Identification of Pollution Source of Cadmium in Soil. Application of Material Flow Analysis and A Case Study in Taiwan (11 pp)

Background Since the 1970s, at least 200 hectares (ha) of farmland has been polluted by the heavy metal cadmium (Cd).Consequently, the Cd pollution has led to contaminate the rice production and caused acute social panic. According to the recent investigation results performed by the Taiwan Environmental Protection Administration (TEPA), it is indicated that most of the Cd pollution incidents in Taiwan resulted from the wastewater discharge of stearate Cd factories. To prevent the Cd pollution incidents from spreading, the TEPA has either forced these factories to close down or assisted them in improving their production processes since the 1980s. Unfortunately, accidental incidents of Cd pollution still emerge in an endless stream, despite the strict governmental controls placed on these questionable factories. Whether this pollution has resulted from undetected or hidden pollution sources stemming from two decades ago or comes from some new source, will be an outstanding issue. Therefore, this study attempts to identify the pollution sources of Cd in soil in Taiwan as well as to find the solution to the above-mentioned, outstanding issue by way of a methodology termed Material Flow Analysis (MFA). Method logy. The MFA has proved to be a useful tool on providing quantitative information of the flow of substances through an economic to an environmental system. Based upon the supply-and-demand theory of MFA, researchers have successfully conducted an overview of the use of materials in many industries, the construction industry being one of these. Therefore, this study tries to establish a set of analytical processes by way of MFA for identifying the pollution source of Cd in soil in Taiwan. In addition, the spirit of Life Cycle Analysis (LCA) technique was also employed to identify the materials, and products should be ignored as a crucial pollution source in this study. Results and Discussion According to the MFA methodology applied in this study and on the basis of related studies performed by Taiwanese governmental authorities, we arrive at the following analysis results: (1) the total amount of Cd from the economic perspective of material and product flow was approximately 441.2 tons; (2) the wastewater directly discharged into irrigation water can be concluded to be the major pollution route of Cd in farmland soil in Taiwan; (3) material plastic stabilizer (cadmium oxide, CdO), Zn-Pd compounds and Cu compounds should be the crucial pollution sources to contaminate environment through the route of wastewater in Cd flow analysis; (4) the crucial pollution sources to contaminate environment through the route of wastewater in Cd flow analysis were five factories, Coin, Jili, Taiwan Dye, Guangzheng and Mingguan, and they were all categorized as stearate Cd industries; (5) the typical source of the Cd pollution in soil in Changhua County through the pollution route of wastewater should be the metal surfacing process industries. Conclusions This study proved that MFA can be a good tool for identifying Cd flow as well as for recognizing the crux of the problem concerning incidents of Cd pollution. This study led to the conclusion that the causal relationship between farmland pollution caused by Cd and stearate Cd factories in Taiwan seemed quite close by way of MFA methodology. In addition, this study also found that the wastewater discharged from a single metal surfacing process factory will not cause remarkable farmland pollution. However, the wastewater simultaneously discharged from a group of pollution factories can result in a significant pollution incident. Recommendations and Outlook This case study is only a small contribution to the understanding of the toxic material flow related to Cd in the environment. This study recommends that Taiwanese governmental authorities should not deal with problems on an ad hoc basis, but should instead deal with Cd pollution problems overall employing control measures. Finally, the more accurate information or data we can collect, the more reliable results we can identify. Therefore, the quality and quantity of related data used in this MFA model should be closely scrutinized in order to ensure the most correct and comprehensive investigation on the toxic material flow.     

福州市蔬菜基地土壤重金属和多环芳烃的含量及其与土壤磁性指标的关系

蔬菜基地土壤污染状况与人类健康有着密切的关系。本研究对福州市蔬菜基地土壤中6种重金属和15种美国环境保护总署（US EPA）优控的多环芳烃（PAHs）污染状况进行了调查,并分析了污染物含量与土壤磁性指标间的关系。结果表明,土壤中重金属平均含量为Zn 147.0 mg·kg-1、Pb 55.0 mg·kg-1、Cu 45.5 mg·kg-1、Cr 21.3 mg·kg-1、As 16.0 mg·kg-1、Cd 0.6 mg·kg-1;PAHs的总量范围为324.3~1 838.6 μg·kg-1。Cu含量和PAHs总量与土壤磁化率χ都具有显著的相关性（pχfd的结果分析表明,土壤中PAHs主要来源于石油泄漏和生物质的燃烧;重金属来源复杂,为混合来源,包括人类活动排放和成土母质固有含量。污染评价结果表明,土壤中Cr和As的含量都未超标,Cu、Zn和Cd的含量均超标;参考荷兰土壤修复标准中的目标值, PAHs含量超标的土壤为11.1%,而参照我国土壤污染状况评价技术规定,PAHs含量超标的土壤为22.2%。     

Pilot study on road traffic emissions (PAHs,heavy metals) measured by using mosses in a tunnel experiment in Vienna,Austria

BACKGROUND, AIMS AND SCOPE: Over the last few years there has been extensive research for new indicators providing information about deposition resulting from road traffic and tunnel experiments received special attention in emission research. Mosses have been used for the estimation of atmospheric heavy metal and PAH depositions for more than three decades, although they were used only a few times for estimating ambient air pollution caused by traffic. In the current study, the suitability of using a moss species for monitoring road traffic emissions inside a tunnel was evaluated. This was a first-time ever attempt to use plants (mosses) as bioindicators in a tunnel experiment. Specifically, two relevant questions were examined: 1) Do mosses accumulate toxic substances derived from road traffic emissions under the extremely adverse conditions which can be found in a tunnel, and 2) Which substances can mainly be attributed to road traffic emissions and therefore be taken as efficient and reliable indicators for motor vehicles? METHODS: For the first time a biomonitor (the moss species Hylocomium splendens (Hedwig) B.S.G.) was used in a road tunnel experiment to analyse emissions from road traffic. Moss samples were exposed for four weeks in wooden frames (size 10 cm x 10 cm), covered by a thin plastic net with a mesh size of 1 cm x 1 cm. 17 elements, mainly heavy metals, and the 16 EPA-PAHs together with coronene were analysed by ICP-AES, AAS and GC-MSD. RESULTS: Enrichment factors, calculated by comparing post-experiment concentrations to those of a background site, were high for most PAHs, especially benzo(g,h,i)perylene (150.7), coronene (134.7), benzo(a)anthracene (125.0), indeno(1,2,3-c,d)pyrene (79.8), chrysene (78.1), pyrene (69.6) and benzo(b)-fluoranthene (67.4), and among the other elements for Sb (73.1), Mo (59.6), Cr (33.9), As (24.1), Cu (19.6), and Zn (17.1). All these substances can thus be taken as indicators for road traffic pollution. Concentrations were also significantly higher in the tunnel mosses for all investigated substances than along busy roads outside tunnels. Cluster analysis revealed groups of substances which could sensibly be attributed to various sources (abrasion processes, Diesel combustion) and enrichment in the various particle size classes. DISCUSSION: The extreme high concentrations in the analysed moss samples from inside the tunnel were due to higher concentrations in the ambient tunnel air, and the fact that already deposited chemical substances are not lost by rain, as well as efficient uptake capacities even under the extremely adverse conditions in a tunnel. In accordance with previous studies our results suggest that PAHs are better indicators for emissions from the burning process than heavy metals. CONCLUSIONS: As in open fields, mosses are suitable indicators for monitoring traffic emissions in tunnels. In addition to biomonitoring in open fields, in tunnel experiments mosses are even better indicators, because the confounding effects of other sources of pollution and the 'noise' in the accumulation process (e.g. washout through wet deposition) are minimised. The results of our study demonstrate the usefulness of mosses for surveying heavy metals and PAH emissions and deposition arising from road traffic sources, even under the extremely adverse conditions of the tunnel environment. RECOMMENDATION: It can be considered that biomonitors like mosses are a suitable alternative to technical particle filters inside tunnels. They are easy to handle, low in costs and valuable information regarding traffic emissions can be obtained. PERSPECTIVE: The results of this pilot-study proved the feasibility of the method, however, should be corroborated by further investigations based on a sample set that allows for generalization of the findings and might even include other moss species. A comparison of technical measurements with the biomonitoring method could lead to a more general acceptance of the results.     

Successful Treatment of Low PAH-Contaminated Sewage Sludge in Aerobic Bioreactors (7 pp) *

Background, Aims and Scope Polycyclic Aromatic Hydrocarbons (PAHs) are known for their adverse and cumulative effects at low concentration. In particular, the PAHs accumulate in sewage sludge during wastewater treatment, and may thereafter contaminate agricultural soils by spreading sludge on land. Therefore, sludge treatment processes constitute the unique opportunity of PAH removal before their release in the environment. In this study, the ability of aerobic microorganisms to degrade light and heavy PAHs was investigated in continuous bioreactors treating trace-level PAH-contaminated sludge. Methods Several aerobic reactors were operated under continuous and perfectly mixed conditions to simulate actual aerobic sludge digesters. Three sterile control reactors were performed at 35°C, 45°C or 55°C to assess PAH abiotic losses under mesophilic and thermophilic conditions. Three biological reactors were also operated at 35°C, 45°C or 55°C. Furthermore, 250 mM methanol were added in an additional mesophilic reactor (35°C). All reactors were fed with long-term PAH-contaminated sewage sludge, and PAH removal was assessed by inlet/outlet mass balance. In this study, PAH compounds ranged from 2 to 5-unsubstituted aromatic rings, i.e. respectively from Fluorene to Indeno(123cd)pyrene. Results and Discussion Significant abiotic losses were observed for the lightest PAHs (fluorene, phenanthrene and anthracene), while biodegradation occurred for all PAHs. More than 80% of the lightest PAHs were removed. Biodegradation rates inversely correlated with the increasing molecular weight, and seemed limited by the low bioavailability of the heaviest PAHs (only 50% of removal). The enhancement of PAH bioavailability by increasing the process temperature or adding methanol was tested. A temperature increase from 35°C to 45°C and then to 55°C significantly enhanced the biodegradation of the heaviest PAHs from 50% to 80%. However, high abiotic losses were observed for all PAHs at 55°C, which was attributed to volatilization. Optimal conditions were found at 45°C considering the low abiotic losses and the high PAH biodegradation rates. Similar performances were achieved by addition of methanol in the sludge. It was concluded that increasing temperatures or addition of methanol favored PAH diffusion from solids to an aqueous compartment, and enhanced their bioavailability to PAH-degrading microorganisms. Conclusion In this study, the use of long-term acclimated aerobic ecosystems showed the high potential of aerobic microorganisms to degrade a wide range of PAHs at trace levels. However, PAH biodegradation was likely controlled by their low bioavailability. Two aerobic processes have been finally proposed to achieve efficient decontamination of sewage sludge, at 45°C or in the presence of methanol. The PAH concentrations in reactor outlet were lower than the French requirements, and allow the treated sludge to be spread on agricultural land. Recommendations and Outlook The two proposed aerobic processes used physical or chemical diffusing agents. The global ecological impact of using the latter agents for treating trace level contamination must be considered. Since methanol was completely removed during the process, no additional harm is expected after treatment. However, an increase of temperature to 45°C could drastically increase the energy demand in full-scale plants, and therefore the ecological impact of the process. Moreover, since bioavailability controls PAH biodegradation, efficiency of the processes could also be influenced by the hydraulic parameters, such as mixing and aeration rates. Further experimentations in a pilot scale are therefore recommended, as well as a final assessment of the global environmental benefit of using such aerobic processes in the bioremediation of trace level compounds. - Abbreviations (PAHs): Ant – anthracene; B(a)A – benzo(a)anthracene ; B(b)F – benzo(b)fluoranthene; B(k)F – benzo(k)fluoranthene; B(ghi)P – benzo(g,h,i)perylene; B(a)P – benzo(a)pyrene; Chrys – chrysene; DB – dibenzo(a,h)anthracene; Fluor – fluoranthene; Fluo - fluorene; Ind – indeno(1,2,3-c,d)pyrene; Phe - phenanthrene; Pyr – pyrene - * The basis of this peer-reviewed paper is a presentation at the 9th FECS Conference on 'Chemistry and Environment', 29 August to 1 September 2004, Bordeaux, France.     

我国环境介质中多环芳烃的分布及其生态风险

持久性有机污染物多环芳烃(PAHs)在我国环境介质中广泛分布,美国EPA规定的16种.优先控制多环芳烃大多在我国大气、水体、沉积物、土壤和生物体内检出.总结了我国环境介质中PAHs污染水平及特点,分析了其存在的环境风险.我国大气中PAHs污染较重,尤其是北方.水体已普遍受PAHs污染,其中部分水体污染严重;沉积物多环芳烃污染大多处于低生态风险水平,但沉积记录研究表明有越来越严重的趋势.我国土壤和生物体PAHs含量较低,污染生态风险较小.部分区域蔬菜中PAHs含量较高,存在不可忽视的生态风险.     

异位类Fenton化学氧化在多环芳烃污染场地修复中的应用

多环芳烃作为土壤的主要污染源之一,其修复技术的研究对土壤可持续利用具有重要的意义;但目前的研究主要基于室内小试实验,对具体修复技术在实际现场中的应用少有报道。基于上海青浦区西虹桥沈海高速东侧17-02污染场地的工程实践,结合室内实验,详细地介绍了原场异位类Fenton化学氧化修复多环芳烃污染土壤施工工艺。处理结果表明：以柠檬酸为催化助剂的类Fenton化学氧化能够有效地处理场地污染土壤中的苯并(a)蒽、苯并(a)芘、苯并(b)荧蒽和茚并(1, 2, 3-cd)芘等超标污染物;修复后场地土壤各项物理指标相比修复前变化较小;同时,类Fenton氧化反应放热,修复过程中土壤微生物能够将有机柠檬酸快速降解,有效降低了化学氧化对土壤pH的影响。     

Utilising the Synergy between Plants and Rhizosphere Microorganisms to Enhance Breakdown of Organic Pollutants in the Environment (15 pp)

Background Phytoremediation is a promising technology for the cleanup of polluted environments. The technology has so far been used mainly to remove toxic heavy metals from contaminated soil, but there is a growing interest in broadening its applications to remove/degrade organic pollutants in the environment. Both plants and soil microorganisms have certain limitations with respect to their individual abilities to remove/breakdown organic compounds. A synergistic action by both rhizosphere microorganisms that leads to increased availability of hydrophobic compounds, and plants that leads to their removal and/or degradation, may overcome many of the limitations, and thus provide a useful basis for enhancing remediation of contaminated environments.Main Features The review of literature presented in this article provides an insight to the nature of plant-microbial interactions in the rhizosphere, with a focus on those processes that are relevant to the breakdown and/or removal of organic pollutants. Due consideration has been given to identify opportunities for utilising the plant-microbial synergy in the rhizosphere to enhance remediation of contaminated environments.Results and Discussion The literature review has highlighted the existence of a synergistic interaction between plants and microbial communities in the rhizosphere. This interaction benefits both microorganisms through provision of nutrients by root exudates, and plants through enhanced nutrient uptake and reduced toxicity of soil contaminants. The ability of the plant-microbial interaction to tackle some of the most recalcitrant organic chemicals is of particular interest with regard to enhancing and extending the scope of remediation technologies.Conclusions Plant-microbial interactions in the rhizosphere offer very useful means for remediating environments contaminated with recalcitrant organic compounds.Outlook A better knowledge of plant-microbial interactions will provide a basis for improving the efficacy of biological remediations. Further research is, however, needed to investigate different feedback mechanisms that select and regulate microbial activity in the rhizosphere.     

Polycyclic Aromatic Hydrocarbon (PAH) Contamination of Surface Sediments from Port Dickson,Malaysia: Distribution,Sources and Ecological Risk Assessment

Distribution and sources of 16 parent polycyclic aromatic hydrocarbons (PAHs) were investigated in surface sediments from Port Dickson, Malaysia. Total PAHs varied from 481.3 to 976.6 with a mean value of 679.3 ng g^?1 dry weight, which can be classified as moderate level of pollution. The toxic assessment suggested that the PAHs in sediments will not cause immediately adverse biological effects. Both petrogenic and pyrogenic PAHs were recorded in the study area with dominance of pyrogenic. The authors believe that effective monitoring and implementation of environmental regulations have resulted in a tremendous improvement of sediment quality in the Malaysian aquatic ecosystem.     

燃煤电厂多环芳烃的生成与控制

多环芳烃 (PAHs)对人体健康的危害极大。本文综述了燃煤电厂煤燃烧过程中多环芳烃的生成机理 (直接释放、热解合成和高温缩合机理 )和影响因素 (煤种、温度、锅炉负荷、过剩空气系数、停留时间、钙硫比和一次风 /二次风比 ) ,在此基础上介绍了煤燃烧过程中多环芳烃的各种控制技术和方法     

西安市大气中多环芳烃的季节变化及健康风险评价

对西安市2009年6月-2010年5月空气中的总悬浮颗粒（TSP）和气态样品进行了连续采样,利用GC—MS对16种PAHs进行分析。∑PAHs浓度（气相＋颗粒相）范围为39．93～1032．46ng／m^3,平均值为197．34ng／m^3;其中,冬季大气中∑PAHs浓度最大,相对浓度的范围为31．21％～72．98％,而夏季的浓度最小;检测出16种2～6环的PAHs,其中以3—4环为主。利用特征分子比值法和因子分析进行源解析,发现研究区PAHs的主要来源为燃煤和机动车尾气排放。通过苯并（a）芘（BaP）等效毒性（BEQ）和苯并（a）芘等效致癌浓度（BaPE）进行健康风险评价,结果显示,西安大气中PAHs的毒性具有明显的季节差异,特别是秋季和冬季大气中PAHs对人类的健康存在较大的潜在威胁。     

生物柴油基微乳液的制备及其对钢铁厂多环芳烃污染土壤的修复性能

针对场地土壤中高浓度多环芳烃较难去除的问题,利用微乳液具有界面张力低、增溶能力强和体系稳定的特点,制备了污染土壤淋洗修复剂。采用表面活性剂、助表面活性剂、生物柴油为主要组分制备微乳液,优化微乳液最佳组分配比及制备条件,并比较表面活性剂、复配表面活性剂、生物柴油和微乳液等不同类型淋洗剂对钢铁厂污染土壤中多环芳烃的去除效果。结果表明,最佳微乳液组分及pH条件为：7.7% Tween-80、7.7% TX-100、15.4%正丁醇、20.5%生物柴油、pH=7。在不同类型的淋洗剂中,微乳液淋洗剂对多环芳烃的去除率最高(89.7%),显著高于其他类型淋洗剂的效果。多环芳烃的去除率与淋洗剂和土壤的液固比、洗脱振荡时间等有关,确定的微乳液最佳修复条件为：液固比为4∶1、洗脱振荡时间为8 h。按混合表面活性剂与生物柴油比为6∶4制备的微乳液洗脱效果最佳。本研究结果可为高效去除污染土壤中多环芳烃打下基础。     

Polycyclic aromatic hydrocarbons in crude oil-contaminated soil: A two-step method for the isolation and characterization of PAHs

A two-step analytical method is developed for the isolation and characterization of polycyclic aromatic hydrocarbons (PAHs) in crude oil contaminated soil. In the first step, those crude oil components were isolated which are easily mobilized with water from the contaminated soil (determination of groundwater pollution potential). In the second step, the fraction containing the remaining crude oil compounds was extracted using toluene. After the cleanup of the fractions, both fractions were analyzed using high-performance liquid chromatography (HPLC). The HPLC of the toluene extracted fraction shows that along with the sixteen priority pollutants from the US-EPA list, many other polycyclic aromatic hydrocarbons (PAHs) are present as well. It is evident from the chromatograms that a significant amount of PAHs are present as is also the case in the fractions eluted by water. The described method allows the determination of total organic pollutants from crude oil, some of them being potential groundwater contaminants. The major part of the total pollutants could not be mobilized by water and therefore remains in the soil, which was extracted in the second step.     

ClO2-CuO@蒙脱土催化氧化降解土壤中的蒽

采用尿素水解法制备了CuO-蒙脱土复合材料,XRD和 IR表明制备的CuO-蒙脱土复合材料同时存在CuO和蒙脱土两种物质。TEM表明对CuO-蒙脱土复合材料中CuO纳米颗粒的直径为4~5 nm,均匀分散在蒙脱土片层上。使用CuO-蒙脱土作为二氧化氯（ClO2）氧化的催化剂,研究了ClO2-CuO@蒙脱土催化氧化降解土壤中蒽的效果。结果表明,土壤中蒽污染物浓度为89.8 mg·kg-1时,最佳条件为25℃、水土比为3、污染土壤初始pH 7、ClO2用量为1.0 mol·kg-1、CuO-蒙脱土用量为1 g·kg-1、反应时间30 min,此时,土壤中蒽的降解率可达到90%以上。ClO2-CuO@蒙脱土催化氧化降解土壤中蒽的反应动力学对ClO2浓度符合一级反应动力学,反应过程中产生活性·OH,提高了蒽降解的效率。     

Distribution of Polycyclic Aromatic Hydrocarbons (PAHs) in Sediment Cores of Selected Creeks in Delta State,Nigeria

The spatial and seasonal distribution and concentrations of polycyclic aromatic hydrocarbons (PAHs) were investigated in core sediments of Ubeji, Ifie, and Egbokodo creeks in the Niger Delta, Nigeria. A total of 222 core sediment samples were collected during the wet season (August 2010) and the dry season (January 2011). The samples were dried, Soxhlet extracted, fractionated, and injected into a gas chromatograph with flame ionization detector (GC-FID). The concentrations of PAHs ranged from not detected to 2,654 μg/kg (wet season) and not detected to 3,513 μg/kg (dry season). In general, the concentrations of PAHs for a number of stations in this study are comparable to sites with high anthropogenic activities in the Niger Delta. The toxicity risk assessment based on the total BaP equivalent quotient of the seven carcinogenic PAHs (BaA, Chry, BbF, BkF, BaP, DBA, and Iper) was 97.416 μg/kg and did not exceed the method B cleanup level for benzo(a)pyrene (137 μg/kg), according to toxic equivalency factors, which implied that PAHs in sediments of the present study currently have minimal adverse effects. This study provided information on the concentrations and profiles of PAHs sediment cores, which is useful for source diagnosis, environmental quality management, contamination history, and environmental forensic studies.     

Source Apportionment and Identification of Polycyclic Aromatic Hydrocarbons (PAHs) in Sediment Cores of Selected Creeks in Delta State,Nigeria

Polycyclic aromatic hydrocarbons (PAHs) seasonal variation and sources in Ubeji, Ifie, and Egbokodo Creeks of the Niger Delta, Nigeria, were predicted using diagnostic ratios (DRs) of parent PAHs (Phe/Phe + Ant; Flu/Flu + Pyr; BaA/BaA + Chry, and Ind/Ind + BghiP) and principal component analysis (PCA). A total of 222 sediment core samples were collected during the wet (August 2010) and the dry seasons (January 2011). The samples were dried and Soxhlet extracted; sample extracts were fractionated and analyzed by gas chromatography/flame ionization detection (GC/FID) to identify individual PAHs. The diagnostic PAH ratios revealed that PAHs in the sediment cores at the three creeks, in both seasons, mainly stemmed from the combustion process (pyrogenic sources). Principal component analysis further confirmed that wood-burning, coal combustion, diesel, gasoline-powered vehicular emissions, and petroleum combustion were the dominant contributors of PAHs sources at the sampling location. This study provided information on the origin and sources of PAHs in sediment cores, which may be useful for regulatory actions, environmental quality management, contamination history, and environmental forensic studies.     

Uptake of PAHs into polyoxymethylene and application to oil-soot (lampblack)-impacted soil samples

Polyoxymethylene (POM) is a polymeric material used increasingly in passive sampling of hydrophobic organic contaminants such as PAHs and PCBs in soils and sediments. In this study, we examined the sorption behavior of 12 PAH compounds to POM and observed linear isotherms spanning two orders of magnitude of aqueous concentrations. Uptake kinetic studies performed in batch systems for up to 54 d with two different volume ratios of POM-to-aqueous phase were evaluated with coupled diffusion and mass transfer models to simulate the movement of PAHs during the uptake process and to assess the physicochemical properties and experimental conditions that control uptake rates. Diffusion coefficients of PAHs in POM were estimated to be well correlated with diffusants' molecular weights as D(POM) proportional, variant(MW)(-3), descending from 2.3 x 10(-10) cm(2) s(-1) for naphthalene to 7.0 x 10(-11) cm(2) s(-1) for pyrene. The uptake rates for PAHs with log K(ow)<5.8 were controlled by the POM phase and the hydrophobicity of PAH compounds. For more hydrophobic PAH compounds, the aqueous boundary layer played an increasingly important role in determining the overall mass transfer rate. The POM partitioning technique was demonstrated to agree well with two other procedures for measuring PAH soil-water distribution coefficients in oil-soot (lampblack) containing soil samples.     

柴油机排放多环芳香烃气/颗粒相分配研究

为了对柴油机排放PAHs在气相和颗粒相中的分配进行研究,采用了滤膜串联＂PUF/XAD-2/PUF＂吸附柱的方法采集柴油机排气中的气相和颗粒相PAHs,使用程序升温挥发（PTV）技术结合气相色谱-质谱联用（GC-MS）方法对PAHs进行了定性和定量分析。所用分析方法重复性的相对标准偏差（RSD）低于6.1%,检出限范围...     

小尺度水平上植被格局对城市绿地土壤污染物累积的影响

小尺度水平上土壤污染物累积特征不仅与人们的生活直接相关,与社区环境管理和园林规划也有密切联系。选择北京市五环内具有不同植被格局(围绕式、行列式、混合式和群点式)的典型居民区为研究对象,通过小区内绿地的多点布点,调查分析表层土壤中的7种重金属元素(Cr、Ni、Cu、Zn、Cd、Pb、Mn)和16种优先控制多环芳烃(PAHs)的浓度;探究小尺度水平上,植被格局对绿地土壤重金属及多环芳烃累积的影响。结果表明：Cu、Zn、Cd和Pb为主要的重金属污染物;居民区土壤中,16种多环芳烃总量(Σ₁₆PAHs)的浓度为88.1~2 844 μg·kg⁻¹,其主要来源于煤炭燃烧而非石油及其产物燃烧;行列式植被格局的绿地土壤中,主要重金属和PAHs污染物的浓度分布较为分散,高浓度污染物也往往出现在该类植被格局的土壤中;而群点式植被格局土壤中,主要重金属污染物以及本地指示性多环芳烃Ant、BaA和BaP的浓度中位值都较其他3种植被格局低。对行列式植被格局的小区进行土壤质量调查时,需要采集较多的样品数量才能获得代表性污染物浓度;同时,行列式植被格局有利于对污染物的截获,使绿地土壤起到吸纳污染物的作用,而群点式植被格局的绿地土壤环境质量较好,但是不利于发挥吸纳污染物的生态功能。     

Spatio-Temporal Distribution of Polycyclic Aromatic Hydrocarbons (PAHs) in Atmospheric Air of Tamil Nadu,India, and Human Health Risk Assessment

This study analyzed the seasonal distribution and the possible sources of polycyclic aromatic hydrocarbons (PAHs) in the atmospheric environment of Tamil Nadu, India. Passive air sampling was performed at 32 locations during the period from April 2009 to January 2010, and PAHs were quantified using a gas chromatograph-mass spectrometer. Analysis showed that the concentrations of PAHs were in the range of 5–47.5 ng/m³ with uniform distribution in urban areas in all seasons. Pre-monsoon season showed the highest cumulative concentration of PAHs in both agricultural and coastal areas. Among PAHs, phenanthrene, fluoranthene, and pyrene levels were found to be predominant in all the samples, contributing up to 36%, 35.5%, and 24.5% of total PAHs, respectively. The signature of the PAHs obtained through diagnostic ratio and principal component analysis revealed that diesel emissions was the probable source of PAHs in all locations. Based on Word Health Organization guidelines, the human lung cancer risk due to observed level of PAH concentration (i.e., PAHs exposure) is meager. However, the risk is predicted to be more in the coastal area during summer (18 individuals among 0.1 million people). To the knowledge of these authors, this report is the first on the seasonal analysis of PAHs using passive air sampling in India.     

Seasonal and spatial occurrence and distribution of atmospheric polycyclic aromatic hydrocarbons (PAHs) in rural and urban areas of the North Chinese Plain

Passive air sampling (PAS) was employed to study the occurrence of gaseous and particle-bound PAHs in the North Chinese Plain. The averaged concentrations of gaseous and particle-bound PAHs were 485 ± 209 ng/m³ and 267 ± 161 ng/m³, respectively. The PAHs concentrations at urban sites were generally higher than those at rural ones with ratios <1.5 in spring, summer and fall, but differences between them were not significant for the wintertime and annually averaged concentrations. This urban-rural distribution pattern was related to the PAHs emission sources. PAHs spatial variation can be partially (49%) explained by emission with a simple linear regression method. Both the gaseous and particle-bound PAHs were highest in winter and lowest in summer, with winter/summer ratios of 1.8 and 8, respectively. Emission strength was the most important factor for the seasonality.