天然气储气罐破坏效应分析

针对城市天然气储气罐的不断兴建与发展趋势的大型化,对于已建和待建储罐区对周围环境的潜在安全性问题,指出运用破坏伤害范围评价法可直观地预测破坏效应。通过对储罐爆炸释放能量的估算,采用模拟比法结合TNT爆炸试验数据计算出距离储气罐不同距离处爆破冲击波超压值,运用超压准则模拟预测出不同规格、储压下储罐爆破破坏伤害严重程度及危及半径范围;采用世界银行推荐的危害关系式,结合伤害破坏等级分析天然气爆炸破坏效应并与爆破效应比较。5000m3储气罐、储压1.20MPa下,储罐爆破和天然气爆炸危及距离分别可达144.0m和247.7m。依据预测结果,可将罐区周围划分不同区域,为实际工程中罐区选址、建设、安全距离确定及安全预案制定提供参考。     

Coupling effects of the explosion shock wave and heat radiation on the dynamic response of a fixed-roof tank

The occurrence of leakage in large tank farms or oil deposits can lead to fire or explosion accidents. Coupling effects of fire and explosion loadings can cause considerably more damage to adjacent tanks or buildings than either loading individually does. In this study, the combined loadings of the explosion shock wave and heat radiation from a pool fire on a neighboring empty fixed-roof tank were numerically investigated. The effects of the explosion shock wave intensity and relative height of the explosion center [the ratio of the height of the explosion center to the height of the tank (h_r)] were analyzed. The results indicate that tanks damaged by explosion shock waves have decreased fire resistance and critical buckling temperature. Moreover, the thermal buckling deformation of the predamaged tank largely depends on the explosion shock wave. With an increase in the explosion shock wave intensity or a decrease in h_r, the explosion shock wave has greater influence on the fire resistance of the tank, and the critical buckling temperature decreases. This paper can provide an understanding of the dynamics of a tank under explosion shock wave loading, and of the critical failure criterion and failure modes of a target tank under the coupled loading of the explosion shock wave and an adjacent pool fire.     

Effect of separation distance on gas dispersion and vapor cloud explosion in a storage tank farm determined using computational fluid dynamics

Storage tank separation distance, which considerably affects forestalling and mitigating accident consequences, is principally determined by thermal radiation modeling and meeting industry safety requirements. However, little is known about the influence of separation distance on gas dispersion or gas explosion, which are the most destructive types of accidents in industrial settings. This study evaluated the effect of separation distance on gas dispersion and vapor cloud explosion in a storage tank farm. Experiments were conducted using Flame Acceleration Simulator, an advanced computational fluid dynamics software program. Codes governing the design of separation distances in China and the United States were compared. A series of geometrical models of storage tanks with various separation distances were established. Overall, increasing separation distance led to a substantial reduction in vapor cloud volume and size in most cases. Notably, a 1.0 storage diameter separation distance appeared to be optimal. In terms of vapor cloud explosion, a greater separation distance had a marked effect on mitigating overpressure in gas explosions. Therefore, separation distance merited consideration in the design of storage tanks to prevent gas dispersion and explosion.     

蒙德法在火电厂液氨储罐评价单元的应用

火电厂液氨储罐单元存在大量高纯度的液氨,一旦发生火灾、爆炸,后果极其严重。为了研究液氨储罐的火灾爆炸危险性及毒性,在对火电厂液氨储罐危险性辨识的基础上,依据液氨储罐单元的主要参数,运用蒙德法分别确定评价中需要的各种危险性系数,从而进行各项指标计算,查询危险性等级表,将各项指标进行等级划分,结论表明各项危险等级都很高。在得出结论基础上,进行安全措施补偿评价,补偿后的各种危险等级均降低,可见采取补偿措施后能够一定程度的降低火灾、爆炸、毒性的危险性,防止事故的发生。     

Investigation of the decomposition reaction and dust explosion characteristics of crystalline dicumyl peroxide

The dicumyl peroxide (DCP) is widely used as a polymerization initiator, catalyst and vulcanizing agent in the chemical industry. A number of accidents have been caused by its thermal instability in storage or manufacturing process. Thus, its hazard characteristics have to be clearly identified. First of all, the differential scanning calorimeter (DSC) is used to measure the heat of decomposition reaction, which can contribute to understanding the reaction characteristics of DCP. The accelerating rate calorimeter (ARC) is used to measure the rates of temperature and pressure rises of decomposition reaction, and then the kinetics parameters are estimated. Furthermore, the MIKE 3 apparatus and the 20-l-Apparatus are used to measure and analyze the dust explosion characteristics of DCP at room temperature and atmospheric pressure. Finally, Semenov's thermal explosion theory is applied to investigate the critical runaway condition and the stability criterion of decomposition reaction, and to build the relationship of critical temperature, convective heat transfer coefficient, heat transfer surface area and ambient temperature. These results contribute to improving the safety in the reaction, transportation and storage processes of DCP.     

基于蒙特卡洛法的储罐爆炸碎片冲击失效模型研究

为定量研究相邻储罐间爆炸碎片冲击的多米诺效应,基于蒙特卡洛方法建立爆炸碎片冲击失效模型。该模型共包括爆炸能量与碎片初始速度、考虑风速及碎片初始位置的碎片三维抛射轨迹、空气阻力、碎片冲击穿透等4个分步模型。基于上述模型,研究储罐爆炸后碎片的初始状态、抛射轨迹以及对相邻储罐的冲击效应。在数值模拟结果的基础上,用储罐最高允许工作压力代替泄放装置的泄压压力来计算爆炸压力,绘制碎片质量及初始速度的直方图,定量分析储罐间距对击中概率的影响。结果表明,热辐射、超压和碎片冲击3种能量作用方式均可能导致储罐间火灾爆炸事故多米诺现象发生,但爆炸碎片冲击导致相邻罐失效的概率较低。     

熔融硝盐高温分解爆炸事故后果严重度评价

为评价热处理用硝盐槽熔融硝盐高温分解爆炸事故机理和后果严重度,结合某企业铝合金件硝盐固溶热处理工艺进行研究。 利用压缩气体容器爆炸能量计算模型、超压准则和TNT当量法估算热处理用硝盐槽内熔融硝盐高温分解爆炸事故后果,得出35 000 kg熔融硝盐在高温分解转化率为50%时爆炸的TNT当量为1 257.6 kg,爆炸会造成半径53.97 m范围内的人员轻伤,该结果和利用政府推荐的危险指数法得出的外部防护距离为50 m较为接近。 以上分析计算表明:超温爆炸过程中,熔融硝盐在硝盐槽中超温分解快速产生大量气体,在硝盐槽上盖及上部硝盐的阻挡下不能及时排出,致使硝盐槽内气体压力瞬间升高,形成类似于压力容器的空间,发生物理爆炸并引发高温硝盐喷溅。     

基于VR技术的大型储罐火灾爆炸仿真软件设计

为了研究大型储罐事故后果的严重性，针对大型储罐火灾爆炸试验难以实施的情况，以虚拟现实技术为研究手段，重现大型储罐火灾和爆炸事故过程；通过对储罐火灾和爆炸事故进行理论分析，优选出大型储罐火灾爆炸事故后果数学模型；基于某商业原油储备库布置，利用3Ds Max软件对库区进行建模，结合Qt界面编写技术和OSG粒子效果技术进行交互式设计，划分火灾和爆炸2大仿真模块，设计各模块下属基本功能，形成1套基于真实场景的大型储罐火灾爆炸事故后果三维仿真模拟软件。研究结果表明:基于VR技术的大型储罐火灾爆炸仿真软件具有较强的沉浸感和交互性等特点，能够实时仿真大型储罐火灾爆炸事故动态演变过程，降低大型储罐火灾爆炸试验成本，同时为制定事故应急预案和应急处置措施提供科学参考。     

氨分解装置中液氨储罐火灾爆炸危险性分析

以某金属处理企业氨分解装置中液氨储罐罐区为例,对液氨泄漏后火灾爆炸事故及其伤害范围进行了研究,用池火、蒸气云爆炸和沸腾液体扩展蒸气爆炸模型进行计算分析,给出火灾、爆炸事故的人员伤害和财产损失范围。结果表明:围堤堤内池火或罐内池火时,罐区建构筑物内的汽化器、管道等设备会因直接过火或热辐射导致损坏,建筑内人员死亡,但难以波及罐区之外;蒸气云爆炸产生相当于1192.72kgTNT爆炸的当量,爆炸的后果严重,应重点防范,防范的重点为液氨泄漏、点火源;沸腾液体扩展蒸气爆炸的火球半径56.1m,持续时间8.7s,死亡半径27.2m,其源于储罐受热或系统突然失效,液体瞬时泄漏汽化并遇点火源而发生,具有突发性且后果严重,企业应高度重视并严格储罐及系统的定期检验与校验、密切关注系统的有效运行。     

Study of the situation deduction of a domino accident caused by overpressure in LPG storage tank area

The production and storage of liquefied petroleum gas (LPG) is gradually becoming larger and more intensive, which greatly increases the risk of the domino effect of an explosion accident in a storage tank area while improving production and management efficiency. This paper describes the construction of the domino effect scene of an explosion accident in an LPG storage tank area, the analysis of the characteristics of the LPG tank explosion shock wave and the target storage tank failure, and the creation of an ANSYS numerical model to derive the development trend and expansion law of the domino accident in the LPG storage tank area. The research showed that: 400 m³ tank T1 explosion shock waves spread to T2, T4, T5, T3, and T6, and the tank overpressures of 303 kPa, 303 kPa, 172 kPa, 81 kPa, and 61 kPa respectively. The critical values of the target storage tank failure overpressure-range threshold were 70 kPa and 60 m. After the explosion of the initial unit T1 tank, at 38 ms, the T2 and T4 storage tanks failed and exploded; at 56 ms, the T5 storage tank exploded for the third time; at 82 ms, the T3 storage tank exploded for the fourth time; and at 102 ms, the T6 storage tank exploded for the fifth time. With the increase of explosion sources, the failure overpressure of the target storage tank increased, and the interval between explosions continuously shortened, which reflected the expansion effect of the domino accident. The domino accident situation deduction in the LPG storage tank area provided a scientific basis for the safety layout, accident prevention and control, emergency rescue, and management of a chemical industry park.     

储油条件下拱顶油罐的油气爆炸实验

为研究储油条件下拱顶油罐油气爆炸的发展过程,设计了中尺度拱顶油罐油气爆炸实验台架,并完成了储油条件下油罐油气爆炸试验。实验结果表明:储油条件下油气爆炸会导致罐顶破坏,超压发展分为多个阶段,并出现强烈的超压振荡和二次爆炸现象,最大超压由二次爆炸所产生;爆炸最大超压随着初始油气体积分数的降低而升高;在储油条件下,油罐油气爆炸后会诱导产生二次爆炸现象,第2次爆炸超压峰值和升压速率均远大于第1次爆炸的数值,且二次爆炸对外场的影响更加明显;火焰强度随时间的变化曲线具有2个明显的峰值,其形成原因分别为第1次爆炸和第2次爆炸。     

Process loss prevention of petrochemical process: A case study of the flashing accident of the storage tank on acrylonitrile-butadiene-styrene powder in Taiwan

Qualitative analysis, process hazard analysis, thermal evaluation, and fault tree analysis were applied to a flashing accident involving a storage tank that contained acrylonitrile-butadiene-styrene (ABS) powder in Taiwan. The accident was caused by combustible powder attached to the inner wall of the tank reaching a high temperature and then melting. Thereafter, the molten powder became glue-like and dropped onto the ABS powder, burning at the tank bottom, causing decomposition of the styrene and butadiene derivatives as well as other combustible gases. The high concentration of combustible powder and low ignition temperature triggered the powder, initiating a dust explosion. Finally, we analyzed the findings of each method and examined the properties of ABS powder, realizing that the root cause of the accident included an insufficient understanding of the characteristics of ABS and the failure to comply with the management procedures of hot work. Recommendations and countermeasures were proposed that could proactively ameliorate process safety.     

大型原油储罐泄漏隔堤池火灾后果研究

为了研究储罐大孔泄漏后可能产生的隔堤局部面状液池火灾,以10万立方大型原油储罐为例,采用计算流体力学软件FLUENT和火灾模拟软件FDS计算储罐在真实泄漏场景下的液池区域,模拟发生隔堤池火的分布特征及对临罐热辐射影响。研究结果表明:储罐原油泄漏后将在隔堤内形成相对稳定面积的液池,在储罐不同方位处泄漏形成的液池面积与储罐壁距雨水收集槽长度相关;储罐正下方的隔堤池火对储罐造成的热辐射极大;风对临罐受到的池火热辐射强度影响明显,指向罐组中心方向的来风对临罐热辐射强度影响较大。     

Critical runaway conditions and stability criterion of RDX manufacture in continuous stirred tank reactor

The energetic material cyclo-1,3,5-trimethylene-2,4,6-trinitramine (RDX) has been widely used as explosive and propellant ingredients in the military industry. It is usually produced by hexamine nitration reaction in continuous stirred tank reactor (CSTR). This manufacturing process is quite dangerous and always causes fire incidents or explosion owing to its thermal instability in its nitration reaction or purification processes. In this investigation, we used its reaction kinetics parameters to evaluate the thermal hazard conditions and stable reaction criteria in the reaction systems of continuous stirred tank reactor.     

LNG加气站槽车卸车直供过程泄漏后果分析*

为研究LNG加气站槽车直接供液过程泄漏后果严重程度,采用HAZOP辨识槽车供液和储罐供液典型泄漏场景,基于PHAST分析不同泄漏场景下LNG液池半径、蒸汽云扩散距离及积聚时长、爆炸超压和池火热辐射影响范围,定量评价槽车供液可能造成的事故后果扩大程度。结果表明:槽车供液泄漏事故的LNG液池最大半径、蒸汽云最大扩散距离、爆炸超压最大影响半径和池火热辐射最大半径,分别为储罐供液的5.7,1.7,2.3,7.9倍;槽车在无人值守条件下泄漏形成的LNG液池最大半径和蒸汽云积聚时长,分别为有人值守下的1.85,56倍;日供液量较大加气站不宜采用槽车直接为汽车供液模式,而应采用先卸车入罐、再储罐供液的模式;应落实槽车卸车轮班值守制度,并与周边社区建立有效的应急联动方案。     

Effect of bubble generation on hot zone formation in tank fires

Boilover is a phenomenon that both stakeholders and fire-fighters in the petrochemical industry try to avoid. This phenomenon results in an explosion of liquid hydrocarbon materials (e.g., crude oil) due to prolonged oil tank fires. The elevated temperature provides energy to vaporize the water sub-layer, which commonly resides at bottom of storage tanks, leading to tremendous fire enlargement as fuel tends to spill over around the tank. Boilover follows the formation of an isothermal layer called ‘hot zone’, and is typically accompanied by continuing bubble appearance in the hot zone. Previous studies have suggested that bubble generation could be a driving force for boilover, as it accelerates heat mixing. However, the effect of bubble generation on the mechanism of hot zone formation has not yet been systematically studied. This work investigates the effect of bubble formation on hot zone formation by installing a metal mesh in a burning fuel container. The size of the mesh grid and the position of the mesh are varied to generate bubbles with different volumes from different depths from the fuel surface. Experimental results demonstrate that the metal mesh definitely increases the volume of bubbles, and significantly reduces the time to form a hot zone. The mesh with small grids generates more bubbles than that with large grids. Additionally, bubbles start to generate earlier when the mesh is fixed nearer the fuel surface. Experimental results provide direct evidence of the bubble effect on hot zone formation.     

有机硅工厂火灾安全评价研究

针对有机硅工厂的水解单元、缩合单元、过滤单元、成品仓库、原料罐区,以美国道化学公司的火灾、爆炸危险指数评价法,定量地对潜在火灾、爆炸和反应危险性进行评价,得到在没有采用任何安全措施的情况下,水解单元、缩合单元、成品仓库单元和原料罐区单元的危险等级均为“较轻”,过滤单元的危险等级为“最轻”。利用CFAST软件对成品仓库所在建筑进行20min火灾发生过程的模拟,确定了设定参数下成品仓库无开口部位时在310～1090s之间、有开口部位时在340～400s之间均会对人造成直接烧伤或吸入热气体的伤害。得出当火灾发生后,非救援人员需在310s之前离开成品仓库才能保证安全。     

Investigation on the self-decomposition and explosion hazard of azo compounds

Azo compounds are self-reactive chemicals that violently produce flammable gases with heat release (i.e., an exothermic reaction). However, the explosion mechanism and ignition probability of azo compounds have not been clearly defined for storage or transportation. In this study, explosion scene analyses and various pyrolysis tests were performed to evaluate the thermal decomposition characteristics and explosion phenomena of azo compounds in a storage facility. The chemical debris collected from a fire scene was determined to be similar to the pyrolyzate of one of the tested azo compounds used by Py-GCMS. The minimum amounts of azo compounds, which could be ignited by self-decomposition heat, were calculated from the results of differential scanning calorimetrys and the heat transfer equation. The results were used to discuss a safety and response strategy for preventing the propagation of an explosion accident, namely a chemical backdraft.     

Research on the influence of foaming gas in compressed air/nitrogen foam on extinguishing the n-heptane tank fire

Tank fires threaten the lives of people and pollute the environment for their intense radiant heat, rapid fire spread and explosion hazard. Compressed air/nitrogen foam (CAF/CNF), a cleaner fire extinguishing technique used for the tank fire suppression because halogen-based agents were prohibited for environmental reasons. In this work, the influence of foaming gas in CAF/CNF on extinguishing the n-heptane tank fire was firstly investigated. Firstly, it was found that CNF spreads faster with rapid increase in foam thickness, mainly due to its better stability and less evaporation. Secondly, after foam was discharged, there existed a short increase of the combustion intensity, associated with three monotonous regions and two time delays in the whole extinguishing time. The two time delays were caused by Rayleigh–Taylor instability and flame sheet shift, respectively, and the shift distance was larger for CNF. Finally, the influential factors contributing to flame extinction were exhibited to be mainly related to the decrease in liquid burning rate and gas-phase Damkohler number. Among these factors, foam spreading rate and thickness dominated due to coupled chemical and physical extinguishing effects. Resulted from some competitive effects, CNF was slightly more efficient at extinguishing tank fires than CAF.     

高压储氢系统泄漏爆炸事故的动力学演化

为研究燃料氢气泄漏、爆炸的特性和规律,预防高压储氢系统中氢气泄漏爆炸事故发生,以加氢站为背景,数值仿真45 MPa高压储罐氢气泄漏并引发爆炸事故,分析泄漏爆炸动力学性质以及爆炸波在非均匀氢气浓度中的传播机制。同时,基于泄漏爆炸事故演化的力学机理,开展氢气泄漏爆炸动态风险分析,针对氢气不同泄漏量,建立泄漏扩散形成的气云体积、气云爆炸产生的冲击波与空间x,z方向上危害距离之间关系。研究结果表明：氢气泄漏过程中,气云氢气浓度变化与流场雷诺数具有较好一致性;氢气扩散受到高压储氢罐周围装置影响,流场中氢气浓度分布不均匀;当发生燃烧爆炸事故时,冲击波参数和湍动能变化梯度大;得到复杂布局区域冲击波超压峰值与比例距离之间关系式,其相比于理论方法更精细、计算结果更准确。研究结果可为降低高压储氢系统泄漏爆炸事故后果、采取有效防护措施提供一定依据。