Impact of urbanization on the groundwater regime in a fast growing city in central India

This paper describes the impact of urbanization on the groundwater regime in a fast growing city, Solapur, in central India, giving special emphasis on the management of the present and ultimate demand of water in 2,020 AD. The objective is to apprise the city planners and administrators of the effects of urbanization on the groundwater regime in a fast growing medium-sized city in a developing country where the infrastructure developments are not in conformity with the rapid growth in population. Solapur city with an area of 178.57 km2 receives a recharge of about 24 million m3 of groundwater from various sources annually. Reduction in recharge, as conventionally assumed due to the impact of urbanization, could not, however, be well established. Instead, there was a rise in recharge as water use in the city grew from time to time and more and more water was supplied to satisfy the human needs. Compared to mid-1970s, groundwater levels have increased within the main city area due to increased recharge and decreased groundwater abstraction. However, outside the main city area, there is a general decline in groundwater levels due to increased groundwater utilization for irrigation purposes. Groundwater quality deterioration has been highly localized. Water quality has deteriorated during the last 10 years, especially in dugwells, mainly due to misuse and disuse of these structures and poor circulation of groundwater. However, in case of borewells, comparison of the present water quality with that in mid-1970s and early 1980s does not show any perceptible change. Deeper groundwater tapped by borewells can still be used for drinking purposes with caution.     

Major ion chemistry and hydrochemical studies of groundwater of Bangalore South Taluk, India

Groundwater is almost globally important for human consumption as well as for the support of habitat and for maintaining the quality of base flow to rivers, while its quality assessment is essential to ensure sustainable safe use of the resources for drinking, agricultural, and industrial purposes. In the current study, 28 groundwater samples were collected around Vrishabhavathi valley region of Bangalore South Taluk to assess water quality and investigate hydrochemical nature by analyzing the major cations (Ca^2?+?, Mg^2?+?, Na^?+?, K^?+?) and anions $(\text{HCO}_{3}^{-}$ , Cl^???, F^???, $\text{SO}_{4}^{2-}$ , $\text{NO}_{3}^{-}$ , $\text{PO}_{4}^{3-}$ , $\text{CO}_{3}^{2-})$ besides some physical and chemical parameters (pH, electrical conductivity, alkalinity, and total hardness). Also, geographic information system-based groundwater quality mapping in the form of visually communicating contour maps was developed to delineate spatial variation in physico-chemical characteristics of groundwater samples. Piper trilinear diagram was constructed to identify groundwater groups (hydrochemical facies) using major anionic and cationic concentration and it was found that majority of the samples belongs to $\text{Ca}^{2+}-\text{Mg}^{2+}-\text{Cl}^{-}-\text{SO}_{4}^{2-}$ and $\text{Ca}^{2+}-\text{Mg}^{2+}-\text{HCO}_{3}^{-}$ hydrochemical facies. Wilcox classification and US Salinity Laboratory hazard diagram suggests that 92.86% of the samples were falling under good to permissible category and C3–S1 groups, respectively, indicating high salinity/low sodium.     

Major ion chemistry and hydrochemical studies of groundwater of parts of Palar river basin, Tamil Nadu, India

Groundwater is almost globally important for human consumption as well as for the support of habitat and for maintaining the quality of base flow to rivers, while its quality assessment is essential to ensure sustainable safe use of the resources for drinking, agricultural, and industrial purposes. In the current study, 50 groundwater samples were collected from parts of Palar river basin to assess water quality and investigate hydrochemical nature by analyzing the major cations (Ca, Mg, Na, K) and anions (HCO(3), Cl, F,SO(4), NO(3), PO(4),CO(3), HCO(3), and F) besides some physical and chemical parameters (pH, electrical conductivity, alkalinity, and total hardness). Also, geographic information system-based groundwater quality mapping in the form of visually communicating contour maps was developed using ArcGIS-9.2 to delineate spatial variation in physicochemical characteristics of groundwater samples. Wilcox classification and US Salinity Laboratory hazard diagram suggests that 52% of the groundwater fall in the field of C2-S1, indicating water of medium salinity and low sodium, which can be used for irrigation in almost all types of soil with little danger of exchangeable sodium. Remaining 48% is falling under C1-SI, indicating water of low salinity and low sodium.     

Delineating shallow saline groundwater zones from Southern India using geophysical indicators

A geophysical survey was conducted over an industrial belt encompassing 80 functional leather factories in Southern India. These factories discharge untreated effluents which pollute shallow groundwater where electrical conductivity (EC) value had a wide range between 545 and 26,600 μS/cm (mean, 3, 901 μS/cm). The ranges of Na⁺ and Cl^? ions were from 46 to 4,850 mg/L (mean, 348 mg/L) and 25 to 10,390 mg/L (mean, 1,079 mg/L), respectively. Geoelectrical layer parameters of 37 vertical electrical soundings were analyzed to demarcate fresh and saline water zones. However, the analysis not did lead to a unique resolution of saline and fresh waters. It was difficult to assign a definitive value to the aquifer resistivity of any area. Thus, geophysical indicators, namely longitudinal unit conductance (S), transverse unit resistance (T), and average longitudinal resistivity (R _s), were calculated for identifying fresh and saline waters. Spatial distributions of S, T, and R _s reflected widely varying ranges for the saline and fresh water zones. Further, the empirical relation of formation factor (F) was established from pore-water resistivity and aquifer resistivity for fresh and saline aquifers, which may be used to estimate local EC values from the aquifer resistivity, where well water is not available.     

Rational pricing of groundwater with a growing population

When population is increasing, characterizing the optimal water consumption path is complicated by the fact that the underlying dynamics of the water stock is contingent on the level of the stock itself. We propose a method of constructing the optimal path in this case. Since population is increasing, the optimal consumption path may involve refraining at times from consuming the totality of the surface water flow in order to restock in groundwater for future consumption. The aquifer then serves as a means to achieve welfare increasing intertemporal transfers of surface water. Therefore the aquifer itself, as distinct from the stock of water it serves to store, may have value and the marginal valuation of water when groundwater stocks are being drawn upon should, for this reason, differ at times from the marginal valuation of water when it is drawn strictly from surface water.     

Modelling of lindane transport in groundwater of metropolitan city Vadodara,Gujarat, India

Migration pattern of organochloro pesticide lindane has been studied in groundwater of metropolitan city Vadodara. Groundwater flow was simulated using the groundwater flow model constructed up to a depth of 60 m considering a three-layer structure with grid size of 40?×?40?×?40 m³. The general groundwater flow direction is from northeast to south and southwest. The river Vishwamitri and river Jambua form natural hydrologic boundary. The constant head in the north and south end of the study area is taken as another boundary condition in the model. The hydraulic head distribution in the multilayer aquifer has been computed from the visual MODFLOW groundwater flow model. TDS has been computed though MT3D mass transport model starting with a background concentration of 500 mg/l and using a porosity value of 0.3. Simulated TDS values from the model matches well with the observed data. Model MT3D was run for lindane pesticide with a background concentration of 0.5?μg/l. The predictions of the mass transport model for next 50 years indicate that advancement of containment of plume size in the aquifer system both spatially and depth wise as a result of increasing level of pesticide in river Vishwamitri. The restoration of the aquifer system may take a very long time as seen from slow improvement in the groundwater quality from the predicted scenarios, thereby, indicating alarming situation of groundwater quality deterioration in different layers. It is recommended that all the industries operating in the region should install efficient effluent treatment plants to abate the pollution problem.     

Integrated hydrochemical and geophysical studies for assessment of groundwater pollution in basaltic settings in Central India

The Pithampur Industrial sectors I, II, and III, located approximately, 45 km from Indore in Central India have emerged as one of the largest industrial clusters in the region. Various types of industries ranging from automobiles to chemicals and pharmaceuticals have been set up in the region since 1990. Most of the industries have effluent treatment plants (ETP) for treating wastewater before its disposal on land and/or in water body. The present study is an attempt to assess the groundwater quality in the watersheds surrounding these industrial sectors to develop the baseline groundwater quality in order to enable the policy makers to facilitate decisions on the development of industries in this region. The industries are located in two sub-watersheds, namely, Gambhir river sub-watershed and Chambal river sub-watershed. Geologically, the study area is located in the Deccan traps of Cretaceous to Paleocene age. The different basaltic flow units underlie clayey soils varying in thickness from 2–3 m. The aquifer is mostly of unconfined nature. Samples have been collected from a network of observation wells set up in the watersheds. The water quality analysis of the groundwater samples has been carried out six times during three hydrological cycles of 2004, 2005, and 2006. The results indicate that a few observation wells in the vicinity of the industrial clusters have very high TDS concentration and exceed the Bureau of Indian Standards (BIS) guideline for TDS concentration. The contamination of groundwater has been more severe in the Gambhir watershed as compared to the Chambal watershed. The presence of the impermeable clay layers has resulted in a slow migration of contaminants from the sources. The findings reveal that there is no significant groundwater contamination in the Pithampur industrial sectors except in the vicinity of the industrial clusters, which indicates that there is good environmental space available for the expansion of industrial units in the Pithampur industrial hub.     

Major ion chemistry and weathering processes in the Midyan Basin, northwestern Saudi Arabia

Chemical characteristics of 72 groundwater samples collected from Midyan Basin have been studied to evaluate major ion chemistry together with the geochemical and weathering processes controlling the water composition. Water chemistry of the study area is mainly dominated by Na, Ca, SO₄, and Cl. The molar ratios of (Ca?+?Mg)/total cations, (Na?+?K)/total cations, (Ca?+?Mg)/(Na?+?K), (Ca?+?Mg)/(HCO₃?+?SO₄), (Ca?+?Mg)/HCO₃, and Na/Cl reveal that water chemistry of the Midyan Basin is controlled by evaporite dissolution (gypsum and/or anhydrite, and halite), silicate weathering, and minor contribution of carbonate weathering. The studied groundwater samples are largely undersaturated with respect to dolomite, gypsum, and anhydrite. These waters are capable of dissolving more of these minerals under suitable physicochemical conditions.     

Effects of a constructed wetland and pond system upon shallow groundwater quality

Constructed wetland (CW) and constructed pond (CP) are commonly utilized for removal of excess nutrients and certain pollutants from stormwater. This study characterized shallow groundwater quality for pre- and post-CW and CP system conditions using data from monitoring wells. Results showed that the average concentrations of groundwater phosphorus (P) decreased from pre-CW to post-CW but increased from pre-CP to post-CP. The average concentrations of groundwater total Kjeldahl nitrogen and ammonium ( $ {\mathrm{NH}}{_4^{ + }} $ ) increased from pre-CW (or CP) to post-CW (or CP), whereas the average concentrations of groundwater arsenic (As), chromium, nickel, and zinc (Zn) decreased from pre-CW to post-CW regardless of the well locations. Variations of groundwater cadmium, copper, and Zn concentrations were larger in pre-CP than in post-CP and had a tendency to decrease from pre-CP to post-CP. In general, the average concentrations of groundwater aluminum and manganese decreased and of groundwater calcium, iron, magnesium, and sodium increased from pre-CP to post-CP. The average values of water levels (depth from the ground surface), redox potential, and conductance decreased and of chloride and sulfate ( $ {\mathrm{SO}}{_4^{{ - 2}}} $ ) increased after the wetland and pond were constructed regardless of the well locations. Results further revealed that there were significant differences (α?=?0.05) between the pre- and post-CW (or CP) for redox potential, water level, and As. This study suggests that the CW–CP system had discernible effects on some of the shallow groundwater quality constituents. This information is very useful for fully estimating overall performance of stormwater treatment with the CW–CP system.     

Chloride migration in groundwater for a tannery belt in Southern India

Groundwater in a tannery belt in Southern India is being polluted by the discharge of untreated effluents from 80 operating tanneries. Total dissolved solids and chloride (Cl⁻) measurements in open wells in the tannery cluster vary from 27,686 to 39,100 and 12,000 to 13,652 mg/l, respectively. A mass transport model was constructed using Visual MODFLOW Premium 4.4 software to investigate the chloride migration in an area of 75.56 km². Input to the chloride migration model was a groundwater flow model that considered steady and transient conditions. This model was calibrated with field observations; and sensitivity analysis was carried out whereby model parameters, viz., conductivity, dispersivity, and source concentration were altered slightly, and the effect on calibration statistics was evaluated. Results indicated that hydraulic conductivity played a more sensitive role than did dispersivity. The Cl⁻ migration was mainly through advection rather than dispersion. It was found that even if the pollutant load reduced to 50% of the present level, the Cl⁻ concentration in groundwater, even after 6 years, would not be reduced to the permissible limit of drinking water in the tannery belt.     

Spatial variability of the shallow groundwater level and its chemistry characteristics in the low plain around the Bohai Sea,North China

To characterize the spatial distribution of groundwater level (GWL) and its chemistry characteristics in the low plain around the Bohai Sea, shallow groundwater depth of 130 wells were determined. Water soluble ions composition, total dissolved solid (TDS), electric conductivity (EC), total hardness (TH), total alkalinity (TA), and total salt content (TS) of 128 representative groundwater samples were also measured. Classical statistics, geostatistical method combined with GIS technique were then used to analyze the spatial variability and distribution of GWL and groundwater chemical properties. Results show that GWL, TDS, EC, TH, TA, and TS all presented a lognormal distribution and could be fitted by different semivariogram models (spherical, exponential, and Gaussian). Spatial structure of GWL, TDS, EC, TH, TA, and TS changed obviously. GWL decreased from west inland plain to the east coastal plain, however, TDS, EC, and TS increased from west to east, TH and TA were higher in the middle and coastal plain area. Groundwater chemical type in the coastal plain was SO₄²⁻·Cl⁻—Na⁺ while chemical types in the inland plain were SO₄²⁻·Cl⁻—Ca²⁺·Mg²⁺ and HCO₃⁻—Ca²⁺·Mg²⁺.     

Evaluation of groundwater quality and its suitability for drinking and agricultural use in Thanjavur city, Tamil Nadu, India

As groundwater is a vital source of water for domestic and agricultural activities in Thanjavur city due to lack of surface water resources, groundwater quality and its suitability for drinking and agricultural usage were evaluated. In this study, 102 groundwater samples were collected from dug wells and bore wells during March 2008 and analyzed for pH, electrical conductivity, temperature, major ions, and nitrate. Results suggest that, in 90% of groundwater samples, sodium and chloride are predominant cation and anion, respectively, and NaCl and CaMgCl are major water types in the study area. The groundwater quality in the study site is impaired by surface contamination sources, mineral dissolution, ion exchange, and evaporation. Nitrate, chloride, and sulfate concentrations strongly express the impact of surface contamination sources such as agricultural and domestic activities, on groundwater quality, and 13% of samples have elevated nitrate content (>45 mg/l as NO₃). PHREEQC code and Gibbs plots were employed to evaluate the contribution of mineral dissolution and suggest that mineral dissolution, especially carbonate minerals, regulates water chemistry. Groundwater suitability for drinking usage was evaluated by the World Health Organization and Indian standards and suggests that 34% of samples are not suitable for drinking. Integrated groundwater suitability map for drinking purposes was created using drinking water standards based on a concept that if the groundwater sample exceeds any one of the standards, it is not suitable for drinking. This map illustrates that wells in zones 1, 2, 3, and 4 are not fit for drinking purpose. Likewise, irrigational suitability of groundwater in the study region was evaluated, and results suggest that 20% samples are not fit for irrigation. Groundwater suitability map for irrigation was also produced based on salinity and sodium hazards and denotes that wells mostly situated in zones 2 and 3 are not suitable for irrigation. Both integrated suitability maps for drinking and irrigation usage provide overall scenario about the groundwater quality in the study area. Finally, the study concluded that groundwater quality is impaired by man-made activities, and proper management plan is necessary to protect valuable groundwater resources in Thanjavur city.     

Chromium speciation in groundwater of a tannery polluted area of Chennai City, India

Chromium speciation in groundwater of a tannery polluted area was investigated for the distribution of chromium species and the influence of redox couples such as Fe(III)/Fe(II) and Mn(IV)/Mn(II). Speciation analysis was carried out by ammonium pyrolidinedithiocarbamate (APDC)–methylisobutylketone (MIBK) procedure. The groundwater samples were analyzed for Cr(III), Cr(VI), and Cr(III)-organic complexes. The APDC could not extract the Cr(III)-organic complexes, but HNO₃ digestion of the groundwater samples released the Cr(III)-organic complexes. The groundwater of the area is relatively oxidizing with redox potential (E _h) and dissolved oxygen (DO) ranged between 65 and 299 mV and 0.25 and 4.65 mg L^???1, respectively. The Fe(II) reduction of Cr(VI) was observed in some wells, but several wells that had Fe(II)/Cr(VI) concentrations more than the stoichiometric ratio (3:1) of the reduction reaction also had appreciable concentration of Cr(VI). This could partly be due to the oxidation of Fe(II) to Fe(III) by DO. It appears that the occurrence of Mn more than the Fe(II) concentration was also responsible for the presence of Cr(VI). Other reasons could be the Fe(II) complexation by organic ligands and the loss of reducing capacity of Fe(II) due to aquifer materials, but could not be established in this study.     

Chemistry of groundwater in Gulbarga district, Karnataka, India

Groundwater quality of Gulbarga District is extensively monitored for two years of study period from October 1999 to September 2001. Twenty-five different sampling stations were selected for the study purpose in the city and five selected villages in the district. Gulbarga districts lies in the northern plains of Karnataka State, covers an area of 16,244 km² and lies between 16°-11′ and 17°-19′N latitude and 76°-54′E longitude The study revealed that the water sources in the area are heavily polluted. The major water quality parameters exceeding the permissible limits during all the seasons are total hardness, calcium hardness, magnesium hardness, alkalinity and MPN (Bacterial count) and other parameters have shown distinctive variation in different stations and season. Most of these parameters are correlated with one another. Statistical analysis of the data is presented.     

GIS-based assessment and characterization of groundwater quality in a hard-rock hilly terrain of Western India

The growing population, pollution, and misuse of freshwater worldwide necessitate developing innovative methods and efficient strategies to protect vital groundwater resources. This need becomes more critical for arid/semi-arid regions of the world. The present study focuses on a GIS-based assessment and characterization of groundwater quality in a semi-arid hard-rock terrain of Rajasthan, western India using long-term and multi-site post-monsoon groundwater quality data. Spatio-temporal variations of water quality parameters in the study area were analyzed by GIS techniques. Groundwater quality was evaluated based on a GIS-based Groundwater Quality Index (GWQI). A Potential GWQI map was also generated for the study area following the Optimum Index Factor concept. The most-influential water quality parameters were identified by performing a map removal sensitivity analysis among the groundwater quality parameters. Mean annual concentration maps revealed that hardness is the only parameter that exceeds its maximum permissible limit for drinking water. GIS analysis revealed that sulfate and nitrate ions exhibit the highest (CV?>?30%) temporal variation, but groundwater pH is stable. Hardness, EC, TDS, and magnesium govern the spatial pattern of the GWQI map. The groundwater quality of the study area is generally suitable for drinking and irrigation (median GWQI?>?74). The GWQI map indicated that relatively high-quality groundwater exists in northwest and southeast portions of the study area. The groundwater quality parameter group of Ca, Cl, and pH were found to have the maximum value (6.44) of Optimum Index factor. It is concluded that Ca, Cl, and pH are three prominent parameters for cost-effective and long-term water quality monitoring in the study area. Hardness, Na, and SO₄, being the most-sensitive water quality parameters, need to be monitored regularly and more precisely.     

Hydrogeochemical study of shallow carbonate aquifers, Rameswaram Island, India

Groundwater quality assessment has been carried out based on physicochemical parameters (pH, EC, TDS, CO(3), HCO(3), Cl, SO(4), PO(4), NO(2), Ca(+2), Mg(+2), Na(+) and K(+)) and metal concentration in the Rameswaram Island from 25 bore wells. The Langelier Saturation Index of the groundwater shows positive values (63% samples) with a tendency to deposit the CaCO(3) in the majority of water samples. Scatter plot (Ca + Mg/HCO(3)) suggests carbonate weathering process, which is the main contributor of Ca(2+), Mg(2+) and HCO(3) ions to the water. Gibbs diagram suggests rock-water interaction dominance and evaporation dominance which are responsible for the change in the quality of water in the study area. NaCl and mixed CaNaHCO(3) facies are two main hydrogeochemical facies of groundwater. Mathematical calculations and graphical plots of geochemical data reveal that the groundwater of Rameswaram Island is influenced by natural weathering of rocks, anthropogenic activities and seawater intrusion due to over exploitation. Weathering and dissolution of carbonate and gypsum minerals also control the concentration of major ions (Ca(+2), Mg(+2), Na(+) and K(+)) in the groundwater. The nutrient concentration of groundwater is controlled to a large extent by the fertilizers used in agricultural lands and aquaforms. Comparison of geochemical data shows that majority of the groundwater samples are suitable for drinking water and irrigation purposes.     

Monitoring and assessment of groundwater quality in a khondalitic terrain,Andhra Pradesh,India

The groundwater quality assessment for the drinking and irrigation purpose is carried out in the Kandivalasa River Sub Basin covered with khondalitic suite (Garneti ferrous, Sillimanite, Gneiss) of rocks, near Cheepurupalli town of Vizianagaram district, Andhra Pradesh, India. The analysis for the groundwater quality for drinking has shown the slightly alkaline nature and high values of alkalinity in the study area. A very high concentration of total dissolved solids value is observed at one pocket where there has been contamination by many fertilizer industries located nearby the study area. The groundwater is highly affected by the nitrate. Higher fluoride values are obtained at few pockets. Most of the samples in the study area are categorized as very hard category. According to the Piper trilinear diagram, it can be observed that the carbonate hardness and secondary salinity have occupied at major part of study area. From the analysis of sodium adsorption ratio, salinity hazard, sodium percentage, residual sodium carbonate, and Kelly’s ratio, all the groundwater samples except at few locations fell under the category of good to excellent for irrigation. The prepared integrated groundwater quality maps for the drinking purpose and agricultural purposes are indicating that, by and large, the low-lying areas are having poor groundwater quality than the uplands for drinking as well as agricultural needs which means that the groundwater quality of the basin is following the topography.     

Evaluation of groundwater resources in a tiny Andrott Island, Union Territory of Lakshadweep, India

Lakshadweep is a group of 36 coral islands scattered in the Arabian Sea off the western coast of India. On such small tiny islands, groundwater is the only source of fresh water for the islanders. Due to the growing population on these islands, demand for fresh water is also increasing and on the other side the peculiar hydrologic, geologic and geomorphic features restrict the availability of groundwater. Therefore, a proper understanding of the groundwater condition is important in order to meet this increasing demand and also to formulate future development and management strategies. Detailed hydrogeological, geophysical and hydrochemical studies have been carried out to identify potential fresh groundwater resources and quantify vulnerable parts of Andrott Island, Union Territory of Lakshadweep. Systematic collection and analysis of hydrological, geophysical and hydrochemical data reveal that fresh groundwater is only available between 2.5 to 5.0 m depths and provide an early sign of deterioration in groundwater quality in the peripheral parts of eastern and western coasts of this island. It suggests immediate measures for arresting the deterioration in groundwater quality as well as augmentation for restoration of aquifer in some parts of the island.