation had changed. Based on the survey and post-assessment, it is found that political and economic conditions have both significantly impacted the trend of generated municipal solid waste and since no improvements in either condition are forthcoming, it is concluded that survey results could be used in a planning study. A possible handling of the generated wastes may entail transferring the recyclable waste to Israeli recycling industries, and in constructing three composting plants in different accessible locations in the West Bank.     

Household waste disposal in Mekelle city, Northern Ethiopia

In many cities of developing countries, such as Mekelle (Ethiopia), waste management is poor and solid wastes are dumped along roadsides and into open areas, endangering health and attracting vermin. The effects of demographic factors, economic and social status, waste and environmental attributes on household solid waste disposal are investigated using data from household survey. Household level data are then analyzed using multinomial logit estimation to determine the factors that affect household waste disposal decision making. Results show that demographic features such as age, education and household size have an insignificant impact over the choice of alternative waste disposal means, whereas the supply of waste facilities significantly affects waste disposal choice. Inadequate supply of waste containers and longer distance to these containers increase the probability of waste dumping in open areas and roadsides relative to the use of communal containers. Higher household income decreases the probability of using open areas and roadsides as waste destinations relative to communal containers. Measures to make the process of waste disposal less costly and ensuring well functioning institutional waste management would improve proper waste disposal.     

Assessment of solid waste generation and greenhouse gas emission potential in Yangon city,Myanmar

Due to booming economy, growing population and rapid urbanization, solid waste generation in the cities of developing countries has significantly increased. Yangon is the largest and most densely populated city, with over five million residents in Myanmar. Open dumping is the major waste disposal method and recycling sector remains at an early development stage. With increasing waste generation, current waste management activities in Yangon have significant environmental impacts. Therefore, the study developed two linear models to predict annual solid waste generation, regarding per capita waste generation, population growth scenarios, literacy rates and gross domestic products. The Intergovernmental Panel on Climate Change and Institute for Global Environmental Strategies calculation methods were used for greenhouse gas (GHG) emission prediction from recycling, waste transportation and final disposal sites (FDSs). As a result, the total annual waste generation and GHG emission in 2015 may double over the next decade. Two major FDSs, Htawe Chaung and Hteinpin, may contribute waste disposal of 272–797 kilotons per year and emit 177–518 Gg of CO₂-eq per year by 2025. The assessment of annual solid waste generation and GHG emission potential may offer advantages in assisting development of waste management plans in Yangon.     

Municipal solid waste management strategies in Turkey

Municipal solid waste (MSW) is a major environmental problem in Turkey, as in many developing countries. Problems associated with municipal solid waste are difficult to address, but efforts towards more efficient collection and transportation and environmentally acceptable waste disposal continue in Turkey. Although strict regulations on the management of solid waste are in place, primitive disposal methods such as open dumping and discharge into surface water have been used in various parts of Turkey. This study presents a brief history of the legislative trends in Turkey for MSW management. The study also presents the MSW responsibility and management structure together with the present situation of generation, composition, recycling, and treatment. The results show that approximately 25 million ton of MSW are generated annually in Turkey. About 77% of the population receives MSW services. In spite of efforts to change open dumping areas into sanitary landfills and to build modern recycling and composting facilities, Turkey still has over 2000 open dumps.     

Emerging trends in informal sector recycling in developing and transition countries

Optimistic estimates suggest that only 30–70% of waste generated in cities of developing countries is collected for disposal. As a result, uncollected waste is often disposed of into open dumps, along the streets or into water bodies. Quite often, this practice induces environmental degradation and public health risks. Notwithstanding, such practices also make waste materials readily available for itinerant waste pickers. These ‘scavengers’ as they are called, therefore perceive waste as a resource, for income generation. Literature suggests that Informal Sector Recycling (ISR) activity can bring other benefits such as, economic growth, litter control and resources conservation. This paper critically reviews trends in ISR activities in selected developing and transition countries. ISR often survives in very hostile social and physical environments largely because of negative Government and public attitude. Rather than being stigmatised, the sector should be recognised as an important element for achievement of sustainable waste management in developing countries. One solution to this problem could be the integration of ISR into the formal waste management system. To achieve ISR integration, this paper highlights six crucial aspects from literature: social acceptance, political will, mobilisation of cooperatives, partnerships with private enterprises, management and technical skills, as well as legal protection measures. It is important to note that not every country will have the wherewithal to achieve social inclusion and so the level of integration must be ‘flexible’. In addition, the structure of the ISR should not be based on a ‘universal’ model but should instead take into account local contexts and conditions.     

Overview of waste disposal and landfills/dumps in Asian countries

Many cities in developing Asian countries face serious problems in managing solid wastes. The annual waste generation increases in proportion to the rises in population and urbanization. Asian countries with greater rural populations produce more organic waste, such as kitchen wastes, and fewer recyclable items, such as paper, metals, and plastics. Reliable data on solid waste compositions are difficult to obtain, and even if available, they are often not updated. We report the most recent waste composition data in some developing Asian countries. We suggest that a better classification system for landfills is needed to address inconsistencies in data for sanitary landfill sites versus waste dumps. We also discuss the information on waste disposal trends and problems associated with general solid waste management in developing Asian countries.     

Integrated solid waste management based on the 3R approach

Integrated solid waste management (ISWM) based on the 3R approach (reduce, reuse, and recycle) is aimed at optimizing the management of solid waste from all the waste-generating sectors (municipal, construction and demolition, industrial, urban agriculture, and healthcare facilities) and involving all the stakeholders (waste generators, service providers, regulators, government, and community/neighborhoods). This article discusses the concept of solid waste management (SWM). Initially, SWM was aimed at reducing the risks to public health, and later the environmental aspect also became an important focus of SWM. Recently, another dimension is becoming a critical factor for SWM, i.e., resource conservation and resource recovery. Hence, the 3R approach is becoming a guiding factor for SWM. On the one hand, 3R helps to minimize the amount of waste from generation to disposal, thus managing the waste more effectively and minimizing the public health and environmental risks associated with it. On the other hand, resource recovery is maximized at all stages of SWM. Lately, the new concept of ISWM has been introduced to streamline all the stages of waste management, i.e., source separation, collection and transportation, transfer stations and material recovery, treatment and resource recovery, and final disposal. It was originally targeted at municipal solid waste management (MSWM), but now the United Nations Environment Programme (UNEP) is promoting this concept to cover all waste generating sectors to optimize the level of material and resource recovery for recycling as well as to improve the efficiency of waste management services. The ISWM concept is being transformed into ISWM systems to replace conventional SWM systems. This article further discusses the implementation process for ISWM. The process includes a baseline study on the characterization and quantification of waste for all waste generating sectors within a city, assessment of current waste management systems and practices, target setting for ISWM, identification of issues of concern and suggestions from stakeholders, development of a draft ISWM plan, preparation of an implementation strategy, and establishment of a monitoring and feedback system. UNEP is assisting member countries and their cities to develop an ISWM plan covering all the waste generating sectors within a specific geographical or administrative area such as a city or municipality. This umbrella approach is useful to generate sufficient volumes of recycling materials required to make recycling industries feasible. This is also helpful for efficient reallocation of resources for SWM such as collection vehicles, transfer stations, treatment plants, and disposal sites. UNEP is assisting cities to develop and implement ISWM based on the 3R approach. These experiences could be useful for other countries to develop and implement ISWM to achieve improved public health, better environmental protection, and resource conservation and resource recovery.     

A system dynamics approach for hospital waste management

Healthcare services provided by hospitals may generate some infectious wastes. Although a large percentage of hospital waste is classified as general waste, which has similar nature as that of municipal solid waste and, therefore, could be disposed in municipal landfills, a small portion of infectious waste has to be managed in the proper manner in order to minimize risk to public health. Many factors involved in the hospital waste management system often link to one another, which require a comprehensive analysis to determine the role of each factor in the system. In this paper, we present a hospital waste management model based on system dynamics to determine the interaction among factors in the system using a software package, Stella. A case study of the City of Jakarta, Indonesia is selected. The hospital waste generation is affected by various factors including the number of beds in the hospitals and the NIMBY (not in my back yard) syndrome. To minimize the risk to public health, we found that waste segregation, as well as infectious waste treatment prior to disposal, has to be conducted properly by the hospital management, especially when scavenging takes place in landfill sites in developing countries.     

Medical waste management in Trachea region of Turkey: suggested remedial action.

The main objective of this paper was to analyse the present status of medical waste management in the Trachea region of Turkey and subsequently to draw up a policy regarded with generation, collection, on-site handling, storage, processing, recycling, transportation and safe disposal of medical wastes. This paper also presents the results of study about awareness on how to handle expired drugs. Initially all health-care establishments in Tekirda?, Edirne and Kyrklareli provinces in Trachea region were identified and the amounts of hospital wastes generated by each of them were determined. Current medical waste-management practices, including storage, collection, transportation and disposal, in surveyed establishments were identified. Finally, according to results, remedial measurements for medical waste management in these establishments were suggested. Unfortunately, medical wastes are not given proper attention and these wastes are disposed of together with municipal and industrial solid wastes. The current disposal method is both a public health and environmental hazard. When landfill sites are visited, many scavengers can be seen sorting for recyclable materials, a practice which is dangerous for the scavengers. In addition, it was found that some staff in health-care establishments are unaware of the hazard of medical wastes. It is concluded that a new management system, which consists of segregation, material substitution, minimization, sanitary landfilling and alternative medical waste treatment methods should be carried out. For the best appropriate medical waste management system, health-care establishment employers, managers and especially the members of house- keeping divisions should be involved in medical waste management practice.     

Municipal solid waste management in Malaysia: Practices and challenges

Rapid economic development and population growth, inadequate infrastructure and expertise, and land scarcity make the management of municipal solid waste become one of Malaysia’s most critical environmental issues. The study is aimed at evaluating the generation, characteristics, and management of solid waste in Malaysia based on published information. In general, the per capita generation rate is about 0.5–0.8 kg/person/day in which domestic waste is the primary source. Currently, solid waste is managed by the Ministry of Housing and Local Government, with the participation of the private sector. A new institutional and legislation framework has been structured with the objectives to establish a holistic, integrated, and cost-effective solid waste management system, with an emphasis on environmental protection and public health. Therefore, the hierarchy of solid waste management has given the highest priority to source reduction through 3R, intermediate treatment and final disposal.     

Clinical solid waste management practices and its impact on human health and environment--A review

The management of clinical solid waste (CSW) continues to be a major challenge, particularly, in most healthcare facilities of the developing world. Poor conduct and inappropriate disposal methods exercised during handling and disposal of CSW is increasing significant health hazards and environmental pollution due to the infectious nature of the waste. This article summarises a literature review into existing CSW management practices in the healthcare centers. The information gathered in this paper has been derived from the desk study of open literature survey. Numerous researches have been conducted on the management of CSW. Although, significant steps have been taken on matters related to safe handling and disposal of the clinical waste, but improper management practice is evident from the point of initial collection to the final disposal. In most cases, the main reasons of the mismanagement of CSW are the lack of appropriate legislation, lack of specialized clinical staffs, lack of awareness and effective control. Furthermore, most of the healthcare centers of the developing world have faced financial difficulties and therefore looking for cost effective disposal methods of clinical waste. This paper emphasizes to continue the recycle-reuse program of CSW materials after sterilization by using supercritical fluid carbon dioxide (SF-CO2) sterilization technology at the point of initial collection. Emphasis is on the priority to inactivate the infectious micro-organisms in CSW. In that case, waste would not pose any threat to healthcare workers. The recycling-reuse program would be carried out successfully with the non-specialized clinical staffs. Therefore, the adoption of SF-CO2 sterilization technology in management of clinical solid waste can reduce exposure to infectious waste, decrease labor, lower costs, and yield better compliance with regulatory. Thus healthcare facilities can both save money and provide a safe environment for patients, healthcare staffs and clinical staffs.     

Solid waste collection and recycling in Nibong Tebal, Penang, Malaysia: a case study.

The implementation of a suitable solid waste management programme with appropriate methods of recycling as an inherent element is vital to the alleviation of the problems associated with solid waste generation, handling and disposal, environmental conservation, public hygiene, etc. The present work is a case study on solid waste collection and recycling practices in Nibong Tebal town, Penang, Malaysia. The amount and types of domestic waste generated, household participation in recycling, identification of existing problems related to the implementation of the recycling programme, etc. formed the basis of this study. Surveys (interviews/questionnaires) and on-site observations were conducted to gather information on the solid waste collection and recycling practice of the residents. A focus group of 60 individuals was selected and their response to a questionnaire, prepared according to a Likert scale, was obtained and analysed. The majority of the respondents expressed concerns about recycling and wanted more to be done in this regard. Illegal collection, aesthetically displeasing sites and a lack of public awareness were problems of major concern. Issues related to inadequate funding and manpower as well as end market are also addressed and suggestions made.     

Use of recycled plastic in concrete: a review

Numerous waste materials are generated from manufacturing processes, service industries and municipal solid wastes. The increasing awareness about the environment has tremendously contributed to the concerns related with disposal of the generated wastes. Solid waste management is one of the major environmental concerns in the world. With the scarcity of space for landfilling and due to its ever increasing cost, waste utilization has become an attractive alternative to disposal. Research is being carried out on the utilization of waste products in concrete. Such waste products include discarded tires, plastic, glass, steel, burnt foundry sand, and coal combustion by-products (CCBs). Each of these waste products has provided a specific effect on the properties of fresh and hardened concrete. The use of waste products in concrete not only makes it economical, but also helps in reducing disposal problems. Reuse of bulky wastes is considered the best environmental alternative for solving the problem of disposal. One such waste is plastic, which could be used in various applications. However, efforts have also been made to explore its use in concrete/asphalt concrete. The development of new construction materials using recycled plastics is important to both the construction and the plastic recycling industries. This paper presents a detailed review about waste and recycled plastics, waste management options, and research published on the effect of recycled plastic on the fresh and hardened properties of concrete. The effect of recycled and waste plastic on bulk density, air content, workability, compressive strength, splitting tensile strength, modulus of elasticity, impact resistance, permeability, and abrasion resistance is discussed in this paper.     

Report: citizen participation as a part of integrated solid waste management: Porto Alegre case.

This study presents the effects of citizen participation on integrated solid waste management. Porto Alegre was chosen as the area of study since its system is a good example for developing countries, based on the partnership between local government and the former scavengers' association that implements selective collection in the city. A life-cycle approach was used to estimate environmental loadings and economic costs based on solid waste generation, and a survey assessment tool was used to analyse social aspects. The results showed a decrease in environmental and economic impacts in the current situation, allowing Porto Alegre to have one of the most affordable integrated solid waste management systems in Brazil. The survey assessment pointed out that public campaign changed the perceptions and practices of most of Porto Alegre's citizens regarding solid waste management. On the other hand, it also pointed out that citizens need more education to increase their participation. Therefore, more research is needed to increase cooperation among all stakeholders, improve citizen participation, and consequently, further decrease the environmental impacts and economic costs.     

Alternative approaches for better municipal solid waste management in Mumbai, India

Waste is an unavoidable by product of human activities. Economic development, urbanization and improving living standards in cities, have led to an increase in the quantity and complexity of generated waste. Rapid growth of population and industrialization degrades the urban environment and places serious stress on natural resources, which undermines equitable and sustainable development. Inefficient management and disposal of solid waste is an obvious cause of degradation of the environment in most cities of the developing world. Municipal corporations of the developing countries are not able to handle increasing quantities of waste, which results in uncollected waste on roads and in other public places. There is a need to work towards a sustainable waste management system, which requires environmental, institutional, financial, economic and social sustainability. This study explores alternative approaches to municipal solid waste (MSW) management and estimates the cost of waste management in Mumbai, India. Two alternatives considered in the paper are community participation and public private partnership in waste management. Data for the present study are from various non-governmental organizations (NGOs) and from the private sector involved in waste management in Mumbai. Mathematical models are used to estimate the cost per ton of waste management for both of the alternatives, which are compared with the cost of waste management by Municipal Corporation of Greater Mumbai (MCGM). It is found that the cost per ton of waste management is Rs. 1518 (35 US dollars) with community participation; Rs. 1797 (41 US dollars) with public private partnership (PPP); and Rs. 1908 (44 US dollars) when only MCGM handles the waste. Hence, community participation in waste management is the least cost option and there is a strong case for comprehensively involving community participation in waste management.