A model for the implementation of a two-shift municipal solid waste and recyclable material collection plan that offers greater convenience to residents

Separating recyclables from municipal solid waste (MSW) before collection reduces not only the quantity of MSW that needs to be treated but also the depletion of resources. However, the participation of residents is essential for a successful recycling program, and the level of participation usually depends on the degree of convenience associated with accessing recycling collection points. The residential accessing convenience (RAC) of a collection plan is determined by the proximity of its collection points to all residents and its temporal flexibility in response to resident requirements. The degree of proximity to all residents is determined by using a coverage radius that represents the maximum distance residents need to travel to access a recycling point. The temporal flexibility is assessed by the availability of proximal recycling points at times suitable to the lifestyles of all residents concerned. In Taiwan, the MSW collection is implemented at fixed locations and at fixed times. Residents must deposit their garbage directly into the collection vehicle. To facilitate the assignment of collection vehicles and to encourage residents to thoroughly separate their recyclables, in Taiwan MSW and recyclable materials are usually collected at the same time by different vehicles. A heuristic procedure including an integer programming (IP) model and ant colony optimization (ACO) is explored in this study to determine an efficient two-shift collection plan that takes into account RAC factors. The IP model has been developed to determine convenient collection points in each shift on the basis of proximity, and then the ACO algorithm is applied to determine the most effective routing plan of each shift. With the use of a case study involving a city in Taiwan, this study has demonstrated that collection plans generated using the above procedure are superior to current collection plans on the basis of proximity and total collection distance.     

城市固体废物优化管理模型及管理成本影响因素研究

采用不确定性多目标动态优化模型,以优化环境和经济为目标,对中国佛山市固体废物管理进行规划.结果表明,该模型能大幅度降低固体废物管理与处理成本,节省财政支出.研究得出影响固体废物总处理费用的3个重要影响因素为产生量、回收量、处理容量.针对以上3个因素深入分析比较,提出了广义和狭义的综合处理技术,这是经济、环保、可行的技术策略:首先,将广义综合处理应用到实际中,采用分类回收、压缩收集、优化模型对废物进行合理配置,尽量降低经济成本和环境影响;其次,从狭义角度出发,采用多种技术组合,达到处理率高、资源化程度高、环境影响小的目的.     

Factors influencing regional municipal solid waste management strategies

Although regionalization policies have been proven as good strategies for municipal solid waste (MSW) management in previous studies, the optimal allocation of the waste stream is significantly affected by several influential factors, thus further investigation of the impacts of these factors on regional MSW management strategies is necessary. This study demonstrated the impacts of waste-to-electricity transformation coefficient (WETC) of incinerators and the fluctuation of unit tipping fees on the regional MSW flow/allocation of the Taipei metropolitan area from practical and economic perspectives. Real-world data and linear programming were used to obtain the least-cost alternatives under different scenarios. Analytical results indicated some treatment facilities had geographic superiority and their priorities changed when actual WETCs of incinerators were considered. Treatment facilities located at weighted centers were identified. The allocation of MSW among incinerators and landfills is affected by fluctuation of unit tipping fees within a certain range. Treatment facilities sensitive to the changes in unit tipping fees were also identified. Regression equations were also established that can estimate the cost items of MSW management scenarios with different unit tipping fees. The results of this study are very useful for daily basis regulation of MSW administration.     

Shortest service location model for planning waste pickup locations

A municipal solid waste (MSW) and recycled material curbside pickup bus system was recently initiated in a Taiwan city to improve collection service. For such an MSW pickup system, selecting appropriate collection stops critically affects hauling costs and service efficiency. Conventionally, MSW collection points are heuristically and manually chosen, resulting in a hauling system that is not as effective as intended in terms of location suitability and the number of collection points. The Shortest Service Location (SSL) model, which minimizes the sum of service distances, was therefore proposed in this study. The SSL model was compared with two other models for a local MSW pickup system problem. Using georeferenced graphs generated by a geographical information system (GIS) and related programs, the performance of the three models was compared according to walking distance to a service stop, the coverage of a service stop, and the number of service stops. The results show that the SSL solution can shorten walking distances by approximately 10% and reduce the overlap of service areas covered.     

Batch test assessment of waste-to-energy combustion residues impacts on precipitate formation in landfill leachate collection systems

Disposal practices for bottom ash and fly ash from waste-to-energy (WTE) facilities include emplacement in ash monofills or co-disposal with municipal solid waste (MSW) and residues from water and wastewater treatment facilities. In some cases, WTE residues are used as daily cover in landfills that receive MSW. A recurring problem in many landfills is the development of calcium-based precipitates in leachate collection systems. Although MSW contains varying levels of calcium, WTE residues and treatment plant sludges have the potential to contribute concentrated sources of leachable minerals into landfill leachates. This study was conducted to evaluate the leachability of calcium and other minerals from residues generated by WTE combustion using residues obtained from three WTE facilities in Florida (two mass-burn and one refuse-derived fuel). Leaching potential was quantified as a function of contact time and liquid-to-solid ratios with batch tests and longer-term leaching tests using laboratory lysimeters to simulate an ash monofill containing fly ash and bottom ash. The leachate generated as a result of these tests had total dissolved solid (TDS) levels ranging from 5 to 320 mg TDS/g ash. Calcium was a major contributor to the TDS values, contributing from 20 to 105 g calcium/kg ash. Fly ash was a major contributor of leachable calcium. Precipitate formation in leachates from WTE combustion residues could be induced by adding mineral acids or through gas dissolution (carbon dioxide or air). Stabilization of residual calcium in fly ashes that are landfilled and/or the use of less leachable neutralization reagents during processing of acidic gases from WTE facilities could help to decrease the calcium levels in leachates and help to prevent precipitate formation in leachate collection systems.     

Factors Influencing Regional Municipal Solid Waste Management Strategies

Abstract

Although regionalization policies have been proven as good strategies for municipal solid waste (MSW) management in previous studies, the optimal allocation of the waste stream is significantly affected by several influential factors, thus further investigation of the impacts of these factors on regional MSW management strategies is necessary. This study demonstrated the impacts of waste-to-electricity transformation coefficient (WETC) of incinerators and the fluctuation of unit tipping fees on the regional MSW flow/allocation of the Taipei metropolitan area from practical and economic perspectives. Real-world data and linear programming were used to obtain the least-cost alternatives under different scenarios. Analytical results indicated some treatment facilities had geographic superiority and their priorities changed when actual WETCs of incinerators were considered. Treatment facilities located at weighted centers were identified. The allocation of MSW among incinerators and landfills is affected by fluctuation of unit tipping fees within a certain range. Treatment facilities sensitive to the changes in unit tipping fees were also identified. Regression equations were also established that can estimate the cost items of MSW management scenarios with different unit tipping fees. The results of this study are very useful for daily basis regulation of MSW administration.     

控制城市垃圾焚烧二噁（口英）产生与扩散方法

控制垃圾焚烧二产生与扩散分三部分首先,通过预处理除去原生垃圾中的聚氯乙烯塑料,从源头上控制垃圾焚烧二哄产生的物质基础;其次,垃圾焚烧炉采用组合式循环流化床锅炉,实行垃圾先低温热解气化,然后高温燃烧垃圾热解气体的方式,同时在炉内加入添加剂实现稳定燃烧和部分脱氯,以减少二哄在炉内生成和炉后形成量;最后,在烟气尾部采用吸附剂吸附二哄,并与布袋除尘器配套使用,控制二哄的尾部扩散.该工艺具有成本低、控污效率高等优点,特别适用于发展中国家的垃圾焚烧二哄控制.     

Fuel consumption, emissions estimation, and emissions cost estimates using global positioning data

The methodology laid out in this paper shows that typical operational data from vehicle fleets monitored by a global positioning system (GPS) can be used to estimate heavy-duty diesel vehicle (HDDV) emissions, thereby enabling waste managers and governing bodies to internalize the responsibility for socioenvironmental costs traditionally absorbed by external parties. Although municipal solid waste (MSW) collection vehicles are the subjects of this particular study, the methodology presented here can be applied to any fleet of vehicles monitored by GPS. This study indicates that MSW collection trucks may be considerably less fuel efficient in the field than published values for HDDV fuel efficiency suggest. The average fuel efficiency of one MSW collection truck was estimated as 0.90 +/- 0.44 km/L (2.12 +/- 1.03 mi/gal). This same truck would generate approximately 42 metric tons of CO2 equivalents/yr, which is comparable to the greenhouse gas emissions of a large sport utility vehicle driving six times the distance, in town, for a year. In terms of the impacts such emissions have, projections for the monetary cost of emissions are available but highly variable. They suggest that the external monetary costs of emissions range between 6 and 39% of the annual fuel costs for the studied MSW collection truck. The results of this study indicate a need for further research into valuation of the hidden, external costs of emissions, borne by local and global socioecological communities. The possible implications of this result include poorly advised fleet procurement decisions and underestimation of MSW collection fleet emissions.     

An optimal model and its application for the management of municipal solid waste from regional small cities in China

Based on the basic characteristics of municipal solid waste (MSW) from regional small cities in China, some optimal management principles have been put forward: regional optimization, long-term optimization, and integrated treatment/disposal optimization. According to these principles, an optimal MSW management model for regional small cities is developed and provides a useful method to manage MSW from regional small cities. A case study application of the optimal model is described and shows that the optimal management scenarios in the controlling region can be gained, adequately validating and accounting for the advantages of the optimal model.     

An Optimal Model and Its Application for the Management of Municipal Solid Waste from Regional Small Cities in China

Abstract

Based on the basic characteristics of municipal solid waste (MSW) from regional small cities in China, some optimal management principles have been put forward: regional optimization, long-term optimization, and integrated treatment/disposal optimization. According to these principles, an optimal MSW management model for regional small cities is developed and provides a useful method to manage MSW from regional small cities. A case study application of the optimal model is described and shows that the optimal management scenarios in the controlling region can be gained, adequately validating and accounting for the advantages of the optimal model.     

基于集装化外运与综合型处理的上海城市生活垃圾管理对策

分析了上海市区生活垃圾收运处理现状与问题,借鉴国外特大城市生活垃圾收运处理管理经验和教训,提出了将现有垃圾水运系统升级改造为集装化水陆联运系统、将现有老港废弃物处置场扩建为生活垃圾分类、生化处理、焚烧发电、填埋等多种技术有机组合的综合型处理基地的方案,为改善上海市生活垃圾收运与处理处置系统提出可行的对策建议.     

Influence of synoptic and mesoscale meteorology on ozone pollution potential for San Joaquin Valley of California

The distribution of historical ozone levels for a region is tabulated as a function of its prevailing synoptic and mesoscale influences. Meteorological patterns are determined sequentially from extended records of hourly surface wind measurements sampling relevant low-level flows. A visualization method is presented to readily indicate the likelihoods for exceedances to occur under a variety of meteorological conditions. The study domain is San Joaquin Valley (SJV) of California, which is divided into three subregions (North, Central, and South). Each day from May–October of 1996–2004 is labeled using synoptic (single-day) and mesoscale (intra-day) patterns. Emissions levels are assumed roughly constant for this period following the introduction of reformulated gasoline to California. Synoptic motions largely control the regional SJV ozone pollution potential; the same single-day patterns are identified for all three SJV subregions. Additionally, a unique mesoscale flow feature is identified in each subregion that strongly affects its ozone levels: flows through minor Coast Range gaps for N-SJV, the Fresno Eddy for C-SJV, and flows through Mojave Pass for S-SJV. The strength of each mesoscale feature is characterized using 1-h surface u or v wind components that explain local ozone pollution potentials.     

Life cycle and economic assessment of source-separated MSW collection with regard to greenhouse gas emissions: a case study in China

In China, the continuously increasing amount of municipal solid waste (MSW) has resulted in an urgent need for changing the current municipal solid waste management (MSWM) system based on mixed collection. A pilot program focusing on source-separated MSW collection was thus launched (2010) in Hangzhou, China, to lessen the related environmental loads. And greenhouse gas (GHG) emissions (Kyoto Protocol) are singled out in particular. This paper uses life cycle assessment modeling to evaluate the potential environmental improvement with regard to GHG emissions. The pre-existing MSWM system is assessed as baseline, while the source separation scenario is compared internally. Results show that 23 % GHG emissions can be decreased by source-separated collection compared with the base scenario. In addition, the use of composting and anaerobic digestion (AD) is suggested for further optimizing the management of food waste. 260.79, 82.21, and ?86.21 thousand tonnes of GHG emissions are emitted from food waste landfill, composting, and AD, respectively, proving the emission reduction potential brought by advanced food waste treatment technologies. Realizing the fact, a modified MSWM system is proposed by taking AD as food waste substitution option, with additional 44 % GHG emissions saved than current source separation scenario. Moreover, a preliminary economic assessment is implemented. It is demonstrated that both source separation scenarios have a good cost reduction potential than mixed collection, with the proposed new system the most cost-effective one.     

生活垃圾焚烧烟气排放中二噁英对人体健康的风险评价

随着垃圾焚烧的广泛应用,由此产生的二次污染问题也日益显现出来,特别是二嗯英污染已引起世界的关注。这也是垃圾焚烧设施在环评阶段遭到周围公众反对的原因之一。文中介绍了二嗯英的危害、垃圾焚烧烟气中的二嗯英来源以及二嗯英的相关标准。以某垃圾焚烧发电厂为例,对垃圾焚烧烟气中的二嗯英类物质对人体健康的风险进行了评价,并提出了如何最大限度地减少垃圾焚烧处理过程中的二唔英排放量。     

Prediction for energy content of Taiwan municipal solid waste using multilayer perceptron neural networks

In the past decade, the treatment amount of municipal solid waste (MSW) by incineration has increased significantly in Taiwan. By year 2008, approximately 70% of the total MSW generated will be incinerated. The energy content (usually expressed by lower heating value [LHV]) of MSW is an important parameter for the selection of incinerator capacity. In this work, wastes from 55 sampling sites, including villages, towns, cities, and remote islands in the Taiwan area, were sampled and analyzed once a season from April 2002 to March 2003 to determine the waste characteristics. The LHV of MSW in Taiwan was predicted by the multilayer perceptron (MLP) neural networks model using the input parameters of elemental analysis and dry- or wet-base physical compositions. Although all three of the models predicted LHV values rather accurately, the elemental analysis model provided the most accurate prediction of LHV values. Additionally, the wet-base physical composition model was the easiest and most economical. Therefore, the waste treatment operators can choose the more appropriate analysis method considering situations themselves, such as time, equipment, technology, and cost.     

Trends in snowpack chemistry and comparison to National Atmospheric Deposition Program results for the Rocky Mountains, US, 1993–2004

Seasonal snowpack chemistry data from the Rocky Mountain region of the US was examined to identify long-term trends in concentration and chemical deposition in snow and in snow-water equivalent. For the period 1993–2004, comparisons of trends were made between 54 Rocky Mountain Snowpack sites and 16 National Atmospheric Deposition Program wetfall sites located nearby in the region. The region was divided into three subregions: Northern, Central, and Southern. A non-parametric correlation method known as the Regional Kendall Test was used. This technique collectively computed the slope, direction, and probability of trend for several sites at once in each of the Northern, Central, and Southern Rockies subregions. Seasonal Kendall tests were used to evaluate trends at individual sites.Significant trends occurred during the period in wetfall and snowpack concentrations and deposition, and in precipitation. For the comparison, trends in concentrations of ammonium, nitrate, and sulfate for the two networks were in fair agreement. In several cases, increases in ammonium and nitrate concentrations, and decreases in sulfate concentrations for both wetfall and snowpack were consistent in the three subregions. However, deposition patterns between wetfall and snowpack more often were opposite, particularly for ammonium and nitrate. Decreases in ammonium and nitrate deposition in wetfall in the central and southern rockies subregions mostly were moderately significant (p<0.11) in constrast to highly significant increases in snowpack (p<0.02). These opposite trends likely are explained by different rates of declining precipitation during the recent drought (1999–2004) and increasing concentration. Furthermore, dry deposition was an important factor in total deposition of nitrogen in the region. Sulfate deposition decreased with moderate to high significance in all three subregions in both wetfall and snowpack. Precipitation trends consistently were downward and significant for wetfall, snowpack, and snow-telemetry data for the central and southern rockies subregions (p<0.03), while no trends were noted for the Northern Rockies subregion.     

Monitoring of ambient air PCDD/F levels in Portugal

As part of a monitoring program conducted by IDAD--Institute for Environment and Development and supported by regional municipal solid waste (MSW) management authorities, dioxin concentrations in ambient air were measured in three regions of Portugal: Porto, Lisbon and Madeira. These independent studies were performed with the intention of providing data as a basis for the evaluation of potential impacts of the operation of recently built MSW incinerators. Thus, 170 samples were collected in nine different sites from January 1999 till present. The measured levels revealed an extremely variable content of PCDDs/PCDFs depending both on the area and the season of the year. Samples taken in Porto and Lisbon reveal a similar homologue structure even if concentrations measured in the Porto region are significantly greater. Data from Madeira is characteristic of a remote site with some of the congeners concentrations below the detection limit.     

The role of mechanical and biological treatment in reducing methane emissions from landfill disposal of municipal solid waste in the United Kingdom

In Europe, the European Union Landfill Directive aims to reduce the negative environmental impacts of landfilling. This is mainly to be achieved by reducing the quantity of organic matter deposited, through measures such as the separate collection and recycling of the organic waste stream or pretreatment of residual wastes before landfilling. Other than incineration or other thermal processes, mechanical biological treatment is playing an increasingly important role. This study was conducted to seek the benefits of municipal solid waste (MSW) pretreatment, as well as the differences in methane production from the landfilling of untreated and mechanically/biologically treated (MBT) MSW using GasSim simulation. Results demonstrated that methane production rates vary significantly among waste fractions. Those that contribute most to methane generation (organic material and potentially reusable or recyclable material) could be targeted and treated before landfilling. The statistic relationship from the first phase of the study indicated that to match the increasingly stringent landfill waste organic content allowance, local councils should prioritize the reduction/sorting of certain targeted fractions, such as paper, card, green waste, and other putrescibles from MSW. Moreover, mechanical treatment alone produces organic-rich waste called mechanically sorted organic residues (MSORs), which can be viewed as an organic content concentration process. Mechanically and biologically pretreated waste, on the other hand, differs significantly from untreated MSW and MSORs. This work demonstrated that if efficient mechanical-biological treatment is used, considerable reductions in biological activity, landfill gas production, and energy content/total organic carbon could be achieved. Using GasSim, reductions in methane production of >74% have been simulated if a 90% organic content reduction can be achieved during biological treatment on MSORs. A 50-60% organic content reduction by following biological treatment can turn MSOR properties only into normal MSW equivalent though considerably less volume.     

模拟成藏地质填埋及诱导填埋有机质生气的理论初探

填埋处理和垃圾生物气的开发利用是实现城市生活垃圾资源化、无害化、减量化处理的有效途径,引入模拟生物气成藏和含气系统的思路,开展地质填埋与诱导填埋有机质生气研究是对能源地质学和填埋设计理念的新探索.通过对比研究地质填埋结构与地质学中生物气藏系统的异同点、生气机理和影响因素的共性与差异,初步论证了将模拟生物气藏理论引入地质填埋设计、优化地质填埋结构、提高填埋有机质生物气化效率和抽排利用效率的可行性;探讨了生物气藏理论在构建地质填埋结构中的可能应用和启示.研究表明:模拟生物气藏地质填埋设计和非常规生物气开发理念具有理论依据和现实基础;生物气藏生、储、盖要素和运、圈、保过程的模拟可应用于垃圾地质填埋场的构建,微生物地球化学理论有助于对诱导填埋有机质生气条件优化的认识.     

Delineation of air-quality basins utilizing multivariate statistical methods in Taiwan

This study analyzed time-series data of air pollutants, O₃ and PM₁₀, to determine the division of air-quality basins in Taiwan by employing multivariate statistical methods, Varimax rotational method and cluster analysis. The databases of air pollutants, daily maximum 1-h O₃ and daily mean PM₁₀ concentrations, were obtained from the ROC Environmental Protection Administration (ROC EPA) for the period from 1 July 1993 to 30 June 1998. The Varimax rotational method allowed us to delineate five homogenous PM₁₀ subregions that cumulatively accounted for 85.6% of the total variance. The time-series analysis of rotated component scores associated with the PM₁₀ subregions revealed that all divided subregions presented a strong seasonal cycle. Four of five subregions had higher component scores and PM₁₀ concentrations from November to January. One subregion experienced higher values from March to May. The use of Varimax approach and cluster analysis on the O₃ and PM₁₀ confirmed that O₃ was more demonstrative of the air-quality basins in Taiwan. Both the Varimax rotational method and the cluster analysis have specific advantages for the division of air-quality basins. This study also proposes a delineation of five air-quality basins having homogenous O₃ features as an alternative assignment of atmospheric carrying capacity control regions.