固体废物浸出液中氰化物测定方法的探讨

用金矿废渣样品进行氰化物的浸提试验,对浸提剂的pH值、浸提次数等条件进行优化。经实际样品验证,确定pH值〉12的碱性水溶液为最佳浸提剂,浸出液中易释放氰化物和总氰化物可用硝酸银滴定法或异烟酸一巴比妥酸分光光度法测定,方法检出限分别为0．25mg／L、0．001mg／L,加标回收率为90．0％～92．0％,测定结果的RSD〈8％。     

改进吡啶—巴比妥酸比色法快速测定水中氰化物

文献 [1 ]中规定采用吡啶—巴比妥酸比色法测定水中的氰化物时 ,需要在 40℃水浴中显色2 0ｍｉｎ ,现改用在 2 0℃水浴中显色 1 0ｍｉｎ进行氰化物的测定 ,经对比实验 ,通过水样测试发现两者测定值无显著差别。1　对比实验1 1　不同浓度标准溶液对比实验各取 0 5ｍｇ/Ｌ～ 6 0ｍｇ/Ｌ———系列氰化物标准使用液 ,分别在 40℃水浴中显色 2 0ｍｉｎ(简称原方法 )和在 2 0℃水浴中显色 1 0ｍｉｎ(简称新方法 )测定其吸光值 (Ａ) ,结果如下表 1。表 1　不同浓度标准溶液对比分析结果　　　Ａ试验方法 标准溶液浓度　ｃ/ (ｍｇ·Ｌ-1)0 5 0 1…     

多元配合物胶束增溶光度法测定微量氰化物

根据CN-对丁二酮肟-Ni-OP-10体系的增色作用,建立了一种测定微量氰化物的新方法.该方法操作简便,选择性好,不需要蒸馏和萃取.CN-量在0～5μg/25ml内符合比尔定律,用于环境水中氰化物的测定,结果满意.     

硫化物存在时直接测定工业废水中氰化物

硫化物存在时直接测定工业废水中氰化物金芳澄（福建省环境监测中心站３５０００３）一般来说废水中氰化物测定，先进行蒸馏，然后将馏出液用硝酸银标准溶液进行滴定。由于蒸馏操作耗时又麻烦，本文探讨革除蒸馏、直接滴定废水中氰化物，用硝酸铅沉淀样品中硫化物以排除干...     

固体废物氰化物总量和浸出毒性测定方法的比较

中国现行的固体废物氰化物总量和氰化物浸出毒性的分析方法存在缺陷,不便于广泛指导监测工作,笔者优化了固体废物氰化物测定的前处理方法,明确了固体废物氰化物总量、氰化物浸出毒性测定时的样品粒径、浸提方法和消解方法,建立了容量法、分光光度法、流动注射法测定固体废物氰化物总量和浸出毒性的方法,并与标准方法（离子色谱法）进行比较。实验结果表明：容量法、分光光度法、流动注射法测定结果与离子色谱法无显著差异,3种方法测定固体废物氰化物总量加标回收率为80.5%~102%,平行样测定相对标准偏差为3.0%~6.9%,3种方法测定固体废物氰化物浸出毒性加标回收率为80.1%~107%,平行样测定相对标准偏差为7.8%~9.5%,3种方法测定结果精密度和准确度良好,均能够满足固体废物氰化物总量和氰化物浸出毒性的测定要求。其中容量法、分光光度法由于其仪器设备简单、操作简便,可用于突发环境事件应急监测等情况下固体废物氰化物的测定。但容量法检出限较高,不能满足评价标准较低的分析测试工作要求,离子色谱法、分光光度法和流动注射法检出限均能满足一般分析测试要求。     

异烟酸——吡唑啉酮光度法测定高浓度总氰化物的初探

用零浓度空白管经显色后的试液作稀释液，对高浓度总氰化物显色后的样品进行稀释分析测定，这样可提高高浓度总氰化物测定结果的淮确度和精密度，与直接稀释法测定的结果等效。     

离子色谱法测定氰化物的改进

化学法测定工业废水中氰化物 ,干扰物质较多 ,通常需作蒸馏预处理 ,用离子色谱法测定则简单得多。水样采集后 ,立即加入氢氧化钠 ,使氰化钠水解生成甲酸钠 ,用HPICAS4阴离子柱分离 ,0 0 0 50mol/LNa2 B4O7·H2 O作淋洗液 ,抑制型电导检测器进行测定 ,由HCOONa的质量浓度可得出CN-的质量浓度。用此方法测定CN- ,灵敏度较低 ,为mg/L级。改用 1 4 7mmol/L乙二胺、1 0mmol/LNa2 H2 BO3、1 0mmol/LNa2 CO3作淋洗液 ,同样分离柱分离 ,电导检测器测定 ,可达到 μg/L级。离子色谱法测定氰化物的改进@董国强$肥城市环境监测中心站!山…     

水中痕量氰化物的高灵敏冷原子吸收间接测定方法

鉴于汞冷原子吸收光度法测定汞的高灵敏度，提出了一种间接地测定水中痕量氰化物的新方法。由于汞与ＣＮ－能生成稳定的络合物，处于化合态的汞不再被还原为原子态的乘，因而，可在不经分离的情况下，用汞冷原子吸收光度法测定剩余的汞，从而求出氰化物的含量．方法经实验证明，灵敏度高，重现性好，快速简便。     

FIA流动注射仪同时测定水中挥发酚和氰化物

通过应用FIA流动注射分析仪,成功进行水中挥发酚和氰化物的同时测定,测定数据准确、可靠、高效,大大缩短了测定时间,只需将两种标准配制成混合标样,一次取样完成两个项目的测定。回收率为93%～106%,相关系数达到0 9998以上。     

水中氰化物快速测定的方法探讨

利用CN-在苯偶姻缩合反应中的催化作用建立催化快速法,结合测试管法与便携式分光光度法的优势,提出新型氰化物快速定量测定法,并优化该方法的试验条件,使方法在0 mg/L~0.200 mg/L范围内线性良好,检出限为0.005 mg/L。将该方法用于测定氰化物有证标准物质,6次测定结果的RSD为0.5%~2.6%,实际水样的加标回收率为85.0%~110%。该方法与国标法的比对试验表明,2种方法测定结果无显著性差异。     

Topsoil and Housedust Metal Concentrations in the Vicinity of a Lead Battery Manufacturing Plant

The aim of the study was to determine the extent of heavy metal pollution in the vicinity of a lead battery manufacturing plant in the Czech Republic, both in the general environment and within homes. Topsoils (0–5 cm) were sampled from 100 sites along 4 transects which crossed the battery factory, the town centre and outlying rural areas. Housedust samples were collected from 15 plant-workers' homes and 15 non plant-workers' homes located at various distances from the factory. Samples were analysed for levels of Pb, Zn, Cd, Cu, As and Sb, using ICP-AES. Soil concentrations of Pb, Cd, As and Sb peaked at the perimeter fence of the battery factory with Pb levels of up to 12 650 g g> ^-1. Concentrations of these metals decreased exponentially within 500 m of the plant. Whilst the battery factory does appear to be a source of all the metals with the exception of Zn, emissions do not appear to be transported to any great extent over distances of more than 0.5 km. Topsoil and housedust concentrations of Pb, Zn, Cd, Cu, As and Sb in the general Mlada Boleslav area do not appear to be significantly different from those recorded in a large scale survey of urban soils in the United Kingdom. A comparison of housedust Pb concentrations in homes of plant workers and non-plant workers suggests that there may be a small input of Pb into the home environment by battery plant employees.     

微波消解-原子吸收光度法测定土壤中铜锌铅镉镍铬

用微波消解－原子吸收光度法测定土壤中铜，锌，铅，镉，镍和铬。通过硝酸－氢氟酸－过氧化氢体系消解液对土壤样品消解，选择出微波最佳消解条件。对硝酸－盐酸－过氧化氢体系消解液和硝酸－氢氟酸－过氧化氢体系消解液进行消解对比试验，发现前者不能将土壤样品完全消解，后者能将样品消解完全，但需将消解液中剩余的酸赶尽，否则测定结果将明显偏低。微波消解土壤与传统电热消解相比，操作简便快速，可提高工作效率。     

An Overview of Contaminant-Related Issues Identified by Monitoring in San Francisco Bay

The San Francisco Estuary Regional Monitoring Program for Trace Substances (RMP) began in 1993 and is sponsored by 74 local, state, and federal agencies and companies through their discharge or Bay use permits. The RMP monitors water, sediment, toxicity, and bivalve bioaccumulation at 25 sites in the Bay that are considered to represent "background" conditions. Several major environmental issues have been identified by the RMP. Polychlorinated biphenyls and mercury were often above water quality guidelines, and often occurred in fish tissues above U.S. Environmental Protection Agency (U.S. EPA) screening values. Concentrations do not appear to be decreasing, suggesting continuing inputs. Episodes of aquatic toxicity often occurred following runoff events that transport contaminants into the Bay from urbanized and agricultural portions of the watershed. Sediment toxicity occurred throughout the Bay, and has been correlated with concentrations of specific contaminants (chlordanes, polynuclear aromatic hydrocarbons) at some locations; mixtures of contaminants were probably also important. Since the RMP does not monitor all ecosystem components, assessments of the overall condition of the Bay cannot be made. However, in terms of contamination, the RMP samples suggest that the South Bay, and North Bay sites are moderately contaminated.     

Biomagnification factors (fish to Osprey eggs from Willamette River,Oregon, U.S.A.) for PCDDs,PCDFs, PCBs and OC pesticides

A migratory population of 78 pairs of Osprey (Pandion haliaetus) nesting along the Willamette River in westernOregon was studied in 1993. The study was designed to determinecontaminant concentrations in eggs, contaminant concentrationsin fish species predominant in the Ospreys diet, andBiomagnification Factors (BMFs) of contaminants from fish specieseaten to Osprey eggs. Ten Osprey eggs and 25 composite samplesof fish (3 species) were used to evaluate organochlorine (OC)pesticides, polychlorinated biphenyls (PCBs), polychlorinateddibenzo-p-dioxins (PCDDs), and polychlorinated dibenzofurans(PCDFs). Mercury was also analyzed in fish. Geometric meanresidues in Osprey eggs were judged low, e.g., DDE 2.3 g g^-1 wet weight (ww), PCBs 0.69 g g^-1, 2,3,7,8-TCDD 2.3 ng kg^-1, and generally well below known threshold values for adverse effects on productivity, and the population was increasing. Osprey egg residue data presentedby River Mile (RM) are discussed, e.g., higher PCDDs were generally found immediately downstream of paper mills and eggsfrom the Willamette River had significantly elevated PCBs and PCDDs compared to reference eggs collected nearby in the CascadeMountains. Prey remains at nest sites indicated that the Largescale Sucker (Catostomus macrocheilus) and NorthernPikeminnow (Ptychocheilus oregonensis) accounted for an estimated 90.1% of the biomass in the Osprey diet, and composite samples of these two species were collected from different sampling sites throughout the study area for contaminant analyses. With the large percentage of the fishbiomass in the Osprey diet sampled for contaminants (and fisheaten by Ospreys similar in size to those chemically analyzed),and fish contaminant concentrations weighted by biomass intake, a mean BMF was estimated from fish to Osprey eggs for the largeseries of contaminants. BMFs ranged from no biomagnification(0.42) for 2,3,7,8-TCDF to 174 for OCDD. Our findings for themigratory Osprey were compared to BMFs for the resident HerringGull (Larus argentatus), and differences are discussed. Webelieve a BMF approach provides some basic understanding ofrelationships between contaminant burdens in prey species offish-eating birds and contaminants incorporated into their eggs,and may prove useful in understanding sources of contaminants inmigratory species although additional studies are needed.     

The Draft of the New German Guideline VDI 3782/8 to Model Automobile Exhaust Dispersion

The draft of the German guideline to calculate automobile exhaust dispersion is explained. It contains a two-stage-system: For first quick estimates the guideline contains the simple models MLuS and STREET. In case these models are not applicable or their results shows concentration levels close to the air quality standards, the more complex models PROKAS_V and MISKAM are recommended. PROKAS_V is a Gaussian plume model, MISKAM is a 3-dimensional microscale non hydrostatic flow model for built-up areas with an Eulerian dispersion model. The guideline comprises cases in rural areas without or with few adjacent buildings as well as urban areas with buildings near the roads. The contribution gives information about the models, typical results and some of the problems showing up presently.     

Hydrocarbon Utilization in Yeast Isolates Found to Grow in Association with Petroleum in a Polluted Ultisol of Midwestern Nigeria

The population counts of hydrocarbon-utilising yeasts weremonitored at six sampling stations in the Benin City municipalarea over a four-week period. Although the population countswere relatively constant in each locality, the highest countsoccurred in areas heavily polluted by domestic and industrialeffluents. A total of thirty-five hydrocarbon-degrading yeastswere isolated from soil at the sampling stations usingn-hexadecane as sole carbon source. The isolates were identifiedas belonging to the genera Candida (27 strains), Endomycopsis (4 strains). All the organisms grew on long-chainn-alkane, kerosene, diesel oil and crude oil but failed to growon short-chain n-alkane, aromatic and alicyclic hydrocarbons.Measurement of growth attributes of the isolates usingn-hexadecane, diesel oil and crude oil as substrates showed thatthe Candida species were better utilizers of hydrocarbonsubstrates relative to Endomycopsis and Schizosaccharomyces species.     

Hydrologic–Economic Model for Managing Irrigation Intensity in Irrigation Areas under Watertable and Soil Salinity Targets

This paper gives mathematical details and sample applications of SWAGMAN Farm (SWAGMAN, Salt Water and Groundwater Management), a farm-scale hydrologic economic model that integrates agronomic, climatic, irrigation, hydrogeological and economic aspects of irrigated agriculture. The model is capable of determining optimum mix of land use to keep watertable and soil salinity within acceptable limits while maximising the economic returns. Alternatively, the model can simulate water and salt balance and economics of a given cropping preference. Web-based and Geographic Information Systems versions of the model are available for integration with the environmental reporting systems of the irrigation areas.     

火焰原子吸收光谱法测定苏州开发区26种蔬菜中铜锌铁锰镍

用火焰原子吸收光谱法测定了苏州开发区26种蔬菜中的铜、锌、铁、锰和镍的含量。蔬菜样品用硝酸高氯酸混合酸进行消解。4次测定值的相对标准差<5%,加标回收率在92%～107%之间。26种蔬菜中铜、锌、铁、锰、镍的含量基本均在世贸组织规定的范围内。     

Cyanobacterial Flora from Polluted Marine Shores

Citation of cyanobacterial cultures from the shores of south west coast of Gujarat, India and their relationship with sea water quality, influenced by extensive pollutant runoff is reported in this study. Intensity of pollution was evaluated by physico-chemical analysis of water. Higher load of suspended solids (60–1000 mg l⁻¹) and nutrients (PO₄ ⁻P: 1.3–4 μmole l⁻¹ and NO₃ ⁻N: 12.5–17.8 μmole l⁻¹) were persistent throughout the analysis. Community structure is seen to be influenced by such persistent pollution. Twenty nine cyanobacterial species were isolated belonging to 9 genera of 4 families, with an elevated occurrence of Oscillatoria and Lyngbya species. No heterocystous cyanobacteria were isolated throughout the study.     

Using Multiple Taxonomic Groups to Index the Ecological Condition of Lakes

Biological indicators of communitiestypically reflect a common environmental signalreflecting the general condition of the ecosystem, as well asindividual signals by indicators differentiallysensitive to particular environmental conditions. Wedescribe here a method of integrating and interpretingsuch indicators from 19 New England lakes for fivetaxonomic groups (diatoms, benthos, zooplankton, fish,and birds). Our approach provides a systematicstandardized way to integrate multiple metrics fromdifferent taxonomic groups by addressing four elementscrucial to analyzing data from multiple indicators: covariate control, re-scaling of data, standardizing the sign of responses, and dimensional reduction. We evaluated the biologicalmetrics against individual environmental stressors andagainst multivariate physicochemical metricscharacterizing general anthropogenic stress among thelakes. The method detected a response to variationin the gross environmental condition of the lakes thatwas correlated across taxa and metrics. In addition,a differential response to near shore conditions wasdemonstrated for fish. The success of the approach inthis study lends support to its general application toecological monitoring involving complex data sets.