Effects of sewage sludge amendment on heavy metal accumulation and consequent responses of Beta vulgaris plants

Use of sewage sludge, a biological residue produced from sewage treatment processes in agriculture is an alternative disposal technique of waste. To study the usefulness of sewage sludge amendment for palak (Beta vulgaris var. Allgreen H-1), a leafy vegetable and consequent heavy metal contamination, a pot experiment was conducted by mixing sewage sludge at 20% and 40% (w/w) amendment ratios to the agricultural soil. Soil pH decreased whereas electrical conductance, organic carbon, total N, available P and exchangeable Na, K and Ca increased in soil amended with sewage sludge in comparison to unamended soil. Sewage sludge amendment led to significant increase in Pb, Cr, Cd, Cu, Zn and Ni concentrations of soil. Cd concentration in soil was found above the Indian permissible limit in soil at both the amendment ratios.

The increased concentration of heavy metals in soil due to sewage sludge amendment led to increases in heavy metal uptake and shoot and root concentrations of Ni, Cd, Cu, Cr, Pb and Zn in plants as compared to those grown on unamended soil. Accumulation was more in roots than shoots for most of the heavy metals. Concentrations of Cd, Ni and Zn were more than the permissible limits of Indian standard in the edible portion of palak grown on different sewage sludge amendments ratios. Sewage sludge amendment in soil decreased root length, leaf area and root biomass of palak at both the amendment ratios, whereas shoot biomass and yield decreased significantly at 40% sludge amendment. Rate of photosynthesis, stomatal conductance and chlorophyll content decreased whereas lipid peroxidation, peroxidase activity and protein and proline contents, increased in plants grown in sewage sludge-amended soil as compared to those grown in unamended soil.

The study clearly shows that increase in heavy metal concentration in foliage of plants grown in sewage sludge-amended soil caused unfavorable changes in physiological and biochemical characteristics of plants leading to reductions in morphological characteristics, biomass accumulation and yield. The study concludes that sewage sludge amendment in soil for growing palak may not be a good option due to risk of contamination of Cd, Ni and Zn and also due to lowering of yield at higher mixing ratio.     

Performance evaluation of intermediate cover soil barrier for removal of heavy metals in landfill leachate

This pilot-scale study evaluated the use of intermediate cover soil barriers for removing heavy metals in leachate generated from test cells for co-disposed fly ash from municipal solid waste incinerators, ash melting plants, and shredder residue. Cover soil barriers were mixtures of Andisol (volcanic ash soil), waste iron powder, (grinder dust waste from iron foundries), and slag fragments. The cover soil barriers were installed in the test cells' bottom layer. Sorption/desorption is an important process in cover soil bottom barrier for removal of heavy metals in landfill leachate. Salt concentrations such as those of Na, K, and Ca in leachate were extremely high (often greater than 30 gL(-1)) because of high salt content in fly ash from ash melting plants. Concentrations of all heavy metals (nickel, manganese, copper, zinc, lead, and cadmium) in test cell leachates with a cover soil barrier were lower than those of the test cell without a cover soil barrier and were mostly below the discharge limit, probably because of dilution caused by the amount of leachate and heavy metal removal by the cover soil barrier. The cover soil barriers' heavy metal removal efficiency was calculated. About 50% of copper, nickel, and manganese were removed. About 20% of the zinc and boron were removed, but lead and cadmium were removed only slightly. Based on results of calculation of the Langelier saturation index and analyses of core samples, the reactivity of the cover soil barrier apparently decreases because of calcium carbonate precipitation on the cover soil barriers' surfaces.     

村镇小型生活垃圾热处理炉底渣的理化特性

小型垃圾热处理设备可实现就地处置,节约运输成本,目前在中国山区、丘陵地带的村镇得到广泛应用.为了解村镇小型生活垃圾热处理炉底渣的理化特性及其影响因素,对中国云南、贵州、安徽村镇实际运行的小型生活垃圾热处理设备产生的底渣进行取样,分析其热灼减率、物理组成、化学组成、晶相组成、重金属含量和浸出特性,探讨处理工艺、地域及季节...     

A Strategy for Reduction of Particulate Emissions in the Boston Area

Initial implementation plans provided for particulate reduction largely through the imposition of emission limitations on industrial processes, large steam generators, and solid waste disposal, requiring, in turn, application of control equipment for compliance. In many urban areas, this approach is not adequate to achieve the secondary air quality standards so that a more general strategy must be employed. Such strategy may include restrictions on fuel burning, combustion equipment, maintenance programs, utility steam distribution, etc. The potential abatement achievable through such strategies is described using Boston as a case study. Cost and technical factors associated with each strategy are discussed.     

Metal partitioning in products of incineration of municipal solid waste

Metals contained in the waste transfer to the waste incineration products, including flue gas, fly ash, and bottom ash, as different oxide, nitride, carbides, and other phases. Most of the metal-based phases formed in incineration are toxic and their emissions need to be strictly controlled. Therefore, behavior of metal species during incineration must be well understood. Such understanding is possible based on the experimental identification of the metal phases formed in the waste combustion and determination of their concentration in various incineration products. To avoid well-known experimental difficulties of the industrial waste incinerators associated with the poor fuel/conditions reproducibility and limited instrumentation, a 140,000 Btu/h pilot-scale, laboratory burner was constructed, characterized and operated at NJIT. A synthetic fuel representative of the municipal solid waste in the US was formulated and produced in 600-Lb batches. The solid fuel contained Fe and SiO2 as main constituents, and was doped with trace amounts of Al, Ni, Cr, Hg and PbO. Several experiments have been conducted on combustion of the synthetic fuel in the pilot-scale incinerator with varying fuel-air equivalence ratio. Both gaseous and condensed combustion products were sampled and analyzed. Atomic absorption spectroscopy and X-ray diffraction were used to analyze total metal contents and metal containing phases in the incineration products. Thermodynamic equilibrium computations were performed to obtain the adiabatic flame temperature and identify the phases of the metal-containing products formed at the equilibrium conditions. The results of the equilibrium computations performed at the varied fuel/air ratios were compared with the observed experimental results.     

Characterisation for some emission sources in CMB calculation for Mae Moh area, Thailand

Particulate samples of agricultural waste burning, straw burning, forest leaf burning, heavy duty truck emission, paved road dust, soil, agricultural soil, coal, electrostatic precipitator ash, and emission from stack power plant were collected from the Mae Moh area. Chemical compositions of sampling filters were analysed to determine the particulate matter source profiles. The analysis included ICP-MS for elemental compositions, ion chromatography for water soluble ions and CHNS/O for carbon species. In all biomass burning profiles organic carbon (OC) was higher during smouldering phase, while elemental carbon (EC) was higher during flaming phase. Results relating to biomass emission during flaming stage showed increase in K⁺. Organic and elemental carbons were the most abundant in biomass burning and truck exhaust. The abundance of EC was much lower, and the abundance of OC was much higher in biomass burning relative to truck exhaust emission. Al, K, Mg, Ca, and Fe were presented with high abundance in road dust, soil, coal, fly ash and stack samples. The differences in chemical compositions were not sufficient to distinguish geological material and fugitive dust sources. Fly ash profile differed from the others since OC and EC were not detected. Na and Zn were most abundant in stack samples. These findings served as a starting point for source contribution study. For future application of source apportionment using the CMB modelling technique, these source profiles should be appropriately grouped and selected to generate reliable outcomes.     

The arbuscular mycorrhizal fungus Glomus mosseae induces growth and metal accumulation changes in Cannabis sativa L

The effect of arbuscular mycorrhiza on heavy metal uptake and translocation was investigated in Cannabis sativa. Hemp was grown in the presence and absence of 100 microg g-1 Cd and Ni and 300 microg g-1 Cr(VI), and inoculated or not with the arbuscular mycorrhizal fungus Glomus mosseae. In our experimental condition, hemp growth was reduced in inoculated plants and the reduction was related to the degree of mycorrhization. The percentage of mycorrhizal colonisation was 42% and 9% in plants grown in non-contaminated and contaminated soil, suggesting a significant negative effect of high metal concentrations on plant infection by G. mosseae. Soil pH, metal bioavailability and plant metal uptake were not influenced by mycorrhization. The organ metal concentrations were not statistically different between inoculated and non-inoculated plants, apart from Ni which concentration was significantly higher in stem and leaf of inoculated plants grown in contaminated soil. The distribution of absorbed metals inside plant was related to the soil heavy metal concentrations: in plant grown in non-contaminated soil the greater part of absorbed Cr and Ni was found in shoots and no significant difference was determined between inoculated and non-inoculated plants. On the contrary, plants grown in artificially contaminated soil accumulated most metal in root organ. In this soil, mycorrhization significantly enhanced the translocation of all the three metals from root to shoot. The possibility to increase metal accumulation in shoot is very interesting for phytoextraction purpose, since most high producing biomass plants, such as non-mycorrhized hemp, retain most heavy metals in roots, limiting their application.     

Emission reductions from woody biomass waste for energy as an alternative to open burning

Woody biomass waste is generated throughout California from forest management, hazardous fuel reduction, and agricultural operations. Open pile burning in the vicinity of generation is frequently the only economic disposal option. A framework is developed to quantify air emissions reductions for projects that alternatively utilize biomass waste as fuel for energy production. A demonstration project was conducted involving the grinding and 97-km one-way transport of 6096 bone-dry metric tons (BDT) of mixed conifer forest slash in the Sierra Nevada foothills for use as fuel in a biomass power cogeneration facility. Compared with the traditional open pile burning method of disposal for the forest harvest slash, utilization of the slash for fuel reduced particulate matter (PM) emissions by 98% (6 kg PM/BDT biomass), nitrogen oxides (NOx) by 54% (1.6 kg NOx/BDT), nonmethane volatile organics (NMOCs) by 99% (4.7 kg NMOCs/BDT), carbon monoxide (CO) by 97% (58 kg CO/BDT), and carbon dioxide equivalents (CO2e) by 17% (0.38 t CO2e/BDT). Emission contributions from biomass processing and transport operations are negligible. CO2e benefits are dependent on the emission characteristics of the displaced marginal electricity supply. Monetization of emissions reductions will assist with fuel sourcing activities and the conduct of biomass energy projects.     

Heavy metal accumulation by Nicotiana glauca Graham in a solid waste disposal site

Nicotiana glauca Graham, is the only perennial shrub growing in a solid waste contaminated site in the Negev desert of Israel. The concentration of heavy metals (Cu, Fe, Mn, Zn, Ni, Cd and Pb) in the upper soil layer was significantly higher (p<0.01) than in non-contaminated desert soil. In root and shoot of N. glauca, growing in the site, the concentration of Cu, Zn and Fe was significantly higher (p<0.05) than in plants of a non-contaminated site. In a controlled experiment, the concentrations of Zn and Cu in root of plants grown, in a mixture of contaminated and non-contaminated soil (1:1) was 9.5 and 4.7 higher than that of plants grown in non-contaminated soil, respectively. While Zn was accumulated in shoot of plants grown in contaminated soil (531 mgkg(-1)) in significantly higher concentration than in plants grown in non-contaminated soil (56 mgkg(-1)), no significant differences were found in Cu accumulation. Growth of N. glauca was inhibited on contaminated soil, but no other obvious stress symptoms were apparent. Therefore, long term experiments under controlled conditions are planned to study the mechanism of heavy metal tolerance and accumulation in N. glauca.     

Waste Streams,Technology, and State Requirements

Biomedical wastes are generated by hospitals, laboratories, animal research facilities, and by other institutional sources. The disposal of these wastes is coming under critical public scrutiny, and regulations are being promulgated to control their disposal. Incineration is not a final disposal method since it generates a solid residue (ash) which must be buried or otherwise disposed. The incineration process, however, renders the waste non-toxic, non-hazardous, and non-putrescible, and reduces the volume of material for ultimate disposal by an order of magnitude. In some instances, the residue may have high levels of heavy metals; however, this is the exception rather than the rule.     

Assessment of the environmental impact of landfill sites with open combustion located in arid regions by combined chemical and ecotoxicological studies

Two different waste disposal sites in Jordan were investigated in order to determine the environmental situation in context with waste disposal techniques. One landfill, located at Marka/Amman, had been closed about 25 years ago and covered with soil. Here, the waste had been actively open combusted and openings in the cover, still emitting smoke, indicated that waste was still smoldering inside the landfill's body. The second disposal site close to Ekeeder/Irbid is still operated. On this ground, the solid waste is not intentionally burned, although spontaneous fires frequently come up. Samples of waste, soil, and entrained dust were collected and analyzed. From the solid samples, respectively, their eluates, sum parameters, ecotoxicological effects as well as contents of elements/heavy metals and organic pollutants (PAH, PCDD/F) were determined. In general, the Ekeeder-samples were low-contaminated. The investigation of the Marka-samples showed higher contamination of the site's center, clearly being influenced by combustion processes. A significant contamination of the landfill's vicinity by its emissions could not be derived from the analytical data. Ecotoxicological investigations, applying a bio-test battery, revealed correlations with the sum parameters but not with the trace pollutants. Thus, the Marka-samples with the highest measured values of sum parameters caused adverse effects on three different test species, whereas other samples from Marka and Ekeeder had small or no effects. The results of these investigations depict the influence of different disposal techniques on the contamination situation of a landfill and they shall contribute to assess the conditions of other disposal sites in (semi)arid regions.     

Inoculation with arbuscular mycorrhizal fungi and addition of composted olive-mill waste enhance plant establishment and soil properties in the regeneration of a heavy metal-polluted environment

A greenhouse experiment was carried out in order to investigate the effects of arbuscular mycorrhizal (AM) fungi inoculation and the use of composted olive waste (COW) in the establishment of Tetraclinis articulata and soil properties in a heavy metal-polluted soil. The treatments assayed were as follows: AM?+?0 % COW, AM?+?1 % COW, and AM?+?3 % COW. The higher doses of COW in combination with AM fungi increased shoot and root biomass production of T. articulata by 96 and 60 %, respectively. These treatments trended to improve the soil properties evaluated, highlighting the C compounds and N as well as the microbiological activities. In relation to the metal translocation in T. articulata, doses of COW applied decreased the Cr, Ni, and Pb contents in shoot, as well as Cr and As in root, although the most of them reached low levels and far from phytotoxic. The COW amendment aided Glomus mosseae-inoculated T. articulata plants to thrive in contaminated soil, mainly through an improvement in both nutrients uptake, mainly P and soil microbial function. In addition, the combined use of AM fungi plus COW could be a feasible strategy to be incorporated in phytoremediation programs because it promotes soil properties, a better performance of plants for supporting the stress in heavy metal-contaminated soils derived from the mining process, and also can be a good way for olive-mill waste disposal.     

Effect of heavy metals on earthworm activities during vermicomposting of municipal solid waste.

The effect of heavy metals on the activities of earthworm species Eudrillus eugineae was studied during vermicomposting of municipal solid waste (MSW) spiked with heavy metals. The activities of earthworms, in terms of growth and biomass production and number of cocoons produced, were monitored periodically, and the concentration of heavy metals in earthworms and substrates was determined at definite intervals. Laboratory-scale experiments were performed by mixing individual heavy metals in MSW. Copper, cadmium, chromium, lead, and zinc were selected for the study. The study concludes that heavy metals tend to accumulate in the body of earthworms; hence, the inherent concentration of heavy metals in the substrate before vermicomposting must be considered in view of composting of MSW and its application to soil. It was observed that copper and cadmium were toxic for the worms at 1.5 and 0.1 g/kg of the waste, respectively. The studies also suggest that earthworms are susceptible to the free form of heavy metals. Cadmium is the most toxic metal, followed by copper. Based on the investigation and observation, it was also found that earthworms should be separated from castings before the use of castings in soil amendments.     

Increased bioavailability of metals in two contrasting agricultural soils treated with waste wood-derived biochar and ash

Recycled waste wood is being increasingly used for energy production; however, organic and metal contaminants in by-products produced from the combustion/pyrolysis residue may pose a significant environmental risk if they are disposed of to land. Here we conducted a study to evaluate if highly polluted biochar (from pyrolysis) and ash (from incineration) derived from Cu-based preservative-treated wood led to different metal (e.g., Cu, As, Ni, Cd, Pb, and Zn) bioavailability and accumulation in sunflower (Helianthus annuus L.). In a pot experiment, biochar at a common rate of 2 % w/w, corresponding to ～50 t ha^?1, and an equivalent pre-combustion dose of wood ash (0.2 % w/w) were added to a Eutric Cambisol (pH 6.02) and a Haplic Podzol (pH 4.95), respectively. Both amendments initially raised soil pH, although this effect was relatively short-term, with pH returning close to the unamended control within about 7 weeks. The addition of both amendments resulted in an exceedance of soil Cu statutory limit, together with a significant increase of Cu and plant nutrient (e.g., K) bioavailability. The metal-sorbing capacity of the biochar, and the temporary increase in soil pH caused by adding the ash and biochar were insufficient to offset the amount of free metal released into solution. Sunflower plants were negatively affected by the addition of metal-treated wood-derived biochar and led to elevated concentration of metals in plant tissue, and reduced above- and below-ground biomass, while sunflower did not grow at all in the Haplic Podzol. Biochar and ash derived from wood treated with Cu-based preservatives can lead to extremely high Cu concentrations in soil and negatively affect plant growth. Identifying sources of contaminated wood in waste stream feedstocks is crucial before large-scale application of biochar or wood ash to soil is considered.     

The Development of Open Pit Incinerators for Solid Waste Disposal

A discussion is presented of a newly developed incinerator for the disposal of solid wastes. It is distinguished from conventional types by its open top, and features a system of closely spaced nozzles admitting a screen of high-velocity air over the burning zone. Results, with a variety of solid industrial wastes, show high burning rates, leading to complete combustion and high flame temperature.     

Impact of the low and high concentrations of fly ash amended soil on growth,physiological response,and yield of pumpkin (Cucurbita moschata Duch. Ex Poiret L.)

Environmental Science and Pollution Research - Fly ash, a result of coal burning in thermal power plants, is sustainably used in agriculture and has been regarded as a problematic solid waste...     

回转窑式纯氧熔融焚烧垃圾技术研究

生活垃圾安全无害化处理是目前迫切需要解决的问题,直接气化熔融焚烧垃圾技术以降低二恶英排放方面巨大优势得到广泛关注,在此基础上提出纯氧熔融焚烧垃圾技术,几乎可以实现所有二次污染物近零排放。以350 t/d回转窑垃圾焚烧炉为例,对纯氧代替空气应用在回转窑上熔融焚烧垃圾系统进行了详细热力计算及分析。结果表明,纯氧熔融焚烧垃圾系统的锅炉效率可达90.56%,回转窑熔融焚烧系统还可以在垃圾焚烧后灰渣达到熔融温度的条件下,保持该系统热量平衡,稳定燃烧。并参考回转窑设计标准对该纯氧熔融焚烧城市生活垃圾的回转窑参数进行确定。     

垃圾焚烧飞灰浸出特性及固化试验的研究

垃圾焚烧飞灰残留有重金属元素和二恶英等物质而被认为是危险废物,必须对之进行稳定化处理.通过试验研究分析了国内首家自主开发成功的广东省东莞市某回转窑垃圾焚烧发电厂垃圾焚烧飞灰的化学成分及矿物组成,研究了飞灰的浸出毒性,考察了水泥固化焚烧飞灰的效果,并与熔融/玻璃固化进行了比较.研究表明,该焚烧飞灰中重金属Cd的浸出毒性严重超标,并且随pH值的减小而增大,水泥固化效果随龄期的增大而更加显著.熔融/玻璃固化的效果优于水泥固化,但其经济性有待提高.     

Uptake of heavy metals and As by Brassica juncea grown in a contaminated soil in Aznalcóllar (Spain): the effect of soil amendments

Two crops of Brassica juncea (L.) Czern. were grown in a field experiment, at the site affected by the toxic spillage of acidic, metal-rich waste in Aznalcóllar (Seville, Spain), to study its metal accumulation and the feasibility of its use for metal phytoextraction. The effects of organic soil amendments (cow manure and mature compost) and lime on biomass production and plant survival were also assessed; plots without organic amendment and without lime were used as controls. Plots, with or without organic amendment, having pH < 5 were limed for the second crop. Soil acidification conditioned plant growth and metal accumulation. The addition of lime and the organic amendments achieved higher plant biomass production, although effects concerning metal bioavailability and accumulation were masked somewhat by pH variability with time and between and within plots. Tissue metal concentrations of B. juncea were elevated for Zn, Cu and Pb, especially in leaves of plants from plots with low pH values (maxima of 2029, 71 and 55 microg g(-1), respectively). The total uptake of heavy metals in the plants was relatively low, emphasising the problems faced when attempting to employ phytoextraction for clean-up of pluri-contaminated sites.     

垃圾焚烧飞灰磷酸洗涤对重金属的固定效应研究

重金属的固定是垃圾焚烧飞灰资源化技术的核心问题.通过系统试验,研究了垃圾焚烧飞灰磷酸洗涤对重金属溶出、后续烧结过程中重金属挥发,以及重金属化学形态变迁的影响.试验结果表明,磷酸洗涤在有效洗脱飞灰中氯盐的情况下,能够显著减少洗涤过程中重金属的溶出,抑制烧结过程中重金属的挥发,从而避免了飞灰处理过程的二次污染;同时,磷酸洗涤使飞灰中的重金属在烧结前后均向更为稳定的化学形态转化,烧结产物中重金属主要以残留态存在,从而提高了烧结产物资源化利用的长期环境安全性.