An inexact dynamic optimization model for municipal solid waste management in association with greenhouse gas emission control

Municipal solid waste (MSW) should be properly disposed in order to help protect environmental quality and human health, as well as to preserve natural resources. During MSW disposal processes, a large amount of greenhouse gas (GHG) is emitted, leading to a significant impact on climate change. In this study, an inexact dynamic optimization model (IDOM) is developed for MSW-management systems under uncertainty. It grounds upon conventional mixed-integer linear programming (MILP) approaches, and integrates GHG components into the modeling framework. Compared with the existing models, IDOM can not only deal with the complex tradeoff between system cost minimization and GHG-emission mitigation, but also provide optimal allocation strategies under various emission-control standards. A case study is then provided for demonstrating applicability of the developed model. The results indicate that desired waste-flow patterns with a minimized system cost and GHG-emission amount can be obtained. Of more importance, the IDOM solution is associated with over 5.5 million tonnes of TEC reduction, which is of significant economic implication for real implementations. Therefore, the proposed model could be regarded as a useful tool for realizing comprehensive MSW management with regard to mitigating climate-change impacts.     

Comparative risk analysis for metropolitan solid waste management systems

Conventional solid waste management planning usually focuses on economic optimization, in which the related environmental impacts or risks are rarely considered. The purpose of this paper is to illustrate the methodology of how optimization concepts and techniques can be applied to structure and solve risk management problems such that the impacts of air pollution, leachate, traffic congestion, and noise increments can be regulated in the long-term planning of metropolitan solid waste management systems. Management alternatives are sequentially evaluated by adding several environmental risk control constraints stepwise in an attempt to improve the management strategies and reduce the risk impacts in the long run. Statistics associated with those risk control mechanisms are presented as well. Siting, routing, and financial decision making in such solid waste management systems can also be achieved with respect to various resource limitations and disposal requirements.     

The effects on waste reduction and recycling rates when different components of the waste stream are counted

States differ in the components or solid waste management activities which they include when determining solid waste reduction and recycling rates. Thus, when attempting to draw comparisons among states, confusion arises in two ways: (1) use of two types of rates; and (2) use of different components or activities when calculating a given rate. This paper presents a mathematical basis for understanding the impacts on rate calculations when variations occur in the components and activities included in those calculations. Estimates of the incremental changes occurring in the rate calculations when incineration or selected components such as yard waste, construction and demolition wastes, and junked automobiles, are added to a base of municipal solid waste constituents are found using national data. Finally, the achieved rates reported by states counting different combinations are compared.     

Overview of non-hazardous solid waste in the small island state of Mauritius

In Mauritius, solid waste disposal has been a cause for concern since the 1980s. Currently, there is no segregation of waste and some 1200 tonnes of solid waste are generated daily by the 1.24 million inhabitants of the island. As processes such as recycling and composting are still in their infancy stage, most of the waste generated have to be disposed of at the sole landfill. The solid waste management practices of 1980s and early 1990s are no longer compatible with the changing composition and quantity of wastes now generated. As a result, there is an urgency to review the whole waste management system and come forward with sustainable solutions.This paper presents an overview of the disposal of non-hazardous solid waste in Mauritius and provides recommendations for improving the current disposal system.     

An inexact reverse logistics model for municipal solid waste management systems

This paper proposed an inexact reverse logistics model for municipal solid waste management systems (IRWM). Waste managers, suppliers, industries and distributors were involved in strategic planning and operational execution through reverse logistics management. All the parameters were assumed to be intervals to quantify the uncertainties in the optimization process and solutions in IRWM. To solve this model, a piecewise interval programming was developed to deal with Min-Min functions in both objectives and constraints. The application of the model was illustrated through a classical municipal solid waste management case. With different cost parameters for landfill and the WTE, two scenarios were analyzed. The IRWM could reflect the dynamic and uncertain characteristics of MSW management systems, and could facilitate the generation of desired management plans. The model could be further advanced through incorporating methods of stochastic or fuzzy parameters into its framework. Design of multi-waste, multi-echelon, multi-uncertainty reverse logistics model for waste management network would also be preferred.     

Methodological aspects of life cycle assessment of integrated solid waste management systems

Environmental life cycle assessment (LCA) developed rapidly during the 1990s and has reached a certain level of harmonisation and standardisation. LCA has mainly been developed for analysing material products, but can also be applied to services, e.g. treatment of a particular amount of solid waste. This paper discusses some methodological issues which come into focus when LCAs are applied to solid waste management systems. The following five issues are discussed. (1) Upstream and downstream system boundaries: where is the ‘cradle’ and where is the ‘grave’ in the analysed system? (2) Open-loop recycling allocation: besides taking care of a certain amount of solid waste, many treatment processes also provide additional functions, e.g. energy or materials which are recycled into other products. Two important questions which arise are if an allocation between the different functions should be made (and if so how), or if system boundaries should be expanded to include several functions. (3) Multi-input allocation: in waste treatment processes, different materials and products are usually mixed. In many applications there is a need to allocate environmental interventions from the treatment processes to the different input materials. The question is how this should be done. (4) Time: emissions from landfills will continue for a long time. An important issue to resolve is the length of time emissions from the landfill should be considered. (5) Life cycle impact assessment: are there any aspects of solid waste systems (e.g. the time horizon) that may require specific attention for the impact assessment element of an LCA? Although the discussion centres around LCA it is expected that many of these issues are also relevant for other types of systems analyses.     

Affordable technologies for utilization of methane in a landfill environment: An example of an integrated technology array and evolving institutional networks

CARIBELATE, the Caribbean Environmental Laboratory for the Advancement of Technological Entrepreneurship is an evolving institutional concept, as well as a physical complex, that provides a dynamic environment for public, academic and private sector organizations to conduct proof of concept technology demonstrations in a landfill environment. This article traces the successful networking of demonstrations at a landfill in New Jersey and the subsequent design of the CARIBELATE project in the Municipality of Carolina, Puerto Rico. The institutional model developed for the Puerto Rico facility has brought together an unlikely combination of stakeholders. Those from the private sector, here called industrial partners, are paired with academic researchers to optimize products for local markets. The basic technology system demonstrated in New Jersey and to be replicated in Puerto Rico removes harmful contaminants from landfill gas and in so doing produces a variety of useful products. A portion of the landfill gas is utilized for micro‐turbine electricity generation and for heating a demonstration greenhouse that houses aquaculture coupled with hydroponic crop production, where aquaculture effluents are recycled as plant nutrients. A strict protocol to verify emission reduction is imposed on all the demonstrations at the CARIBELATE project. Although greenhouse gas credit verification is not the prime mission, it is suggested that the credits verified from these demonstrations are of high quality, and can serve as an excellent training platform. CARIBELATE is conceived to be operated at the municipal level and contribute to income generation and economic development. The continuing networking of stakeholders from the public and private sectors offers some potential guidance for replicating this design in the developing world.     

Solid waste management in European countries: a review of systems analysis techniques

In the past few decades, solid waste management systems in Europe have involved complex and multi-faceted trade-offs among a plethora of technological alternatives, economic instruments, and regulatory frameworks. These changes resulted in various environmental, economic, social, and regulatory impacts in waste management practices which not only complicate regional policy analysis, but also reshape the paradigm of global sustainable development. Systems analysis, a discipline that harmonizes these integrated solid waste management strategies, has been uniquely providing interdisciplinary support for decision making in this area. Systems engineering models and system assessment tools, both of which enrich the analytical framework of waste management, were designed specifically to handle particular types of problems. Though how to smooth out the barriers toward achieving appropriate systems synthesis and integration of these models and tools to aid in the solid waste management schemes prevalent in European countries still remains somewhat uncertain. This paper conducts a thorough literature review of models and tools illuminating possible overlapped boundaries in waste management practices in European countries and encompassing the pros and cons of waste management practices in each member state of the European Union. Whereas the Southern European Union (EU) countries need to develop further measures to implement more integrated solid waste management and reach EU directives, the Central EU countries need models and tools with which to rationalize their technological choices and management strategies. Nevertheless, considering systems analysis models and tools in a synergistic way would certainly provide opportunities to develop better solid waste management strategies leading to conformity with current standards and foster future perspectives for both the waste management industry and government agencies in European Union.     

Public opinion and siting solid waste landfills in Kuwait

Siting municipal solid waste landfills in Kuwait had not considered public concerns about the location of such facilities. Kuwait Municipality has disposed urban waste in abandoned sand quarries for the past 20 years in an unplanned fashion. Due to this improper siting criteria, environmental and health problems have risen from old landfills that are located in residential areas. In an effort to help responsible decision-makers in assessing public support for siting landfills a structured, yet simple, questionnaire was designed and distributed to a random sample of heads of households. Statistical techniques were employed to examine trends and relationships between the sample public responses concerning landfill siting criteria. The findings of the research indicated that a significant percentage of the responding sample did not know about the various landfill impacts and less than 50% were aware of the negative impacts of landfills on the public health and the environment. The visual appearance of the landfill scored the lowest impact in the opinion of the sample public while the most important aspect in siting a landfill appeared to be its economic consideration. The research findings also directed attention to the important role that the media could play in increasing public awareness. Results from the cross-classification analysis demonstrated the existence of differences in awareness levels according to age, nationality, martial status, education, and occupation of the responding sample. Statistically, these differences were significant at the 95% significance level, as supported by the test of the χ-square.     

城市固体废弃物管理系统温室气体排放核算研究综述

城市固体废弃物管理系统是产生温室气体的一个不可忽视的排放源。随着社会经济的快速发展和城市化水平的提高,城市固体废弃物排放量逐年增多,如何准确地核算城市固体废弃物管理系统温室气体排放已成为国内外关注的热点问题之一。本文概述了城市固体废弃物管理系统的演进与优化研究进展,重点对城市固体废弃物管理系统温室气体排放核算规范和标准及其影响因素的研究进行了综述,指出了研究中存在的问题。并进一步建议今后在城市不同类别的固体废弃物管理系统演进过程及其影响、温室气体排放的核算方法、温室气体排放的校正系数、城市固体废弃物管理系统的优化模式及温室气体减排机制等方面加强研究。     

Alternative scenarios to meet the demands of sustainable waste management

This paper analyses different alternatives for solid waste management that can be implemented to enable the targets required by the European Landfill and Packaging and Packaging Waste Directives to be achieved in the Valencian Community, on the east coast of Spain. The methodology applied to evaluate the environmental performance of each alternative is Life Cycle Assessment (LCA). The analysis has been performed at two levels; first, the emissions accounted for in the inventory stage have been arranged into impact categories to obtain an indicator for each category; and secondly, the weighting of environmental data to a single unit has been applied. Despite quantitative differences between the results obtained with four alternative impact assessment methods, the same preference ranking has been established: scenarios with energy recovery (1v and 2v) achieve major improvements compared to baseline, with scenario 1v being better than 2v for all impact assessment methods except for the EPS'00 method, which obtains better results for scenario 2v. Sensitivity analysis has been used to test some of the assumptions used in the initial life cycle inventory model but none have a significant effect on the overall results. As a result, the best alternative to the existing waste management system can be identified.     

Bioethanol from waste: Life cycle estimation of the greenhouse gas saving potential

This paper considers two alternative feedstocks for bioethanol production, both derived from household waste—Refuse Derived Fuel (RDF) and Biodegradable Municipal Waste (BMW). Life Cycle Assessment (LCA) has been carried out to estimate the GHG emissions from bioethanol using these two feedstocks. An integrated waste management system has been considered, taking into account recycling of materials and production of bioethanol in a combined gasification/bio-catalytic process. For the functional unit defined as the ‘total amount of waste treated in the integrated waste management system’, the best option is to produce bioethanol from RDF—this saves up to 196 kg CO₂ equiv. per tonne of MSW, compared to the current waste management practice in the UK.However, if the functional unit is defined as ‘MJ of fuel equiv.’ and bioethanol is compared with petrol on an equivalent energy basis, the results show that bioethanol from RDF offers no saving of GHG emissions compared to petrol. For example, for a typical biogenic carbon content in RDF of around 60%, the life cycle GHG emissions from bioethanol are 87 g CO₂ equiv./MJ while for petrol they are 85 g CO₂ equiv./MJ. On the other hand, bioethanol from BMW offers a significant GHG saving potential over petrol. For a biogenic carbon content of 95%, the life cycle GHG emissions from bioethanol are 6.1 g CO₂ equiv./MJ which represents a saving of 92.5% compared to petrol. In comparison, bioethanol from UK wheat saves 28% of GHG while that from Brazilian sugar cane – the best performing bioethanol with respect to GHG emissions – saves 70%. If the biogenic carbon of the BMW feedstock exceeds 97%, the bioethanol system becomes a carbon sequester. For instance, if waste paper with the biogenic carbon content of almost 100% and a calorific value of 18 MJ/kg is converted into bioethanol, a saving of 107% compared to petrol could be achieved. Compared to paper recycling, converting waste paper into bioethanol saves 460 kg CO₂ equiv./t waste paper or eight times more than recycling.     

Characterization of fuel gas products from the treatment of solid waste streams with a plasma arc torch

This work addresses the plasma treatment of two solid waste streams and production of fuel gases from the process. In this study, carpet waste and simulated solid wastes generated by a United States Air Force Basic Expeditionary Airfield Resources Base deployment were used. Waste was treated in a furnace fitted with a 100kW plasma arc torch. The off gas was analyzed to determine its composition. The product gas was composed primarily of carbon monoxide and hydrogen, with small amounts of methane, benzene and toluene also detected. These experiments demonstrate the feasibility of producing fuel gases by plasma treatment of the solid waste streams. While the thermal energy value of the fuel gas produced in these experiments was less than the energy input, a higher waste-to-fuel gas conversion efficiency is expected in full-scale application.     

A choice experiment analysis for solid waste disposal option: a case study in Malaysia

In Malaysia, most municipal wastes currently are disposed into poorly managed 'controlled tipping' systems with little or no pollution protection measures. This study was undertaken to assist the relevant governmental bodies and service providers to identify an improved waste disposal management strategy. The study applied the choice experiment technique to estimate the nonmarket values for a number of waste disposal technologies. Implicit prices for environmental attributes such as psychological fear, land use, air pollution, and river water quality were estimated. Compensating surplus estimates incorporating distance from the residences of the respondents to the proposed disposal facility were calculated for a number of generic and technology-specific choice sets. The resulting estimates were higher for technology-specific options, and the distance factor was a significant determinant in setting an equitable solid waste management fee.     

A mixed integer linear programming model for optimisation of organics management in an integrated solid waste system

In this paper, the authors propose a mixed integer linear programming model for designing an Integrated Solid Waste Management System (ISWMS) to meet specific economic goals. The model refers to a set of municipalities, known as ‘local basin’, which have to share a common waste management system. At the municipal level the model allows for an identification of the optimal collection service option; at the local basin level, the model provides the optimal waste flow appropriate to the collection service option of each municipality. The model has been applied to a full-scale case study of an area located in southeast Italy. A scenario analysis was carried out to investigate alternative municipal solid waste management options, which fundamentally differ in the organic flow mass rate to be either collected and composted or landfilled. Findings show that an increase in the cost of landfilling determines the optimal collection scenario and the configuration plants tend to recover higher rates of organics in separate collection and thus higher refuse derived fuel productions. The results obtained validate the application of the model in both the strategic planning and operational phases, by supporting public administrators at both municipality and local basin level in decision making and evaluation of technical and economic performances of ISWMSs.     

An inexact two-stage mixed integer linear programming method for solid waste management in the City of Regina

In this study, an interval-parameter two-stage mixed integer linear programming (ITMILP) model is developed for supporting long-term planning of waste management activities in the City of Regina. In the ITMILP, both two-stage stochastic programming and interval linear programming are introduced into a general mixed integer linear programming framework. Uncertainties expressed as not only probability density functions but also discrete intervals can be reflected. The model can help tackle the dynamic, interactive and uncertain characteristics of the solid waste management system in the City, and can address issues concerning plans for cost-effective waste diversion and landfill prolongation. Three scenarios are considered based on different waste management policies. The results indicate that reasonable solutions have been generated. They are valuable for supporting the adjustment or justification of the existing waste flow allocation patterns, the long-term capacity planning of the City's waste management system, and the formulation of local policies and regulations regarding waste generation and management.     

Solid waste management in urban areas: Development and application of a decision support system

A decision support system (DSS) developed to assist the planner in decisions concerning the overall management of solid waste at a municipal scale is described. The DSS allows to plan the optimal number of landfills and treatment plants, and to determine the optimal quantities and the characteristics of the refuse that has to be sent to treatment plants, to landfills and to recycling. The application of the DSS is based on the solution of a constrained non-linear optimization problem. Various classes of constraints have been introduced in the problem formulation, taking into account the regulations about the minimum requirements for recycling, incineration process requirements, sanitary landfill conservation, and mass balance. The cost function to be minimized includes recycling, transportation and maintenance costs. The DSS has been tested on the municipality of Genova, Italy, and the results obtained are presented.     

Issues for small businesses with waste management

Participation by small and medium enterprise (SME) in corporate social responsibility issues has been found to be lacking. This is a critical issue, as individually SMEs may have little impact on the environment but their collective footprint is significant. The management style and ethical stance of the owner-manager affects business decision making and therefore has a direct impact on the environmental actions of the business. Although adoption of environmental practices to create competitive advantage has been advocated, many businesses see implementation as a cost which cannot be transferred to their customers. After a brief review of pertinent literature this paper reports on an exploratory investigation into the issue. Results show that whereas owner-managers of small enterprises express concern regarding the environment, this does not then translate into better waste management practices.