A New Approach to Plant Diversity Assessment Combining HPLC Data, Simplex Mixture Design and Discriminant Analysis

The quantitative assessment of plant diversity and its monitoring with time represent a key environmental issue for management and conservation of natural resources. Assessment of plant diversity could be based on chemical analyses of secondary metabolites (e.g. flavonoids, terpenoids), because of the substantial quantitative and qualitative between-individual variability in such compounds. At a geographical scale, the plant populations become widely dispersed, and their monitoring from numerous routine individual analyses could become restricting. To overcome such constraint, this study develops a multivariate calibration model giving the relative frequency of a particular taxon from a simple high-performance liquid chromatography (HPLC) analysis of a plant mixture. The model was built from a complete set of mixtures combining different taxons, according to an experimental design (Scheffé’s matrix). For each mixture, a reference HPLC pattern was simulated by averaging the individual HPLC profiles of the constitutive taxons. The calibration models, based on Bayesian discriminant analysis (BDA), gave statistical relationships between the contributions of each taxon in mixtures and reference HPLC patterns of these mixtures. Finally, these models were validated on new mixtures by using outside plants. This new biodiversity survey approach is illustrated on four chemical taxons (four chemotypes) of Astragalus caprinus (Fabaceae). The more differentiated the taxon, the better predicted its contributions (in mixtures) were by BDA calibration model. This new approach could be very useful for a global routine survey of plant diversity.     

A comparison of techniques to sample salamander assemblages along highland streams of Maryland

Amphibians may be useful indicators of biological condition in small streams so determining which sampling technique maximizes encounters at the least cost and at the optimal time of year is important. Area constrained surveys (ACS), used by the Maryland Biological Stream Survey, were tested against cover board surveys, drift fences with pitfall and funnel traps, quadrat leaf litter searches, and leaf litter bags. Sixteen, 100 m-long sites were established in headwater streams in the Savage River State Forest in Garrett County, Maryland. Each technique was randomly assigned to a 25 m stream section within each overall sampling site, and sites were sampled once each month from May to October (2005) with additional sampling in March and April (2006). Area constrained surveys yielded means of 2.7 taxa and 14.9 total individuals per sampling visit, which was significantly higher than the yield of all other methods in all months except October and March, when yields were low for all techniques. Area constrained surveys were also significantly more cost-effective per taxon and per individual compared to all other methods. September produced the most taxa and individuals, October and March produced the least, and yields for April through August were similar to September. We employed removal sampling at four sites in April 2006, but abundance could not be estimated because a significant linear decrease in the accumulated catch versus catch per unit effort did not occur for three of the sites.     

Comparison between electrofishing and snorkeling surveys to describe fish assemblages in Laurentian streams

We evaluated the relative performance of electrofishing and visual surveys (snorkeling) for estimating the abundance of combinations of fish species and size classes in rivers. We also assessed the effect of environmental conditions on potential differences between the results obtained using these two sampling methods. Sampling sites were distributed in the Laurentian region of Québec. Both methods were used while sections were blocked. Three snorkelers swam the river sections upstream while identifying and counting fish of each species and size classes. Three-pass electrofishing was performed in the same sites and abundances were estimated with a maximum likelihood depletion model. Greater abundances of fish were observed by snorkeling than by electrofishing at all sites. Snorkeling species richness was higher or equal to electrofishing richness in, respectively, 60 % and 40 % of sampled sites. Differences in the fish communities observed by both sampling methods were not related to environmental conditions. The results of our work are therefore contrary to that of most published studies that suggested the use of electrofishing over visual surveys. This study highlights that conclusions derived from previous work on sampling gear comparisons may not be generalisable; rather survey methods might benefit from being selected based on fish community composition.     

Location and Characterization of Emission Sources for Airborne Volatile Organic Compounds Inside a Refinery in Taiwan

This study aimed to locate VOC emission sources and characterized their emitted VOCs. To avoid interferences from vehicle exhaust, all sampling sites were positioned inside the refinery. Samples, taken with canisters, were analyzed by GC–MS according to TO-14 method. The survey period extended from Febrary 2004 to December 2004, sampling twice per season. To interpret a large number of VOC data was a rather difficult task. This study featured using ordinary application software, Excel and Surfer, instead of expensive one like GIS, to overcome it. Consolidating data into a database on Excel facilitated retrieval, statistical analysis and presentation in the form of either table or graph. The cross analysis of the data suggested that the abundant VOCs were alkanes, alkenes, aromatics and cyclic HCs. Emission sources were located by mapping the concentration distribution of these four types of VOCs in terms of contour maps on Surfer. During eight surveys, five emission sources were located and their VOCs were characterized.     

Aerial Monitoring of Marine Waterfowl in the Alaskan Beaufort Sea

The purpose of this study was to design and test a monitoring protocol for marine waterfowl in the central Alaskan Beaufort Sea. The study provides an important case-study of how a long-term monitoring program may be affected by unanticipated human disturbances.Because of its overwhelming and widespread abundance, relatively sedentary behavior, ease in counting, and the extensive historical database, the long-tailed duck (Clangula hyemalis) was selected as the focal species. Two null hypotheses were formulated concerning potential changes in the numbers and distribution of long-tailed ducks in relation to disturbance in an industrial study area, compared to a reference study area located about 50 km to the east.A 9-year historical database (1977–1984, 1989) of long-tailed duck densities and other important data recorded during systematic aerial surveys was analyzed retrospectively using multiple regression techniques. The retrospective analyses determined which of several predictor variables recorded were significantly related to long-tailed duck density. Separate analyses were conducted for two periods: (1) the overall period when long-tailed ducks were present in the lagoon study areas, and (2) the shorter adult male molt period. The results of the two analyses indicated that 57% and 68%, respectively, of the total variation in long-tailed duck density during the two periods could be explained by variables recorded during the surveys. Predictor variables representing habitat, day of the year, time of day, amount of ice, and wave height recorded on-transect during surveys were most closely associated with long-tailed duck density. Measurement error during the surveys, and influences outside the study area such as nesting success in tundra habitats and mortality during migration and in over-wintering areas likely also had strong influences on the results, but these factors were not measurable in our study.Based on results of the retrospective analyses, a long-term monitoring protocol consisting of a program of systematic aerial surveys and an analyses of variance and covariance (ANOVA and ANCOVA) statistical procedure was designed and initially tested in 1990 and 1991. This 2-year testing phase resulted in several revisions to the monitoring protocol. Refinements were made to the original sampling procedures, to the survey schedule, and to the recommended statistical analysis procedures. Results of the ANOVA and ANCOVA indicated that there was no evidence of a change in long-tailed duck densities that could be attributable to disturbance (from any source) in the industrial study area relative to a reference area with no industrial development. Other analyses indicated that the sampling and analysis procedures would be adequate to detect long-term trends in long-tailed duck density and localized disturbance effects, but that the monitoring program should be continued well beyond two years to detect statistically significant changes. As a result, additional aerial surveys of both study areas were conducted again during 1999–2001.Results of the revised ANOVA and ANCOVA of the 1990–1991 and 1999–2001 survey data indicated that the density of long-tailed ducks had significantly declined in coastal lagoons along the central Alaskan Beaufort Sea coast during the study period. In addition, disturbances throughout the barrier island-lagoon systems used by these ducks, including both the industrial and the reference study areas, had significantly increased over the same period. However, because unanticipated disturbances from a variety of anthropogenic sources, and not just industry sources, increased in both study areas, the reference study area was not an effective statistical control. As a result, the decline in long-tailed duck density in both study areas was not attributable to industry-related activities. Although the monitoring protocol described here is an effective method to detect statistically significant changes in long-tailed duck distribution and abundance in the nearshore Alaskan Beaufort Sea, many more years of sampling would be necessary to attribute observed changes to industry-related disturbances.     

Comparison of three sampling and analytical methods for the determination of airborne hexavalent chromium

A field study was conducted with the goal of comparing the performance of three recently developed or modified sampling and analytical methods for the determination of airborne hexavalent chromium (Cr(VI)). The study was carried out in a hard chrome electroplating facility and in a jet engine manufacturing facility where airborne Cr(VI) was expected to be present. The analytical methods evaluated included two laboratory-based procedures (OSHA Method ID-215 and NIOSH Method 7605) and a field-portable method (NIOSH Method 7703). These three methods employ an identical sampling methodology: collection of Cr(VI)-containing aerosol on a polyvinyl chloride (PVC) filter housed in a sampling cassette, which is connected to a personal sampling pump calibrated at an appropriate flow rate. The basis of the analytical methods for all three methods involves extraction of the PVC filter in alkaline buffer solution, chemical isolation of the Cr(VI) ion, complexation of the Cr(VI) ion with 1,5-diphenylcarbazide, and spectrometric measurement of the violet chromium diphenylcarbazone complex at 540 nm. However, there are notable specific differences within the sample preparation procedures used in three methods. To assess the comparability of the three measurement protocols, a total of 20 side-by-side air samples were collected, equally divided between a chromic acid electroplating operation and a spray paint operation where water soluble forms of Cr(VI) were used. A range of Cr(VI) concentrations from 0.6 to 960 microg m(-3), with Cr(VI) mass loadings ranging from 0.4 to 32 microg, was measured at the two operations. The equivalence of the means of the log-transformed Cr(VI) concentrations obtained from the different analytical methods was compared. Based on analysis of variance (ANOVA) results, no statistically significant differences were observed between mean values measured using each of the three methods. Small but statistically significant differences were observed between results obtained from performance evaluation samples for the NIOSH field method and the OSHA laboratory method.     

Non-detection errors in a survey of persistent, highly-detectable vegetation species

Rare, small or annual vegetation species are widely known to be imperfectly detected with single site surveys by most conventional vegetation survey methods. However, the detectability of common, persistent vegetation species is assumed to be high, but without supporting research. In this study, we evaluate the extent of false-negative errors of perennial vegetation species in a systematic vegetation survey in arid South Australia. Analysis was limited to the seven most easily detected persistent vegetation species and controlled for observer skill. By comparison of methodologies, we then predict the magnitude of non-detection error rates in a second survey. The analysis revealed that all but one highly detectable perennial vegetation species was imperfectly detected (detection probabilities ranged from 0.22 to 0.83). While focussed in the Australian rangelands, the implications of this study are far reaching. Inferences drawn from systematic vegetation surveys that fail to identify and account for non-detection errors should be considered potentially flawed. The identification of this problem in vegetation surveying is long overdue. By comparison, non-detection has been a widely acknowledged, and dealt with, problem in fauna surveying for decades. We recommend that, where necessary, vegetation survey methodology adopt the methods developed in fauna surveying to cope with non-detection errors.     

Patchy Distribution Fields: An Interleaved Survey Design and Reconstruction Adequacy

A mathematical model was used to compare the effects of a regular (one-pass) or interleaved (two-pass) acoustic survey on the adequacy of reconstructing patchy distribution fields. The model simulates fish or plankton patches of different shapes and spatial orientations, and a set of parallel or zigzag transects forming a regular or interleaved acoustic survey. The efficiency of a survey is determined by the adequacy of a reconstructed field to that originally generated, which is evaluated by calculating their correlations. Regarding the immovable fields, the efficiency of a regular or interleaved acoustic survey was tested with the following two alternative assumptions: (1) the entire survey was completed; (2) the survey was interrupted for some reason at the moment when one transect remained non-accomplished. In the former case, the efficiencies of both acoustic surveys were nearly the same; in the latter case, the efficiency of an interleaved survey was superior to that of a regular one. With respect to movable fields, the efficiency of the completed interleaved surveys was even higher than that of the regular ones. Thus, the results obtained allow us to conclude that an interleaved survey is expedient in cases where there is no preference regarding the position of a vessel for further work.     

Prototyping a Vision for Inter-Agency Terrestrial Inventory and Monitoring: a Statistical Perspective

A demonstration project in Oregon examined the feasibility of combining Federal environmental monitoring surveys. An integrated approach should remove duplication of effort and reduce the possibility of providing apparently conflicting information to policy makers and the public. Data collection teams made photo interpretation measurements and on-site soil/vegetation/animal observations at locations that were selected from the Forest Inventory and Analysis (FIA), National Forest System (NFS) Region 6, and National Resource Inventory (NRI) surveys in a six-county area in Northern Oregon. The project demonstrated the feasibility of conducting a combined FIA/NFS/NRI survey and suggests an approach that will preserve the utility of the critical historical information from these surveys. We suggest a framework for estimating the extent of forest and range land that explains FIA/NRI differences and provides a common basis for both surveys. We suggest indicator and protocol criteria that will allow consistent national and regional estimates over all vegetation types, and stress the importance of including measurement repeatability in the design of the combined survey.     

Detecting Differences in Crown Transparency Assessments Between Countries using the Image Analysis System Croco

Estimates of crown transparency calculated using the semi-automatic image analysis system CROCO were compared withthe visual estimates of survey teams from 12 European countries.For each of five European species (Norway spruce (Picea abies (L.) Karst.), silver fir (Abies alba Mill.), Scotspine (Pinus sylvestris L.), beech (Fagus sylvatica L.), oak (Quercus robur L.)) 15 trees were assessed. In 64\% of the comparisons, CROCO estimates and the survey teams' scores differed significantly, while differences between countries were significant in 58 % of all comparisons. We calculated Spearman's rank correlation and the standard deviation of the differences between CROCO and each country and between pairs of countries. We then computed the medians for CROCO and each country. CROCO and only a few countries hadfor all species a higher median correlation and lower median standard deviation than the median for the comparison between countries. In addition no country had a consistently higher correlation or lower standard deviation than CROCO. We concludethat CROCO can provide more consistent and less variable estimates of crown transparency than visual assessments and that it can serve as a reference to detect differences in visualtransparency assessments between countries over time.     

Should foliar cadmium concentrations be expressed on a dry weight or dry ash weight basis?

Foliar analysis is a valuable tool for evaluating the pollution status of forests. However, the use of foliar diagnosis in large-scale surveys is a complicated process owing to the high variability within the crown. The method used to express foliar concentrations has often been found to diminish the variability. The effect of the method used to express element concentrations on the spatial variability of cadmium (Cd) in the leaves of crack willow (Salix fragilis L.) was investigated by sampling the leaves of one willow at 292 locations in the crown, each sampling location having a volume of 0.027 m3 (0.3 m x 0.3 m x 0.3 m). Cadmium showed a distinct spatial trend in the crown of the tree. Concentrations as low as 2.4 mg kg(-1) dry weight (DW) or 23.1 mg kg(-1) dry ash weight (DAW) were obtained in the top of the crown, and 10.6 mg kg(-1) DW or 73.0 mg kg(-1) DAW in the bottom of the crown. The lower relative standard deviation and weaker correlation with the sampling height support the use of DAW in large-scale surveys especially. The lower variability of the DAW Cd concentration makes this variable less sensitive to fluctuations caused by differences in growing conditions and sampling methodology. However, the majority of publications in this field report metal concentrations on a DW basis. Therefore, the restrictions set on the use of results expressed on a DAW basis in large-scale surveys of foliar metal concentrations have to be offset against the advantages offered by a reduction of the variability in metal concentrations.     

Linking satellite and field survey data,through the use of gis,as implemented in Great Britain in the Countryside Survey 1990 project

The Institute of Terrestrial Ecology (ITE) has been studying land use and the effects of land use on ecology for two decades. A series of national field surveys have been undertaken by the Land Use Section of ITE since 1978, the most recent being Countryside Survey 1990 (CS1990). The three-year project brought together field survey and remote sensing data which were analyzed using Geographical Information Systems (GIS). National and regional land-cover patterns were described and changes estimated.The data collected by the field survey part of CS1990 recorded stratified samples based on a land classification. Thematic maps for surveyed 1-km squares covered physiography, agriculture and semi-natural vegetation, forestry, structures and boundaries. The same sites were surveyed in 1984 and 1990 with 14 000 digital maps produced describing both years. GIS was used to generate stock figures for each year, and overlay allowed change between survey dates to be estimated.GIS was used to compare data collected from both field survey and satellite imagery so that both sets of information could be qualified when expressed as national figures.This paper describes the historical development of the ITE Land Classification, examines the way in which data were collected for surveys, with particular reference to Countryside Survey 1990, and shows how satellite and field survey data can be linked through GIS.     

Composition and concentration of hydrocarbons in sediment samples from the oil producing area of the East Shetland Basin, Scotland

The East Shetland Basin is one of the areas that the Fisheries Research Services (FRS) has concentrated on to assess the possible impacts of oil exploration and production on the marine environment. A stratified random survey of the sediment was carried out in 2002. TOCs were low across the basin and were positively correlated with grain size. The total PAH concentrations (2- to 6-ring parent and alkylated PAHs, including the 16 US EPA PAHs) were less than 150 microg kg(-1) dry weight and their composition indicated a predominantly pyrolytic input to the basin in 2002. Minor unresolved complex mixtures in the n-alkane profiles indicated a slight petrogenic input but further examination of the biomarkers (hopanes and steranes) showed a mixed North Sea and Middle Eastern source. The Middle Eastern source is likely due to inputs from shipping activity, as it is widely used as bunker fuel. Grid surveys were carried out in 1986, 1988-89 and 1994 and areas were selected for which there was data for all the historic grid surveys and the 2002 stratified random survey. Although referring to only a small part of the East Shetland Basin, comparison with these historic surveys shows clearly that the concentrations of Forties crude oil equivalents and total PAH concentrations were highest in 1988-89 and by 2002 had returned to concentrations the same as or less than observed in the original survey in 1986.     

Assessing differences in macrofaunal assemblages as a factor of sieve mesh size,distance between samples,and time of sampling

With increasing cascading effects of climate change on the marine environment, as well as pollution and anthropogenic utilization of the seafloor, there is increasing interest in tracking changes to benthic communities. Macrofaunal surveys are traditionally conducted as part of pre-incident environmental assessment studies and post-incident monitoring studies when there is a potential impact to the seafloor. These surveys usually characterize the structure and/or spatiotemporal distribution of macrofaunal assemblages collected with sediment cores; however, many different sampling protocols have been used. An assessment of the comparability of past and current survey methods was in need to facilitate future surveys and comparisons. This was the aim of the present study, conducted off the Oregon coast in waters 25–35 m deep. Our results show that the use of a sieve with a 1.0-mm mesh size gives results for community structure comparable to results obtained from a 0.5-mm mesh size, which allows reliable comparisons of recent and past spatiotemporal surveys of macroinfauna. In addition to our primary objective of comparing methods, we also found interacting effects of seasons and depths of collection. Seasonal differences (summer and fall) were seen in infaunal assemblages in the wave-induced sediment motion zone but not deeper. Thus, studies where wave-induced sediment motion can structure the benthic communities, especially during the winter months, should consider this effect when making temporal comparisons. In addition, some macrofauna taxa-like polychaetes and amphipods show high interannual variabilities, so spatiotemporal studies should make sure to cover several years before drawing any conclusions.     

Using variance components to estimate power in a hierarchically nested sampling design

We used variance components to assess allocation of sampling effort in a hierarchically nested sampling design for ongoing monitoring of early life history stages of the federally endangered Devils Hole pupfish (DHP) (Cyprinodon diabolis). Sampling design for larval DHP included surveys (5 days each spring 2007–2009), events, and plots. Each survey was comprised of three counting events, where DHP larvae on nine plots were counted plot by plot. Statistical analysis of larval abundance included three components: (1) evaluation of power from various sample size combinations, (2) comparison of power in fixed and random plot designs, and (3) assessment of yearly differences in the power of the survey. Results indicated that increasing the sample size at the lowest level of sampling represented the most realistic option to increase the survey’s power, fixed plot designs had greater power than random plot designs, and the power of the larval survey varied by year. This study provides an example of how monitoring efforts may benefit from coupling variance components estimation with power analysis to assess sampling design.     

Patchy Distribution Fields: Sampling Distance Unit of a Spiral Survey and Reconstruction Adequacy

A mathematical model is used to examine the effects of choosing various units of sampling distance of a spiral acoustic survey on the adequacy of reconstructing patchy distribution fields. The model simulates fish or plankton patches (or gaps) of different shapes and spatial orientations, and an acoustic survey by a spiral of Archimedes along which a unit of sampling distance is set. For comparison, surveys are imitated by parallel transects along which the same unit of sampling distance is set. Adequacy of the reconstructed fields to those originally generated is evaluated by calculating their correlations (r). In the case of a spiral survey, the mathematical experiments conducted show that an immovable field can be reconstructed properly (r ² > 0.70) if the ratio of the units of sampling distance to the autocorrelation radius for the field averaged in various directions d/R _av < 1.0–1.5. Regarding immovable fields, the spiral surveys ensure, practically speaking, the same adequacy of the field reconstruction as do surveys by parallel transects with the same unit of sampling distance. In regard to movable fields, a comparison of the results of spiral surveys with those of surveys by parallel transects indicates that the former may ensure even higher adequacy of the field reconstruction than do the latter, provided that the units of sampling distances in these surveys are equal to each other.     

Spatial and temporal trends in water quality in a Mediterranean temporary river impacted by sewage effluents

This paper analyzes how changes in hydrological conditions can affect the water quality of a temporary river that receives direct inputs of sewage effluents. Data from 12 spatial surveys of the Vène river were examined. Physico-chemical parameters, major ion, and nutrient concentrations were measured. Analyses of variance (ANOVA) and multivariate analyses were performed. ANOVA revealed significant spatial differences for conductivity and major ion but no significant spatial differences for nutrient concentrations even if higher average concentrations were observed at stations located downstream from sewage effluent discharge points. Significant temporal differences were observed among all the parameters. Karstic springs had a marked dilution effect on the direct disposal of sewage effluents. During high-flow periods, nutrient concentrations were high to moderate whereas nutrient concentrations ranged from moderate to bad at stations located downstream from the direct inputs of sewage effluents during low-flow periods. Principal component analysis showed that water quality parameters that explained the water quality of the Vène river were highly dependent on hydrological conditions. Cluster analysis showed that when the karstic springs were flowing, water quality was homogeneous all along the river, whereas when karstic springs were dry, water quality at the monitoring stations was more fragmented. These results underline the importance of considering hydrological conditions when monitoring the water quality of temporary rivers. In view of the pollution observed in the Vène river, “good water chemical status” can probably only be achieved by improving the management of sewage effluents during low-flow periods.     

Monitoring global change: Comparison of forest cover estimates using remote sensing and inventory approaches

Satellite-based remote sensing offers great potential for frequent assessment of forest cover over broad spatial scales, however, calibration and validation using ground-based surveys are needed. In this study, forest cover estimates for the United States from a recently developed land surface cover map generated from satellite remote sensing data were compared to state-level inventory data from the U.S. National Resources Planning Act Timber Database. The land cover map was produced at the U.S. Geological Survey EROS Data Center and is based on imagery from the AVHRR sensor (spatial resolution 1.1 km). Vegetation type was classified using the temporal signal in the Normalized Difference Vegetation Index derived from AVHRR data. Comparisons revealed close agreement in the estimate of forest cover for extensively forested states with large polygons of relatively similar vegetation such as Oregon. Larger forest cover differences were observed in other states with some regional patterns in the level of agreement apparent.Comparisons in inventory- and remote sensing-based estimates of current forested area with potential vegetation maps indicated the magnitude of past land use change and the potential for future changes. The remote sensing approach appears to hold promise for conducting surveys of forest cover where inventory data are limited or where rates of vegetation change, due to human or climatic factors, are rapid.     

Surveying drainage culvert use by carnivores: sampling design and cost�Cbenefit analyzes of track-pads vs. video-surveillance methods

Environmental assessment studies often evaluate the effectiveness of drainage culverts as habitat linkages for species, however, the efficiency of the sampling designs and the survey methods are not known. Our main goal was to estimate the most cost-effective monitoring method for sampling carnivore culvert using track-pads and video-surveillance. We estimated the most efficient (lower costs and high detection success) interval between visits (days) when using track-pads and also determined the advantages of using each method. In 2006, we selected two highways in southern Portugal and sampled 15 culverts over two 10-day sampling periods (spring and summer). Using the track-pad method, 90% of the animal tracks were detected using a 2-day interval between visits. We recorded a higher number of crossings for most species using video-surveillance (n = 129) when compared with the track-pad technique (n = 102); however, the detection ability using the video-surveillance method varied with type of structure and species. More crossings were detected in circular culverts (1 m and 1.5 m diameter) than in box culverts (2 m to 4 m width), likely because video cameras had a reduced vision coverage area. On the other hand, carnivore species with small feet such as the common genet Genetta genetta were detected less often using the track-pad surveying method. The cost-benefit analyzes shows that the track-pad technique is the most appropriate technique, but video-surveillance allows year-round surveys as well as the behavior response analyzes of species using crossing structures.     

Choosing an appropriate soil-gas survey method

Three types of soil-gas surveys were performed over the same location at an industrial facility. The surveys performed were (1) a passive technique using buried collectors, (2) an active technique in which samples were collected in the field by pumping with subsequent analysis at a field laboratory, and (3) a screening technique that employed a hand-held survey instrument. Each of the surveys had desirable features, but there was considerable variability in the quality of data obtained, cost, and ease of performance. The passive and active surveys provided excellent detection limits, but the passive technique does not provide data in real time. The active survey was also time-consuming and required an analytical chemist in the field. Neither the active nor the passive survey were able to delineate the plume of contaminated groundwater. Consequently, the results from the rapid and inexpensive reconnaissance technique provided functionally equivalent data.Publication No. 3672, Environmental Sciences Division, ORNL.Operated by Martin Marietta Energy Systems, Inc. for the U.S. Department of Energy under Contract No. DE-AC05-840R21400.