废旧电脑污染问题及其管理对策

主要论述了国内外废旧电脑污染及处置现状、废旧电脑对环境的危害、废旧电脑回收与利用的应用前景,结合我国的实际,提出了对废旧电脑回收利用的管理对策及建议.     

废旧电脑的处理与资源化

分析了废旧电脑产生污染的原因及造成的危害,如何处理这些高速产生的电子废弃物,并将其有效地资源化已成为困扰环境保护的难题.结合国内外当前对废旧电脑的处理方法,提出了预防和控制的具体方法.     

废旧锂离子电池资源化技术研究

通过介绍废旧锂离子电池的组成成分及近年来废旧锂离子电池资源化处理技术的研究进展,提出目前主要回收方法有溶解分离法和直接回收正极材料的新型方法等,并对现有研究中存在的二次污染、安全性问题进行了初步探讨。     

废旧晶体硅光伏组件资源化回收研究进展

在传统能源逐步枯竭及碳达峰碳中和概念兴起的背景下,光伏产业得到迅猛发展,其后被忽视的组件报废问题、资源化回收问题需提上日程。本文对目前光伏产业中占主导地位的晶体硅光伏组件进行了介绍,并综合国内外相关文献,对目前废旧光伏组件资源化过程中较为成熟的物理法(包括机械拆解法和热处理法)和化学法(包括有机溶剂法和酸碱法)进行了概述,总结了目前不同技术的特点,以期为寻找经济、高效、清洁的废旧光伏组件回收方法提供思路。     

再谈废催化剂中金属的回收

介绍了含钯,钴,钼,钨的废催化剂的来源及从废催化剂中回收上述金属的工艺。     

苏州高新区电子废物回收获国家环保科学技术奖

近日,由苏州高新区承担实施的“电子废物回收处理管理政策与关键技术研究”项目荣获国家2011年度环境保护科学技术奖二等奖。2009年,高新区就“电子废物回收利用”课题进行研究,经过两年多的实践和推广,区内电子废物回收处理取得了阶段性成果。     

吐氏酸废液资源化技术的研究

研究了用化学萃取法回收吐氏酸废母液中染料中间体的多种影响因素,静态试验表明：通过萃取工艺,吐氏酸废母液中的染料中间体回收率可达９０％以上,萃余液中ＣＯＤｃｒ在５００～３０００ｍｇ／Ｌ之间;该工艺可使废母液中的回收物浓缩５～１０倍,根据静态试验得出的工艺参数,进行了动态模拟试验,取得了与静态试验非常接近的结果,为以后的示范工程提供了可靠的设计依据。     

废旧电脑的综合处理与处置

随着社会文明的高速发展,越来越多的高科技新兴产品进入人们的生活,带给人们更多的方便和享受的同时,也使城市生活垃圾结构发生了很大的改变,废电池、废电冰箱、废电脑等家用电器及其废物的另类生活垃圾成为今天新的环境问题.从环境管理和绿色处理的角度,综合概述了国内外废旧电脑处理的现状,结合国外的发展经验从绿色处理的角度对废旧电脑的处理与处置方法提出了一些建议.     

国外电子废弃物资源化概述

随着信息工业的飞速发展,以及人们对电子废弃物认识的深入和环保意识的加强,电子废弃物的回收利用已逐渐成为一项新兴产业。通过分析国外发达国家对电子废弃物的环境管理、工艺技术以及回收体系状况,总结了发达国家的成功经验,对我国建立和完善电子废弃物管理体系,发展研究电子废弃物资源化技术提出对策和建议。     

废电线缆再生铜资源化处理技术评述

我国再生铜产业已经成为中国有色金属工业的重要组成部分,极大地缓解了我国原生铜矿产资源不足的矛盾。我国废杂铜主要来源于国内回收和国外进口。进口含铜废料中,以回收铜为主的废电线电缆,约占进口总量的2/3。随着电子信息等科技产业的迅猛发展,废电线电缆再生铜资源化技术受到越来越多的关注。目前资源化综合利用废电线电缆的主要技术有机械处理技术、热回收处理技术、化学处理技术、低温冷冻处理技术、超声波分离回收技术和高压水射流回收技术。综述了各种方法和工艺的特点以及技术研究现状。     

脱硫废水生化处理初探

火电厂烟气脱硫过程产生的废水中污染物主要包括悬浮物、过饱和的亚硫酸盐、硫酸盐以及重金属等,燃煤电厂烟气系统增设脱硝装置后,进入脱硫废水的氨氮、总氮含量急剧增加。通过对国内外多个电厂的脱硫废水处理系统运行情况的调研及分析,采用厌氧氨氧化工艺作为废水脱氮方式是可行的。     

Preliminary study for the management of construction and demolition waste

This paper refers to the management of the construction and demolition (C&D) waste since, according to the EU Waste Strategy, C&D waste is considered to be one of the priority waste streams and appropriate actions need to be taken with respect to its effective management. Initially, the paper presents the state-of-the-art of the problem of C&D waste, including the amount and composition of C&D waste in EU countries, differences in the characteristics of this waste stream depending on its origin, as well as collection and management practices that are applied. A methodology is described for the estimation of the quantities of the waste stream under examination, since in most cases quantitative primary data is not available. Next, the fundamentals for the development of an integrated scheme for the management of C&D waste are presented and discussed, such as appropriate demolition procedures and location of waste management (off-site waste management, on-site waste management, direct on-site recovery, centralized on-site recovery). Finally, taking into consideration all relevant parameters, alternative systems that could be applied for the management of the C&D waste are suggested.     

Assessment of toxic metals in waste personal computers

Considering the enormous production of waste personal computers nowadays, it is obvious that the study of their composition is necessary in order to regulate their management and prevent any environmental contamination caused by their inappropriate disposal. This study aimed at determining the toxic metals content of motherboards (printed circuit boards), monitor glass and monitor plastic housing of two Cathode Ray Tube (CRT) monitors, three Liquid Crystal Display (LCD) monitors, one LCD touch screen monitor and six motherboards, all of which were discarded. In addition, concentrations of chromium (Cr), cadmium (Cd), lead (Pb) and mercury (Hg) were compared with the respective limits set by the RoHS 2002/95/EC Directive, that was recently renewed by the 2012/19/EU recast, in order to verify manufacturers’ compliance with the regulation. The research included disassembly, pulverization, digestion and chemical analyses of all the aforementioned devices. The toxic metals content of all samples was determined using Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). The results demonstrated that concentrations of Pb in motherboards and funnel glass of devices with release dates before 2006, that is when the RoHS Directive came into force, exceeded the permissible limit. In general, except from Pb, higher metal concentrations were detected in motherboards in comparison with plastic housing and glass samples. Finally, the results of this work were encouraging, since concentrations of metals referred in the RoHS Directive were found in lower levels than the legislative limits.     

核电厂温排水余热综合利用方案设计的初步研究

核电厂温排水（循环冷却水）余热的充分利用,可以使原本要排放到大气或水域中的热量大大减少,甚至能实现电厂余热的＂零排放＂,在节约能源、产生巨大经济效益的同时,也达到了保护电厂温排水受纳水体免遭热污染的目的。在国内外温排水余热利用途径调研的基础上,运用生态工程理论和生态设计的理念,进行温排水余热综合利用方案设计的初步研究。     

Life cycle assessment of the waste hierarchy--a Danish case study on waste paper

The waste hierarchy is being widely discussed these days, not only by cost-benefit analysts, but a growing number of life cycle assessments (LCA) have also begun to question it. In this article, we investigate the handling of waste paper in Denmark and compare the present situation with scenarios of more waste being recycled, incinerated or consigned to landfill. The investigations are made in accordance with ISO 14040-43 and based on the newly launched methodology of consequential LCA and following the recent guidelines of the European Centre on Waste and Material Flows. The LCA concerns the Danish consumption of paper in 1999, totalling 1.2 million tons. The results of the investigation indicate that the waste hierarchy is reliable; from an environmental point of view recycling of paper is better than incineration and landfilling. For incineration, the reason for the advantage of landfilling mainly comes from the substitution of fossil fuels, when incinerators provide heat and electricity. For recycling, the advantage is related to the saved wood resources, which can be used for generating energy from wood, i.e., from renewable fuel which does not contribute to global warming.     

Techniques to separate metal from waste printed circuit boards from discarded personal computers

Waste printed circuit boards contain valuable metals such as Au, Pd, Ag, and Cu that can be reutilized and harmful elements such as Pb, Br, and Cr that must be removed from the viewpoint of environmental conservation. In this research, we examined a method that separates the materials from printed circuit boards contained in discarded personal computers. After cutting the printed circuit boards to a size of 20 × 20 mm, they were heated at 873 K under an Ar atmosphere to remove organic resins containing elements such as C, H, and N. After heat treatment, the printed circuit boards were crushed using a planetary ball mill and the pulverized powders were filtered. The fraction with a granularity of greater than 250 μm was separated into magnetic and nonmagnetic materials by a magnetic field. Because the fraction with a granularity of less than 250 μm contained 39 mass% of C, it was heated at 1273 K in an atmosphere of 95% Ar and 5% O₂ to allow carbon combustion to take place, followed by metal reduction processing at the same temperature in an atmosphere of 97% Ar and 3% H₂. The basicity of the resulting powder was adjusted and the powder was heated at 1773 K under an Ar atmosphere. The proposed method separated the slag and metal, and 80% of the valuable metals contained in printed circuit boards could be collected.     

飞机拆解与再利用研究进展

随着报废飞机数量的日益增多,废旧飞机处理的环境问题显得尤为迫切.简要评述了空中客车公司飞机使用寿命终结高级管理流程（PAMELA）项目的情况,以及废旧飞机报废过程中的管理体系的建立,并对我国报废飞机拆解与再利用研究进展进行了阐述,以期为废旧飞机的处理找到新的途径.