Simulation of aerosol direct radiative forcing with RAMS-CMAQ in East Asia

The air quality modeling system RAMS-CMAQ is developed to assess aerosol direct radiative forcing by linking simulated meteorological parameters and aerosol mass concentration with the aerosol optical properties/radiative transfer module in this study. The module is capable of accounting for important factors that affect aerosol optical properties and radiative effect, such as incident wave length, aerosol size distribution, water uptake, and internal mixture. Subsequently, the modeling system is applied to simulate the temporal and spatial variations in mass burden, optical properties, and direct radiative forcing of diverse aerosols, including sulfate, nitrate, ammonium, black carbon, organic carbon, dust, and sea salt over East Asia throughout 2005. Model performance is fully evaluated using various observational data, including satellite monitoring of MODIS and surface measurements of EANET (Acid Deposition Monitoring Network), AERONET (Aerosol Robotic Network), and CSHNET (Chinese Sun Hazemeter Network). The correlation coefficients of the comparisons of daily average mass concentrations of sulfate, PM2.5, and PM10 between simulations and EANET measurements are 0.70, 0.61, and 0.64, respectively. It is also determined that the modeled aerosol optical depth (AOD) is in congruence with the observed results from the AERONET, the CSHNET, and the MODIS. The model results suggest that the high AOD values ranging from 0.8 to 1.2 are mainly distributed over the Sichuan Basin as well as over central and southeastern China, in East Asia. The aerosol direct radiative forcing patterns generally followed the AOD patterns. The strongest forcing effect ranging from −12 to −8 W m⁻² was mainly distributed over the Sichuan Basin and the eastern China’s coastal regions in the all-sky case at TOA, and the forcing effect ranging from −8 to −4 W m⁻² could be found over entire eastern China, Korea, Japan, East China Sea, and the sea areas of Japan     

Sensitivity of shortwave radiative fluxes to the vertical distribution of aerosol single scattering albedo in the presence of a desert dust layer

The aim of this work is to quantify the sensitivity of shortwave radiative fluxes to changes in the vertical distribution of aerosol absorption, taken into account through the aerosol Single Scattering Albedo (SSA). The case study represents a real atmospheric situation with a desert dust layer (DDL) in the mid troposphere over an urban Boundary Layer (BL) observed at Rome on 20 June 2007. A moderately high aerosol optical depth (AOD), 0.292 at 550 nm, and low Ångström exponent of 0.30 were measured. The observed case was reconstructed with a radiative transfer model, in which the SSA of the boundary layer aerosols was varied from that of a highly absorbing aerosol type (urban) to a highly scattering one (clear marine). The SSA of the DDL is determined keeping fixed the measured SSA of the whole atmospheric column. The simulations show notable changes in the surface and top of the atmosphere (TOA) diffuse fluxes depending on the boundary layer aerosol properties. The aerosol radiative forcing (ARF) at the surface changes by 6–19 W m^?2, depending on the solar zenith angle, when urban or clean marine particles are included in the boundary layer. The ARF differences observed at TOA are between 1 and 5 W m^?2 when urban and clean marine aerosol types in the BL are respectively used, showing a smaller dependency on the solar zenith angle than at the surface.     

On the contribution of black carbon to the composite aerosol radiative forcing over an urban environment

This paper discusses the extent of Black Carbon (BC) radiative forcing in the total aerosol atmospheric radiative forcing over Pune, an urban site in India. Collocated measurements of aerosol optical properties, chemical composition and BC were carried out for a period of six months (during October 2004 to May 2005) over the site. Observed aerosol chemical composition in terms of water soluble, insoluble and BC components were used in Optical Properties of Aerosols and Clouds (OPAC) to derive aerosol optical properties of composite aerosols. The BC fraction alone was used in OPAC to derive optical properties of BC aerosols. The aerosol optical properties for composite and BC aerosols were separately used in SBDART model to derive direct aerosol radiative forcing due to composite and BC aerosols. The atmospheric radiative forcing for composite aerosols were found to be +35.5, +32.9 and +47.6 Wm^?2 during post-monsoon, winter and pre-monsoon seasons, respectively. The average BC mass fraction found to be 4.83, 6.33 and 4 μg m^?3 during the above seasons contributing around 2.2 to 5.8% to the total aerosol load. The atmospheric radiative forcing estimated due to BC aerosols was +18.8, +23.4 and +17.2 Wm^?2, respectively during the above seasons. The study suggests that even though BC contributes only 2.2–6% to the total aerosol load; it is contributing an average of around 55% to the total lower atmospheric aerosol forcing due to strong radiative absorption, and thus enhancing greenhouse warming.     

Sulfate aerosols forcing: An estimate using a three-dimensional interactive chemistry scheme

The tropospheric sulfate radiative forcing has been calculated using an interactive chemistry scheme in LMD-GCM. To estimate the radiative forcing of sulfate aerosol on climate, a consistent interaction between atmospheric circulation and radiation computation has been allowed in LMD-GCM. The model results indicate that the change in the sulfate aerosols number concentration is negatively correlated to the indirect radiative forcing. The model simulated annual mean direct radiative forcing ranges from −0.1 to −1.2 W m⁻², and indirect forcing ranges from −0.4 to −1.6 W m⁻². The global annual mean direct effect estimated by the model is −0.48 W m⁻², and that of indirect is −0.68 W m⁻².     

Elemental carbon and sulfate aerosols over a rural mountain site in the northeastern United States: Regional emissions and implications for climate change

The effect of elemental carbon (EC) on global as well as regional climate forcing is potentially very important. However, the EC data for northeastern U.S. is sparse. Daily EC concentrations, [EC], and [SO₄] were measured in the northeastern U.S. at a regionally representative rural site, Whiteface Mountain (WFM; 44.366°N, 73.903°W, 1.5 km amsl, above mean sea level), New York (NY), for 1997. The air mass origin was determined using 6-h backward in time air trajectories obtained from the Hybrid Single-Particle Lagrangian Integrated Trajectory Model (HYSPLIT 4). [EC] and [SO₄] were highly variable and influenced by synoptic–scale meteorology (rainy vs dry periods). The maximum daily [EC] and [SO₄] were 364 ± 55 and 28,800 ± 3000 ng m^?3, respectively. [EC] and [SO₄] also showed seasonal variations at WFM. Occurrences of high daily [EC] were mainly in spring months, while peak daily [SO₄] concentrations occurred in summer months. This behavior of aerosols is due to the fact that the sources of EC and SO₄ are not the same and also due to the enhanced photochemical activity during summer months that increased the production of SO₄ from SO₂. High [EC] and [SO₄] values were associated with westerly air flow from the industrialized Midwestern U.S. Sector analysis using HYSPLIT 4 air trajectories showed that regions lying between the southwest and northwest of the WFM contributed 81% and 83% of the [EC] and [SO₄], respectively. The monthly net direct radiative forcing for shortwave (SW) due to EC and SO₄ aerosols at the top of the atmosphere (TOA) varied from ?0.05 to ?0.50 W m^?2, with an annual average of ?0.20 ± 0.15 W m^?2 that gives a net cooling effect. Average net radiative forcing at WFM for clear sky is lower than the global average radiative forcing reported by IPCC (Foster and Ramaswamy, 2007).     

Direct radiative forcing and atmospheric absorption by boundary layer aerosols in the southeastern US: model estimates on the basis of new observations

In an effort to reduce uncertainties in the quantification of aerosol direct radiative forcing (ADRF) in the southeastern United States (US), a field column experiment was conducted to measure aerosol radiative properties and effects at Mt. Mitchell, North Carolina, and at an adjacent valley site. The experimental period was from June 1995 to mid-December 1995. The aerosol optical properties (single scattering albedo and asymmetry factor) needed to compute ADRF were obtained on the basis of a procedure involving a Mie code and a radiative transfer code in conjunction with the retrieved aerosol size distribution, aerosol optical depth, and diffuse-to-direct solar irradiance ratio. The regional values of ADRF at the surface and top of atmosphere (TOA), and atmospheric aerosol absorption are derived using the obtained aerosol optical properties as inputs to the column radiation model (CRM) of the community climate model (CCM3). The cloud-free instantaneous TOA ADRFs for highly polluted (HP), marine (M) and continental (C) air masses range from 20.3 to −24.8, 1.3 to −10.4, and 1.9 to −13.4 W m⁻², respectively. The mean cloud-free 24-h ADRFs at the TOA (at the surface) for HP, M, and C air masses are estimated to be −8±4 (−33±16), −7±4 (−13±8), and −0.14±0.05 (−8±3) W m⁻², respectively. On the assumption that the fractional coverage of clouds is 0.61, the annual mean ADRFs at the TOA and the surface are −2±1, and −7±2 W m⁻², respectively. This also implies that aerosols currently heat the atmosphere over the southeastern US by 5±3 W m⁻² on annual timescales due to the aerosol absorption in the troposphere.     

Aerosol optical,chemical and physical properties at Gosan,Korea during Asian dust and pollution episodes in 2001

In order to understand the influence of dust and anthropogenic pollution aerosols on regional climate in East Asia, we analyzed the aerosol optical, chemical and physical properties for two cases with high aerosol loading and assessed the radiative forcing of these cases. The 1st case study is a heavy dust episode (DE) in April (during ACE-Asia) 2001 and the 2nd case is a regional-scale pollution event in November 2001. The Ångström exponent (Å) for DE was 0.38 from sunphotometer measurements. The mean single scattering albedo (550 nm) at the surface reported during the pollution episode (PE, 0.88) was lower than that of DE (0.91). The concentrations of organic (OC) and elemental carbon (EC) measured during the PE were about 90% and 30% higher than DE. The aerosol mass scattering efficiency (α_s) of PE is a factor of about 2 higher than that of the DE. The difference in the mass absorption efficiency (α_a) of EC during DE and PE is small and within the measurement uncertainty. The diurnally averaged aerosol radiative forcing efficiency (ΔDFE, W m⁻² τ⁻¹) during DE is similar to results of other studies at Gosan.     

Present and potential future contributions of sulfate,black and organic carbon aerosols from China to global air quality,premature mortality and radiative forcing

Aerosols are harmful to human health and have both direct and indirect effects on climate. China is a major contributor to global emissions of sulfur dioxide (SO₂), a sulfate (SO₄^2?) precursor, organic carbon (OC), and black carbon (BC) aerosols. Although increasingly examined, the effect of present and potential future levels of these emissions on global premature mortality and climate change has not been well quantified. Through both direct radiative effects and indirect effects on clouds, SO₄^2? and OC exert negative radiative forcing (cooling) while BC exerts positive forcing (warming). We analyze the effect of China's emissions of SO₂, SO₄^2?, OC and BC in 2000 and for three emission scenarios in 2030 on global surface aerosol concentrations, premature mortality, and radiative forcing (RF). Using global models of chemical transport (MOZART-2) and radiative transfer (GFDL RTM), and combining simulation results with gridded population data, mortality rates, and concentration–response relationships from the epidemiological literature, we estimate the contribution of Chinese aerosols to global annual premature mortality and to RF in 2000 and 2030. In 2000, we estimate these aerosols cause approximately 470 000 premature deaths in China and an additional 30 000 deaths globally. In 2030, aggressive emission controls lead to a 50% reduction in premature deaths from the 2000 level to 240 000 in China and 10 000 elsewhere, while under a high emissions scenario premature deaths increase 50% from the 2000 level to 720 000 in China and to 40 000 elsewhere. Because the negative RF from SO₄^2? and OC is larger than the positive forcing from BC, Chinese aerosols lead to global net direct RF of ?74 mW m^?2 in 2000 and between ?15 and ?97 mW m^?2 in 2030 depending on the emissions scenario. Our analysis indicates that increased effort to reduce greenhouse gases is essential to address climate change as China's anticipated reduction of aerosols will result in the loss of net negative radiative forcing.     

Simulation of aerosol radiative properties with the ORISAM-RAD model during a pollution event (ESCOMPTE 2001)

The aim of this study is to present the organic and inorganic spectral aerosol module-radiative (ORISAM-RAD) module, allowing the 3D distribution of aerosol radiative properties (aerosol optical depth, single scattering albedo and asymmetry parameter) from the ORISAM module. In this work, we test ORISAM-RAD for one selected day (24th June) during the ESCOMPTE (expérience sur site pour contraindre les modèles de pollution atmosphérique et de transport d’emissions) experiment for an urban/industrial aerosol type. The particle radiative properties obtained from in situ and AERONET observations are used to validate our simulations. In a first time, simulations obtained from ORISAM-RAD indicate high aerosol optical depth (AOD)0.50–0.70±0.02 (at 440 nm) in the aerosol pollution plume, slightly lower (10–20%) than AERONET retrievals. In a second time, simulations of the single scattering albedo (ω_o) have been found to well reproduce the high spatial heterogeneities observed over this domain. Concerning the asymmetry parameter (g), ORISAM-RAD simulations reveal quite uniform values over the whole ESCOMPTE domain, comprised between 0.61±0.01 and 0.65±0.01 (at 440 nm), in excellent agreement with ground based in situ measurements and AERONET retrievals. Finally, the outputs of ORISAM-RAD have been used in a radiative transfer model in order to simulate the diurnal direct radiative forcing at different locations (urban, industrial and rural). We show that anthropogenic aerosols strongly decrease surface solar radiation, with diurnal mean surface forcings comprised between −29.0±2.9 and −38.6±3.9 W m⁻², depending on the sites. This decrease is due to the reflection of solar radiations back to space (−7.3±0.8<ΔF_TOA<−12.3±1.2 W m⁻²) and to its absorption into the aerosol layer (21.1±2.1<ΔF_ATM<26.3±2.6 W m⁻²). These values are found to be consistent with those measured at local scale.     

Urban impacts on regional carbonaceous aerosols: Case study in central Texas

Rural and background sites provide valuable information on the concentration and optical properties of organic, elemental, and water-soluble organic carbon (OC, EC, and WSOC), which are relevant for understanding the climate forcing potential of regional atmospheric aerosols. To quantify climate- and air quality-relevant characteristics of carbonaceous aerosol in the central United States, a regional background site in central Texas was chosen for long-term measurement. Back trajectory (BT) analysis, ambient OC, EC, and WSOC concentrations and absorption parameters are reported for the first 15 months of a long-term campaign (May 2011–August 2012). BT analysis indicates consistent north–south airflow connecting central Texas to the Central Plains. Central Texas aerosols exhibited seasonal trends with increased fine particulate matter (<2.5 μm aerodynamic diameter, PM_2.5) and OC during the summer (PM_2.5 = 10.9 μg m^?3 and OC = 3.0 μg m^?3) and elevated EC during the winter (0.22 μg m^?3). When compared to measurements in Dallas and Houston, TX, central Texas OC appears to have mixed urban and rural sources. However, central Texas EC appears to be dominated by transport of urban emissions. WSOC averaged 63% of the annual OC, with little seasonal variability in this ratio. To monitor brown carbon (BrC), absorption was measured for the aqueous WSOC extracts. Light absorption coefficients for EC and BrC were highest during summer (EC MAC = 11 m² g^?1 and BRC MAE₃₆₅ = 0.15 m² g^?1). Results from optical analysis indicate that regional aerosol absorption is mostly due to EC with summertime peaks in BrC attenuation. This study represents the first reported values of WSOC absorption, MAE₃₆₅, for the central United States.

Implications:Background concentration and absorption measurements are essential in determining regional potential radiative forcing due to atmospheric aerosols. Back trajectory, chemical, and optical analysis of PM_2.5 was used to determine climatic and air quality implications of urban outflow to a regional receptor site, representative of the central United States. Results indicate that central Texas organic carbon has mixed urban and rural sources, while elemental carbon is controlled by the transport of urban emissions. Analysis of aerosol absorption showed black carbon as the dominant absorber, with less brown carbon absorption than regional studies in California and the southeastern United States.     

On radiative effects of black carbon and sulphate aerosols

Most aerosol particles, such as sulphate and sea-salt particles, mainly scatter solar radiation, whilst soot (in the form of elemental carbon or “black” carbon, BC) in addition leads to considerable absorption. This scattering and absorption by the aerosol particles constitute the so-called direct aerosol effect. In this paper, we present results from a study of possible direct effects of tropospheric BC and sulphate aerosols, with an emphasis on BC aerosols, along a line from North Africa through Europe into the Arctic. Radiative budgets in a cloud-free atmosphere are estimated. Based on model-calculated distributions of BC and sulphate (provided by Seland and Iversen, 1998) and assumed size distributions of the background aerosol, new size distributions are obtained by adding natural, biomass burning and fossil fuel contributions to the background aerosol. Added nucleation mode particles are assumed externally mixed, whereas added accumulation mode BC and sulphate is internally mixed with the background according to condensational growth and Brownian coagulation theory. Humidity effects are taken into account by use of the Köhler equation. Mie calculations provide the resulting optical parameters, and the forcing is finally estimated by use of a radiative transfer model. A reference run and a series of eleven test-runs are performed to investigate the sensitivity of various assumptions on the contribution to upward TOA irradiance from BC and non-sea-salt sulphate. The tests suggest a high sensitivity to presence of BC and to particle swelling due to humidity. The sensitivity to assumed distribution of BC on particle size is more moderate. The same is true for the vertical resolution and the number concentration of the background aerosol. The effect of mixing organic carbon (OC) internally with biomass burning BC nucleation mode particles is characterized as moderate. The role of OC is, however, still uncertain. The same holds true for the optical thickness of the background atmosphere, for which we found a high sensitivity in this study. Other assumptions that were investigated had only small effects on the forcing. For the reference run we find a minimum in the aerosol forcing of approximately −5 W m^-2 near the most polluted areas in Europe, and a maximum of approximately 2 W m^-2 over North Africa. A warming effect is also found for the Arctic region, with forcing values up to 0.4 W m^-2.     

Sources,distribution, and acidity of sulfate–ammonium aerosol in the Arctic in winter–spring

We use GEOS-Chem chemical transport model simulations of sulfate–ammonium aerosol data from the NASA ARCTAS and NOAA ARCPAC aircraft campaigns in the North American Arctic in April 2008, together with longer-term data from surface sites, to better understand aerosol sources in the Arctic in winter–spring and the implications for aerosol acidity. Arctic pollution is dominated by transport from mid-latitudes, and we test the relevant ammonia and sulfur dioxide emission inventories in the model by comparison with wet deposition flux data over the source continents. We find that a complicated mix of natural and anthropogenic sources with different vertical signatures is responsible for sulfate concentrations in the Arctic. East Asian pollution influence is weak in winter but becomes important in spring through transport in the free troposphere. European influence is important at all altitudes but never dominant. West Asia (non-Arctic Russia and Kazakhstan) is the largest contributor to Arctic sulfate in surface air in winter, reflecting a southward extension of the Arctic front over that region. Ammonium in Arctic spring mostly originates from anthropogenic sources in East Asia and Europe, with added contribution from boreal fires, resulting in a more neutralized aerosol in the free troposphere than at the surface. The ARCTAS and ARCPAC data indicate a median aerosol neutralization fraction [NH₄⁺]/(2[SO₄^2?] + [NO₃^?]) of 0.5 mol mol^?1 below 2 km and 0.7 mol mol^?1 above. We find that East Asian and European aerosol transported to the Arctic is mostly neutralized, whereas West Asian and North American aerosol is highly acidic. Growth of sulfur emissions in West Asia may be responsible for the observed increase in aerosol acidity at Barrow over the past decade. As global sulfur emissions decline over the next decades, increasing aerosol neutralization in the Arctic is expected, potentially accelerating Arctic warming through indirect radiative forcing and feedbacks.     

Radiative effects of aerosols over Indo-Gangetic plain: environmental (urban vs. rural) and seasonal variations

Aerosol radiative effects over two environmentally distinct locations, Kanpur (urban site) and Gandhi College (rural location) in the Indo-Gangetic plain (IGP), a regional aerosol hot spot, utilizing the measured optical and physical characteristics of aerosols, an aerosol optical properties model and a radiative transfer model, are examined. Shortwave aerosol radiative forcing (ARF) at the top of the atmosphere (TOA) is 30 W m(?-?2)). Shortwave atmospheric heating due to aerosols is >0.4 K/day over IGP and peaks during premonsoon at >0.6 K/day due to lower single scattering albedo (SSA) and higher surface albedo. TOA forcing is always less negative over Kanpur when compared to Gandhi College due to lower surface albedo except in postmonsoon owing to higher SSA. This happens as TOA forcing depends on SSA and surface albedo in addition to aerosol optical depth. The magnitude of longwave forcing and atmospheric cooling in an absolute sense is significantly small and contributes only about 20% or less to the net (shortwave + longwave) forcing. Aerosol radiative effects over these two locations, despite differences in aerosol characteristics, are similar, thus confirming that aerosols and their radiative influence get transported due to circulation. ARF over Kanpur and Gandhi College is an order of magnitude higher when compared to greenhouse gas forcing. A large reduction in surface reaching solar irradiance accompanied by large atmospheric warming can have implications on precipitation and hydrological cycle, and these aerosol radiative effects should be included while performing regional-scale aerosol climate assessments.     

Regional climate forcing of aerosol estimated by a box model for a rural site in Central Europe during summer

In the present work, a box model is applied to estimate the direct climate forcing of aerosol particles for rural air in Central Europe during summertime. In the model, the input parameters reflect regional character: data from satellite observations and other surface measurements are used referring to the selected area, Hungary. In the calculation of direct climate forcing of aerosol particles satellite observations serve as the source of incoming solar radiation intensity data and cloudiness, while different aerosol parameters of the model (mass extinction coefficient, chemical composition, scale height, hygroscopic growth factor, etc.) are based on local measurements. Finally, surface albedo of the area studied was determined on the basis of vegetation cover and precipitation amount. As the summary of our calculations, in Central Europe direct climate forcing of ammonium sulfate is equal to –2.4 W m⁻². The climate forcing of total carbon is composed of two terms. The forcings due to scattering and absorption are –1.0 and +0.2 W m⁻², respectively. In spite of the fact that the mass concentrations of ammonium sulfate and total carbon are similar, their contribution to the aerosol direct forcing is different. We conclude that ammonium sulfate plays the major role in this process and organics have an additional impact.     

Anthropogenic sulphate aerosol from India: estimates of burden and direct radiative forcing

A one-box chemical-meteorological model had been formulated to make preliminary estimates of sulphate aerosol formation and direct radiative forcing over India. Anthropogenic SO₂ emissions from India, from industrial fuel use and biomass burning, were estimated at 2.0 Tg S yr^-1 for 1990 in the range of previous estimates of 1.54 and 2.55 Tg S yr ^-1 for 1987. Meteorological parameters for 1990 from 18 Indian Meteorological Department stations were used to estimate spatial average sulphate burdens through formation from SO₂ reactions in gas and aqueous phase and removal by dry and wet deposition. The hydrogen peroxide reaction was found dominating for undepleted oxidant-rich conditions. Monthly mean sulphate burdens ranged from 2–10 mg m^-2 with a seasonal variation of winter–spring highs and summer lows in agreement with previous GCM studies. The sulphate burdens are dominated by sulphate removal rates by wet deposition, which are high in the monsoon period from June–November. Monthly mean direct radiative forcing from sulphate aerosols is high (−3.5 and −2.3 W m^-2) in December and January, is moderate (−1.3 to −1.5 W m^-2) during February to April and November and low (−0.4 to −0.6 W m^-2) during May to October also in general agreement with previous GCM estimates. This model, in reasonable agreement with detailed GCM results, gives us a simple tool to make preliminary estimates of sulphate burdens and direct radiative forcing.     

Modeling the spectral optical properties of ammonium sulfate and biomass burning aerosols: parameterization of relative humidity effects and model results

The importance of including the global and regional radiative effects of aerosols in climate models has increasingly been realized. Accurate modeling of solar radiative forcing due to aerosols from anthropogenic sulfate and biomass burning emissions requires adequate spectral resolution and treatment of spatial and temporal variability. The variation of aerosol spectral optical properties with local relative humidity and dry aerosol composition must be considered. Because the cost of directly including Mie calculations within a climate model is prohibitive, parameterizations from off-line calculations must be used. Starting from a log-normal size distribution of dry ammonium sulfate, we developed optical properties for tropospheric sulfate aerosol at 15 relative humidities up to 99%. The resulting aerosol size distributions were then used to calculate bulk optical properties at wavelengths between 0.175 and 4 μm. Finally, functional fits of optical properties were made for each of 12 wavelength bands as a function of relative humidity. Significant variations in optical properties occurred across the total solar spectrum. Relative increases in specific extinction and asymmetry factor with increasing relative humidity became larger at longer wavelengths. Significant variation in single-scattering albedo was found only in the longest near-IR band. This is also the band with the lowest single scattering albedo. A similar treatment was done for aerosols from biomass burning. In this case, two size distributions were considered. One was based on a distribution measured for Northern Hemisphere temperate forest fires while the second was based on a measured size distribution for tropical fires. Equilibrium size distributions and compositions were calculated for 15 relative humidities and five black carbon fractions. Mie calculations and band averages of optical properties were done for each of the resulting 75 cases. Finally, fits were made for each of 12 spectral bands as functions of relative humidity and black carbon fraction. These optical properties result in global average forcing from anthropogenic sulfate aerosols of −0.81 Wm^-2. The global average forcing for biomass aerosols ranged from −0.23 to −0.25 Wm^-2 depending on the assumed size distribution, while fossil fuel organic and black carbon are estimated to heat the atmosphere by about 0.16 Wm^-2.     

Aerosol radiative forcing over the Indo-Gangetic plains during major dust storms

Indo-Gangetic (IG) alluvial plains, one of the largest river basins in the world, suffers from the long range transport of mineral dust from the western arid and desert regions of Africa, Arabia and Rajasthan during the summer (pre-monsoon season, April–June). These dust storms influence the aerosol optical depth (AOD) across the IG plains. The Kanpur AERONET (Aerosol Robotic Network) station and Moderate Resolution Imaging Spectro-radiometer (MODIS) data show pronounced effect on the aerosol optical properties and aerosol size distribution during major dust storm events over the IG plains that have significant effect on the aerosol radiative forcing (ARF). The multi-band AOD, from AERONET and MODIS, show contrasting changes in wavelength dependency over dust affected regions. A time collocated (±30 min) validation of AERONET AOD with MODIS Terra (level 2 swath product) over Kanpur, at a common wavelength of 550 nm for the period 2001–2005 show moderate correlation (R²∼0.6) during the summer season. The average surface forcing is found to change by −23 W m⁻² during dust events and the top of the atmosphere (TOA) forcing change by −11 W m⁻² as compared to the non-dusty clear-sky days. A strong correlation is found between AOD at 500 nm and the ARF. At surface, the correlation coefficient between AOD and ARF is found to be high (R²=0.925) and is found to be moderate (R²=0.628) at the TOA. The slope of the regression line gives the aerosol forcing efficiency at 500 nm of about −46±2.6 W m⁻² and −17±2.5 W m⁻² at the surface and the TOA, respectively. The ARF is found to increase with the advance of the dry season in conjunction with the gradual rise in AOD (at 500 nm) from April (0.4–0.5) to June (0.6–0.7) over the IG plains.     

Comparison of organic compositions in dust storm and normal aerosol samples collected at Gosan,Jeju Island,during spring 2005

To better understand the current physical and chemical properties of East Asian aerosols, an intensive observation of atmospheric particles was conducted at Gosan site, Jeju Island, South Korea during 2005 spring. Total suspended particle (TSP) samples were collected using pre-combusted quartz filters and a high-volume air sampler with the time intervals ranging from 3 h to 48 h. The kinds and amount of various organic compounds were measured in the samples using gas chromatography–mass spectrometry. Among the 99 target compounds detected, saccharides (average, 130 ± 14 ng m^?3), fatty acids (73 ± 7 ng m^?3), alcohols (41 ± 4 ng m^?3), n-alkanes (32 ± 3 ng m^?3), and phthalates (21 ± 2 ng m^?3) were found to be major compound classes with polyols/polyacids, lignin and resin products, PAHs, sterols and aromatic acids being minor. Compared to the previous results reported for 2001 late spring samples, no significant changes were found in the levels of their concentrations and compositions for 4 years, although the economy in East Asia, especially in China, has sharply expanded from 2001 to 2005. During the campaign at Gosan site, we encountered two distinct dust storm episodes with high TSP concentrations. The first dust event occurred on March 28, which was characterized by a predominance of secondary organic aerosols. The second event that occurred on the next day (March 29) was found to be characterized by primary organic aerosols associated with forest fires in Siberia/northeastern China. A significant variation in the molecular compositions, which was found within a day, suggests that the compositions of East Asian aerosols are heterogeneous due to multi-contributions from different source regions together with different pathways of long-range atmospheric transport of particles.     

Characterization and sources assignation of PM2.5 organic aerosol in a rural area of Spain

The results from a year-long study of the organic composition of PM2.5 aerosol collected in a rural area influenced by a highway of Spain are reported. The lack of prior information related to the organic composition of PM2.5 aerosol in Spain, concretely in rural areas, led definition of the goals of this study. As a result, this work has been able to characterize the main organic components of atmospheric aerosols, including several compounds of SOA, and has conducted a multivariate analysis in order to assign sources of particulate matter. A total of 89 samples were taken between April 2004 and April 2005 using a high-volume sampler. Features and abundance of n-alkanes, polycyclic aromatic hydrocarbons (PAHs), alcohols and acids were separately determined using gas chromatography/mass spectrometry and high performance liquid chromatography analysis. The Σn-alkane and ΣPAHs ranged from 3 to 81 ng m^?3 and 0.1 to 6 ng m^?3 respectively, with higher concentrations during colder months. Ambient concentrations of Σalcohols and Σacids ranged from 21 to 184 ng m^?3 and 39 to 733 ng m^?3, respectively. Also, several components of secondary organic aerosol have been quantified, confirming the biogenic contribution to ambient aerosol. In addition, factor analysis was used to reveal origin of organic compounds associated to particulate matter. Eight factors were extracted accounting more than 83% of the variability in the original data. These factors were assigned to a typical high pollution episode by anthropogenic particles, crustal material, plant waxes, fossil fuel combustion, temperature, microbiological emissions, SOA and dispersion of pollutants by wind action. Finally, a cluster analysis was used to compare the organic composition between the four seasons.