Research on the transmission mechanism of low-carbon policies: an empirical study of agricultural companies

Companies bear primary responsibility for low-carbon economy, thus relevant low-carbon policies should be set properly to guide them and to ensure their low-carbon production effectively. To solve the problems generated during low-carbon development, this article verifies the existence of the transmission path and strength. This verification includes mediating variables of companies’ willingness and capacity to conduct low-carbon production, a transmission mechanism through incentive path and resources protection, and questionnaire data of agricultural companies. Conclusions show that the low-carbon policies have obvious positive effects on willingness of corporation; the basic service-oriented policy has a significantly promoting effect on low-carbon production capacity; and low-carbon production performance is positively influenced by willingness as well as capability. Aiming at a better transmission path, some corresponding recommendations have been put forward in the end.     

New frontiers for sustainability: emergy evaluation of an eco-village

The emergy analysis was used to evaluate the sustainability of a village which aims to be ecologically friendly. The choice of focusing on the use of local resources including agriculture and farm goods, photovoltaic panels, renewable heating and cooling systems, recycled water from constructed wetlands etc., aims to obtain a sustainable village. Indices and ratios based on emergy flows have been calculated and used to evaluate the behaviour of the whole system. Their dependence upon the fraction of renewable and non renewable inputs as well as locally available versus purchased inputs from outside is stressed. A new index of sustainability (SI) is also applied to the case study. Readers should send their comments on this paper to BhaskarNath@aol.com within 3 months of publication of this issue.     

A critical evaluation of the cost-effectiveness of radon protection methods in new homes in a radon Affected Area of England

In the UK, building new homes in areas prone to radon gas is currently subject to regulations that require installation of radon-proof membranes. These membranes are not, however, the only way to protect residents of new homes against radon's potential to cause lung cancer. Alternative regulatory regimes can be constructed that would achieve the same end.The purpose of this paper is to examine the cost-effectiveness of four alternative regimes and so determine if building regulations for new homes could be altered to protect residents from the effects of radon more cost-effectively than at present. In addressing this question, the paper also contributes to the wider debate on how best to reduce the effect on public health of exposure to radon.The measure of cost-effectiveness used, cost per quality-adjusted life-year gained, is determined from radon test results obtained in properties in Brixworth, England, UK, a radon Affected Area. Confidence intervals for the cost-effectiveness estimates are also derived using bootstrap techniques.The central estimates of cost-effectiveness range from £2870 per quality-adjusted life-year gained for the most cost-effective of the alternative regimes to £6182 for the current regime. These results suggest that alternative regimes may be more cost-effective in tackling the radon problem. A definitive assessment of the most suitable to adopt will require extensive negotiation between government departments, the construction industry, and other interested parties to ensure acceptance of any new regime. The paper offers suggestions for future research that should help in the process of identifying the key features of a new regulatory approach.     

Performance evaluation of solar photovoltaic electricity-generating systems: an Indian perspective

The present work seeks to assess the sustainability of different solar photovoltaic (SPV) electricity-generating systems based upon energy, environment and economics. The sustainability indicators evaluated for energy, environment and economics are electrical output, life-cycle greenhouse gas (GHG) emissions and life-cycle cost of electricity generated per kilowatt hour. The selected SPV-based electricity generation technologies for sustainability evaluation are amorphous, monocrystalline and polycrystalline at different locations and tilt angles across India. For SPV systems, most of the emissions are the result of electricity use during manufacturing. In these cases, an average grid mix for the region of manufacture is typically used to calculate energy use and emissions. Based upon these three indicators, a figure of merit (FM) has been proposed. The results proposed that polycrystalline gives the maximum electrical output, minimum GHG emission, minimum cost and maximum FM at a radiation level of 6 kWh/m²/day with latitude and tilt angle of 34° and 35°, respectively. This work will be helpful to users of solar energy, academicians, researchers and other concerned persons, in understanding the importance, severity and benefits obtained by the application and implementation of the SPV electricity-generating systems.     

Sustainability of rice production systems: an empirical evaluation to improve policy

An evaluation is needed to monitor the progress of sustainable development (SD) in rice production systems. The purpose of this study is to provide policy inputs, examine the sustainability of rice production, and determine major policy areas. A requisite set of 12 indicators of three dimensions of SD, namely economic, was generated by employing an assemblage of top–down and bottom–up approaches. The data were gathered from farm households’ survey as well as in-depth discussion with stakeholders from the regions that represent irrigated, rain-fed lowland, rain-fed upland, flood-prone, and saline-prone rice-growing ecosystems in Bangladesh. By constructing composite indicators, the results revealed that 44 % of rice growers were economically viable, environmentally sound, and socially developed. The irrigated rice production system was found to be the most sustainable. The path analysis measured the contribution of the indicators to the index, and results highlighted that rice growers’ knowledge, skills, and social networks development, improving land productivity, and integrated nutrient management were essential for promoting sustainable rice production. However, the study findings suggest that pluralistic (i.e., government and non-government) agricultural advisory services can serve as an engine of transition to rice production sustainability in which a multi-year planning and strategy formulation are crucial besides investing in the modernization of extension services. Overall and ecosystem-specific policy implications that emerged from the findings of this study are outlined.     

Heterogeneous impact of agricultural support policies: evidence from Turkey

Agricultural support policies, which increase production to excessive levels, have been heavily criticized for their distortional effects on farmers’ decisions. High input consumption, which harms the environment, and the distribution of supports, which causes income inequality among farmers, are also the other factors that economists criticize these support policies. However, in recent years, the use and dependence on production and land have been increasing globally due to fears of food insecurity in several countries. In this article, the impact of a support policy on cotton farmers’ land in Turkey is evaluated using a detailed farm-level micro dataset. We use the dynamic panel model to consider the production dynamics, unobservable individual heterogeneity, and the endogeneity of the support variable. Our results show that considering the support variable as endogenous significantly increased its impact on farmers’ land. A farmer’s past land allocation decisions also affected their current lands holdings. However, the results varied considerably between regions and between different land sizes. Therefore, the findings show the importance of heterogeneity in the impact of support policies. We conclude that due to the heterogeneous impact of support policies, it might not be possible to discuss the effect of support policies using an average estimate applicable for all farmers. Therefore, a different support policy considering regional characteristics or farm size is necessary to obtain the desired policy outcomes.

     

The cost-effectiveness of residential radon remediation programmes: assumptions about benefits stream profiles over time

A recent cost-effectiveness analysis of a residential radon remediation programme considered and highlighted many areas of uncertainty in the parameters chosen for the analysis. One assumption not challenged in the study was the benefits stream profile adopted. There are several different ways of loading the benefits in terms of life years into the cost-effectiveness model and several of these are explored and the results are reported in this study. The benefits profile depends upon the lead-time to cancer manifestation post environmental carcinogen (radon) exposure. The literature reviewed suggests that there are many options for loading benefits to radon-induced lung cancer prevention programmes. In this study, the alternative benefits stream profiles are explored and their implications for the cost-effectiveness ratio are examined. Adopting different benefits stream profiles to the model results in a range of cost-effectiveness ratios from 14912.90 pounds per life year gained to 52416.27 pounds per life year gained. The preferred model is reported where the life years gained are assumed to be equally distributed over the last 15 years of the 40-year time horizon of the analysis (Y25-40) and the corresponding cost-effectiveness ratio is 37,943 pounds per life year gained.     

Predicting fly ash resistivity—an evaluation

Recently a technique for predicting fly ash resistivity from an as-received, ultimate coal analysis and the chemical composition of the coal ash produced by simple laboratory ignition was published. This paper evaluates this technique by comparing predicted resistivity data with laboratory measured values, in situ resistivity data, and precipitator performance information acquired from 12 field test programs. Considering the precision of measurement generally encountered in precipitator technology and the limited amount of certain laboratory data available, the results are encouraging and the evaluation is favorable.     

Reconciling agriculture and biodiversity in European public policies: a bio-economic perspective

Regional Environmental Change - Agriculture has been identified as a major driver of the current significant changes in farmland biodiversity. Taking into account these environmental impacts,...     

The role of traditional knowledge policies in Egypt: the case of Wadi Allaqi

Environment, Development and Sustainability - Globally, traditional knowledge is at stake, notwithstanding intentions recorded in international policy conventions. Egypt has accepted and ratified...     

Efficient management of eutrophic coastal zones in theory and practice: an application on nitrogen reduction to the Stockholm archipelago

This study estimates efficient nitrogen load reductions to the Stockholm archipelago, a Swedish coastal zone in the Baltic Sea, and compares these with politically determined and implemented nitrogen abatement programs. The region is relatively well equipped with necessary data, and a simple programming model is constructed. The results show a large divergence in efficient nitrogen reductions, mainly due to the divergences in benefit estimates from water quality improvements in the archipelago. However, the results need to be interpreted with caution due to all uncertainties related to predicting net values from changes in nitrogen load to a coastal zone. In spite of this, it is still of policy relevance to infer results which show that the politically determined target coincides with an efficient nitrogen reduction at relatively low benefit estimate, but that actual net benefits could be increased from a reallocation of abatement measures towards more low cost measures.     

Community vulnerability and resilience in disaster risk reduction: an example from Phojal Nalla,Himachal Pradesh,India

International Disaster Risk Reduction Frameworks and Indian Plans advocate shared responsibility for reducing disaster risk, in which community vulnerability and resilience conditions are central. This paper presents a case study from the Indian Himalaya (Kullu District) of community vulnerability and resilience conditions following damaging floods, primarily the 1994 Phojal Nalla flood, through the concepts of community heritage and capital. Data were collected in the period 2013–2016, using semi-structured interviews (n?=?129), village reconnaissance and archival/contemporary data searches. The connections between heritage, capital, vulnerability and resilience are complex, but results demonstrate ‘knowledge’ is the principal driver of resilience conditions, via facets of heritage (e.g. religious infrastructure and activities, traditional architectural vernacular, and multi-generational attachments to place) and capital (e.g. income diversification, access to communication technologies, societal welfare measures and positive interactions with water). Persisting vulnerabilities stem from differential access to and implementation of best practice knowledge, governed by social, economic and political conditions. Further improvements in risk reduction require greater consideration of the following: (1) the integration of community local knowledge into the overall disaster management process; (2) the opportunities offered by mobile phone and other technologies for generating and sharing knowledge across society; and (3) the value of under-utilised knowledge of past disaster events, assembled from a systematic evaluation of oral, documentary and landscape evidence, to risk reduction.     

中国城市矿产政策演化研究

城市矿产是工业化和城市化过程的产物,它是蕴藏于城市中有较高经济价值并可回收利用的二次资源,具有载能性、循环性、战略性。随着工业化、城镇化和消费持续升级,"垃圾围城"已然成为中国许多大中城市亟需解决的环境问题,严重阻碍中国的可持续发展。城市矿产变废为宝,能有效化解资源与环境双重约束。为此,中国政府先后出台一系列城市矿产产业政策以推动其快速发展。本文收集1987—2015年国家层面颁布的相关政策文件,在运用内容分析法对政策文本梳理、编码并统计计量的基础上,首先从颁布部门、数量、力度等方面对政策体系进行总体分析,然后构建并运用政策工具-政策作用环节两维度分析框架,探讨中国城市矿产政策体系的演化过程及发展特征。研究发现:(1)从政策发展历程分析,中国城市矿产政策体系经历了依附环境保护政策的孕育期、体系初建的形成期和效力深化的发展期。(2)从政策颁布维度分析,中国城市矿产政策颁布速度逐渐加快,力度逐渐增强,参与机构数量不断增多。(3)从政策工具维度分析,中国城市矿产政策体系以环境型政策为主,逐渐呈现出强化供给型政策的演化趋势。(4)从政策作用环节分析,中国城市矿产政策体系由重点关注回收、深加工环节向关注全产业链环节演变。最后,针对中国城市矿产政策体系演变特征与存在的不足,本文从以下三个方面提出了促进中国城市矿产产业发展的政策建议:一是加强部际联系,完善顶层设计;二是加强消费引导,完善需求型政策;三是立足产品全生命周期,健全产业政策体系。     

基于LCA的废旧资源循环利用节能减排效果评估模式与方法研究——以吉林省某钢铁企业为例

促进废旧资源循环利用是加快推进我国生态文明建设,完成节能减排目标的必然选择。本文基于生命周期评价模式,从微观企业层面入手,构建产品全生命周期基准流程,引入能量输入与环境输出参数,建立废旧资源循环利用节能减排效果量化核算模型,评估再生产品的节能减排经济成效,并以吉林省某钢铁企业为例,评估"废钢-电炉"短流程和"铁矿石-高炉-转炉"长流程的能源、环境、成本差异,辨识影响废钢再循环节能减排效果的主要因素和重要环节。结果显示,再生钢铁全生命周期与原生钢铁全生命周期相比,节能588.48kgce/t,节能率为84%;主要污染物中SO2减排率最高,达92%;CO2总减排1 180.92 kg/t,减排率为67%;总成本却高出198元/t。其中,炼铁工序的节能量和减碳量最大,烧结工序SO2、NOx和烟(粉)尘减排量最大,焦化工序COD和氨氮减排量最大,回收、加工处理、炼钢环节节能量和减碳量以及SO2、NOx和烟(粉)尘减排量均为负。成本方面,再生钢铁生产成本高于原生钢铁308元/t,虽然再生钢铁由于污染减排可节省56元/t的排污费并获取54元/t的碳交易收益,但都不足以扭转电炉炼钢费用较高的现状。因此,国家应在电炉炼钢方面给予钢企及相关企业适当的财税扶持政策,在电价方面给予钢企一定的优惠或补贴,并完善废钢回收加工体系等,以促进废钢循环利用。基于LCA的废旧资源循环利用节能减排效果评估可以实现对产品生命周期全过程的资源、环境、成本的优化管理。     

Sustainable architecture evaluation method in an African context: transgressing discipline boundaries with a systems approach

This paper presents a method for poverty-inclusive evaluation of architectural sustainability. Existing evaluation tools largely ignore poverty—an omission that renders them inadequate for use in a developing country context. Methodological challenges arise from the complexity due to inclusion of poverty alongside numerous other sustainability aspects. Moreover, the shared transdisciplinary nature of architecture and sustainability coupled with inherent scale polarities add to the complexity. The evaluation method discussed here adopts concepts from systems theory to develop a framework that addresses the above challenges. It yields credible results in a developing country context with a dearth of research precedents and databases. The method was applied in an empirically based study of the sustainability performance of earth walling techniques in Uganda. The study showed that, from a sustainability viewpoint, wattle-and-daub performs best, followed by adobe, whereas the most popular brick was only better than compressed earth blocks. In their transparency, the evaluation method and results here presented can stand conventional academic scrutiny. But the conclusions point to the need for greater acceptance of transdisciplinary approaches to knowledge conceptualism if the holistic disposition of sustainability, architecture and sustainable architecture is to be accommodated.     

Anion mobility in soils: Relevance to nutrient transport from forest ecosystems

Nutrient transport from forest ecosystems is strongly regulated by the availability of anions in soil solution. Each of the major anions in forest soil solutions has some unique properties which affect its production and mobility. The production of bicarbonate, one of the most common anions, is regulated by soil CO₂ pressure and pH. The mobility of phosphate is most strongly affected by adsorption reactions. The mobility of nitrate is regulated almost solely by biological processes, whereas chloride is relatively uninvolved in either biological or inorganic chemical reactions. Sulfate is intermediate, being involved in both biological and inorganic chemical reactions.Knowing these properties of the major anions, it is possible to assess and to predict the effects of several diverse site manipulations on soil leaching rates. Case studies from a site in Washington State consistently demonstrate the importance of accounting for bicarbonate transformations following site manipulations.Although organic anions are frequently dominant in cold-region soil solutions, very little information on the complex factors affecting their mobilities is available. Further research into organic anion mobility and futher attention to bicarbonate mobility should add greatly to the body of knowledge on nutrient transport processes in forest soils.     

INSIGHT: a framework for determining impacts of changes in land and water policies.

CSIRO Sustainable Ecosystems is constructing a spatially explicit modelling system capable of exploring alternative land and water policy alternatives against plausible price, cost, and climate scenarios for the next 20 years. INSIGHT will be used to identify the likely impacts of land and water policy options on regional economies and structural adjustment. Flowcharts have been constructed for most of the major crop and pasture and associated economic models for commodities produced in the Lachlan River Catchment of New South Wales. This enabled the most important components and interrelationships within these models to be readily identified. The next step has been to construct models at the regional scale that contain the essential elements of the more-detailed point models. The paper describes the progress to date in describing these models, and how they have been integrated into a coordinated agricultural crop production evaluation system.     

Assessing the role of consumers in sustainable product policies

A global analysis shows that considerable forces contribute nowadays to the perpetuation of the so-called “developed” model of consumption, and its extension to growing parts of the world, despite reiterated calls for “modification of production and consumption patterns”. Environmental product regulation can be situated in this general perspective. This paper returns to the framing of policies devoted to ecologically sustainable consumption, taking the example of the Integrated product policy at the European level. How are the objectives of such policies defined? What instruments are privileged? Comparing theoretical approaches with policy design, we focus on the role devoted to consumers in these contexts. Bringing in literature evidence, survey results and findings from an original study, we argue that appropriate knowledge of the diversity of consumers’ attitudes and about the limitations of their possible actions is not properly taken into account in product policies, notably when information and voluntary tools are dominant. From this point of view, environmental product regulations are well justified, but they should, as all policy instruments implicating consumers, take careful notice of their situation.