Toxicity of herbal pharmaceutical wastewater on fish--Lebistes reticulatus (Peter)

Toxic effects of herbal pharmaceutical wastewater on common fish (Lebistes reticulatus) under laboratory conditions were studied. LC50 values for raw, neutralized, and physico-chemically treated effluent for 24, 48, 72, and 96 h ranged between 3.0-9.5%, 5.0-10.5%, and 35-41%, respectively. It was evident from the studies that physico-chemical treatment reduces the toxicity by more than 30%. This article discusses in detail the bioassay evaluation of raw, neutralized, and primary treated effluent. Physico-chemically treated effluent was further subjected to biological treatment by activated sludge system. Effluent from biological treatment revealed no toxic effect even after one month of exposure.     

Toxicity to Microtox, micro-algae and duckweed of effluents from the Bai Bang paper company (BAPACO), a Vietnamese bleached kraft pulp and paper mill

Toxicity of the combined effluent as well as effluents from different production units of BAPACO, a Vietnamese bleached kraft integrated pulp and paper mill, was studied using three ecotoxicological tests: Microtox, the micro-alga, Selenastrum capricornutum, and the duckweed, Lemna aequinoctialis. Physico-chemical characteristics of the effluents were also analyzed. Due to unstable operating conditions of the mill, a number of samples taken at different monitoring periods from each effluent were tested, in order to get statistically reliable ranges and averages of toxicity characteristics. For the mill combined effluent, it was found that the micro-algae were the most sensitive followed by Microtox bacteria, while duckweed was not sensitive. Microtox tests showed that the bleaching filtrate from the chlorination stage (C-stage) was the most toxic among all effluents in the mill. The combined effluent from the bleaching plant contributed the largest TEF (Toxicity Emission Factor) to the toxicity balance of the whole BAPACO combined effluent. A less-than-additive mode of toxicity was obtained. In spite of high pollution loads, e.g. BOD, COD, SS, to the Red River, the toxicity of the effluent was considered to be low. However, during periods of low river water sublethal toxic effects on the biota may be expected.     

Toxicity characterisation of sediment porewaters collected from UK estuaries using a Tisbe battagliai bioassay

The lethal toxicity of sediment porewater isolated from samples collected from six United Kingdom estuaries was tested using a Tisbe battagliai bioassay. A selection of Phase 1 toxicity identification evaluation (TIE) procedures was then used to characterise the substances responsible for the measured toxicity. In samples collected in 2000, cationic metals, ammonia, organic compounds were identified as the cause of toxicity in the most toxic sample collected. Some of the toxicity remained uncharacterised. It was shown that the toxicity in samples collected from the same locations in 2001 was due to ammonia. The successful application of the T. battagliai bioassay demonstrates that it is a suitable assay for marine sediment porewater TIE and that combined with simple characterisation procedures allow an initial assessment to be made on the type of substances responsible for the measured toxicity.     

An ecologically relevant exposure assessment for a polluted river using an integrated multivariate PLS approach

A case study is presented where an integrated, ecologically relevant exposure assessment is presented for a polluted lowland river. Using partial least squares regression of latent structures (PLS), an analysis of the impact of two effluents on physico-chemical water quality measures, macroinvertebrate and diatom communities, and in situ bioassay responses with four different test species are combined into an integrative exposure assessment. Bioassays focussed on growth and condition related endpoints, because they are key functional processes of organisms and populations. Integrating these multiple lines of evidence, we were able to discriminate among the impact of both effluents, link changes in physico-chemical water quality with bioassay endpoints and ecological quality of the ecosystem, and address the importance of integrating all information into one exposure assessment framework. The bioassays under field conditions indicated that most endpoints measured are a reflection of ecological effects rather than pollution related effects, or at least a combination of both ecological and toxicological effects. Factors such as food availability clearly influenced the outcome of in situ bioassays and ecological information was essential to explain observed discrepancies when trying to extrapolate bioassay results from the laboratory to the field.     

Optimisation of a microbial bioassay for contaminated soil monitoring: bacterial inoculum standardisation and comparison with Microtox assay

This work represents the first step to set up a toxicity testing procedure and to evaluate the sensitivity of the test microorganism to several classes of environmental pollutants. First, three different techniques were employed to standardise the microbial inoculum, then two different toxicity assessment protocols have been compared: Microtox and a dehydrogenase (DHase) activity inhibition test. The main goal was the optimisation of a microbial bioassay based on the dehydrogenase activity (DHase) inhibition in Pseudomonas fluorescens bacterial strain ATCC 13525. Triphenyl tetrazolium chloride (TTC) was used as electron acceptor and its reduction produces Triphenyl formazane (TPF). The P. fluorescens DHase inhibition bioassay was investigated for being a reliable and rapid method for assessing toxicity. The optimisation of the operating conditions resulted in a repeatable bioassay. Then, P. fluorescens and Vibrio fischeri sensitivity were firstly compared by testing Zn++, one of the reference compounds for Microtox test. In addition, other compounds (Ni++, Cd++, Cu++, phenol) were also tested with both bioassays. A high statistical significance of data was obtained with the logistic curve. The present work has demonstrated that P. fluorescens is as sensitive as Microtox culture (V. fischeri), for some of the metal ions. With reference to organic compounds, the lower sensitivity of P. fluorescens to phenol makes its use difficult in organic polluted samples.     

Assessing the biological status of fish in a river receiving pulp and paper mill effluents

This study compared the use of sentinel species- and community-based field approaches for assessing the biological status of fish living in a river receiving pulp and paper mill effluents. Three approaches were compared. Two approaches used sentinel species. One of these involved an internal/external examination of the fish that leads to the calculation of a fish health assessment index (HAI) and the other involved biochemical measurements of hepatic mixed function oxidase (MFO) activity and plasma steroid levels. The third approach characterized the fish community structure according to an index of biotic integrity (IBI). The comparison focused on how the methods respond to the hypothesis that recent process modifications/effluent treatment changes, resulting in demonstrable improvements in effluent quality, have beneficial effects on fish. Neither of the approaches using sentinel fish indicated clear mill-related influences either before or after the process modifications/effluent treatment changes. There was no evidence of depressed plasma steroids and increased MFO activity in fish frequently associated with mill effluent exposure in previous studies. While the HAI was higher at stations downstream from two mills, this could not be linked to effluent exposure alone. In contrast, the study of community structure showed a substantial improvement in fish assemblages at all the mill sites.     

大型蚤标志酶用于城市二级出水毒性的评价

大型蚤是一种国际公认的标准实验生物,广泛应用于污水、地表水等水质毒性检测。毒性水平较低的城市二级出水,对大型蚤往往无急性毒性效应,而具有慢性毒性效应,但慢性毒性检测周期过长,因此探索一种更灵敏的指标,实现快速检测,对于控制二级出水的水质风险具有重要意义。本研究考察了大型蚤在短期暴露于城市二级出水条件下,其体内乙酰胆碱酯酶、超氧化物歧化酶、过氧化氢酶、ATP酶、羧酸酯酶和碱性磷酸酯酶的酶活变化特征,从中筛选出对二级出水毒性响应灵敏的标志酶指标。实验结果表明,碱性磷酸酯酶、过氧化氢酶对二级出水毒性响应相对较灵敏,具有成为标志酶的潜力,研究结果为城市二级出水生物毒性评价方法优化提供新的思路。     

Heavy metal binding capacity (HMBC) of municipal solid waste landfill leachates

This research describes the use of a toxicity assay for the identification of metal toxicity, bioavailability and heavy metal binding capacity (HMBC) of municipal solid waste (MSW) landfill leachates. MetPLATE, an assay specific for heavy metal toxicity, was used to determine the HMBC of MSW leachates collected from 14 sites in Florida, with a wide range of chemical and physical characteristics. The leachates displayed a low toxicity which was attributed to the site-specific parameters, including, high concentrations of both organic and inorganic ligands. The HMBC test was undertaken to measure the effect of these site-specific parameters on metal toxicity. The potential for MSW leachate to bind and, thus, detoxify heavy metals was investigated with copper, zinc, and mercury. The HMBC values obtained ranged from 3 to 115, 5 to 93 and 4 to 101 for HMBC-Cu+2, HMBC-Zn+2, and HMBC-Hg+2, respectively. Additionally, the high strength leachates displayed the highest binding capacities, although the landfills sampled represented a wide range of characteristics. For comparison, the HMBC values reported with local lake water, Lake Alice and Lake Beverly, and a wastewater treatment plant effluent were all below 3. A partial fractionation of MSW leachate samples from sites 1, 5 and 8, was conducted to further investigate the influence of selected site-specific physico-chemical parameters on metal binding. The fractionation revealed that the HMBC of the leachate samples was heavily influenced by the concentration of solids, organics and hardness.     

Use of hydra for chronic toxicity assessment of waters intended for human consumption

Methods developed with the cnidarian, Hydra attenuata (Pallas), have proven effective for screening acute toxicity in aqueous samples, whereas their use in revealing (sub)chronic toxic effects have had mitigated success. We therefore sought to explore manifestations of hydra mortality and abnormal morphological changes, as well as the reproductive capacity of hydras to further enhance the bioassay sensitivity and to assess (sub)chronic toxicity. These parameters were recorded following the onset of experiments after 8, 12 and 19-21 days of hydra exposure. Results obtained with potable waters (30 brands of bottled waters and artesian waters from 9 wells) showed chronic sublethal and lethal effects or reproduction rate inhibition for most samples. The effectiveness of the hydra toxicity test was demonstrated in comparison with other widely used bioassays. Our previous and present investigations suggest that hydra is a reliable and relevant test organism for the assessment of acute and chronic water toxicity.     

Application of biological safety index in two Japanese watersheds using a bioassay battery

In order to integratedly evaluate the biological safety as a water quality index, an assessment method based on three toxicity tests (algae growth inhibition, daphnia immobilization and larval fish toxicity) was developed. In this study, the developed method was used to screen, evaluate and rank the biological safety of small rivers near agricultural, industrial and residential areas. Twenty-seven representative water samples were collected from the Kaname River watershed and the Hinata River watershed in Kanagawa Prefecture, Japan. The results indicated that (1) the biological safety of water from the Hinata River ranked much higher than those from the Suzu River and the Shibuta River due to less human activities, (2) the biological safety from outlets of paddy fields ranked much worse than those from point source discharges of toxic pollutants, (3) the use of pesticides significantly affected the water quality of nearby small rivers and ditches during the pesticide application season, (4) the effects of different kinds of pesticides could successfully be classified using one toxicity test component of the bioassay battery, and (5) there was no significant quantitative relationship between the toxicity and dissolved organic carbon (DOC) for the studied water samples. The toxicities of water samples in this study were in agreement with the concentrations of pesticides determined with chemical methods by other researchers, which demonstrated that the developed assessment method was reliable to screen site contaminated with organic chemicals for priority management.     

Interaction between components of electroplating industry wastes. Influence of the receiving water on the toxicity of the effluent

A copper-cadmium-nickel-zinc mixture was assessed in seven different river waters to study metal toxicity to the ciliate protozoan Colpidium campylum, the interactions occurring between metals, and the influence of the receiving water on toxicity. In the range of concentrations tested, which are representative of electroplating industry wastes, the main part of the toxicity can be attributed to copper and to cadmium-copper synergy. A classification of waters, based on a principal component analysis (PCA), was used to examine the main parameters of the water, which can affect the toxicity of metal mixtures. It appears that the mineralization of the water, more than the total organic carbon (TOC), is an important parameter for the expression of toxicity. A strategy for the estimation of ecotoxicological hazard assessment, based on a simplified factorial experiment is proposed. It enables one to study, in a two-step bioassay, the toxicity of an effluent, the influence of river water on its toxicity, and the effects of contact time and dilution. By applying PCA to data from very different waters, it may be possible to estimate the ecotoxicological risk associated with the discharge of an effluent, on the basis of the chemistry of the receiving water.     

Evaluation of the Hormosira banksii (Turner) desicaine germination and growth inhibition bioassay for use as a regulatory assay

A germination and growth inhibition bioassay using the marine macroalga, Hormosira banksii, was evaluated for use as a standard method for direct toxicity assessment testing in the Australasian region. H. banksii is the dominant macroalga and an important primary producer in temperate coastal zones of Australasia and is therefore relevant as a test organism. Moreover, it releases gametes readily under laboratory conditions, therefore allowing tests to be conducted year round. The test endpoints' variability and sensitivity was evaluated using ammonia, a common constituent of waste waters. The two test endpoints of germination and growth proved to be both reliable and repeatable bioassay endpoints. The coefficients of variation (CV's) for toxicity to germination and growth by ammonia ranged from 25% to 38% (n=18).     

Effects of anthracene, pyrene and benzo[a]pyrene spiking and sewage sludge compost amendment on soil ecotoxicity during a bioremediation process

The fate of spiked anthracene, pyrene and benzo[a]pyrene in soil with or without sewage sludge compost was assessed during a 6-month bioremediation process simulating landfarming. Bioassays and physico-chemical analyses were employed to monitor toxicity change in soil samples and elutriates through ten sampling campaigns. Pearson product-moment correlation coefficient was determined to measure the strength of relationship between bioassays and physico-chemical analyses. The PAH dissipation in soil was enhanced after the first water addition, and the remaining amounts at the end of the experiment were positively correlated to the number of benzene rings and the presence of sewage sludge compost. Toxicity of soil elutriates to Daphnia magna was evident at early stages, originating exclusively from sewage sludge compost amendment. The lettuce root elongation was continuously inhibited by elutriates for all the treatments including control soil, probably due to high salinity or to unaddressed leachable phytotoxic compounds that were present in the experimental soil. The newly developed direct solid-phase chronic toxicity test using ostracod (Heterocypris incongruens) succeeded in evaluating the soil-bound PAH toxicity, as PAHs could not be detected in elutriates.     

Effects of solar radiation on the fluorescence properties and molecular weight of fulvic acids from pulp mill effluents

The pulp and paper industry generates large volume of wastewater that adversely affects water resources. Lignin derived macromolecular compounds, similar to natural humic substances, are the main waste products in the pulp mill effluents. The UV-Vis and fluorescence spectroscopies were used to assess the effect of solar exposition on fulvic acids from a kraft pulp mill effluent. Solar irradiation of the solutions of these fulvic acids caused solution acidification and decay both in the UV-Vis absorbance and in the fluorescence. This decay was not the same for the whole spectra but pointed to the selective photodegradation of lignin typical structures. Furthermore, by sequential ultrafiltration it was found that during irradiation, the high-molecular weight fractions were destroyed and low-molecular-weight constituents, potentially more able to penetrate the cell membranes of living organisms were formed. Photodegradation of macromolecular organic matter from a kraft pulp mill effluent may be a key process occurring in natural waters that modifies the physicochemical properties of such effluents.     

Frozen mitochondria as rapid water quality bioassay

A rapid and relatively low cost bioassay, usable in routine screening water test has been developed modifying the beef heart mitochondria test. In our experiments, mitochondria (FM22) were frozen at -22 degrees C, instead of -80 degrees C (FM80), and their applicability and sensitivity was verified. The oxygen consumption was measured by a Clark electrode that was interfaced to a PC to collect test analysis data. Blank tests were carried out to verify the oxygen consumption linear fitting. Toxicity tests were performed using pure organic and inorganic compounds, such to verify the FM22 sensitivity. A piecewise regression, through an Excel Macro, identified the break-point in the oxygen consumption and calculated the toxicity. The IC50s of the tested compounds were calculated and ranged from 0.123 to 0.173 mg/l for heavy metals (Cd, Cr, Cu, Ni, Pb and Zn) and from 0.572 to 10.545 mg/l for organics (benzene, DMSO, DDE, endrin, dichloromethane, chlorobenzene, 1,2-dichlorobenzene and 1,3-dichlorobenzene). Water effluent samples were then tested. The FM22 gave different toxic reactions to them. Water samples were characterised for heavy metals. The FM22 bioassay had a higher sensitivity than the FM80 and a high reproducibility in the toxicity test with pure compounds. The FM22 test was a good predictor of toxicity for water samples; the bioassay is easy, low cost and rapid, then usable for routine tests.     

Comparative toxicity of effluents processed by different treatments in V79 fibroblasts and the algae Selenastrum capricornutum

The efficacy of ozonation and of photocatalysis processing in the treatment of pulp mill ECF (elementary chlorine free) bleaching and textile effluents was evaluated by determining total organic carbon reduction (TOC) and the toxicity. The chronic toxicity of the effluents was evaluated by the ability to inhibit the growth of algae Selenastrum capricornutum. Cultured hamster V79 fibroblasts were used to assess the cytotoxicity of effluents submitted to different detoxification processes. Two endpoints were measured in V79 cells: 3-(4,5-dimethylthiazole-2-yl)-2,5-biphenyl tetrazolium bromide (MTT) reduction and neutral red uptake (NRU). Both treatment processes were able to reduce the TOC, although ozonization was less effective for pulp mill ECF bleaching. The pulp mill ECF bleaching and textile effluents reduced the growth of S. capricornutum by 39% and 27%, respectively. However, at the highest concentration tested, the textile effluents treated by photochemical process for 60 min showed increased cytotoxicity in V79 cells compared to the untreated effluent when assessed by the NRU and MTT reduction assays (increases of 30% and 40%, respectively). Pulp mill ECF bleaching effluent treated by ozonization had a similar cytotoxicity to that of untreated effluent in the NRU assay. In contrast, the MTT reduction assay indicated that effluents treated with ozone were around 20% more cytotoxic than untreated effluents. These results show that cultured fibroblasts may be useful for studying cellular responses to pollutants and may be included in tests to monitor the efficiency of effluent detoxification processes.     

Determination of optimum polymeric coagulant in palm oil mill effluent coagulation using multiple-objective optimisation on the basis of ratio analysis (MOORA)

The main limitation of a conventional palm oil mill effluent (POME) ponding system lies in its inability to completely decolourise effluent. Decolourisation of effluent is aesthetically and environmentally crucial. However, determination of the optimum process parameters is becoming more complex with the increase of the number of coagulants and responses. The primary objective of this study is to determine the optimum polymeric coagulant in the coagulation–flocculation process of palm oil mill effluent by considering all output responses, namely lignin–tannin, low molecular mass coloured compounds (LMMCC), chemical oxygen demand (COD), ammonia nitrogen (NH₃-N), pH and conductivity. Here, multiple-objective optimisation on the basis of ratio analysis (MOORA) is employed to discretely measure multiple response characteristics of five different types of coagulants as a function of assessment value. The optimum coagulant is determined based on the highest assessment value and was identified as QF25610 (cationic polyacrylamide). On the other hand, the lowest assessment value was represented by AN1800 (anionic polyacrylamide). This study highlights the simplicity of MOORA approach in handling various input and output parameters, and it may be useful in other wastewater treatment processes as well.     

Duckweed (Lemna gibba) growth inhibition bioassay for evaluating the toxicity of olive mill wastes before and during composting

Two-phase olive mill waste (TPOMW) is considered the main problem confronting the modern oil extraction and processing industry. Composting has been recently proposed as a suitable method to treat TPOMW so that it is suitable for use in agriculture. In the work reported here, the Lemna gibba bioassay was tested to assess the toxicity of TPOMW before and during the composting process. The method was compared with the Lepidium sativum bioassay and with other chemical maturity indices traditionally reported in the literature. The L. gibba test proved to be a simple, sensitive, and accurate method to evaluate toxicity before and during the composting of TPOMW. Plant growth response was measured by two methods: counting the number of fronds (leaves) and measuring total frond area (TFA) with image analysis software. Compared to the counting of fronds (L. gibba) or seeds (L. sativum), the use of area-measuring software permitted a very rapid, unbiased and easy way of analysing the toxicity of TPOMW before and during composting. Although the accuracy of the frond count method was similar to the traditional cress seed test, data analysis showed that the TFA measurement method was statistically more accurate (significantly lower variance) than the frond count approach. Highly significant correlations were found between TFA and some important maturation indices commonly reported in literature indicating that the L. gibba bioassay can be a useful tool to determine the degree of maturity of TPOMW composts.     

Determining algal-available phosphorus in pulp and paper mill effluents: algal assays vs routine phosphorus analyses

We determined the potentially algal-available P (P(aa)) in pulp and paper mill effluents by two bioassay techniques (a dual-culture assay and a batch approach) and compared it with chemically analysed P (total P, total dissolved P, reactive P, dissolved reactive P and dissolved hydrolysable P). The mean P(aa) given by the dual-culture assay was within a 40% range of that given by the batch approach. The P(aa) obtained by both bioassays differed from total P. Dissolved reactive P appeared to be the most readily available chemical P fraction, but other P fractions also contributed to P(aa). The analysis of reactive P, which involves direct staining of an unfiltered sample, best approximated the P(aa) given by the dual-culture assay (relative error 9%). The results suggest that assessment of eutrophying effluent P can be improved by analysing simple chemical P fractions in wastewater. The fractions to be analysed, however, may be site specific.     

慧星试验对水体安全性分析研究

利用彗星试验检测苏南某湖泊湖心区、长江某取水口及其给水处理厂出水水样的遗传毒性,并对结果进行分析研究.结果表明,各水样均能引起DNA损伤,在丰水期致DNA损伤作用的大小顺序为给水厂出水水样＞湖泊水样＞长江取水口水样;在枯水期致DNA损伤作用的大小顺序为湖泊水样＞长江取水口水样＞给水厂出水水样.随着染毒剂量的加大,细胞损伤率增加,细胞受损的程度也在加重,并向3、4级损伤集中,呈明显的剂量-效应关系.