Have government regulations improved workplace safety? : A test of the asynchronous regulatory effects in China's coal industry, 1995-2006

Problem

Empirical studies on the effectiveness of workplace safety regulations are inconclusive. This study hypothesizes that the asynchronous effects of safety regulations occur because regulations need time to become effective. Safety regulations will work initially by reducing the most serious accidents, and later by improving overall safety performance.

Method

The hypothesis is tested by studying a provincial level aggregate panel dataset for China's coal industry using two different models with different sets of dependent variables: a fixed-effects model on mortality rate, which is defined as fatalities per 1,000 employees; and a negative binominal model on the annual number (frequency) of disastrous accidents.

Results

Safety regulations can reduce the frequency of disastrous accidents, but have not reduced mortality rate, which represents overall safety performance.

Discussion and summary

Policy recommendations are made, including shifting production from small to large mines through industrial consolidation, improving the safety performance of large mines, addressing consequences of decentralization, and facilitating the implementation of regulations through carrying on institutional actions and supporting legislation.

Impact on industry

Until recently, about 4,000 coal miners perished annually in China, demonstrating that workplace safety in China's coal industry is an urgent and important issue. This research provides evidence that safety regulations have asynchronous effects and identifies the priorities in improving safety in China's current coal mining. This may assist the Chinese government to design more effective safety improvement policies and improve the effectiveness of safety regulations and safety performance.     

Making work safer: Testing a model of social exchange and safety management

Introduction

This study tests a conceptual model that focuses on social exchange in the context of safety management. The model hypothesizes that supportive safety policies and programs should impact both safety climate and organizational commitment. Further, perceived organizational support is predicted to partially mediate both of these relationships.

Methods

Study outcomes included traditional outcomes for both organizational commitment (e.g., withdrawal behaviors) as well as safety climate (e.g., self-reported work accidents). Questionnaire responses were obtained from 1,723 employees of a large national retailer.

Results

Using structural equation modeling (SEM) techniques, all of the model's hypothesized relationships were statistically significant and in the expected directions. The results are discussed in terms of social exchange in organizations and research on safety climate.

Impact on Industry

Maximizing safety is a social-technical enterprise. Expectations related to social exchange and reciprocity figure prominently in creating a positive climate for safety within the organization.     

Winter storm-related injuries in Oklahoma, January 2007

Introduction

A January 2007 ice storm occurred in Oklahoma, causing power outages and hazardous travel conditions. The objective of this investigation was to describe the nature of winter storm-related injuries among Oklahoma residents, to determine populations at risk, and to inform prevention-planning personnel.

Methods

Winter storm-related injuries were a temporarily reportable condition; all acute-care hospitals and the state medical examiner logged storm-related injuries and deaths during January 12 − 30, 2007. Medical records were retrospectively abstracted.Risk of injury was described by demographic group, injury type, and mechanism.

Results

Among 6,047 persons experiencing winter storm-related injuries, 74% were injured in falls, 13% in motor-vehicle collisions (MVCs), 8% while sledding, 1% by unintentional carbon monoxide poisoning, 1% in cleanup activities, and 3% by other mechanisms. Median age of injured persons was 39 years. Persons aged ≥ 40 years were 1.4 times more likely to experience falls as the cause of injury than those aged < 40 years, and falls were twice as likely as other mechanisms to cause fractures among persons aged ≥ 40 years. Injured persons aged < 40 years were 2.2 times more likely to experience MVC-related injuries, and 19 times more likely to experience sledding-related injuries than persons aged ≥ 40 years.

Conclusions

Younger persons were more likely injured in MVCs and sledding incidents, whereas older persons were more likely to experience falls and fractures.

Impact on industry

Prevention messages for winter storm-related injuries should target winter-driving safety tips to younger adults and precautions regarding falls to older adults.     

An analysis of injury claims from low-seam coal mines

Introduction

The restricted workspace present in low-seam coal mines forces workers to adopt awkward working postures (kneeling and stooping), which place high physical demands on the knee and lower back.

Method

This article provides an analysis of injury claims for eight mining companies operating low-seam coal mines during calendar years 1996-2008. All cost data were normalized using data on the cost of medical care (MPI) as provided by the U.S. Bureau of Labor Statistics.

Results

Results of the analysis indicate that the knee was the body part that led in terms of claim cost ($4.2 million), followed by injuries to the lower back ($2.7 million). While the average cost per injury for these body parts was $13,100 and $14,400, respectively (close to the average cost of an injury overall), the high frequency of these injuries resulted in their pre-eminence in terms of cost. Analysis of data from individual mining companies suggest that knee and lower back injuries were a consistent problem across companies, as these injuries were each among the top five most costly part of body for seven out of eight companies studied.

Application/Impact

Results of this investigation suggest that efforts to reduce the frequency of knee and low back injuries in low-seam mines have the potential to create substantial cost savings.     

Global trend according to estimated number of occupational accidents and fatal work-related diseases at region and country level

Background

Although occupational accidents and work-related diseases have been of interest for a long time, due to lack of proper recording and notification systems the official numbers of occupational accidents and work-related diseases are missing for many countries. Presently, the demand for effectiveness and an interest in the economic aspects of accidents have increased prevention activities at company and country levels.

Methods

Occupational accident data of selected countries and of World Health Organization regional divisions together with the global burden of disease were used in estimating global occupational accidents and fatal work-related diseases. The trend of global occupational accidents and work-related diseases is presented at region and country levels. The years 1998, 2001, and 2003 are compared in the case of occupational accidents and the years 2000 and 2002 in the case of work-related diseases.

Results

The total number of occupational accidents and fatal work-related diseases has increased, but the fatality rates per 100,000 workers have decreased. There were almost 360,000 fatal occupational accidents in 2003 and almost 2 million fatal work-related diseases in 2002. Every day more than 960,000 workers get hurt because of accidents. Each day 5,330 people die because of work-related diseases.

Conclusions

Information on occupational accidents and work-related diseases is needed so that countries may understand better the importance of occupational health and safety at country and company level. Especially companies in developing countries are not familiar with occupational safety and health. Statistical data is essential for accident prevention; it is a starting point for the safety work.     

Injury severity analysis of accidents involving young male drivers in Great Britain

Introduction

Young male drivers are over-represented in traffic accidents; they were involved in 14% of fatal accidents from 1991 to 2003 while holding only 8% of all drivers licenses in the UK. In this study, a subset of the UK national road accident data from 1991 to 2003 has been analyzed. The primary aim is to determine how to best use monetary and progressive resources to understand how road safety measures will reduce the severity of accidents involving young male drivers in both London and Great Britain.

Method

Ordered probit models were used to identify specific accident characteristics that increase the likelihood of one of three categorical outcomes of accident severity: slight, serious, or fatal.

Results

Characteristics found to lead to a higher likelihood of serious and fatal injuries are generally similar across Great Britain and London but are different from those predicted to lead to a higher likelihood of slight injuries. Those characteristics predicted to lead to serious and fatal injuries include driving in darkness, between Friday and Sunday, on roads with a speed limit of 60 mph, on single carriageways, overtaking, skidding, hitting an object off the carriageway, and when passing the site of a previous accident. Characteristics predicted to lead to slight injuries include driving in daylight, between Monday and Thursday, on roads with a speed limit of 30 mph or less, at a roundabout, waiting to move, and when an animal is on the carriageway.

Impact on Industry

These results aid the selection of policy options that are most likely to reduce the severity of accidents involving young male drivers.     

Differences in urban and rural accident characteristics and medical service utilization for traffic fatalities in less-motorized societies

Introduction

Fatalities from traffic accidents in less-motorized societies are an important global issue. We aimed to characterize the geographic differences of fatalities in such societies to facilitate the development of targeted interventions.

Method

This study linked police reports, hospital data, and vital registration data from Taiwan with special reference to accident factors in pre-hospital deaths and medical care in hospital deaths.

Results

A higher percentage of pre-hospital deaths were observed following rural as compared to urban traffic accidents. The deaths due to rural accidents can be attributed to lower use of restraints (i.e., helmets or seat belts), lower percentage of motorcyclists, and more highway accidents. A higher percentage of victims in rural accidents were transported to distant medical centers rather than to local hospitals.

Conclusion

Specific interventions, such as intelligent emergency medical systems, campaigns for helmets and seat belt usage, enforcement of helmets and seat belt use, and speed control measures should be targeted to rural areas.

Impact on industry

Cooperation between the vehicle industry and emergency medical providers in rural traffic accident rescue teams may decrease the numbers of deaths in these regions.     

Acciphilia on the road: An analysis of severe collisions

Introduction

Although prior studies of road traffic accidents have found between-group differences in risk, little attention has been given to the encounter between drivers involved in severe collisions.

Method

The present study empirically evaluates two different possible causes of "social accidents," which are defined as collisions between two or more drivers where some faulty social interaction might be assumed, and which are the most prevalent cause of road injuries. The analyses use merged Israeli collision records from 1983 to 2004 with data from two national censuses, thus providing an unprecedented empirical basis to study the social foundations of car accidents. The data are used to adjudicate between two alternative hypotheses: the heterogeneity hypothesis (socially different drivers tend to collide) versus the homogeneity hypothesis (socially similar drivers tend to collide).

Results

Multivariate analyses provide preliminary support for the latter hypothesis. Given an accident, there are more collisions among drivers from the same broad educational group, and the factors that influence this correlation are independent of geography. The paper thus leads to the idea that severe collisions reflect a sociological or ecological process that is akin to acciphilia.

Impact on Industry

The preliminary findings suggest that variation between drivers may be preferable to similarity, since apparently there is a greater tendency toward collisions between similar drivers.     

The role of production and teamwork practices in construction safety: A cognitive model and an empirical case study

Problem

In construction, the challenge for researchers and practitioners is to develop work systems (production processes and teams) that can achieve high productivity and high safety at the same time. However, construction accident causation models ignore the role of work practices and teamwork. This study investigates the mechanisms by which production and teamwork practices affect the likelihood of accidents.

Method

The paper synthesizes a new model for construction safety based on the cognitive perspective (Fuller's Task-Demand-Capability Interface model, 2005) and then presents an exploratory case study. The case study investigates and compares the work practices of two residential framing crews: a 'High Reliability Crew' (HRC)—that is, a crew with exceptional productivity and safety over several years, and an average performing crew from the same company.

Results

The model explains how the production and teamwork practices generate the work situations that workers face (the task demands) and affect the workers ability to cope (capabilities). The case study indicates that the work practices of the HRC directly influence the task demands and match them with the applied capabilities. These practices were guided by the 'principle' of avoiding errors and rework and included work planning and preparation, work distribution, managing the production pressures, and quality and behavior monitoring.

Summary

The Task Demand-Capability model links construction research to a cognitive model of accident causation and provides a new way to conceptualize safety as an emergent property of the production practices and teamwork processes. The empirical evidence indicates that the crews' work practices and team processes strongly affect the task demands, the applied capabilities, and the match between demands and capabilities.

Impact on Industry

The proposed model and the exploratory case study will guide further discovery of work practices and teamwork processes that can increase both productivity and safety in construction operations. Such understanding will enable training of construction foremen and crews in these practices to systematically develop high reliability crews.     

A method for simplifying the analysis of traffic accidents injury severity on two-lane highways using Bayesian networks

Introduction

This study describes a method for reducing the number of variables frequently considered in modeling the severity of traffic accidents. The method's efficiency is assessed by constructing Bayesian networks (BN).

Method

It is based on a two stage selection process. Several variable selection algorithms, commonly used in data mining, are applied in order to select subsets of variables. BNs are built using the selected subsets and their performance is compared with the original BN (with all the variables) using five indicators. The BNs that improve the indicators’ values are further analyzed for identifying the most significant variables (accident type, age, atmospheric factors, gender, lighting, number of injured, and occupant involved). A new BN is built using these variables, where the results of the indicators indicate, in most of the cases, a statistically significant improvement with respect to the original BN.

Conclusions

It is possible to reduce the number of variables used to model traffic accidents injury severity through BNs without reducing the performance of the model.

Impact on Industry

The study provides the safety analysts a methodology that could be used to minimize the number of variables used in order to determine efficiently the injury severity of traffic accidents without reducing the performance of the model.     

Overhead drilling: Comparing three bases for aligning a drilling jig to vertical

Problem

Drilling overhead into concrete or metal ceilings is a strenuous task done by construction workers to hang ductwork, piping, and electrical equipment. The task is associated with upper body pain and musculoskeletal disorders. Previously, we described a field usability evaluation of a foot lever and inverted drill press intervention devices that were compared to the usual method for overhead drilling. Both interventions were rated as inferior to the usual method based on poor setup time and mobility.

Method

Three new interventions, which differed on the design used for aligning the drilling column to vertical, were compared to the usual method for overhead drilling by commercial construction workers (n = 16).

Results

The usual method was associated with the highest levels of regional body fatigue and the poorest usability ratings when compared to the three interventions.

Conclusion

Overall, the 'Collar Base' intervention design received the best usability ratings.

Impact on Industry

Intervention designs developed for overhead drilling may reduce shoulder fatigue and prevent subsequent musculoskeletal disorders. These designs may also be useful for other overhead work such as lifting and supporting materials (e.g., piping, ducts) that are installed near the ceiling. Workplace health and safety interventions may require multiple rounds of field-testing prior to achieving acceptable usability ratings by the end users.     

The business cycle and the incidence of workplace injuries: evidence from the U.S.A

Introduction

The current study explored the association between the business cycle and the incidence of workplace injuries to identify cyclically sensitive industries and the relative contribution of physical capital and labor utilization within industries.

Method

Bureau of Labor Statistics nonfatal injury rates from 1976 through 2007 were examined across five industry sectors with respect to several macroeconomic indicators. Within industries, injury associations with utilization of labor and physical capital over time were tested using time series regression methods.

Results

Pro-cyclical associations between business cycle indicators and injury incidence were observed in mining, construction, and manufacturing but not in agriculture or trade. Physical capital utilization was the highest potential contributor to injuries in mining while labor utilization was the highest potential contributor in construction. In manufacturing each effect had a similar association with injuries.

Conclusion

The incidence of workplace injury is associated with the business cycle. However, the degree of association and the mechanisms through with the business cycle affects the incidence of workplace injuries was not the same across industries.

Impact on Industry

The results suggest that firms in the construction, manufacturing, and mining industries should take additional precautionary safety measures during cyclical upturns. Potential differences among industries in the mechanisms through which the business cycle affects injury incidence suggest different protective strategies for those industries. For example, in construction, additional efforts might be undertaken to ensure workers are adequately trained and not excessively fatigued, while safety procedures continue to be followed even during boom times.     

Perceptions of personal vulnerability to workplace hazards in the Australian construction industry

Introduction

The importance of risk perception for workplace safety has been highlighted by the inclusion of risk appraisals in contemporary models of precautionary behavior at work. Optimism bias is the tendency to think that negative events are less likely to happen to oneself than to the average person, and is proposed to be related to the reduced use of precautions.

Method

Building on studies of optimism bias for workplace hazards using samples with heterogenous risk profiles, the current study aimed to investigate whether optimism bias is present in a sample of workers exposed to similar workplace hazards. 175 Australian construction workers completed a brief survey that asked them to rate the likelihood of common construction industry hazards occurring to them and to the average worker of the same age doing the same job. Significant levels of optimism bias were found for many hazards (including being electrocuted, being trapped in a confined space, falling from heights, and causing someone else to have an injury).

Results

Optimism bias was not related to perceived controllability, contrary to findings in other domains, yet consistent with findings of optimism bias for workplace hazards. Optimism bias was not found to be related to a reduction in safe work behaviors, though this may be due to difficulties in measuring safe or precautionary behavior, such as social desirability.

Impact on industry

That most workers think that hazards are less likely to happen to them than to the average worker presents a significant problem because it may ameliorate the efficacy of safety programs, yet constitutes a largely unexplored opportunity for improving workplace safety performance.     

Comparison of risk factors for falls from height between commercial and residential roofers

Introduction

The purpose of this investigation was to compare commercial roofers and residential roofers in terms of their behaviors, beliefs, working conditions, and attitudes toward the use of fall protection devices, which could lead to fall accidents.

Methods

A cross-sectional sample of 252 roofers participated in the survey in the Midwest (Wisconsin, Illinois, Michigan, Indiana, and Iowa).

Results

Residential roofers were more likely to fall (adjusted prevalence ratio = 1.57, 95% CI = 0.86, 2.27) than commercial roofers. Existence of fall protection programs, enforcement of fall protection device use, actual use of fall protection devices, work type, company size, and race/ethnicity were significantly associated with fall accidents.

Impact on industry

This study adds insight into fall accidents from roofs in the construction industry and provides industry-specific cautions against fall accidents that can be reflected in regulatory agency implementation.     

The accident-exposure association: self-reported versus recorded collisions

Problem

It has been claimed that exposure to risk of road traffic accidents (usually conceptualized as mileage) is curvilinearly associated with crashes (i.e., the increase in number of crashes decreases with increased mileage). However, this effect has been criticized as mainly an artifact of self-reported data.

Method

To test the proposition that self-reported accidents create part of the curvilinearity in data by under-reporting by high-accident drivers, self-reported and recorded collisions were plotted against hours of driving for bus drivers.

Results

It was found that the recorded data differed from self-reported information at the high end of exposure, and had a more linear association with the exposure measure as compared to the self-reported data, thus supporting the hypothesis.

Discussion

Part of the previously reported curvilinearity between accidents and exposure is apparently due to biased methods. Also, the interpretation of curvilinearity as an effect of exposure upon accidents was criticized as unfounded, as the causality may just as well go the other way. Impact on industry: The question of how exposure associates with crash involvement is far from resolved, and everyone who uses an exposure metric (mileage, time, induced) should be careful to investigate the exact properties of their variable before using it.     

Age and gender differences in conviction and crash occurrence subsequent to being directed to Iowa's driver improvement program

Introduction

This paper investigates potential gender and age differences in conviction and crash occurrence subsequent to being directed to attend Iowa's Driver Improvement Program (DIP).

Methods

Binary logit models were developed to investigate the factors that influence conviction occurrence after DIP by gender and age. Because of the low crash occurrence subsequent to DIP, association rules were applied to investigate the factors that influence crash occurrence subsequent to DIP, in lieu of econometric models.

Results

There were statistical significant differences by driver gender, age, and conviction history in the likelihood of subsequent convictions. However, this paper found no association between DIP outcome, crash history, and crash occurrence.

Impact on industry

Evaluating the differences in conviction and crash occurrence subsequent to DIP between female and male drivers, and among different age groups can lead to improvements of the effectiveness of DIPs and help to identify low-cost intervention measures, customized based on drivers’ gender and age, for improving driving behaviors.     

“Safety is everyone's job:” The key to safety on a large university construction site

Problem

Construction risk management is challenging.

Method

We combined data on injuries, costs, and hours worked, obtained through a Rolling Owner-Controlled Insurance Program (ROCIP), with data from focus groups, interviews, and field observations, to prospectively study injuries and hazard control on a large university construction project.

Results

Lost-time injury rates (1.0/200,000 hours worked) were considerably lower than reported for the industry, and there were no serious falls from height. Safety was considered in the awarding of contracts and project timeline development; hazard management was iterative. A top-down management commitment to safety was clearly communicated to, and embraced by, workers throughout the site.

Discussion and Impact

A better understanding of how contracting relationships, workers' compensation, and liability insurance arrangements influence safety could shift risk management efforts from worker behaviors to a broader focus on how these programs and relationships affect incentives and disincentives for workplace safety and health.     

Dissociation between driving performance and drivers' subjective estimates of performance and workload in dual-task conditions

Introduction

The current study measured how concurrent driving and in-vehicle activities of different levels of engagement varied in terms of performance and subjective estimates of demand and performance.

Method

In this test track study, 41 younger and older drivers completed a series of cognitive tasks while driving an instrumented vehicle. One task involved an engaging guessing game where drivers tried to guess the identity of an object. The other task involved a simple mental arithmetic task.

Results

We observed some dissociation between drivers' performance and their subjective reports. For instance, drivers tended to estimate their performance as better for the more engaging guessing task than the arithmetic task, though their performance was actually worse. At the same time, subjective estimates of workload across the two tasks did not vary in the dual-task condition even though they did in the single-task baseline conditions, suggesting that drivers failed to account for the added demands in dual-task situations.

Conclusions

We discuss the implications of these findings for driver safety.

Impact on Industry

Crashes due to distraction can carry tremendous costs for employers, in terms of injury, disability, and loss of potentially productive work years, whether these crashes occur on or off the job.