Moving up the waste hierarchy: Car boot sales,reuse exchange and the challenges of consumer culture to waste prevention

Moving up the waste hierarchy is a key priority for UK waste policy. Waste prevention requires policy interventions to promote reuse. The term ‘reuse exchange’ has been adopted by UK policy makers to describe a variety of second-hand trading outlets including car boot sales, charity shops and online exchange sites. As waste policy is based on tonnage diverted from disposal (or landfill), policy interventions to promote reuse exchange will be based on the weight of goods estimated to be flowing through these sites. This paper uses a combination of field survey data and scale-up estimation to quantify and characterise the weight of goods exchanged at car boot sales in England in 2012. This is estimated at 50–60 000 tonnes per annum. The paper emphasises that movement up the waste hierarchy brings waste policy into closer contact with household consumption practices. It draws on qualitative research to show that, for participants, car boot sales are not associated with waste prevention. Instead, car boot sales rely on stocks of surplus household goods and exemplify the culture of thrift, which enables more, not less, consumption. The paper shows the collision between the social values that inform thrift and the environmental values that underpin reuse; and it argues that the policy goal of enhanced recovery for reuse might best be achieved by working with consumer culture. Two ways of achieving this are suggested: interventions that make it easier for consumers to do the right thing, through promoting opportunities for the circulation of stocks of surplus goods, for example, through increasing the frequency of car boot sales; and interventions which recognise that car boot sales also generate waste, which could be recovered for reuse.     

Improvements in financing for sustainability in solid waste management

Contributing elements toward the development of a sustainable solid waste management system in Tucumán, Argentina, are described. Changes in the working environment for the wastepickers have been instrumental in providing a livable wage and diminished health and environmental risks to the wastepickers and to neighboring residents. Income levels to the wastepickers are now approximately 1.75 times minimum wages in Tucumán and are being driven almost entirely by the recycling of plastics. Educational improvements in Tucumán, which are assisting sustainability of the solid waste system, are being significantly improved by the operation of a pilot scale project, by demonstrating opportunities to government officials and school children. Improved financial sustainability to the solid waste management system is also potentially available from carbon credit trading opportunities, presenting the opportunity for 1.2 times the income available from recycling efforts.     

Assessing determinants of industrial waste reuse: The case of coal ash in the United States

Devising effective strategies to facilitate waste reuse depends on the solid understanding of reuse behaviors. However, previous studies of reuse behavior have been limited in scope, focusing mostly on household recycling behaviors or very limited types of industrial wastes. To gain a better understanding of the business reuse behaviors, this study examined the impact of various factors in technical, economic, regulatory, and behavioral categories in the case of coal ash generated in the United States. The results of fixed effect models for fly ash and bottom ash particularly showed the significance role of the behavioral factor. In both models, a proxy variable, which represents knowledge sharing among the power plants or the utility's decision-making, turned out to be statistically significant and had the largest coefficient estimates among a group of variables. This finding may imply that the characteristics of waste reuse behavior are determined more by business decision-making behaviors than by market or institutional factors. However, the role of the behavioral variable was stronger in the bottom ash models than in the fly ash models. While the reuse of bottom ash was determined primarily by the behavioral variable, fly ash reuse was determined by more diverse factors including economic and regulatory variables. This could be explained by material characteristics in relation to competing resources and the nature of reuse applications.     

Environmental sustainability assessment of food waste valorization options

Food waste can be valorized through different technologies, such as anaerobic digestion, incineration, and animal feed production. In this study we analyzed the environmental performance of two food waste valorization scenarios from a company of the retail sector in Belgium, through exergy analysis, exergetic life cycle assessment (ELCA), and a traditional life cycle assessment (LCA). In scenario 1 all food waste was considered to be valorized in an anaerobic digestion (producing electricity, heat, digestate and sorting the packaging material to be used as fuel for cement industry), while in scenario 2 a bread fraction was valorized to produce animal feed and a non-bread fraction was valorized in an anaerobic digestion (producing the same products on scenario 1, but in lower amounts). Scenario 2 was 10% more efficient than scenario 1 in the exergy analysis. For the ELCA and the single score LCA, scenario 2 presented lower environmental impacts than scenario 1 (32% and 26% lower, respectively). These results were mainly due to the avoided products from traditional supply chain (animal feed produced from agricultural products) and lower exergy loss at the feed production plant. Nevertheless, the high dry matter content of the bread waste played an important role on these results, therefore it should be pointed out that valorizing food waste to animal feed seems to be a better option only for the fractions of food waste with low water content (as bread waste).     

Quantitative sustainability assessment of remanufacturing waste reinforcing steel

Construction is a major contributor to the solid waste stream globally and various recycling strategies are being evaluated to recover valuable resources. As a novel strategy, remanufacturing waste reinforcing steel bar (rebar) pieces from concrete waste to produce nails was applied on an industrial scale to prove the technical feasibility, where a group of alternatives were developed based on commercially available industrial machinery. The calculated economic and environmental feasibility values are sufficiently high for industrial application, and the most appropriate remanufacturing technological alternative was identified. The sustainability equation was solved to find the social feasibility and overall remanufacturing sustainability index. Rebar waste remanufacturing has a high triple-bottom-line sustainability index of 0.885. Based on the proposed process, small remanufacturing companies can be developed, thereby aiding employment and human development by earning profit of 1904–8880 USD/day. The findings of this study are beneficial to decision makers in government and industry and are globally relevant because concrete waste is ubiquitous worldwide.     

The fate of heavy metals in green waste composting

It has long been known that heavy metals, when in high enough concentration, have the potential to be both phytotoxic and zootoxic. Heavy metals are frequently found as contaminants in green waste. Any such waste that is subsequently segregated for composting theoretically has the potential to retain that possible contamination. To date, there have been a limited number of publications addressing this issue. Most reports have concentrated on the types of heavy metals found in compost and their acceptable levels, rather than the fate of heavy metal contaminants throughout the composting process. This investigation was aimed to identify the fate of cadmium (Cd), copper (Cu), chromium (Cr), lead (Pb) and zinc (Zn) concentrations throughout a fourteen week composting cycle. The results of this study showed a general increase in the removal of Pb, Cu, Cr, and to a much smaller extent Zn, manifested by a decrease in their overall concentrations within the solid fraction of the final product, by 93, 49, 43, and 20 percent respectively. By contrast, there was no decrease in the overall concentration of Cd.     

Environmental fate of triasulfuron in soils amended with municipal waste compost

The amendment of soil with compost may significantly influence the mobility and persistence of pesticides and thus affect their environmental fate. Factors like adsorption, kinetics, and rate of degradation of pesticides could be altered in amended soils. The aim of this study was to determine the effects of the addition of compost made from source-separated municipal waste and green waste, on the fate of triasulfuron [(2-(2-chloroethoxy)-N-[[4-methoxy-6-methyl-1,3,5-triazin-2-yl)amino]carbonyl]benzenesulfonamide], a sulfonylurea herbicide used in postemergence treatment of cereals. Two native soils with low organic matter content were used. A series of analyses was performed to evaluate the adsorption and degradation of the herbicide in soil and in solution after the addition of compost and compost-extracted organic fractions, namely humic acids (HA), fulvic acids (FA), and hydrophobic dissolved organic matter (HoDOM). Results have shown that the adsorption of triasulfuron to soil increases in the presence of compost, and that the HA and HoDOM fractions are mainly responsible for this increase. Hydrophobic dissolved organic matter applied to the soils underwent sorption reactions with the soils, and in the sorbed state, served to increase the adsorption capacity of the soil for triasulfuron. The rate of hydrolysis of triasulfuron in solution was significantly higher at acidic pH and the presence of organic matter fractions extracted from compost also slightly increased the rate of hydrolysis. The rate of degradation in amended and nonamended soils is explained by a two-stage degradation kinetics. During the initial phase, although triasulfuron degradation was rapid with a half-life of approximately 30 d, the presence of compost and HoDOM was found to slightly reduce the rate of degradation with respect to that in nonamended soil.     

Modeling organic carbon dynamics and cadmium fate in long-term sludge-amended soil

A model is described that may help to resolve uncertainty and controversy over the long-term consequences of sludge applications to arable land, especially with regard to the effects of sludge adsorption characteristics on trace metal solubility and bioavailability (e.g., the sludge "time bomb" or sludge "protection" hypotheses). Mass balances of organic and inorganic material derived from sludge and crop residues are simulated. Each pool has a potentially different adsorption affinity for trace metals, and this leads to changes in the adsorption capacity of sludge-amended soil that influence leaching and crop uptake. Model simulations were compared with measured changes in organic carbon and ethylenediaminetetraacetic acid (EDTA)-extractable cadmium contents in a clay loam soil following 41 years of sludge applications. The model adequately reproduced the data, although discrepancies in the vertical distribution of Cd were attributed to the effects of macropore transport and root-uptake driven recirculation. A Monte Carlo sensitivity analysis demonstrated that the most important parameters affecting leaching and crop uptake were the Cd loading and parameters controlling adsorption, especially the partition coefficient for sludge-derived inorganic material and the exponent regulating the effect of pH on sorption. Scenario simulations show that no general conclusions can be drawn with respect to the validity of the sludge "time bomb" and sludge "protection" hypotheses. Either may occur, or neither, depending on three key system parameters: the ratio of sludge adsorption capacity to the initial adsorption capacity of the soil, the proportion of the sludge adsorption capacity contributed by the inorganic fraction, and the sludge Cd loading.     

Total site: wastewater minimization: Wastewater reuse and regeneration reuse

Analysis of technological wastewater streams in a refinery and petrochemical complex was carried out. Wastewater flowrates, temperatures, pH and pollutant contents were measured. Regarding the characteristics of the individual waters, possible connections between water outflows from the processes or process units and potential water consumers were determined. Possibilities to reduce the flowrate of technological wastewater with wastewater reuse or preliminary regeneration and reuse were found. The consumption of fresh water could be lowered by 11.2 m³/h, reducing the treatment system load and prolonging its residence time by 7%. The payback period for the changes proposed in the petrochemical plants is 6 months with annual savings of US$27 630. The payback period for the changes proposed in the refinery is 11 days with annual savings of US$15 500.     

Assessing the sustainability of water governance systems: the sustainability wheel

We present and test a conceptual and methodological approach for interdisciplinary sustainability assessments of water governance systems based on what we call the sustainability wheel. The approach combines transparent identification of sustainability principles, their regional contextualization through sub-principles (indicators), and the scoring of these indicators through deliberative dialogue within an interdisciplinary team of researchers, taking into account their various qualitative and quantitative research results. The approach was applied to a sustainability assessment of a complex water governance system in the Swiss Alps. We conclude that the applied approach is advantageous for structuring complex and heterogeneous knowledge, gaining a holistic and comprehensive perspective on water sustainability, and communicating this perspective to stakeholders.     

Governing sustainability: examining audits and compliance in a third-party-certified organic shrimp farming project in rural Indonesia

Drawing on a case study of an organic shrimp project in Indonesia, this paper provides a preliminary assessment of the use of third-party certification (TPC) to make shrimp aquaculture more environmentally sustainable in a rural setting in Indonesia. Specifically, I examine three processes of TPC: (1) the development of standards, (2) the communication of standards, and (3) the enforcement of standards. My research indicates that TPC is based on technoscientific norms and values and Western ideas of rationality. Thus, implementing TPC in rural settings in the global South may pose additional difficulties, resulting from cultural and structural differences. Consequently, TPC may not be able to be successfully implemented everywhere in the world, especially in the rural South, in its current form.     

Interactions of organic compounds with wastewater dissolved organic matter: role of hydrophobic fractions

The role of structural fractions of dissolved organic matter (DOM) from wastewater in the sorption process of hydrophobic organic compounds is still not clear. In this study, DOM from two wastewater treatment plants (Lachish and Netanya, Israel) was fractionated to hydrophobic acid (HoA) and hydrophobic neutral (HoN) fractions. The fractions were characterized and their sorptive capabilities for s-triazine herbicides and polycyclic aromatic hydrocarbons (PAHs) were studied. For all sorbates, the binding to the HoN fractions was much higher than to HoA fractions. The HoA fractions were more polar than the HoN fractions, containing a higher level of carboxylic functionalities. However the higher binding coefficients of atrazine (2-chloro-4-ethylamine-6-isopropylamino-s-triazine) and ametryn [2-(ethylamino)-4-isopropylamino-6-methyl-thio-s-triazine] obtained for the HoN fractions suggest that their sorption is governed by hydrophobic-like interactions rather than H bonding. The values of binding coefficients of PAHs measured for the HoN fractions were within the range reported for humic acids and much higher than other fractions, suggesting that this fraction plays an important role in the overall sorption of these compounds by DOM. Higher sorption coefficients were measured for the Netanya DOM sample containing higher level of hydrophobic fractions (HoA + HoN) than the Lachish DOM, suggesting that the sorption of hydrophobic organic compounds by DOM is governed by the level of these structural substances. The evaluation of mobility of organic pollutants by wastewater irrigation requires not only assessment of the total carbon concentration but also, more importantly, the content of the hydrophobic fractions.     

Amelioration of physical strength in waste foundry green sands for reuse as a soil amendment

To avoid increasing costs of landfill disposal, it has become increasingly important for U.S. foundries to identify beneficial reuses for the 8 to 12 million tons of waste foundry sand (WFS) generated annually. A major drawback to the reuse of some WFSs as a soil amendment is their high soil strength, under dry conditions, where root growth may be limited. Fifteen WFSs were analyzed for strength to rupture using lab-formed clods, exchangeable cations (Na, Mg, Ca), metal oxide concentration (Fe, Mn, Al, Si), cation exchange capacity (CEC), and % clay. Several WFS samples from gray iron foundries demonstrated high strength to rupture values (> 1.5 MPa), and could potentially restrict root growth in amended soils. The percentage of Na-bentonite exhibited a positive correlation (R(2) = 0.84) with strength to rupture values. When WFSs containing more Na-bentonite were saturated with 1 mol L(-1) Ca ions, strength values decreased by approximately 70%. Waste foundry sands containing less Na-bentonite were saturated with 1 mol L(-1) Na ions and exhibited a threefold increase in strength. Additions of gypsum (up to 9.6 g kg(-1) sand) to high strength waste foundry sands also caused decreases in strength. These results indicate that high strength WFSs have properties similar to hardsetting soils which are caused by high Na(+) clay content and can be ameliorated by the addition of Ca(2+).     

Sorption dynamics of organic and inorganic phosphorus compounds in soil

Phosphorus retention in soils is influenced by the form of P added. The potential impact of one P compound on the sorption of other P compounds in soils has not been widely reported. Sorption isotherms were utilized to quantify P retention by benchmark soils from Indiana, Missouri, and North Carolina when P was added as inorganic P (Pi) or organic P (beta-D-glucose-6-phosphate, G6P; adenosine 5'-triphosphate, ATP; and myoinositol hexaphosphate, IP6) and to determine whether soil P sorption by these organic P compounds and Pi was competitive. Isotherm supernatants were analyzed for pH and total P using standard protocols, while Pi and organic P compounds were assayed using ion chromatography. Under the controlled conditions of this study, the affinity of all soils for P sources followed the order IP6 > G6P > ATP > Pi. Each organic P source had a different potential to desorb Pi from soils, and the order of greatest to least Pi desorption was G6P > ATP > IP6. Glucose-6-phosphate and ATP competed more directly with Pi for sorption sites than IP6 at greater rates of P addition, but at the lesser rates of P addition, IP6 actually desorbed more Pi. Inositol hexaphosphate was strongly sorbed by all three soils and was relatively unaffected by the presence of other P sources. Decreased total P sorption due to desorption of Pi can be caused by relatively small additions of organic P, which may help explain vertical P movement in manured soils. Sorption isotherms performed using Pi alone did not accurately predict total P sorption in soils.     

Auditing non-hazardous wastes from golf course operations: moving from a waste to a sustainability framework

This paper provides non-hazardous solid waste audit procedures and bench mark audit data for golf courses (GCs). The paper also demonstrates the narrow scope of solid waste audit data, and the need to move towards a broader auditing scope such as that contained in sustainability auditing frameworks. A case study of Clear Lake Golf Course, located in southwestern Manitoba, Canada was completed. Annual waste generation rates at the GC were estimated to be 46.2 tonnes/year with 83% of this material compostable. Grass clipping material generated from the putting greens accounted for 79% of the waste stream. The GC achieved a solid waste diversion rate of 81% (waste generated not destined for landfill per total waste material generated). A future, realistic target of 97% diversion was also identified. The 7 day audit period was found to be unsuitable for estimating grass clipping generation rates. Implementation of a broader sustainability framework for future audits will harmonize many existing management functions such as solid waste auditing, waste characterizations, pollution prevention, green procurement, customer satisfaction, and the efficiency of the operations.     

The reuse of municipal solid waste incinerator fly ash slag as a cement substitute

The results of the treatment of fly ash from a municipal solid waste incinerator (MSWI) by melting are described, and the safety and the effectiveness of using the slag produced by this melting treatment are studied. The properties of the MSWI fly ash slag were analyzed, to evaluate the feasibility of its reuse as a substitute for part of the cement required in mortar preparation. This MSWI fly ash slag was found to be comprised mainly of SiO₂ and CaO, which can be substituted for up to 20% of the cement content in mortar, without sacrificing the quality of the resultant concrete. In fact, the concrete thus produced has greater compressive strength, 10% higher than that without the substitution. The setting time of the fresh mortar becomes lengthens as increasing amounts of cement are replaced; while the spread flow value increases with the increasing percentage of cement substitution. X-ray diffraction analysis reveals that when the W/C=0.38 and the curing AGE=28 days, the crystal patterns in the mortar samples, prepared with different amounts of cement having been replaced by MSWI fly ash slag are similar. According to the results of the toxic characteristic leaching procedure analysis, MSWI fly ash slag should be classified as general non-hazardous industrial waste, that meets the effluent standard. Therefore, the reuse of MSWI fly ash slag is feasible, and will not result in pollution due to the leaching of heavy metals.     

Volatile organic compounds in the unsaturated zone from radioactive wastes

Volatile organic compounds (VOCs) are often comingled with low-level radioactive wastes (LLRW), but little is known about subsurface VOC emanations from LLRW landfills. The current study systematically quantified VOCs associated with LLRW over an 11-yr period at the USGS Amargosa Desert Research Site (ADRS) in southwestern Nevada. Unsaturated-zone gas samples of VOCs were collected by adsorption on resin cartridges and analyzed by thermal desorption and GC/MS. Sixty of 87 VOC method analytes were detected in the 110-m-thick unsaturated zone surrounding a LLRW disposal facility. Chlorofluorocarbons (CFCs) were detected in 100% of samples collected. Chlorofluorocarbons are powerful greenhouse gases, deplete stratospheric ozone, and are likely released from LLRW facilities worldwide. Soil-gas samples collected from a depth of 24 m and a horizontal distance 100 m south of the nearest waste-disposal trench contained >60,000 ppbv total VOCs, including >37,000 ppbv CFCs. Extensive sampling in the shallow unsaturated zone (0-2 m deep) identified areas where total VOC concentrations exceeded 5000 ppbv at the 1.5-m depth. Volatile organic compound concentrations exceeded background levels up to 300 m from the facility. Maximum vertical diffusive fluxes of total VOCs were estimated to be 1 g m yr. Volatile organic compound distributions were similar but not identical to those previously determined for tritium and elemental mercury. To our knowledge, this study is the first to characterize the unsaturated zone distribution of VOCs emanating from a LLRW landfill. Our results may help explain anomalous transport of radionuclides at the ADRS and elsewhere.     

Management factors affecting ammonia volatilization from land-applied cattle slurry in the Mid-Atlantic USA

Ammonia (NH3) volatilization commonly causes a substantial loss of crop-available N from surface-applied cattle slurry. Field studies were conducted with small wind tunnels to assess the effect of management factors on NH3 volatilization. Two studies compared NH3 volatilization from grass sward and bare soil. The average total NH3 loss was 1.5 times greater from slurry applied to grass sward. Two studies examined the effect of slurry dry matter (DM) content on NH3 loss under hot, summer conditions in Maryland, USA. Slurry DM contents were between 54 and 134 g kg(-1). Dry matter content did not affect total NH3 loss, but did influence the time course of NH3 loss. Higher DM content slurries had relatively higher rates of NH3 volatilization during the first 12 to 24 h, but lower rates thereafter. Under the hot conditions, the higher DM content slurries appeared to dry and crust more rapidly causing smaller rates of NH3 volatilization after 12 to 24 h, which offset the earlier positive effects of DM content on NH3 volatilization. Three studies compared immediate incorporation with different tillage implements. Total NH3 loss from unincorporated slurry was 45% of applied slurry NH4+-N, while losses following immediate incorporation with a moldboard plow, tandem-disk harrow, or chisel plow were, respectively, 0 to 3, 2 to 8, and 8 to 12%. These ground cover and DM content data can be used to improve predictions of NH3 loss under specific farming conditions. The immediate incorporation data demonstrate management practices that can reduce NH3 volatilization, which can improve slurry N utilization in crop-forage production.     

Biological degradation of some organic compounds involved in the paper industry

An evaluation of the biodegradation by aerobic microorganisms was investigated for some organic compounds occurring in paper manufacturing technology. Lines of biodegradation for nine organic compounds, as a percentage removal of chemical oxygen demand (COD), were detected over seven days incubation. The results of the biodegradability test clearly revealed that some of the organic compounds under investigation were highly biodegradable while others ranked from fairly biodegradable to non-biodegradable. Significant biodegradation results were recorded as COD removal, for anti-coating ester (95.0 percent), Basoplast 200D (85.3 percent) and Basoplast PR 8050 (87.6 percent). The bleaching agent (formamidin-sulfinic acid), Ukanol BSA and Solidurit KM demonstrated moderate biodegradation with results of 62.1 percent, 76.2 percent and 69.8 percent, respectively. Poor biodegradation results for Hedifix M/35 (12.7 percent), Basazol Orange (34.9 percent) and Basazol Brown (29.0 percent) were recorded. Accordingly, appropriate precautions should be taken into consideration when applying these compounds to paper manufacturing processes.