A Laboratory Assessment of an Innovative Technology for the Detection of DNAPLs

A promising new technology for the detection of dense nonaqueous phase liquids, or DNAPLs, is cosolvent injection/extraction. Cosolvents, such as alcohols, are injected into the subsurface and interact with DNAPLs to increase their aqueous solubility, which increases recovery of the chemicals. A laboratory assessment was performed to determine if incorporating this technology with cone penetrometers could provide a useful sampling tool for DNAPL detection. A cone penetrometer was modeled in the laboratory by injecting and extracting small quantities of ethanol and propylene glycol at low concentrations into a homogeneous sand reactor contaminated with a residual saturation of tetrachloroethene (PCE). Experimental test results show that this technology is extremely sensitive to the vertical placement of the sampler, but is capable of enhancing PCE solubility while recovering most of the alcohol injected. Field testing of this technology will provide the next step in determining the feasibility of this technology for DNAPL detection.     

微波技术在环境保护领域的应用

综述了当前微波技术在环境保护领域的应用和研究状况，着重介绍了微波技术在废气处理，废水处理，固体废弃物处理，环境监测等方面的应用，讨论了应用存在的一些问题，并展望了微波技术在环境保护领域的应用前景。     

Hype or Hope: The Potential of Phytoremediation as an Emerging Green Technology

Phytoremediation is defined as the use of green plants and their associated microorganisms, soil amendments, and agronomic techniques to remove, contain, or render harmless environmental pollutants. At the present time, phytoremediation is an emerging technology and there is still a significant need to pursue both fundamental and applied research to fully exploit the metabolic and growth habits of higher plants. It is precisely the purpose of the European COST Action 837 to stimulate the development and evaluate the potential of plant biotechnology for the removal of organic pollutants and toxic metals from wastewater and contaminated sites. However, green plants grow under nonsterile conditions and thus strongly interact with many microorganisms, like bacteria and mycorrhizal fungi. In this context, an Inter‐COST Workshop on bioremediation was recently organized to address the significance of soil microorganisms for plants, and the importance of their interactions, with regard to their potential for phytoremediation. Based on the outcomes of this workshop, the potential use of phytoremediation is presented in this article. © 2001 John Wiley & Sons, Inc.     

现代化工分离技术在环境保护中的应用

介绍了高效导向筛板、新型高效填料、超临界流体萃取等现代化工分离技术及其在清洁生产和废物处理方面的应用。     

高梯度磁分离技术在环境保护中的应用

概述了近２０多年国内外高梯度磁分离技术在废水、废气、废渣处理及给水处理、燃煤脱硫等方面的研究进展,并展望了该技术在环保领域的应用前景。     

Resilience: A New Consideration for Environmental Remediation in an Era of Climate Change

There has been a growing movement within the environmental industry to develop more sustainable approaches in environmental remediation. These have generally included carbon footprint analysis, life cycle assessment, and best management practices to reduce the overall net environmental, social, and economic impacts of investigation and remediation activities. One of the foundational reasons net environmental impacts are currently evaluated is to identify and, subsequently, reduce contributions to climate change, primarily greenhouse gas emissions. While this trend toward sustainability and reduction in impact to the global environment is both important and admirable, the approach to remediation design and long‐term planning now needs to evolve further to better incorporate climate resilience into sustainable remediation design and implementation: designing remediation solutions that account for the projected impacts of climate change, as well as have the capacity to adapt to changing conditions. As a global population, we are now beyond the point of being able to prevent climate change and instead need to plan for adapting to it. In remediation, the effects of climate change create both risks and opportunities which should be considered during remedial design and long‐term planning. Responsible parties may see the push for—and management of—these considerations through their internal corporate risk management. The authors of this paper propose a simple framework for climate adaptation and resilience evaluations and plan development for remediation projects. ©2015 Wiley Periodicals, Inc.     

Environmental Technology Verification (ETV) test of dioxin emission monitors

The performance of four dioxin emission monitors, including two long-term sampling devices, the Dioxin-MonitoringSystem (DMS) and AMESA (the adsorption method for sampling dioxins and furans), and two semireal-time continuous monitors, the resonance ionization with multimirror photon accumulation time-of-flight mass spectrometer (RIMMPA-TOFMS) and the jet resonance-enhanced multiphoton ionization (jet-REMPI) system were tested. A package boiler burning a simulated chlorinated hazardous waste was used for a total of nine tests. Reference samples were collected during each test and analyzed for polychlorinated dibenzodioxins and dibenzofurans (PCDDs/Fs) using gas chromatography mass spectrometry. The PCDD/F concentrations of the reference samples measured by EPA Method 23 ranged from 0.9 to 6.0 ng toxic equivalence (TEQ)/dry standard cubic meter. The relative accuracies achieved by DMS, AMESA, and jet-REMPI varied from 22.6% to 78.2%, with 100% data completeness. The RIMMPA-TOFMS produced no quantifiable results due to various difficulties associated with the instrument during the testing. The two long-term samplers were easy to install and operate and provided a cumulative, averaged emission for the sampling period. The operations of the two semi-real-time continuous monitors were relatively complex, but one of them provided on-site, real-time data for PCDD/F emissions from measurement of a TEQ correlative indicator compound. This article summarizes results from the individual Environmental Technology Verification reports for the four dioxin monitors. This work was presented, in part, at the Fourth International Conference on Combustion, Incineration/Pyrolysis and Emission Control (i-CIPEC)     

Sodium Persulfate Oxidation for the Remediation of Chlorinated Solvents (USEPA Superfund Innovative Technology Evaluation Program)

This study has been conducted at the University of Connecticut (UCONN) in connection with the USEPA Superfund Innovative Technology Evaluation (SITE) program to evaluate a chemical oxidation technology (sodium persulfate) developed at UCONN. A protocol to assess the efficacy of oxidation technologies has been used. This protocol, which consists of obtaining data from a treatability study, tested two in-situ chemical oxidation technologies that can be used on soil and groundwater at a site in Vernon, Connecticut. Based on the treatability report results and additional field data collected at the site, the design for the field implementation of the chemical oxidation remediation was completed. The results indicate that both sodium persulfate and potassium permanganate were able to effectively degrade the target VOCs (i.e., PCE, TCE and cis-DCE) in groundwater and soil-groundwater matrices. In the sodium persulfate tests (120 hrs), the extent of destruction of target VOCs was 74% for PCE, 86% for TCE and 84% for cis-DCE by Na₂S₂O₈ alone and 68% for PCE, 76% for TCE, and 69% for cis-DCE by Fe(II)-catalyzed Na₂S₂O₈. The results demonstrate the sodium persulfate's ability to degrade PCE, TCE and cis-DCE. It is expected that given sufficient dose and treatment time, a higher destruction rate of the dissolved phase contamination can be achieved. The data also indicates that the catalytic effect of the iron chelate on persulfate chemistry was much less pronounced in the soil-groundwater matrix. This indicates an interaction between the iron chelate solution and the soil, which may have resulted in a lower availability of the chelated iron for catalysis. The study showed that the remediation of the VOCs-contaminated soil and groundwater by in-situ chemical oxidation using sodium persulfate is feasible at the Roosevelt Mills site. As a result, the USEPA SITE program will evaluate this technology at this site.     

Innovative applications of subgrade biogeochemical reactors: Three case studies

Subgrade biogeochemical reactors (SBGRs) are an in situ remediation technology shown to be effective in treating contaminant source areas and groundwater hot spots, while being sustainable and economical. This technology has been applied for over a decade to treat chlorinated volatile organic compound source areas where groundwater is shallow (e.g., less than approximately 30 feet below ground surface [ft bgs]). However, this article provides three case studies describing innovative SBGR configurations recently developed and tested that are outside of this norm, which enable use of this technology under more challenging site conditions or for treatment of alternative contaminant classes. The first SBGR case study addresses a site with groundwater deeper than 30 ft bgs and limited space for construction, where an SBGR column configuration reduced the maximum trichloroethene (TCE) groundwater concentration from 9,900 micrograms per liter (μg/L) to <1 μg/L (nondetect) within approximately 15 months. The second SBGR is a recirculating trench configuration that is supporting remediation of a 5.7‐acre TCE plume, which has significant surface footprint constraints due to the presence of endangered species habitat. The third SBGR was constructed with a new amendment mixture and reduced groundwater contaminant concentrations in a petroleum hydrocarbon source area by over 97% within approximately 1 year. Additionally, a summary is provided for new SBGR configurations that are planned for treatment of additional classes of contaminants (e.g., hexavalent chromium, 1,4‐dioxane, dissolved explosives constituents, etc.). A discussion is also provided describing research being conducted to further understand and optimize treatment mechanisms within SBGRs, including a recently developed sampling approach called the aquifer matrix probe.     

The Role of Time in Environmental Risk Assessment

Environmental risk assessment is generally based on the comparison of the exposure concentration of a chemical with the sensitivity of the ecosystems for this chemical. The exposure to this chemical is often assumed to be constant and continuous, while in reality exposure is more likely to be variable and/or intermittent. Several approaches have been developed to account for the influence of exposure time on environmental effects. Time-to-event modelling is the most recent approach to include time in environmental risk assessment. This approach is applied in the DREAM model (Dose Related Effects Assessment Model), which is used to assess the environmental impact of produced water discharges in the marine environment.     

Sugarcane vinasse: Environmental implications of its use

The inadequate and indiscriminate disposal of sugarcane vinasse in soils and water bodies has received much attention since decades ago, due to environmental problems associated to this practice. Vinasse is the final by-product of the biomass distillation, mainly for the production of ethanol, from sugar crops (beet and sugarcane), starch crops (corn, wheat, rice, and cassava), or cellulosic material (harvesting crop residues, sugarcane bagasse, and wood). Because of the large quantities of vinasse produced, alternative treatments and uses have been developed, such as recycling of vinasse in fermentation, fertirrigation, concentration by evaporation, and yeast and energy production. This review was aimed at examining the available data on the subject as a contribution to update the information on sugarcane vinasse, from its characteristics and chemical composition to alternatives uses in Brazil: fertirrigation, concentration by evaporation, energy production; the effects on soil physical, chemical and biological properties; its influence on seed germination, its use as biostimulant and environmental contaminant. The low pH, electric conductivity, and chemical elements present in sugarcane vinasse may cause changes in the chemical and physical–chemical properties of soils, rivers, and lakes with frequent discharges over a long period of time, and also have adverse effects on agricultural soils and biota in general. Thus, new studies and green methods need to be developed aiming at sugarcane vinasse recycling and disposal.     

Environmental Relevance of CL-20: Preliminary Findings

CL-20 is a recently synthesized component of energetic propellant formulations. Although energetic aspects of CL-20 have attracted considerable attention, its environmental behavior is unknown. A multi-disciplinary study covering a variety of fate, transport, and toxicity issues of CL-20 is currently under way in the Center for Environmental Engineering at Stevens Institute of Technology. Preliminary results on water solubility, biodegradability, hydrolytic reactivity, thermal decomposition and soil microbial and plant toxicity are reported in this article.     

试论清洁生产对环境标准体系的影响

探讨了推行清洁生产对环境标准体系的影响，认为我国在工业污染防治战略由“末端治理”转向“生产全过程控制”的过程中，环境标准体系的建立必须与先进的生产工艺、企业的经济效益、企业的环境管理、产品的环境指标、商品流通领域的环境标志相结合，才能适合环境管理的需要。     

The Use of Natural Systems to Remediate Groundwater: Department of Energy Experience at the Savannah River Site

Natural remediation is moving toward the forefront as engineers clean groundwater at the Savannah River Site (SRS), a major Department of Energy (DOE) installation near Aiken, South Carolina. This article reviews two successful, innovative remediation methods currently being deployed: biosparging to treat chlorinated solvents and phytoremediation to address tritium in groundwater. The biosparging system reintroduces oxygen into the groundwater and injects nutrient compounds for in‐situ remediation. The system has greatly reduced the concentrations of trichloroethylene (TCE) and vinyl chloride in wells downgradient from a sanitary landfill (SLF). Phytoremediation is an emerging technology that promises effective and inexpensive cleanup of certain hazardous wastes. Using natural processes, plants can break down, trap and hold, or transpire contaminants. This article discusses the use of phytoremediation to reduce the discharge of tritium to an on‐site stream at SRS. © 2002 Wiley Periodicals Inc. *     

Environmental impacts of new Coronavirus outbreak in Iran with an emphasis on waste management sector

Journal of Material Cycles and Waste Management - The COVID-19 pandemic have brought several environmental problems worldwide, among which management of municipal solid wastes (MSW) is of great...     

Assessment of Ecological Integrity from Environmental Variables in an Impacted Oligotrophic,Alpine Lake: Whole Lake Approach Using 3d-Spatial Heterogeneity

The ecological integrity of a lake as a whole can only beassessed through an adequate sampling strategy. Spatialheterogeneity of phytoplankton as well as vertical andhorizontal variability of physical and chemical variables wereestimated from 57 stations at four seasons differing in theirhydrological regime. Resolution of grid positions, located byGPS, was 250 m near the impact site, 500 m for the southernpart of the lake, and 1000 m in the northern part. Data areanalysed by conventional gridding methods as well as in threedimensions with a novel GIS-technique. Horizontal large scaledifferences in several variables are associated withhydrological situations. Local variability in the southern baywas due to input of industrial tailings at times. Spatialvariation of phytoplankton biomass estimated as chlorophyll-aand relevant associated environmental variables were analysedusing a graphical multimetric approach. With this technique,the directly impacted area can be evaluated relative to theremaining part of the lake. The lake is then compared with tworeference lakes, one within the same catchement, the other ina different water-shed. An index of ecological integrity wasdeveloped describing multimetric intra- and interspecific lakevariability. The final index was used to describe the statusof lake water quality relative to a `undisturbed' referencelake. Results showed that Traunsee is ecologically intactalthough its chemistry differs substantially from an`external' reference.     

Environmental legislative accomplishments: The 104th congress in review and a look at what's ahead

Contrary to many's expectations, the Republican-led 104th Congress passed a substantial amount of environmental legislation. In addition to a variety of bills that received limited public attention, two major environmental laws—the Safe Drinking Water Act Amendments and the Food Quality Protection Act—were passed and signed into law. Still, many important legislative efforts were left unfinished at the end of the second session and will resurface in the 105th Congress. This article discusses the environmental legislation that passed in the 104th Congress and explores what environmental legislative initiatives will be addressed in the 105th Congress. (While not intended to be all-inclusive, the article mentions most major environmental legislation, with a particular focus on waste issues.)     

欧洲联盟环境标准体系及其分析

介绍了欧洲联盟环境标准体系的构成、环境标准的立法程序、法律效力、特点及实施要求,并对中国环境标准的制定与实施提出了建议。     

Environmental assessment and remediation: Estimating the costs of uncertainty

Current cost estimates for the assessment and remediation of environmental contamination at facilities operated by the U.S. Department of Energy (DOE) are based largely on assumptions, with a resulting high level of uncertainty. Therefore, consistent and reliable methods for estimating the uncertainty inherent in the estimates are of vital importance. This article presents an approach and format for estimating contingency in DOE's Environmental Restoration Program. The method involves an analysis of risk factors having a potential to affect the cost of the major elements in the estimate. Application of the contingency analysis to a project site is included in the discussion.