Income inequality,ecological footprint,and carbon dioxide emissions in Asian developing economies: what effects what and how?

The reduction of income inequality and environmental vulnerability is the most important factor, through which we can achieve the target of Sustainable Development Goals (SDGs). The past papers have investigated the nexus between income inequality and carbon emissions; however, the relationship between income inequality and carbon emissions along with ecological footprint has not been studied in the case of developing countries. To this end, this study analyzed the impact of income inequality on both carbon emissions and ecological footprint as well as the impact of carbon emission and ecological footprint on income inequality by using the dataset from 2006 to 2017 for the 18 Asian developing economies. This study confirmed the positive relationship between carbon emissions, ecological footprint, and income inequality under the methodology of Driscoll and Kraay (D&K) standard error approach. Specifically, a higher-income gap is destructive for environmental degradation, whereas increasing level of carbon emissions and ecological footprint also leads to rising income inequality in the investigated region. Furthermore, foreign direct investment (FDI), easy access to electricity, and population growth control income inequality, but they have a detrimental effect on both ecological footprint and carbon emissions. The empirical findings also provide some important policy implications.

     

Does globalization affect the green economy and environment? The relationship between energy consumption,carbon dioxide emissions,and economic growth

Environmental Science and Pollution Research - This study analyzes the relationship between globalization, energy consumption, and economic growth among selected South Asian countries to promote...     

Economics of carbon dioxide capture and utilization—a supply and demand perspective

Lately, the technical research on carbon dioxide capture and utilization (CCU) has achieved important breakthroughs. While single CO₂-based innovations are entering the markets, the possible economic effects of a large-scale CO₂ utilization still remain unclear to policy makers and the public. Hence, this paper reviews the literature on CCU and provides insights on the motivations and potential of making use of recovered CO₂ emissions as a commodity in the industrial production of materials and fuels. By analyzing data on current global CO₂ supply from industrial sources, best practice benchmark capture costs and the demand potential of CO₂ utilization and storage scenarios with comparative statics, conclusions can be drawn on the role of different CO₂ sources. For near-term scenarios the demand for the commodity CO₂ can be covered from industrial processes, that emit CO₂ at a high purity and low benchmark capture cost of approximately 33 €/t. In the long-term, with synthetic fuel production and large-scale CO₂ utilization, CO₂ is likely to be available from a variety of processes at benchmark costs of approx. 65 €/t. Even if fossil-fired power generation is phased out, the CO₂ emissions of current industrial processes would suffice for ambitious CCU demand scenarios. At current economic conditions, the business case for CO₂ utilization is technology specific and depends on whether efficiency gains or substitution of volatile priced raw materials can be achieved. Overall, it is argued that CCU should be advanced complementary to mitigation technologies and can unfold its potential in creating local circular economy solutions.     

Could curcumin ameliorate titanium dioxide nanoparticles effect on the heart? A histopathological,immunohistochemical, and genotoxic study

Environmental Science and Pollution Research - The evaluation of the toxicological effects of titanium dioxide nanoparticles (TiO2NPs) is increasingly important due to their growing occupational...     

Inventory of aerosol and sulphur dioxide emissions from India: I—Fossil fuel combustion

A comprehensive, spatially resolved (0.25°×0.25°) fossil fuel consumption database and emissions inventory was constructed, for India, for the first time. Emissions of sulphur dioxide and aerosol chemical constituents were estimated for 1996–1997 and extrapolated to the Indian Ocean Experiment (INDOEX) study period (1998–1999). District level consumption of coal/lignite, petroleum and natural gas in power plants, industrial, transportation and domestic sectors was 9411 PJ, with major contributions from coal (54%) followed by diesel (18%). Emission factors for various pollutants were derived using India specific fuel characteristics and information on combustion/air pollution control technologies for the power and industrial sectors. Domestic and transportation emission factors, appropriate for Indian source characteristics, were compiled from literature. SO₂ emissions from fossil fuel combustion for 1996–1997 were 4.0 Tg SO₂ yr⁻¹, with 756 large point sources (e.g. utilities, iron and steel, fertilisers, cement, refineries and petrochemicals and non-ferrous metals), accounting for 62%. PM_2.5 emitted was 0.5 and 2.0 Tg yr⁻¹ for the 100% and the 50% control scenario, respectively, applied to coal burning in the power and industrial sectors. Coal combustion was the major source of PM_2.5 (92%) primarily consisting of fly ash, accounting for 98% of the “inorganic fraction” emissions (difference between PM_2.5 and black carbon+organic matter) of 1.6 Tg yr⁻¹. Black carbon emissions were estimated at 0.1 Tg yr⁻¹, with 58% from diesel transport, and organic matter emissions at 0.3 Tg yr⁻¹, with 48% from brick-kilns. Fossil fuel consumption and emissions peaked at the large point industrial sources and 22 cities, with elevated area fluxes in northern and western India. The spatial resolution of this inventory makes it suitable for regional-scale aerosol-climate studies. These results are compared to previous studies and differences discussed. Measurements of emission factors for Indian sources are needed to further refine these estimates.     

Inventory of aerosol and sulphur dioxide emissions from India. Part II—biomass combustion

A spatially resolved biomass burning data set, and related emissions of sulphur dioxide and aerosol chemical constituents was constructed for India, for 1996–1997 and extrapolated to the INDOEX period (1998–1999). Sources include biofuels (wood, crop waste and dung-cake) and forest fires (accidental, shifting cultivation and controlled burning). Particulate matter (PM) emission factors were compiled from studies of Indian cooking stoves and from literature for open burning. Black carbon (BC) and organic matter (OM) emissions were estimated from these, accounting for combustion temperatures in cooking stoves. Sulphur dioxide emission factors were based on fuel sulphur content and reported literature measurements. Biofuels accounted 93% of total biomass consumption (577 MT yr⁻¹), with forest fires contributing only 7%. The national average biofuel mix was 56 : 21 : 23% of fuelwood, crop waste and dung-cake, respectively. Compared to fossil fuels, biomass combustion was a minor source of SO₂ (7% of total), with higher emissions from dung-cake because of its higher sulphur content. PM_2.5 emissions of 2.04 Tg yr⁻¹ with an “inorganic fraction” of 0.86 Tg yr⁻¹ were estimated. Biomass combustion was the major source of carbonaceous aerosols, accounting 0.25 Tg yr⁻¹ of BC (72% of total) and 0.94 Tg yr⁻¹ of OM (76% of total). Among biomass, fuelwood and crop waste were primary contributors to BC emissions, while dung-cake and forest fires were primary contributors to OM emissions. Northern and the east-coast India had high densities of biomass consumption and related emissions. Measurements of emission factors of SO₂, size resolved aerosols and their chemical constituents for Indian cooking stoves are needed to refine the present estimates.     

Assessing spatial variability of ambient nitrogen dioxide in Montréal, Canada, with a land-use regression model

The purpose of this study was to derive a land-use regression model to estimate on a geographical basis ambient concentrations of nitrogen dioxide (NO2) in Montreal, Quebec, Canada. These estimates of concentrations of NO2 will be subsequently used to assess exposure in epidemiologic studies on the health effects of traffic-related air pollution. In May 2003, NO2 was measured for 14 consecutive days at 67 sites across the city using Ogawa passive diffusion samplers. Concentrations ranged from 4.9 to 21.2 ppb (median 11.8 ppb). Linear regression analysis was used to assess the association between logarithmic concentrations of NO2 and land-use variables derived using the ESRI Arc 8 geographic information system. In univariate analyses, NO2 was negatively associated with the area of open space and positively associated with traffic count on nearest highway, the length of highways within any radius from 100 to 750 m, the length of major roads within 750 m, and population density within 2000 m. Industrial land-use and the length of minor roads showed-no association with NO2. In multiple regression analyses, distance from the nearest highway, traffic count on the nearest highway, length of highways and major roads within 100 m, and population density showed significant associations with NO2; the best-fitting regression model had a R2 of 0.54. These analyses confirm the value of land-use regression modeling to assign exposures in large-scale epidemiologic studies.     

Titanium dioxide and graphitic carbon nitride–based nanocomposites and nanofibres for the degradation of organic pollutants in water: a review

Environmental Science and Pollution Research - The paper reviews graphitic carbon nitride–based nanostructured photocatalytic materials and nanofibres for applications in water purification....     

Trend analysis of monthly sulfur dioxide emissions in the conterminous United States, 1975–1984

Trends in monthly sulfur dioxide emissions for the 48 conterminous United States during the decade 1975–1984 are identified using a robust nonparametric procedure. Statistically significant downward trends are indicated in 32 States, upward trends appear in 10 States, and no significant trend is apparent in six States. Geographically, a distinct regional pattern of emission increases and decreases is evident with declines dominating the Eastern and Western States; increases aligning longitudinally from border to border in most of the Great Plains States, in several New England States, and in Georgia; and no trends frequently occurring in proximity to the upward trending emissions in the Plains States. A time-series decomposition of the monthly values indicates that one distinct emissions pattern commonly occurred through the period of record. This pattern is characterized by an initial emissions increase that peaks between 1977 and 1978, followed by a shallow and undulating decrease through the end of 1984. It is suggested that this signature represents the ‘national’ trend for the period. In addition, five regions of coherent sulfur dioxide emissions behavior are defined on the basis of seasonal occurrence of maximum and minimum emission loadings. A winter-summer, latitudinal opposition is apparent in the timing of emissions maxima, whereas an equinox-summer, longitudinal opposition is apparent in the timing of emissions minima.     

Testing the relationship between globalization and carbon dioxide emissions in Pakistan: does environmental Kuznets curve exist?

Over the last few decades, the atmospheric carbon dioxide emission has been amplified to a great extent in Pakistan. This amplification may cause global warming, climate change, and environmental degradation in Pakistan. Consequently, ecological condition and human life may suffer in the near future from these indicated threats. Therefore, an attempt was made to test the relationship between globalization and carbon dioxide emissions in case of Pakistan. The study covers the time series data over the period of 1975–2014. We employed modern econometric techniques such as Johansen co-integration, ARDL bound testing approach, and variance decomposition analysis. Results of the Johansen co-integration test show that there is a significant long-run relationship between carbon dioxide emissions and globalization. The long-run elasticities of the ARDL model show that a 1% increase in economic globalization, political globalization, and social globalization will increase carbon dioxide emissions by 0.38, 0.19, and 0.11%, respectively. Further, our findings reveal that the environmental Kuznets curve (EKC) hypothesis prevails an inverted U-shaped relationship between carbon dioxide emission and economic growth. Therefore, the EKC hypothesis is valid in the presence of globalization. The diagnostic test results show that the parameters of the ARDL model are credible, stable, and reliable in the current form. Finally, variance decomposition analysis displays that economic, political, and social globalization are contributing significantly to carbon dioxide emissions in Pakistan.

     

Toxicity, dioxin-like activities, and endocrine effects of DDT metabolites—DDA, DDMU, DDMS, and DDCN

Background, aim, and scope  

2,2-bis(chlorophenyl)-1,1,1-trichloroethane (DDT) metabolites, other than those routinely measured [i.e., 2,2-bis(chlorophenyl)-1,1-dichloroethylene (DDE) and 2,2-bis(chlorophenyl)-1,1-dichloroethane (DDD)], have recently been detected in elevated concentrations not only in the surface water of Teltow Canal, Berlin, but also in sediment samples from Elbe tributaries (e.g., Mulde and Havel/Spree). This was paralleled by recent reports that multiple other metabolites could emerge from the degradation of parent DDT by naturally occurring organisms or by interaction with some heavy metals. Nevertheless, only very few data on the biological activities of these metabolites are available to date. The objective of this communication is to evaluate, for the first time, the cytotoxicity, dioxin-like activity, and estrogenicity of the least-studied DDT metabolites.     

Field evaluations of newly available “interference-free” monitors for nitrogen dioxide and ozone at near-road and conventional National Ambient Air Quality Standards compliance sites

Long-standing measurement techniques for determining ground-level ozone (O₃) and nitrogen dioxide (NO₂) are known to be biased by interfering compounds that result in overestimates of high O₃ and NO₂ ambient concentrations under conducive conditions. An increasing near-ground O₃ gradient (NGOG) with increasing height above ground level is also known to exist. Both the interference bias and NGOG were investigated by comparing data from a conventional Federal Equivalent Method (FEM) O₃ photometer and an identical monitor upgraded with an “interference-free” nitric oxide O₃ scrubber that alternatively sampled at 2 m and 6.2 m inlet heights above ground level (AGL). Intercomparison was also made between a conventional nitrogen oxide (NO_x) chemiluminescence Federal Reference Method (FRM) monitor and a new “direct-measure” NO₂ NO_x 405 nm photometer at a near-road air quality measurement site. Results indicate that the O₃ monitor with the upgraded scrubber recorded lower regulatory-oriented concentrations than the deployed conventional metal oxide–scrubbed monitor and that O₃ concentrations 6.2 m AGL were higher than concentrations 2.0 m AGL, the nominal nose height of outdoor populations. Also, a new direct-measure NO₂ photometer recorded generally lower NO₂ regulatory-oriented concentrations than the conventional FRM chemiluminescence monitor, reporting lower daily maximum hourly average concentrations than the conventional monitor about 3 of every 5 days.

Implications: Employing bias-prone instruments for measurement of ambient ozone or nitrogen dioxide from inlets at inappropriate heights above ground level may result in collection of positively biased data. This paper discusses tests of new regulatory instruments, recent developments in bias-free ozone and nitrogen dioxide measurement technology, and the presence/extent of a near-ground O₃ gradient (NGOG). Collection of unbiased monitor inlet height–appropriate data is crucial for determining accurate design values and meeting National Ambient Air Quality Standards.     

Carbon Monoxide and Sulfur Dioxide Adsorption on— and Desorption from Glass,Plastic, and Metal Tubings

It was planned to install 305 m (1000 ft) of tubing on a television tower to transport ambient air samples from different height levels to pollutant monitoring instruments at ground level. A feasibility study was undertaken to determine the sorption characteristics of sulfur dioxide and carbon monoxide on various conduit materials. Sorption studies were completed on 30.5 m (100 ft) lengths of 1.3 cm (Y2 in) diam tubings of glass, Teflon, tygon, polypropylene, PVC piping, aluminum, and stainless steel. Final tests were completed on 305 m of 1.9 cm (3/4 in) diam stainless steel tubing. The following variables were investigated: tubing diameter, gas concentration, flowrate through the tubing, temperature, humidity, and the effect of sorption with sulfur dioxide and carbon monoxide alone or together. The parameter ranges studied approximated either atmospheric or air sampling conditions. For carbon monoxide, there was no significant difference between the mean inlet and outlet tubing concentrations under the conditions of the study. With sulfur dioxide, there was neither tubing adsorption nor desorption under the experimental parameters studied, except for tygon, PVC, and aluminum. After a conditioning period with sulfur dioxide, tygon, PVC, and aluminum could also be used as air inlet conduits; tygon is not recommended.     

Industrial transformation and shrimp aquaculture in Thailand and Vietnam: pathways to ecological,social, and economic sustainability?

Shrimp aquaculture in Vietnam is in the process of being transformed into a major industry around the intensification of the production system. The experiences of other countries in the region, especially in Thailand where high input production systems dominate, suggests that now is a critical time for intervention to redirect industry into pathways that are more sustainable ecologically, socially, and economically. In Thailand, years of experience with intensified systems and a complex industrial organization has not led to sustainable solutions. The challenge here is for society to regain control and then to redirect the transformation along more efficient and benign pathways. Our analyses suggest that current pathways in both countries are unlikely to lead to a sustainable industry. A complete transformation of the way shrimp are grown, fed, processed, distributed, and regulated is needed.     

Temporal and spatial trends of PCBs,DDTs, HCHs,and HCB in Swedish marine biota 1969–2012

In the 1960s, the Baltic Sea was severely polluted by organic contaminants such as PCBs, HCHs, HCB, and DDTs. Elevated concentrations caused severe adverse effects in Baltic biota. Since then, these substances have been monitored temporally and spatially in Baltic biota, primarily in herring (Clupea harengus) and in guillemot (Uria aalge) egg, but also in cod (Gadus morhua), perch (Perca fluviatilis), eelpout (Zoarces viviparous), and blue mussel (Mytilus edulis). These chemicals were banned in Sweden in the late 1970s/early 1980s. Since the start of monitoring, overall significant decreases of about 70–90 % have been observed. However, concentrations are still higher in the Baltic Sea than in, for example, the North Sea. CB-118 and DDE exceed the suggested target concentrations (24 µg kg^?1 lipid weight and 5 µg kg^?1 wet weight, respectively) at certain sites in some of the monitored species, showing that concentrations may still be too high to protect the most sensitive organisms.     

PCB153 and p,p′-DDE disorder thyroid hormones via thyroglobulin,deiodinase 2, transthyretin,hepatic enzymes and receptors

Polychlorinated biphenyls (PCBs) and DDT are widespread environmental persistent organic pollutants that have various adverse effects on reproduction, development and endocrine function. In order to elucidate effects of PCBs and DDT on thyroid hormone homeostasis, Sprague–Dawley rats were dosed with PCB153 and p,p′-DDE intraperitoneally (ip) for five consecutive days and sacrificed within 24 h after the last dose. Results indicated that after combined exposure to PCB153 and p,p′-DDE, total thyroxine , free thyroxine, total triiodothyronine, and thyroid-stimulating hormone in serum were decreased, whereas free triiodothyronine and thyrotropin-releasing hormone were not affected. Thyroglobulin and transthyretin levels in serum were significantly reduced. mRNA expression of deiodinases 2 (D2) was also suppressed, while D1 and D3 levels were not significantly influenced after combined exposure. PCB153 and p,p′-DDE induced hepatic enzymes, UDPGTs, CYP1A1, CYP2B1, and CYP3A1 mRNA expressions being significantly elevated. Moreover, TRα1, TRβ1, and TRHr expressions in the hypothalamus displayed increasing trends after combined exposure to PCB153 and p,p′-DDE. Taken together, observed results indicate that PCB153 and p,p′-DDE could disorder thyroid hormone homeostasis via thyroglobulin, deiodinase 2, transthyretin, hepatic enzymes, and hormone receptors.     

PM2.5, soot and NO2 indoor–outdoor relationships at homes,pre-schools and schools in Stockholm,Sweden

In developed nations people spend about 90% of their time indoors. The relationship between indoor and outdoor air pollution levels is important for the understanding of the health effects of outdoor air pollution. Although other studies describe both the outdoor and indoor atmospheric environment, few excluded a priori major indoor sources, measured the air exchange rate, included more than one micro-environment and included the presence of human activity. PM_2.5, soot, NO₂ and the air exchange rate were measured during winter and summer indoors and outdoors at 18 homes (mostly apartments) of 18 children (6–11-years-old) and also at the six schools and 10 pre-schools that the children attended. The three types of indoor environments were free of environmental tobacco smoke and gas appliances, as the aim was to asses to what extent PM_2.5, soot and NO₂ infiltrate from outdoors to indoors. The median indoor and outdoor PM_2.5 levels were 8.4 μg m^?3 and 9.3 μg m^?3, respectively. The median indoor levels for soot and NO₂ were 0.66 m^?1 × 10^?5 and 10.0 μg m^?3, respectively. The respective outdoor levels were 0.96 m^?1 × 10^?5 and 12.4 μg m^?3. The median indoor/outdoor (I/O) ratios were 0.93, 0.76 and 0.92 for PM_2.5, soot and NO₂, respectively. Their infiltration factors were influenced by the micro-environment, ventilation type and air exchange rate, with aggregated values of 0.25, 0.55 and 0.64, respectively. Indoor and outdoor NO₂ levels were strongly associated (R² = 0.71), followed by soot (R² = 0.50) and PM_2.5 (R² = 0.16). In Stockholm, the three major indoor environments occupied by children offer little protection against combustion-related particles and gases in the outdoor air. Outdoor PM_2.5 seems to infiltrate less, but indoor sources compensate.     

C5–C12 volatile organic compounds at roadside,residential, and background locations in Ankara,Turkey: Temporal and spatial variations and sources

Abstract

Particle emissions of modern diesel engines are of a particular interest because of their negative health effects. The special interest is in nanosized solid particles. The effect of an open channel filter on particle emissions of a modern heavy-duty diesel engine (MAN D2066 LF31, model year 2006) was studied. Here, the authors show that the open channel filter made from metal screen efficiently reduced the number of the smallest particles and, notably, the number and mass concentration of soot particles. The filter used in this study reached 78% particle mass reduction over the European Steady Cycle. Considering the size-segregated number concentration reduction, the collection efficiency was over 95% for particles smaller than 10 nm. The diffusion is the dominant collection mechanism in small particle sizes, thus the collection efficiency decreased as particle size increased, attaining 50% at 100 nm. The overall particle number reduction was 66–99%, and for accumulation-mode particles the number concentration reduction was 62–69%, both depending on the engine load.