Extraction of soil solution by drainage centrifugation—effects of centrifugal force and time of centrifugation on soil moisture recovery and solute concentration in soil moisture of loess subsoils

The solute concentration in the subsoil beneath the root zone is an important parameter for leaching assessment. Drainage centrifugation is considered a simple and straightforward method of determining soil solution chemistry. Although several studies have been carried out to determine whether this method is robust, hardly any results are available for loess subsoils. To study the effect of centrifugation conditions on soil moisture recovery and solute concentration, we sampled the subsoil (1.5–3.0 m depth) at commercial farms in the loess region of the Netherlands. The effect of time (20, 35, 60, 120 and 240 min) on recovery was studied at two levels of the relative centrifugal force (733 and 6597g). The effect of force on recovery was studied by centrifugation for 35 min at 117, 264, 733, 2932, 6597 and 14,191g. All soil moisture samples were chemically analysed. This study shows that drainage centrifugation offers a robust, reproducible and standardised way for determining solute concentrations in mobile soil moisture in silt loam subsoils. The centrifugal force, rather than centrifugation time, has a major effect on recovery. The maximum recovery for silt loams at field capacity is about 40%. Concentrations of most solutes are fairly constant with an increasing recovery, as most solutes, including nitrate, did not show a change in concentration with an increasing recovery.     

Seasonal analysis of the generation and composition of solid waste: potential use—a case study

Ensenada health officials lack pertinent information on the sustainable management of solid waste, as do health officials from other developing countries. The aims of this research are: (a) to quantify and analyze the household solid wastes generated in the city of Ensenada, Mexico, and (b) to project biogas production and estimate generation of electrical energy. The characterization study was conducted by socioeconomic stratification in two seasonal periods, and the biogas and electrical energy projections were performed using the version 2.0 Mexico Biogas Model. Per capita solid waste generation was 0.779?±?0.019 kg per person per day within a 98 % confidence interval. Waste composition is composed mainly of food scraps at 36.25 %, followed by paper and cardboard at 21.85 %, plastic at 12.30 %, disposable diapers at 6.26 %, and textiles at 6.28 %. The maximum capacity for power generation is projected to be 1.90 MW in 2019. Waste generated could be used as an intermediate in different processes such as recycling (41.04 %) and energy recovery (46.63 %). The electrical energy that could be obtained using the biogas generated at the Ensenada sanitary landfill would provide roughly 60 % of the energy needed for street lighting.     

Spatial�Ctemporal assessment and redesign of groundwater quality monitoring network: a case study

Assessment of groundwater quality monitoring networks requires methods to determine the potential efficiency and cost-effectiveness of the current monitoring programs. To this end, the concept of entropy has been considered as a promising method in previous studies since it quantitatively measures the information produced by a network. In this study, the measure of transinformation in the discrete entropy theory and the transinformation?Cdistance (T?CD) curves, which are used frequently by other researchers, are used to quantify the efficiency of a monitoring network. This paper introduces a new approach to decrease dispersion in results by performing cluster analysis that uses fuzzy equivalence relations. As a result, the sampling (temporal) frequency determination method also recommends the future sampling frequencies for each location based on certain criteria such as direction, magnitude, correlation with neighboring stations, and uncertainty of the concentration trend derived from representative historical concentration data. The proposed methodology is applied to groundwater resources in the Tehran?CKaradj aquifer, Tehran, Iran.     

Informing global environmental policy‐making: A plea for new methods of assessment and synthesis

Practice and research in assessment of global environmental change are dominated by two conventional assessment methods, formal models and expert panels. Models construct a representation of biophysical and socioeconomic components of a policy issue, to project future trends or consequences of interventions. Panels articulate consensus views of policyrelevant knowledge through deliberations among selected experts. These methods make valuable contributions, but are weak in addressing certain kinds of knowledge needs that are typical of globalchange issues. To address these needs, a set of novel assessment methods is proposed that combine elements of representation and deliberation. These methods, of which policy exercises, simulationgaming, and scenario exercises are examples, involve human participants in structured relevant decision and task settings. Relative to models and panels, these methods can more readily incorporate diverse perspectives, can integrate across broader collections of knowledge domains, and can both encourage creative insights and innovations, and provide tests of their relevance and practicality. Risks of bias, and of overconfident generalization from unique experiences, are effectively mitigated by critical debriefings, and appear no more severe than corresponding risks in conventional assessment methods, or in policymakers generalizations from historical experience. While serious development and implementation challenges remain, early experience suggests that these methods can offer useful ideas and insights for policymaking that are not available through other means.     

Effect of sampling method on contaminant measurement in pore-water and surface water at two uranium operations: can method affect conclusions?

This paper describes a comparison of two methods of sediment pore-water sampling and two methods of surface water sampling that were used in a broader investigation of cause(s) of adverse effects on benthic invertebrate communities at two Saskatchewan uranium operations (Key Lake and Rabbit Lake). Variables measured and compared included pH, ammonia, DOC, and trace metals. The two types of sediment pore-water samples that were compared are centrifuged and 0.45-microm filtered sediment core samples vs. 0.2-microm dialysis (peeper) samples. The two types of surface water samples that were compared are 53-microm filtered Van Dorn horizontal beta samples vs. 0.2-microm dialysis (peeper) samples. Results showed that 62% of the sediment core pore water values were higher than the corresponding peeper pore-water measurements, and that 63% of the Van Dorn surface water measurements were lower than corresponding peeper surface water measurements. Furthermore, only 24% and 14% of surface water and pore-water measurements, respectively, fell within +/-10% range of one another; 73% and 50%, respectively, fell within +/-50%. Although somewhat confounded by differences in filtering method, the observed differences are believed to primarily be related to small, vertical differences in the environment sampled. Despite observed differences in concentrations of toxicologically relevant variables generated by the different sampling methods, the weight of evidence (WOE) conclusions drawn from each set of exposure data on the possible cause(s) of in situ toxicity to Hyalella azteca from a related study were the same at each uranium operation. However, this concurrence was largely due to other dominant lines of evidence. The WOE conclusions at Key Lake were dominated by the toxicity response of H. azteca in relation to exposure chemistry, where as the WOE conclusions at Rabbit Lake were informed by exposure chemistry, the toxicological response of H. azteca, and whole-body contaminant concentrations in the test organisms. Had these multiple lines of evidence not been available, differences in exposure chemistry generated by the different sampling methods could have substantially influenced the identification of potential causes of in situ toxicity.     

The use of δ(15)N signatures of translocated macroalgae to map coastal nutrient plumes: improving species selection and spatial analysis of metropolitan datasets

The definition of the spatial footprint of land-derived nutrient plumes is a key element to the design of initiatives to combat eutrophication in urbanised coastal regions. These plumes, however, are difficult to monitor because of their inherent high-frequency temporal and spatial variability. Biomonitoring with macroalgae provides time-integration of bioavailable nitrogen inputs through the measurement of δ(15)N signatures in tissues, and adequate spatial coverage through translocation to desirable monitoring locations. In this study, we used laboratory incubations to compare three different species of macroalgae as bioindicators, and a field experiment to investigate the applicability of the technique for the large-scale mapping of nutrient plumes. Cladophora valonioides was selected for the field experiment as it showed rapid changes in δ(15)N values in the laboratory incubations, was abundant in shallow depths making collection cost-efficient, and had tough thalli capable of withstanding deployment in open water. Ecklonia radiata also performed well in the laboratory incubations, but field harvest from subtidal depths was comparatively more expensive. Ulva lactuca had fragile thalli, and large nitrogen reserves that acted to mask the isotopic signal of newly acquired nitrogen. Cladophora valonioides was translocated to 246 sites covering an area of ～445 km(2) along the highly urbanized temperate coast of Adelaide, South Australia. The resulting isotopic signatures of nitrogen in tissues were spatially interpolated to produce maps of land-derived nutrient plumes, to model probability and standard error in the predictive surface, and to optimize sampling design.     

Community air monitoring for pesticides—part 2: multiresidue determination of pesticides in air by gas chromatography,gas chromatography–mass spectrometry,and liquid chromatography–mass spectrometry

Two multiresidue methods were developed to determine pesticides in air collected in California. Pesticides were trapped using XAD-4 resin and extracted with ethyl acetate. Based on an analytical method from the University of California Davis Trace Analytical Laboratory, pesticides were detected by analyzing the extract by gas chromatography–mass spectrometry (GC-MS) to determine chlorothalonil, chlorthal-dimethyl, cycloate, dicloran, dicofol, EPTC, ethalfluralin, iprodione, mefenoxam, metolachlor, PCNB, permethrin, pronamide, simazine, trifluralin, and vinclozolin. A GC with a flame photometric detector was used to determine chlorpyrifos, chlorpyrifos oxon, diazinon, diazinon oxon, dimethoate, dimethoate oxon, fonophos, fonophos oxon, malathion, malathion oxon, naled, and oxydemeton. Trapping efficiencies ranged from 78 to 92 % for low level (0.5 μg) and 37–104 % for high level (50 and 100 μg) recoveries. Little to no degradation of compounds occurred over 31 days; recoveries ranged from 78 to 113 %. In the California Department of Food and Agriculture (CDFA) method, pesticides were detected by analyzing the extract by GC-MS to determine chlorothalonil, chlorpyrifos, cypermethrin, dichlorvos, dicofol, endosulfan 1, endosulfan sulfate, oxyfluorfen, permethrin, propargite, and trifluralin. A liquid chromatograph coupled to a MS was used to determine azinphos-methyl, chloropyrifos oxon, DEF, diazinon, diazinon oxon, dimethoate, dimethoate oxon, diuron, EPTC, malathion, malathion oxon, metolachlor, molinate, norflurazon, oryzalin, phosmet, propanil, simazine and thiobencarb. Trapping efficiencies for compounds determined by the CDFA method ranged from 10 to 113, 22 to 114, and 56 to 132 % for 10, 5, and 2 μg spikes, respectively. Storage tests yielded 70–170 % recovery for up to 28 days. These multiresidue methods represent flexible, sensitive, accurate, and cost-effective ways to determine residues of various pesticides in ambient air.     

Publicly available datasets on thallium (Tl) in the environment—a comment on <Emphasis Type="Italic">“Presence of thallium in the environment: sources of contaminations,distribution and monitoring methods”</Emphasis> by Bozena Karbowska,Environ Monit Assess (2016) 188:640 (DOI 10.1007/s10661-016-5647-y)

This comment highlights a whole series of datasets on thallium concentrations in the environment that were overlooked in the recent review by Karbowska, Environmental Monitoring and Assessment, 188, 640, 2016 in this journal. Geochemical surveys carried out over the last few decades all over the world at various scales and using different sampling media have reported the concentration of thallium (and dozens more elements) in tens of thousands of samples. These datasets provide a ‘real-world’ foundation upon which source apportionment investigations can be based, monitoring programs devised and modelling studies designed. Furthermore, this comment also draws attention to two global geochemical mapping initiatives that should be of interest to environmental scientists.