Radionuclide speciation and its relevance in environmental impact assessments

To assess the long-term environmental impact of radioactive contamination of ecosystems, information on source terms including radionuclide speciation, mobility and biological uptake is needed. A major fraction of refractory radionuclides released from nuclear sources such as nuclear weapons tests and reactor accidents is present as radioactive particles, whilst radionuclides are also present as colloids or low molecular mass species in effluents from nuclear installations. Low molecular mass species are more mobile (lower apparent K(d)) and bioavailable (higher apparent BCF) than colloids and particles. Soils and sediments act as sinks for particles and colloids. Due to particle weathering, associated radionuclides can be remobilised over time. Thus, information on particle characteristics such as composition, particle size, crystalline structures and oxidation states influencing weathering rates and subsequent mobilisation is essential. The present article summarises current knowledge on radioactive particles released from different sources, and the relevance of radionuclide speciation for mobility and biological uptake.     

Radionuclide transfer to freshwater biota species: review of Russian language studies

Around 130 publications reporting studies on radionuclide transfer to freshwater biota species conducted in the former USSR were reviewed to provide the concentration ratio values. None of these studies were available up to now in the English language reviews or publications. The values derived have been compared with the CR values used for freshwater systems in the International reviews. For some radionuclides reviewed in this paper, the data are in good agreement with the mean CR values presented earlier, however for some of them, in particular, for ²⁴¹Am (bivalve molluscs, gastropods and pelagic fish), ⁶⁰Co (gastropods, benthic fish and insect larvae), ⁹⁰Sr and ¹³⁷Cs (benthic fish and zooplankton), the mean values given here are substantially different from those presented earlier. The data reported in this paper for thirty five radionuclides and eleven groups of freshwater species markedly improve the extent of available data for evaluation of radiation impact on freshwater species.     

Production of radioactive particles for use in environmental studies

This paper presents an aerosol generation technique developed to produce dry aerosol particles of various sizes from aqueous solutions of salt. The technique was tested with sodium chloride, lithium carbonate and uranyl acetate at various aqueous concentrations which produced particles in the size range of 0.13-1.37 microm Mass Median Diameter (MMD). The generated aerosols were acceptably monodisperse with a geometric standard deviation of 1.4-2. Both MMD and Mass Median Aerodynamic Diameter (MMAD) increased significantly (p<0.001) with increased concentration of the salt in solution. The technique can also be used to generate aerosols of different chemical species. The results obtained indicate that the system is convenient for use with various aerosol-forming materials, with a stable particle size distribution being maintained for a long period of steady operation. The technique was successfully applied in wind tunnel studies to simulate the release of submicron radioactive particles and their interception by crops, grass and tree canopies. The relevance and application of the technique in other areas of environmental assessment studies is discussed.     

Partitioning of radiostrontium in marine aqueous suspensions: laboratory experiments and modeling studies

Quantitative information on the adsorption/desorption of radionuclides by suspended loads is important in the study of their environmental behavior. In this paper, controlled laboratory experiments were directed at studying the kinetic transfer and final distribution of radiostrontium in aqueous suspensions using 85Sr as tracer. The results showed that the uptake of 85Sr in seawater can be properly described by one reversible-reaction model. However, in the absence of competitive cations, it has been shown that two reactions of different characteristic times are unambiguously involved in the kinetic evolution of adsorption. Thus, a modeling approach consisting of three-box model has been applied. The model predicts in a satisfactory way the time evolution of activities in the dissolved phase and two sites in the particles. Experimental evidence showed, through comparison among kinetic and distribution coefficients corresponding to different conditions, that Ca2+ affects strongly the rate and extent of Sr uptake by suspended particles. On the other hand, distribution coefficients were found to be sensitive to changes in suspended particulate matter (SPM) concentration, exhibiting a reverse effect with this parameter on the adsorption. In addition, desorption from particles is important showing that Sr can be easily released due to cation-exchange processes.     

ICT applications in the research into environmental sustainability: a user preferences approach

Whether information and communication technology (ICT) constitutes a threat or a cure to environment??s deterioration is controversially discussed. Empirical evidence on the impacts of ICT is rare, so that generalizable lessons can hardly be drawn. This study provides empirical results on the role of ICT in research for environmental sustainability, but instead of ascertaining the impact of ICT on environmental protection, we conduct an analysis of the use of ICT in sustainability research. We assess the preferences of experts in different thematic sustainability fields for applying ICT tools, and we investigate ways to improve the application of these tools in order to augment their returns with respect to environmental protection research. This analysis is based on a set of surveys that were administered to international experts to evaluate the importance of ICT in environmental sustainability research and the research demands in key environmental sectors, such as climate change, natural resources, energy and biodiversity. The methodological framework is built on the analysis of users?? preferences for future developments in ICT tools using stated preferences techniques. Overall results suggest that ICT tools need to be developed in specific contexts, taking into account users?? needs and expectations. Our analysis shows that the use of ICT in environmental research is of great importance in the scientific community, but it can also play a crucial role in the policy context.     

Radionuclide monitoring strategy for food-chain in Hungary

Annually about 3000 samples including foodstuff, feeding material, environmental samples, among them bioindicators are examined by the Radiological Monitoring Network of the Ministry of Agriculture and Regional Development. Environmental monitoring strategy and major properties of the network are described. The median value of specific activity of (137)Cs in all kinds of foodstuff produced in Hungary is below 0.1B q/kg fresh weight, based on regular countrywide survey. The committed effective dose due to ingestion for adults was estimated to be 0.6 microSv for (90)Sr and 0.3 microSv for (137)Cs in 2004 according to a conservative estimation. It is shown how (137)Cs contamination due to the accidental release from the steel mill in Algeciras, Spain in 1998 could be detected by a county station of the network making use of the database of the whole network.     

Radiochemical analyses for environmental radiological studies at nuclear power stations

The analytical procedures used in a program of radiological monitoring studies at nuclear power stations are discussed. Samples of in-plant and effluent liquids, gases, and airborne particles were analyzed by radiochemical methods or by gamma-ray spectrometry. These procedures were modified for environmental media, including air, airborne particles, vegetation and food, milk, animal tissue, water, soil and sediment, generally by analyzing larger samples, enhancing the purification procedures, and increasing the detection sensitivity. Emphasis was placed on analyzing special samples for effluent radionuclides not routinely monitored, such as gaseous H-3, C-14, and Kr-85, and on measuring radionuclides at very low concentrations in media of possible dosimetric significance, such as radioiodine in milk. Measurements at these low levels permitted comparisons of source terms with environmental radioactivity in terms of calculational models.     

Photochemical dispersion modeling: Review of model concepts and applications studies

Over the last decade, the development and application of sophisticated atmospheric models that simulate the transport and dispersion of ozone and its precursors have advanced rapidly. Further advancements are most likely to be found in more complete temporal and spatial characterization of photochemical smog formation processes via measurement. This paper provides an overview of the development of atmospheric photochemical dispersion models, first discussing in general terms the various physical processes occurring in the atmosphere that govern the formation, transport, and ultimate fate of ozone. Procedures for representing these physical processes in mathematical terms are presented next. Nearly all of the photochemical models in use today are derived from the semiempirical atmospheric diffusion equation, though theoretical formulations vary depending on which of the various terms in the pollutant mass balance equation are deemed significant for the application at hand. Examples of recent applications of the range of available photochemical model are presented, together with estimates of the accuracy of each generic modeling concept. Several topics warranting future research are identified, including the need to incorporate explicitly more of the stochastic (or probabilistic) nature of the atmosphere into the form of current photochemical model predictions (i.e., estimates of the variance and higher order moments of the predicted concentration distribution).     

A review of 20-year applications of multi-attribute decision-making in environmental and water resources planning and management

Environment, Development and Sustainability - Multi-attribute decision-making (MADM) is an umbrella term to describe a series of mathematical frameworks that, in essence, enable the decision-makers...     

Radionuclide migration in forest ecosystems--results of a model validation study

The primary objective of the IAEA's BIOMASS Forest Working Group (FWG) was to bring together experimental radioecologists and modellers to facilitate the exchange of information which could be used to improve our ability to understand and forecast radionuclide transfers within forests. This paper describes a blind model validation exercise which was conducted by the FWG to test nine models which members of the group had developed in response to the need to predict the fate of radiocaesium in forests in Europe after the Chernobyl accident. The outcomes and conclusions of this exercise are summarised. It was concluded that, as a group, the models are capable of providing an envelope of predictions which can be expected to enclose experimental data for radiocaesium contamination in forests over the time scale tested. However, the models are subject to varying degrees of conceptual uncertainty which gives rise to a very high degree of divergence between individual model predictions, particularly when forecasting edible mushroom contamination. Furthermore, the forecasting capability of the models over future decades currently remains untested.     

Ecological footprint: an indicator of environmental sustainability of a surface coal mine

Ecological footprint of mining can be used as an indicator to monitor and regulate mining operations and ensure long-term environmental sustainability. It can be viewed as a mining footprint, which is surrogate of the environmental impacts of mining. In this paper, a methodological framework is developed to demonstrate how ecological footprint can be used as an indicator of environmental degradation. Nine air quality and 26 soil quality samples are collected from the adjoining area of a mechanized coal mine, located in Raniganj coal mining belt of Burdwan district, West Bengal. Geographical information system is used for data interpolation and preparation of air and soil quality maps. The weights of different air and soil quality parameters are calculated by running principal component analysis. These derived weights are used for preparation of final composite air and soil quality maps. The composite maps show the mining footprints, expressed as land equivalent, around the active mine sites. The impact zones reveal the extent of degradation of the soil and air qualities in the areas near a mine. It is found that the impact zones, with respect to air and soil qualities, extend over areas which are 7.7 and 7.8 times the actual mining areas, that is, the area covered under mining operations, respectively. The results show the extent of degradation of air and soil qualities of the area. At different stages of mining, these footprints can be used as indicators to reveal the areas where soil and air qualities are adversely impacted.     

Radionuclide transfer to fruit in the IAEA TRS 364 Revision

Information on the transfer of radionuclides to fruits was almost absent in the former TRS 364 “Handbook of parameter values for the prediction of radionuclide transfer in temperate environments”. The revision of the Handbook, carried out under the IAEA Programme on Environmental Modelling for RAdiation Safety (EMRAS), takes into account the information generated in the years following the Chernobyl accident and the knowledge produced under the IAEA BIOMASS (Biosphere Modelling and Assessment) Programme in the years 1997–2000. This paper describes the most important processes concerning the behaviour of radionuclides in fruits reported in the IAEA TRS 364 Revision and provides recommendations for research and modelling.     

X-ray absorption spectroscopy studies of reactions of technetium, uranium and neptunium with mackinawite

Technetium, uranium and neptunium may all occur in the environment in more than one oxidation state (IV or VII, IV or VI and IV or V respectively). The surface of mackinawite, the first-formed iron sulfide phase in anoxic conditions, can promote redox changes so a series of laboratory experiments were carried out to explore the interactions of Tc, U and Np with this mineral. The products of reaction were characterised using X-ray absorption spectroscopy. Technetium, added as TcO4(-), is reduced to oxidation state IV and forms a TcS(2)-like species. On oxidation of the mackinawite in air to form goethite, Tc remains in oxidation state IV but in an oxide, rather than a sulfide environment. At low concentrations, uranium forms uranyl surface complexes on oxidised regions of the mackinawite surface but at higher concentrations, the uranium promotes surface oxidation and forms a mixed oxidation state oxide phase. Neptunium is reduced to oxidation IV and forms a surface complex with surface sulfide ions. The remainder of the Np coordination sphere is filled with water molecules or hydroxide ions.     

Capillary zone electrophoretic studies on Norwegian surface water natural organic matter

Capillary zone electrophoresis (CZE) is a useful tool for the analysis of the electrophoretic behavior of anionic polyelectrolytes like humic substances. CZE was used to compare natural organic matter (NOM) with high ash content obtained by reverse osmosis (RO) and low temperature, low pressure evaporation (Ev.) from different Norwegian surface water sources. The quantitative relation between the resulting electrophoretic signals (peak height and area) and the carbon amount of the injected NOM samples was found linear. The NOM gave homogeneous signals in CZE, with a distribution of the detection signals around an average electrophoretic mobility (AEM) corresponding to the charge density distribution of the NOM, governed by the distribution of their molecular sizes and acidities. Like humic substances, NOM only appears as anions in capillary electrophoresis (CE), but the high ash content of these samples and the presence of metals strongly influenced their mobilities at lower pH. CZE could be used as a tool for the rapid evaluation of the average net charge and the molecular radius of the NOM at pH 5.1.     

收入差距是否影响环境质量?——国内外研究综述

近年来,收入差距扩大与环境质量恶化成为许多国家同时面临的问题,也让一些经济学家开始思考,这两者之间是否存在关联。继20世纪90年代环境库兹涅茨曲线提出以来,一些研究发现不仅收入的绝对水平会对环境质量产生影响,收入差距对环境质量也有影响。本文对这一课题的理论研究进行了梳理,发现现有理论中收入差距对环境质量的影响途径主要有三条。第一条途径是消费者途径,即收入差距影响着以消费为主的个人经济行为,进一步影响着社会消费总量和消费结构,及其过程中产生的污染总量。第二条途径是企业途径,即认为收入差距的扩大会削弱环保型产品的正外部性,不利于环保技术的创新活动,对未来环境质量的改善产生动态影响。第三条途径是政府途径,即认为收入差距会影响相关的环境政策方式与强度选择;而且在不同的社会政策决策机制下,收入差距对环境政策的影响也是不同的,现有的社会决策机制分析框架主要有两种——权利权重型社会决策规则和简单多数规则。此外,本文还对现存的主要实证研究进行了总结,发现大多数研究结论都支持收入差距对环境质量存在着影响,但这种影响并不是线性的。一方面,收入差距对环境的影响与研究的污染物种类有关,大多数研究都显示,收入不平等对CO 2排放和土壤污染存在着负向影响,但有关收入差距对空气污染和水污染影响的研究结论并不统一或并不显著。另一方面,这种影响还与经济发展水平相关,在高收入国家与低收入国家是不同的,存在着阈值效应。最后本文总结了针对中国的研究现状,讨论了其在我国的适用性。     

Radionuclide content of building materials and associated gamma dose rates in Egyptian dwellings

Studies have been carried out to determine the natural radioactivity in some building materials (bricks, tiles, marble and ceramics) and their associated radiation hazard. The radioactivity concentrations of ²²⁶Ra ²³²Th and ⁴⁰K were measured using a gamma spectrometer with a Hp–Ge detector. The activities of ²³⁸U and ²³⁴U were measured using an alpha-spectrometer with a surface barrier detector after applying a radiochemical procedure. The ²³⁴U/²³⁸U isotopic ratios were calculated. The radium equivalent activities and the radiation hazard index associated with the natural radionuclides were calculated. A computer program was developed and applied to calculate the dose rate a person will receive from the walls of a room constructed from the studied building materials.     

Pollution studies on Nigerian rivers: The onset of lead pollution of surface waters in Ibadan

Lead levels in the waters and sediments of the lake of the International Institute of Tropical Agriculture, Agodi Lake, Oba Lake, at three stations on Ogunpa stream, and at three stations on Ona River were measured from October 1977 to June 1978, using the combined APDC-MIBK-flame atomic absorption spectrophotometry technique. The lead levels recorded ranged from 0.2 to 46 μg/L for the aqueous phases; however, the levels in the sediments were much higher, ranging from about 18 to 85 mg/kg (dry weight). Although there is nothing alarming about these levels, the levels of lead in water bodies located in areas with high traffic density were consistently higher than levels for comparable waters in low traffic density areas. Similarly, lead levels were significantly higher in the fresh sediments of water bodies in areas with high traffic density, clearly indicating the onset of lead pollution for those high traffic density areas.     

Pollution studies on Nigerian rivers: Toxic heavy metal status of surface waters in Ibadan City

The levels of the heavy elements cadmium, copper, cobalt, iron, manganese, nickel, lead, and zinc in the major streams and man-made lakes in and around Ibadan City were determined at roughly two monthly intervals between August 1977 and February 1979. They were found to be in the ppb and sub-ppb level except for iron and manganese which were in the ppm range. To assess the quality of these waters with respect to heavy metal contamination, a comparison is made between our results, world averages for both freshwater and seawater, and international water quality standards for drinking water. All elements, except iron manganese, were well within the safety limits. The low level of industrialization in Ibadan has kept its streams and lakes relatively free from heavy metal contamination.