Distribution of chromium, cadmium, nickel and lead in agricultural soils collected from Kazanli-Mersin, Turkey

This study reports total levels of chromium, cadmium, nickel and lead in the agricultural land adjacent a factory producing chromate compounds in Kazanli-Mersin. Surface soil samples were collected from fields around the factory as well as from fields farther away to measure contamination due to aerial transportation and deposition of dust produced in the industrial process. Heavy metals in soil were extracted using wet digestion, and concentrations were measured by atomic absorption spectrophotometry. The concentrations were compared with Turkish maximum allowable concentration values. The metal concentrations averaged 80, 0.14, 228 and 431mg1kg^-1 for chromium, cadmium, nickel and lead, respectively. Soil samples contaminated with chromium were mainly found 500–20001m from the factory and decreased with increasing distance from the factory. Elevated chromium and nickel concentrations were determined in the soils around the factory, especially to the northwest (prevailing wind) and west. Lead concentrations exceeded the limit in only roadside soils (4000 and 50001m to the west), but tended to increase in the vicinity of industrial activity (especially in the west, the northwest and the north). The cadmium concentration did not exceed the limit and was within the normal range for soils.     

Atmospheric deposition of polycyclic aromatic hydrocarbons to Izmit Bay, Turkey

Wet deposition and dry deposition samples were collected in an urban/industrialized area of Izmit Bay, North-eastern Marmara Sea, Turkey, from September 2002 to July 2003. The samples were analyzed for sixteen polycyclic aromatic hydrocarbon (PAH) compounds by using HPLC-UV technique. Wet and dry deposition concentrations and fluxes of PAHs were determined. The results showed that PAH concentrations were high because of industrial processes, heavy traffic and residential areas next to the sampling site. Total dry deposition flux of the fifteen 3-6 ring PAHs was 8.30 microg m(-2)day(-1), with a range of 0.034-1.77 microg m(-2)day(-1). The total wet deposition flux of the fifteen 3-6 ring PAHs was 1716 microg m(-2) 11 month(-1), with a range of 10-440 microg m(-2) 11 month(-1). Significant seasonal differences were observed in both types of deposition samples. The winter fluxes of total PAHs were 1.5 and 2.5 times greater than those of the warm period for wet and dry deposition samples, respectively. Factor analysis of dry deposition samples and back trajectory analysis of wet deposition samples were also used to characterize and identify the PAH emission sources in this study.     

Mosses as biomonitors of atmospheric heavy metal deposition: Spatial patterns and temporal trends in Europe

In recent decades, mosses have been used successfully as biomonitors of atmospheric deposition of heavy metals. Since 1990, the European moss survey has been repeated at five-yearly intervals. Although spatial patterns were metal-specific, in 2005 the lowest concentrations of metals in mosses were generally found in Scandinavia, the Baltic States and northern parts of the UK; the highest concentrations were generally found in Belgium and south-eastern Europe. The recent decline in emission and subsequent deposition of heavy metals across Europe has resulted in a decrease in the heavy metal concentration in mosses for the majority of metals. Since 1990, the concentration in mosses has declined the most for arsenic, cadmium, iron, lead and vanadium (52-72%), followed by copper, nickel and zinc (20-30%), with no significant reduction being observed for mercury (12% since 1995) and chromium (2%). However, temporal trends were country-specific with sometimes increases being found.     

Trace metal residues in finfish from Maryland waters, 1978-1979

Levels of seven heavy metal residues, arsenic, cadmium, chromium, copper, lead, mercury and zinc were monitored in samples of various species of finfish harvested from the Maryland section of the Chesapeake Bay and its tributaries over a two year period (1978-79). Results of the analysis of the edible portions of these finfish are presented along with the species of finfish, date and location of harvest. A number of samples of finfish gonad and liver tissue were analyzed to study the relative level of preconcentration of heavy metals in these tissues compared to the edible (flesh) portion. Results of this study are consistent with other available data for Atlantic Coast finfish. Gonad tissue, when compared to flesh, show enrichment of copper and zinc and decreased mercury and cadmium levels. Liver tissue shows enrichment in copper, zinc and cadmium and generally lower levels of mercury compared to flesh.     

Accumulation of lead and cadmium in the marine prosobranch Nerita saxtilis, chemical analysis, light and electron microscopy.

The potential value of the marine prosobranch Nerita saxtilis as an efficient biological monitor to heavy metal pollution in the Red Sea was investigated. Storage ability of lead and cadmium was compared in shell, headfoot and digestive gland of the marine snail N. saxtilis collected from Al-Hamrauin area at El-kuseir (lead, 300.35 +/- 28.53 microg/l, 1,716 +/- 16.14. cadmium 20.01 +/- 1.8 microg/l, 161.72 +/- 21.4 mean +/- S.D. for water and sediment, respectively) relative to that of inhabiting marine water and sediment employing atomic absorption spectrometry to determine the organ with highest capability of heavy metal accumulation. The influence of metal storage on light microscopic structure of that organ was investigated. Also, the ultrastructure localization of storage sites in the same organ was determined employing transmission electron microscopy. The digestive gland was shown to accumulate both metals at conccntrations that are several orders of magnitude higher than those in the surrounding marine water. The bioaccumulation capability of lead and cadmium was ranked in the following order; digestive gland > headfoot > shell for lead and digestive gland > shell > headfoot for cadmium. In spite of its evident highest metal storage capability, no histopathological changes were observed in the digestive gland of that marine prosobranch. Enlarged electron dense vesicles and many granules were observed in ultrathin sections in digestive cells of these snails and are suggested to be the sites of storage of detoxified metals. The results of that finding indicate the possibility of using the marine prosobranch N. saxtilis as biomonitor for heavy metal contaminants in the Red Sea.     

Atmospheric mercury levels in the Slovak Republic.

Total mercury concentrations (as a sum of vapor and particulate mercury) were measured in 24-h samples of ambient air in 20 different localities of the Slovak Republic eight times during the period 1996-1997. Vapor mercury was analyzed on site by atomic fluorescence with amalgamation technique. Particulate mercury was determined by vapor hydride atomic absorption spectrometry after wet digestion of filters with particulate air samples. The results showed that 34% of the 160 individual total mercury concentrations exceeded 5 ng/m3--the ambient air quality guideline value recommended by the WHO. The range of total mercury concentrations in the ambient air of Slovakia was: 1.13-3.98 ng/m3 (geom. mean 2.63) in the background area; 2.25-5.27 ng/m3 (geom. mean 3.64) in the agricultural areas; 1.73-20.53 ng/m3 (geom. mean 4.57) in the urban areas; and 1.53-39.85 ng/m3 (geom. mean 5.28) in the industrial areas. The highest mercury levels occurred in areas with metallurgical industry and coal combustion. The predominant form of mercury present in air was vapor mercury. The particulate fraction of mercury in ambient air (as a percentage of total mercury) varied widely from 0.4% to 42.1% (geom. mean = 4.4%). This fraction was lower in agricultural areas (2.3%) than in urban areas (5.3%). Although the atmospheric vapor mercury concentrations were slightly higher in summer than in winter, a direct correlation of vapor mercury concentrations and ambient air temperature was not found. Furthermore, the particulate mercury concentrations did not correlate with total particulate levels.     

Trace metal residues in shellfish from Maryland waters, 1976-1980

Levels of seven heavy metal residues, arsenic, cadmium, chromium, copper, lead, mercury and zinc were monitored in samples of the American oyster (Crassostrea virginica), the soft shell clam (Mya arenaria), the hard shell clam (Mercinaria mercinaria) and the blue crab (Callinectes sapidus). Samples were taken from the Maryland section of the Chesapeake Bay and its tributaries over a five year period (1976-80). This study was undertaken to provide an estimate of a baseline for values of trace heavy metals. Also, the oyster, being a non-mobile filter feeder, provides information regarding the level of metal residues in its environment (water and sediment), because heavy metal uptake is related to the surrounding metal concentrations. Additionally, this type of monitoring program is essential to ensure that shellfish sold for human consumption are within safe limits established for toxic substances by the United States Food and Drug Administration. Results of the study are consistent with data from previous years and no statistically significant year-to-year trends were observed over the period of the investigation.     

Toxic Trace Elements Associated with Airborne Particulate Matter: A Review

This article provides a concise review of published literature pertaining to sampling and analytical methodologies, aerometric studies, source identification techniques and modeling activities for the elements arsenic, cadmium, nickel, lead, vanadium, zinc, cobalt, chromium, copper, iron, mercury, manganese, selenium and antimony, and their compounds, associated with airborne particulate matter. Sampling techniques discussed include filtration and inertial separation. Analytical methodologies such as atomic absorption and atomic emission spectrometry, neutron activation analysis, and X-ray fluorescence spectrometry are summarized. Data on atmospheric levels of 14 trace elements are presented in summary form from numerous studies in remote, rural and urban areas, and generally indicate that concentrations measured at rural locations are several orders of magnitude lower than those measured for urban areas. Source identification methodologies are discussed in terms of advantages and disadvantages, and various applications are cited for the following categories: size differentiation, enrichment factors, chemical mass balance, and multivariate models. Provided that reliable trace element data are available for both the source and the receptor, chemical mass balance and multivariate methods can account for up to 80 percent of all sources contributing to the observed ambient air concentration. Wet and dry deposition processes are reviewed and environmental measurement data are provided for each element for remote, rural and urban locations. Both wet and dry deposition fluxes need to be considered for trace elements when estimating the total annual amounts of various trace elements deposited at a particular locale. Global cycles and trace element budgets are introduced in the context of the types of models currently in use. Limitations include inadequate global scale surveys of heavy metal concentrations and the lack of knowledge of sources and/or sinks.     

Periphyton as monitors for heavy metal pollution in the Calcasieu River estuary

The levels of copper, lead, chromium, zinc, cadmium, arsenic and silver were determined in periphyton specimens obtained with a diatometer collector. Stations selected were along three important bayous of the Calcasieu River system. Distributions of some metals in the organisms were similar to those found in sediment from the same locations, while other metals appeared to be similar to water concentrations. Concentration ratios of periphyton over sediment greatly exceeded one for the metals chromium, zinc, cadmium, arsenic and silver. The concentrations of heavy metals in the periphyton appeared to yield more information about pollutants than either water or sediment samples collected at the periphyton stations.     

Atmospheric heavy metal deposition accumulated in rural forest soils of southern Scandinavia

Thirty-three years of measurements of atmospheric heavy metal (HM) deposition (bulk precipitation) in Denmark combined with European emission inventories form the basis for calculating a 50-year accumulated atmospheric input to a remote forest plantation on the island of Laesoe. Soil samples taken in two depths, 0-10cm and 10-20cm, at eight forest sites at the island were used to determine the increase in HM content in the eolian deposited top soils of the plantation. Concentrations of lead (Pb), cadmium (Cd), copper (Cu), zinc (Zn), vanadium (V), nickel (Ni) and arsenic (As) were determined in atmospheric deposition and in soils. The accumulated atmospheric deposition is of the same magnitude as the increase of these metals in the top soil.     

Toxic and essential trace elements in human milk from Greek lactating women: association with dietary habits and other factors

The aim of this study was to determine the concentration of some essential and toxic metals in the colostrum and transitory human milk in conjunction with various factors that may influence their concentrations i.e. diet, supplementation, place of residence, smoking, as well as socioeconomic and somatometric characteristics. Zinc, iron, copper, manganese, cadmium and lead were measured by AAS in 180 colostrum samples from healthy lactating women collected on third day postpartum. A second milk sample was collected in 95 (53%) subjects 14 days later. Dietary habits were assessed by a 7-day food frequency questionnaire and various characteristics and socio-economic factors were also recorded. The mean (+/-standard deviation) values of colostrum samples were: Zn 4905 +/- 1725 microg l(-1), Fe 544 +/- 348 microg l(-1), Mn 4.79 +/- 3.23 microg l(-1), Cu 381 +/- 132 microg l(-1), Cd 0.190 +/- 0.150 microg l(-1), Pb 0.48 +/- 0.60 microg l(-1). All metals with the exception of copper were found in lower concentrations in transitory samples. Cadmium and lead weekly intakes were found to be below the Maximum Tolerable Weekly Intakes as they have been established for infants by WHO or NRC. Our results revealed: higher Pb concentration in the samples from urban areas; effect of smoking on Cu level; dietary habits seem to play a role in metal levels in human milk as the logistic regression models revealed.     

Trace metals in mussels from mariculture zones, Hong Kong

In 1997, concentrations of cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb) and nickel (Ni) were analysed in green-lipped mussels (Perna viridis) from three mariculture zones located in the north-east (Kat O), south (Lo Tik Wan) and to the west (Ma Wan) of Hong Kong. Spatial differences in the concentration of metals were found, chromium and copper were higher at Ma Wan and Lo Tik Wan compared to Kat O in the north-east. In contrast, the highest levels of lead (mean = 4.37 microg/g dry wt) were recorded at Kat O. There were no differences in the level of nickel between the study sites. A comparison of the metal concentrations in mussels with the results of a previous study seven years before, in 1990, showed a twofold increase in the mean levels of cadmium for all three sites. However, levels of the other metals in 1997 were lower by 12-32% for chromium, 32-39% for copper and 24-25% for nickel. The greatest reductions were recorded for lead: Kat O (39%), Ma Wan (51%) and Lo Tik Wan (75%). This may be related to the introduction of lead-free petrol in 1991. Despite the apparent reduction in some heavy metal bioaccumulation between 1990 and 1997, from a public health risk perspective, the data suggest a continued need for monitoring of heavy metals in mussels from mariculture zones.     

Heavy metal concentrations in green-lipped mussels collected from Tolo Harbour and markets in Hong Kong and Shenzhen

Green-lipped mussels, Perna viridis, were collected from Kat O, Yim Tin Tsai, Ma Liu Shui and Tap Mun around Tolo Harbour and six local markets in Hong Kong (Aberdeen, Shau Kei Wan, Kowloon City, Mongkok, Yuen Long) and Shenzhen (Dongmun) between July 1994 and February 1995 and analysed for cadmium (Cd), chromium (Cr), copper (Cu), nickel (Ni), lead (Pb) and zinc (Zn). The metal concentrations of mussels collected from the study sites were Cd (0.45-1.44 microg/g), Cr (0.82-4.89 microg/g), Cu (6.02-23.99 microg/g), Ni (3.25-6.87 microg/g), Pb (2.02-4.36 microg/g) and Zn (90-135 microg/g), while those from the markets were Cd (0.27-1.44 microg/g), Cr (1.09-3.30 microg/g), Cu (9.05-17.8 microg/g), Ni (2.44-5.25 microg/g), Pb (1.17-5 microg/g) and Zn (51-103 microg/g). The metal concentrations were below the maximum permissible levels set by the Hong Kong Government. In addition, seasonal variation of metal accumulation in mussels was investigated in Yim Tin Tsai and Ma Liu Shui and a reduction in the total heavy metal concentrations during winter was noted. The non-carcinogenic hazard index of mussels collected from Tolo Harbour and from Hong Kong markets was between 0.46 and 1.36 compared with those from Shenzhen markets (0.85-1.46), which indicated a low but possible risk in consuming the mussels.     

Bulk deposition of polycyclic aromatic hydrocarbons (PAHs) in an industrial site of Turkey

Ambient air and deposition samples were collected in the period of July 2004-May 2005 in an industrial district of Bursa, Turkey and analyzed for polycyclic aromatic hydrocarbon (PAH) compounds. The overall average of fourteen bulk deposition fluxes for PAHs was 3300+/-5100 ng m(-2) d(-1). PAH depositions showed a seasonal variation and they were higher in winter months. This was probably due to increases in residential heating activities and decreases in atmospheric mixing layer levels. Ambient air samples, measured with a high volume air sampler, were collected from the same site. The average total concentration including gas and particulate phase was about 300+/-420 ng m(-3) and it was in the range of previously reported values. Some of the ambient air and bulk deposition samples were collected simultaneously in dry periods. Both concurrently measured values were used to calculate the dry deposition velocities whose overall average value was 0.45+/-0.35 cm s(-1).     

Lead and cadmium in indoor air and the urban environment

The present study was conducted to find potential terrestrial biomonitors for heavy metals in indoor air in an urban environment. TSP, PM(10), and PM(2.5) were collected in three retirement facilities in the urban area of Vienna. In addition, particulate matter and soil, vegetation, and isopods (Porcellio scaber L.) were collected in the adjacent garden areas. Aerosols were sampled with a low-volume air sampler. The sampled materials were wet ashed and total lead and cadmium contents were determined. Water-soluble heavy metal concentrations were measured in aqueous extracts from air exposed filters, soil, and vegetation. Lead and cadmium were analyzed by graphite furnace AAS. Lead contents in the vegetation were inferred from water-soluble lead in soils. Lead in isopods generally reflected the contents in vegetation. Cadmium in plants probably derived from soil solutions as well as from atmospheric input. Isopods reflected the total cadmium contents in soils. Particulate matter was dominated by PM(2.5), both with respect to mass concentrations and to heavy metal contents. The indoor aerosol was found to be influenced by human activity, indoor sources, and outdoor particles. Relationships between indoor airborne heavy metals and the contents in vegetation (lead and cadmium: positive) and isopods (lead: negative) were identified to have the potential for biomonitoring indoor air quality.     

Arsenic species and chemistry in groundwater of southeast Michigan

Groundwater samples, taken from 73 wells in 10 counties of southeast Michigan in 1997 had arsenic concentrations in the range of 0.5 to 278 microg/L the average being 29 microg/l. About 12% of these wells had arsenic concentrations that exceeded the current USEPA's maximum contaminant level of 50 microg/l. Most (53-98%) of the arsenic detected was arsenite [As(III)] and other observations supported the arsenic species distribution (low redox potential and DO). In shallow groundwater (< 15 m), arsenic concentrations are low likely due to the formation of insoluble ferrosoferric hydroxide complex. In deep groundwater (> 15 m), the concentration of arsenic is possibly controlled by reductive dissolution of arsenic-rich iron hydroxide/oxyhydroxide and dissolution of arsenic sulfide minerals.     

Evaluation of PCDD/F levels in ambient air and soils and estimation of deposition rates in Kocaeli, Turkey

PCDD/F analyses were made in soil and ambient air samples taken from Kocaeli, an industrialized area of Turkey. Results showed that the levels of PCDD/F pollution are comparable to the levels observed in the various urban areas in the world. PCDD/F concentrations in surface soils ranged between 0.4 and 4.27 pg I-TEQ kg(-1) with a geometric mean of 0.76 pg I-TEQ kg(-1), while those in ambient air were between 23 and 563 f gm(-3), with geometric mean of 82.0 f gm(-3). Ambient air PCDD/F concentration in the city center was about 10 times higher than those in the rural area. Combustion activities present in the area were assessed to be the most significant source of the PCDD/F pollution based on the congener and homologue profiles and statistical analysis of the data. The deposition rate modeling of USEPA was applied and the deposition rates were determined in the range between 7.6 and 66.3 ng I-TEQ m(-2)year(-1) with a geometric mean of 15.9 ng I-TEQ m(-2)year(-1). The rates were higher than the recommended deposition rates in relation to the tolerable daily intake (TDI) range of PCDD/Fs for humans. The deposition velocities computed were also found to be high in both low and highly chlorinated PCDD/Fs, and this was attributed to the vapor phase deposition of volatile PCDD/Fs, and the scavenging effect of the precipitation on the particle-bound PCDD/Fs.     

Atmospheric dry deposition fluxes of trace elements measured in Bursa, Turkey

Trace element dry deposition fluxes were measured using a smooth, greased, knife-edge surrogate surface (KSS) holding greased Mylar strips in Bursa, Turkey. Sampling program was conducted between October 2002 and June 2003 and 46 dry deposition samples were collected. The average fluxes of crustal metals (Mg, Ca, and Fe) were one to four orders of magnitude higher than the fluxes of anthropogenic metals. Trace element fluxes ranged from 3 (Cd) to 24,230 (Ca) microg m(-2) d(-1). The average trace element dry deposition fluxes measured in this study were similar to those measured in other urban areas. In addition, ambient air samples were also collected simultaneously with flux samples and concentrations of trace elements, collected with a TSP sampler, were between 0.7 and 4900 ng m(-3) for Cd and Ca, respectively. The overall trace element dry deposition velocities, calculated by dividing the fluxes to the particle phase concentrations ranged from 2.3+/-1.7 cm s(-1) (Pb) to 11.1+/-6.4 cm s(-1) (Ni). These values are in good agreement with the values calculated using similar techniques. The anthropogenic and crustal contributions were estimated by employing enrichment factors (EFs) calculated relative to the average crustal composition. Low EFs for dry deposition samples were calculated. This is probably due to contamination of local dust and its important contribution to the collected samples.     

Heavy metal speciation and mobility assessment of arid soils in the vicinity of Al Ain landfill, United Arab Emirates

Sixty-four surface soil samples taken in the vicinity of Al Ain landfill were analysed for cadmium, chromium, copper, nickel, lead and zinc by inductively coupled plasma spectroscopy. Extraction techniques were used to establish the association of the total concentrations of the six metals in the soil samples with their contents in the exchangeable, carbonate, iron/manganese oxides, and residual fractions. In the investigated soils, the recorded concentrations were as follows: 0.043 mg kg^-1 for cadmium, 19.1 mg kg^-1 for chromium, 53.3 mg kg^-1 for copper, 60 mg kg^-1 for nickel, 13.7 mg kg^-1 for lead, and 117 mg kg^-1 for zinc. Cadmium, chromium, nickel, lead and zinc concentrations in the investigated soil samples reflect the natural background values in shale, whereas copper is slightly enriched. I-geo (geoaccumulation index) values of the metals in the soils under study indicate that they are uncontaminated with cadmium, chromium, nickel, lead and zinc, but contaminated to moderately contaminated with copper. Heavy metal contents in the sediments were found to be significantly influenced by different physico-chemical parameters. The effect of these parameters can be arranged in the following order: clay fraction > carbonate fraction > silt fraction > organic matter fractions. A sequential extraction procedure showed that the total concentrations of the heavy metals are largely bound to the residual phase (retained 71.4% of cadmium, 77.8% of chromium, 75% of copper, 47% of nickel, 62.8% of lead, and 75.8% of zinc). A likely sequence of mobility in the investigated soils is as follows: chromium > lead > nickel > cadmium > zinc > copper.