Study of the comparative dynamics of the incorporation of tissue free-water tritium (TFWT) in bulrushes (Typha latifolia) and carp (Cyprinus carpio) in the Almaraz nuclear power plant cooling reservoir

The Almaraz nuclear power plant (Spain) uses the water of Arrocampo reservoir for cooling, and consequently raises the radioactive levels of the aquatic ecosystem of this reservoir. From July 2002 to June 2005, monthly samples of surface water, bulrushes (Typha latifolia) and carp (Cyprinus carpio) were collected from this reservoir. They were analyzed to determine the temporal evolution of the levels of ³H in surface water and of its transfer from the surface water to free-water in the tissues (TFWT) of the aforementioned two organisms. The tritium levels in the surface water oscillate with a biannual period, with their values in the study period ranging between 53 and 433 Bq/L. The incorporation of tritium to bulrushes and carp was fairly similar, the respective mean concentration factors being 0.74 and 0.8 (unitless, as Bq/L tissue water per Bq/L reservoir water). The temporal evolution of the levels fairly closely followed that observed for the surface water tritium, although detailed analysis showed the dominant periodicity for the bulrushes to be annual. This difference reflects the influence on the incorporation of tritium to bulrushes of diverse environmental and metabolic factors, especially evapotranspiration and the seasonal growth of this plant.     

Assessment, validation and intercomparison of operational models for predicting tritium migration from routine discharges of nuclear power plants: the case of Loire River

During last decades, a number of projects have been launched to validate models for predicting the behaviour of radioactive substances in the environment. The project of the "Aquatic" working group of the project EMRAS (Environmental Modelling for Radiation Safety) organised by the International Atomic Energy Agency (IAEA) was based on the validation and assessment of models for predicting the behaviour of radionuclides in the aquatic ecosystems. The present paper describes a blind test of models aimed at assessing the dispersion of tritium releases in the Loire River (France), on a large domain ( approximately 350km) and on a period of six months, by comparing the results obtained by operational-to-experimental values of tritium concentration at Angers, a city along the Loire River. The common conclusion is that the models used by the different participants namely 1D models and models based on a schematic hydraulic (box models) are reliable tools for tritium transport modelling. Nevertheless, the importance of proper and detailed hydrological data for the appropriate prediction of pollutant migration in water is demonstrated by the example provided during this study.     

Movement of a tritium plume in shallow groundwater at a legacy low-level radioactive waste disposal site in eastern Australia

Between 1960 and 1968 low-level radioactive waste was buried in a series of shallow trenches near the Lucas Heights facility, south of Sydney, Australia. Groundwater monitoring carried out since the mid 1970s indicates that with the exception of tritium, no radioactivity above typical background levels has been detected outside the immediate vicinity of the trenches. The maximum tritium level detected in groundwater was 390 kBq/L and the median value was 5400 Bq/L, decay corrected to the time of disposal. Since 1968, a plume of tritiated water has migrated from the disposal trenches and extends at least 100 m from the source area. Tritium in rainfall is negligible, however leachate from an adjacent landfill represents a significant additional tritium source. Study data indicate variation in concentration levels and plume distribution in response to wet and dry climatic periods and have been used to determine pathways for tritium migration through the subsurface.     

Forecasting the consequences of accidental releases of radionuclides in the atmosphere from ensemble dispersion modelling.

The RTMOD system is presented as a tool for the intercomparison of long-range dispersion models as well as a system for support of decision making. RTMOD is an internet-based procedure that collects the results of more than 20 models used around the world to predict the transport and deposition of radioactive releases in the atmosphere. It allows the real-time acquisition of model results and their intercomparison. Taking advantage of the availability of several model results, the system can also be used as a tool to support decision making in case of emergency. The new concept of ensemble dispersion modelling is introduced which is the basis for the decision-making application of RTMOD. New statistical parameters are presented that allow gathering the results of several models to produce a single dispersion forecast. The devised parameters are presented and tested on the results of RTMOD exercises.     

Modelling tritium flux from water to atmosphere: application to the Loire River

Tritium (³H or T) is one of the major radionuclides released by nuclear power plants (NPP) into rivers. However, tritiated water (HTO) flux from water to air is seldom considered when assessing health effects of such releases. The aim of this paper is to present the result of a research program, called LORA, conducted on the Loire River (France). To improve our understanding of HTO flux from surface water to air, three field campaigns were organised during the NPP’s radioactive releases to measure simultaneously the activity concentrations in air on the riverbank, using an innovative system, and in river water. The measurements showed that during radioactive releases, water vapour was enriched in ³H. These results were used to calibrate exchange velocities. The average of these estimated exchange velocities was more than one order of magnitude higher than those calculated in the literature from indoor experiments. The variability of these values was also larger, showing that outdoor studies cover a wide range of conditions influencing HTO flux. No correlation was observed between exchanges velocities and meteorological conditions. However, there was a significant difference between day and night with a higher value observed during the day. Two approaches used to calculate HTO evaporation from water (i.e. the approach based on water evaporation and the approach considering that HTO follows its own concentration gradient) were included in a hydrodynamic model, which was used to evaluate HTO air activity along the Loire River. In conclusion, only the approach considering that HTO follows its own gradient led to a good agreement between measurements and predictions. A one-year simulation was done to estimate the contribution of this process to the dose. Its contribution can be considered as negligible in this case compared to the other pathways such as ingestion of water or foodstuffs.     

Rain scavenging of tritiated water vapour: a numerical Eulerian stationary model

The tradition in tritium washout modeling is to unite the washout model with a Gaussian plume model describing dispersion of tritium vapour in the atmosphere. In the present study, an alternative approach is proposed. A numerical Eulerian model that describes washout independently of dispersion is developed.The sensitivity analysis to model parameters has shown that the washout process is influenced most significantly by rainfall parameters and air temperature: different raindrop size distributions cause differences of up to about 70% in the washout outputs; a change of 15 °C in the air temperature causes an effect of about 50%.Results are presented showing calculated values of washout outputs (tritium concentration in rain, tritium downward flux, washout coefficient) for different tritium vapour profiles, rainfall rates and air temperatures. The general conclusion is that the washout process is too complex to be described comprehensively by the simple washout coefficient concept. We suggest the approach proposed here for directly calculating the tritium downward flux and concentration in the rainwater is preferable.     

Upward movement of tritium from contaminated groundwaters: a numerical analysis

This paper describes a research-oriented modelling exercise that addresses the problem of assessing the movement of tritium from a contaminated perched aquifer to the land surface. Participants were provided with information on water table depth, soil characteristics, hourly meteorological and evapotranspiration data. They were asked to predict the upward migration of tritium through the unsaturated soil into the atmosphere. Eight different numerical models were used to calculate the movement of tritium. The modelling results agree within a factor of two, if very small time and space increments are used. The agreement is not so good when the near-surface soil becomes dry. The modelling of the alternate upward and downward transport of tritium close to the ground surface generally requires rather complex models and detailed input because tritium concentration varies sharply over short distances and is very sensitive to many interactive factors including rainfall amount, evapotranspiration rate, rooting depth and water table position.     

Measured and modelled tritium concentrations in freshwater Barnes mussels (Elliptio complanata) exposed to an abrupt increase in ambient tritium levels

To improve understanding of environmental tritium behaviour, the International Atomic Energy Agency (IAEA) included a Tritium and C-14 Working Group (WG) in its EMRAS (Environmental Modelling for Radiation Safety) program. One scenario considered by the WG involved the prediction of time-dependent tritium concentrations in freshwater mussels that were subjected to an abrupt increase in ambient tritium levels. The experimental data used in the scenario were obtained from a study in which freshwater Barnes mussels (Elliptio complanata) were transplanted from an area with background tritium concentrations to a small Canadian Shield lake that contains elevated tritium. The mussels were then sampled over 88 days, and concentrations of free-water tritium (HTO) and organically-bound tritium (OBT) were measured in the soft tissues to follow the build-up of tritium in the mussels over time.The HTO concentration in the mussels reached steady state with the concentration in lake water within one or two hours. Most models predicted a longer time (up to a few days) to equilibrium. All models under-predicted the OBT concentration in the mussels one hour after transplantation, but over-predicted the rate of OBT formation over the next 24 h. Subsequent dynamics were not well modelled, although all participants predicted OBT concentrations that were within a factor of three of the observation at the end of the study period. The concentration at the final time point was over-predicted by all but one of the models. The relatively low observed concentration at this time was likely due to the loss of OBT by mussels during reproduction.     

Assessment of state-of-the-art models for predicting the remobilisation of radionuclides following the flooding of heavily contaminated areas: the case of Pripyat River floodplain

The performances of models are assessed to predict the wash-off of radionuclides from contaminated flooded areas. This process should be accounted for in the proper management of the aftermath of a nuclear accident. The contamination of the Pripyat River water following the inundation of a floodplain heavily contaminated by (90)Sr and (137)Cs of Chernobyl origin is used as the basis for modelling. The available experimental evidence demonstrated that remobilisation of radiostrontium is an important process implying a significant secondary radioactive load of water flowing over the contaminated floodplain. On the contrary, there is no empirical evidence of a similar behaviour for radiocaesium. In general, state-of-the-art models properly predicted the remobilisation of strontium, whereas they significantly overestimated radiocaesium concentrations in water. The necessary model improvements for a more accurate prediction of radiocaesium contamination levels include a reassessment of the values of the model parameters controlling the remobilisation process.     

A modelling study on 137Cs and 239,240Pu behaviour in the Alborán Sea, western Mediterranean

A model for simulating the dispersion processes of 137Cs and 239,240Pu in the Alborán Sea is described. The model consists of two hydrodynamic models: a 2D depth-averaged model and a two-layer model which provide tidal and geostrophic currents, respectively; a sediment transport model which provides suspended particle concentrations and sedimentation rates over the domain; and the radionuclide dispersion model including interactions of dissolved radionuclides with suspended particles and bed sediments. These processes are formulated using kinetic transfer coefficients. The hydrodynamic and sediment models are run and validated in advance, and their results are then used to simulate the dispersion of 137Cs and 239,240Pu, which are introduced from atmospheric fallout. Radionuclide concentrations in the water column and distributions in bed sediments have been compared with measurements in the sea. Both set of data are, in general, in agreement. The model has also been applied to calculate radionuclide fluxes through the Strait of Gibraltar. These computed fluxes have been compared with previous estimations as well.     

Experimental investigation and modelling of tritium washout by precipitation in the area of the nuclear power plant of Paks, Hungary

Tritium occurs in nature in trace amounts, but its concentration is changing due to natural and artificial sources. Studies focusing on natural tritium have to take into account the effect of artificial sources. Also, the impact of tritium is an important issue in environmental protection, e.g. in connection with the emissions from nuclear power plants. The present work focuses on the rain washout of tritium emitted from the Paks nuclear power plant in Hungary. Rainwater collectors were placed around the plant and after a period of precipitation, rainwater was collected and analysed for tritium content. Samples were analysed using low-level liquid scintillation counting, with some also subject to the more accurate ³He ingrowth method. The results clearly show the trace of the tritium plume emitted from the plant; however, values are only about one order of magnitude higher than environmental background levels. A washout model was devised to estimate the distribution of tritium around the plant. The model gives slightly higher concentrations than those measured in the field, but in general the agreement is satisfactory. The modelled values demonstrate that the effect of the plant on rainwater tritium levels is negligible over a distance of some kilometres.     

He mass spectrometry for very low-level measurement of organic tritium in environmental samples

The design, setup and performance of a mass spectrometric system for the analysis of low to very low-level tritium in environmental samples are described. The tritium concentration is measured indirectly by the ³He ingrowth from radioactive decay after complete initial degassing of the sample. The analytical system is fully computer-controlled and consists in a commercial helium isotope mass spectrometer coupled with a high vacuum inlet system. A detection limit of 0.15 Bq/kg is routinely obtainable for sample sizes of 20 g of water equivalent and an accumulation time of three months. Larger samples (and/or longer accumulation time) can be used to obtain lower detection limits. In addition to the benefit of a lower detection limit, another advantage of this non-destructive method lies in the simplicity of the analytical procedure which strongly limits the risk of contamination. An inter-comparison was successfully performed with the conventional beta counting technique on lyophilized grass samples, in a range of tritium concentrations of environmental interest. It shows that the ³He mass spectrometry method yields results that are fully consistent with the conventional liquid scintillation technique over a wide range of tritium concentrations.     

Water management and aquatic ecosystem services of a tropical reservoir (Itaparica,São Francisco,Brazil)

Reservoirs have a wide variety of uses that have led to frequent conflicts over ecological conservation and contamination, especially as land management has intensified. Oligotrophication must be implemented in numerous tropical reservoirs that experience advanced eutrophication to maintain aquatic ecosystem functions. To quantify impacts on ecosystem functions and to develop an adaptive management policy, multiple studies have been conducted on the Itaparica Reservoir, São Francisco River, in the semi-arid north-eastern region of Brazil. Here, we add to that existing body of knowledge through investigating how nutrient accumulation is affected by water exchange between the main river flow and Icó-Mandantes Bay. Operational water-level fluctuations in the reservoir create large desiccated littoral areas that release high amounts of nutrients when they are rewetted. In particular, water-level variation promotes proliferation of Egeria densa, a noxious weed, thus elevating trophic levels of the Itaparica Reservoir and Icó-Mandantes Bay. Analysis with a P efficiency model determined 25 μg P L^?1 to be the critical concentration and further indicated that the critical load in both bodies of water have been exceeded. Moreover, intensive fish aquaculture using net cages has led to further overtaxing of the reservoir. We conclude that an effective ecological reservoir management policy must involve oligotrophication, harvesting of noxious water weeds for use as soil amendment in agriculture or biogas production, “blue” aquaculture, and limiting hydroelectric power production based on current water availability.     

Concentration of radionuclides in hydrosphere affected by Temelín Nuclear Power Plant in Czech Republic

The paper presents results of a long-term field study of the possible impact of Temelín NPP on the Vltava and Elbe Rivers. The study was divided into 2 stages: before and after the operation of the NPP. The main goal of the investigation before the operation (1989–2000) was to determine the background levels of radionuclides resulting from the tests of nuclear weapons and the Chernobyl accident for different components of the environment. The paper discusses also the risk of a river radioactive contamination due to the tritium discharges in wastewater from Temelín NPP. During the operation period of 2001–2006, the results of the monitoring did not detect any impact of Temelín NPP on the concentrations of activation and fission products in the hydrosphere, apart from tritium. The annual average tritium concentrations in the Vltava River correspond with the previously calculated predictions for the conditions of the average and minimum guaranteed flows. The maximum concentration of tritium of 26.6 Bq/l in Vltava River at Prague was observed after dry period in 2003.     

The Bulgarian Emergency Response System for dose assessment in the early stage of accidental releases to the atmosphere

The Bulgarian Emergency Response System (BERS) is being developed in the Bulgarian National Institute of Meteorology and Hydrology since 1994. BERS is based on numerical weather forecast meteorological information and a numerical long-range dispersion model accounting for the transport, dispersion, chemical and radioactive transformations of pollutants. In the present paper, the further development of this system for a mixture of radioactive gaseous and aerosol pollutants is described. The basic module for the BERS, the numerical dispersion model EMAP, is upgraded with a “dose calculation block”. Two scenarios for hypothetical accidental atmospheric releases from two NPPs, one in Western, and the other in Eastern Europe, are numerically simulated. The effective doses from external irradiation, from air submersion and ground shinning, effective dose from inhalation and absorbed dose by thyroid gland formed by 37 different radionuclides, significant for the early stage of a nuclear accident, are calculated as dose fields for both case studies and discussed.     

A box model for calculation of collective dose commitment from radioactive waterborne releases to the baltic sea

To meet the new regulations of maximum yearly releases from Swedish nuclear power plants issued by the Swedish National Radiation Protection Institute, and to make realistic calculations of collective dose commitment derived from radionuclides discharged to the Baltic Sea, a box model AQUAPATH-BALTIC has been developed. The model calculates radionuclide concentrations in 25 boxes for discharges into given compartments and takes into consideration the dispersion rates of the water masses, the sediment-water interaction and radioactive decay. The calculated concentrations in water and sediment at steady state are then used to evaluate individual and collective intakes of activity and external exposures. The radiation doses to the global population following discharges to the Baltic Sea are also calculated.     

A follow up of the decrease of non exchangeable organically bound tritium levels in the surroundings of a nuclear research center

In the past decades limited amounts of tritium were handled on the CEA site of Bruyères le Châtel with authorised atmospheric releases. A small fraction of the tritium released entered into environmental samples under three forms: (i) as part of free water (TFWT - Tissue Free Water Tritium), or associated with organic matter in two ways; either (ii) bound to the oxygen and nitrogen atoms of the material as exchangeable organically bound tritium (E-OBT), or (iii) bound to carbon atoms as non exchangeable organically bound tritium (NE-OBT). The first two components provide only a picture of atmospheric tritium concentrations at the sampling time as they are in equilibrium with atmospheric moisture and soil humidity. Unlike these exchangeable forms, however, NE-OBT is tightly bound to the organic matter and provides an integrated record of atmospheric tritium during the growing phase of the vegetation. We mapped NE-OBT in tree leaf samples in an area of about 25 × 30 km² around the centre of the CEA site and compared the results with those obtained during a previous sampling exercise in 1989. At this time, the activity levels were almost ten times higher than those observed presently in a similar area almost 20 years later which is consistent with the decrease of atmospheric releases issued from the centre. As the activity levels are now close to environmental background specific attention was also paid to the analytical procedure to ensure reliable low level NE-OBT detection.     

Using radiotracer techniques for coastal hydrodynamic model evaluation

A three-dimensional (3D) water circulation and contaminant transport model of Manila Bay has been developed with the aim of better understanding the formation and movement of harmful algal blooms. Radiotracer techniques were used to evaluate the model by recording the dispersion of a tracer at depths of 2 and 15 m near the injection point. The selected tracer was 99mTc eluted from a molybdenum/technetium medical generator. The rationale for the choice of the tracer and the location of the injection is discussed. At 2 m the transport was dominated by the prevailing winds, and at 15 m by tidally induced currents. The development of the hydrodynamic model and its experimental evaluation were iterative processes. The experimental study confirmed the need for full 3D modelling of Manila Bay; quantified the impact of the prevailing wind field on contaminant dispersion near the injection point; and allowed the calculation of transverse dispersivity to guide the selection of parameter values used in the overall model.     

A study of the atmospheric dispersion of a high release of krypton-85 above a complex coastal terrain, comparison with the predictions of Gaussian models (Briggs, Doury, ADMS4)

Atmospheric releases of krypton-85, from the nuclear fuel reprocessing plant at the AREVA NC facility at La Hague (France), were used to test Gaussian models of dispersion. In 2001-2002, the French Institute for Radiological Protection and Nuclear Safety (IRSN) studied the atmospheric dispersion of 15 releases, using krypton-85 as a tracer for plumes emitted from two 100-m-high stacks. Krypton-85 is a chemically inert radionuclide. Krypton-85 air concentration measurements were performed on the ground in the downwind direction, at distances between 0.36 and 3.3 km from the release, by neutral or slightly unstable atmospheric conditions. The standard deviation for the horizontal dispersion of the plume and the Atmospheric Transfer Coefficient (ATC) were determined from these measurements. The experimental results were compared with calculations using first generation (Doury, Briggs) and second generation (ADMS 4.0) Gaussian models. The ADMS 4.0 model was used in two configurations; one takes account of the effect of the built-up area, and the other the effect of the roughness of the surface on the plume dispersion. Only the Briggs model correctly reproduced the measured values for the width of the plume, whereas the ADMS 4.0 model overestimated it and the Doury model underestimated it. The agreement of the models with measured values of the ATC varied according to distance from the release point. For distances less than 2 km from the release point, the ADMS 4.0 model achieved the best agreement between model and measurement; beyond this distance, the best agreement was achieved by the Briggs and Doury models.     

The source of anomalous radioactivity in the springs bordering the Sea of Galilee, Israel

Situated within the Jordan Rift Valley, along the shores of Lake Kinneret (Sea of Galilee) which serves as the national water reservoir of Israel, are saline hot springs that are notable for their enrichment in radon and radium. Though the anomalous radioactivity has been known for almost half a century, the source of the radioactive anomalies has been a subject of conjecture. Radiometric analysis of a rock core drilled through Mt. Arbel, situated to the west of the lake, reveals that the oil shale sequence of the Senonian En Zetim and Ghareb formations is strikingly deficient in radium. Mt. Arbel has been cut by Rift Valley related faults that serve as conduits for ascending brines. The organic matter enriched sequence is encountered in the subsurface at elevations lower than the water level of the nearby radioactive enriched hot springs. It is thus concluded that hot ascending brines underlying the lake flush through the organic matter enriched sequence and remove a substantial percentage of 226Ra from the uranium enriched organic material, before draining to the outlets of the springs. Saline springs that are in contact with organic matter enriched sequence show excess of radium and radon, while fresh water springs in the same stratigraphic position show only excess of radon.