啤酒酵母菌对溶液中锶离子的吸附行为

利用废弃啤酒酵母菌为生物吸附剂,考察了pH、啤酒酵母菌加入量、锶离子初始浓度、吸附时间等对锶离子吸附行为的影响,并通过红外光谱分析探讨了吸附机制.结果表明:(1)在吸附温度为25℃、pH为4.5、啤酒酵母菌加入量为2.0 g/L、锶离子初始质量浓度为10.0 mg/L、吸附60 min的条件下,啤酒酵母菌对锶离子的吸附基本达到平衡.(2)啤酒酵母菌对锶离子的吸附较好地符合Langmuir和Freundlich吸附等温式,且以Langmuir吸附等温式拟合效果更优.在吸附温度为25℃、pH为4.5、啤酒酵母菌加入量为2.0 g/L、吸附时间为180 min、锶离子初始质量浓度为5.0～250.0 mg/L的条件下,啤酒酵母菌对锶离子的理论饱和吸附量为29.67 mg/g.(3)啤酒酵母菌吸附锶离子前后的红外图谱显示.部分吸收峰发生了位移并且透过率改变.推断在啤酒酵母菌吸附锶离子的过程中,锶离子先与NH2和酰胺基团中的N原子进行配位络合,随后被络合了的锶作为成核位点再吸附更多的锶离子在表面.此外,蛋白质特征谱带--酰胺Ⅰ带和酰胺Ⅱ带吸收峰的透过率也发生变化,可能是啤酒酵母菌蛋白质上的官能团也结合了锶离子.     

一株产絮酵母菌废菌体对Cd2+的吸附特性

将一株产絮酵母菌(编号B-02号)发酵后的废菌体制成生物吸附剂,研究该生物吸附剂对废水中Cd2+的生物吸附特性。结果表明:(1)pH值对Cd2+会产生较大的影响,偏酸性(pH=4～6)条件利于吸附;该吸附剂对Cd2+吸附速率较快,8～10 min就可达到吸附平衡;(2)吸附剂的吸附动力学符合二级动力学模型,吸附Cd2+的实验数据对Langmuir等温式的拟合情况良好,吸附剂吸附Cd2+的最大吸附量为70.752 mg/g。用0.5 mol/L HNO3对吸附Cd2+的酵母菌进行解吸,解吸率可达89.7%。     

沸石吸附及其固定化微生物间歇式活性污泥法同时硝化反硝化脱氮的研究

以2种粒径(＜0.25 mm和0.2～1.0 mm)的天然沸石为实验材料,进行沸石吸附NH4+实验以及吸附饱和后固定化微生物间歇式活性污泥法(SBR)同时硝化反硝化(SND)脱氮实验.结果表明,实验沸石对NH4+的吸附等温线符合Langmuir吸附模型,小粒径天然沸石吸附NH4+效率较高.将小粒径天然沸石投加到SBR反应器中,与平行实验的SBR反应器相比发现,天然沸石在再生的同时能够增强SBR反应器的脱氮效率.     

固定化啤酒废酵母对Cr(VI)的吸附

用2%海藻酸钠与1%明胶混合作为包埋剂固定啤酒废酵母,研究固定化啤酒废酵母对Cr(Ⅳ)的吸附特性.结果表明,固定化啤酒废酵母吸附Cr(Ⅵ)受吸附时间、起始pH、固定化菌体浓度、cr(Ⅵ)起始浓度及共存离子等因素的影响.确定固定化啤酒废酵母对Cr(Ⅵ)最佳吸附条件为:pH 2,Cr(Ⅵ)起始浓度100 mg/L,固定化菌体浓度2 g/L,吸附90 min.此条件下Cr(Ⅵ)的吸附率可达96.8%.Pd2+等并存离子可抑制固定化啤酒废酵母对Cr(Ⅵ)的吸附.用1 mol/L盐酸洗脱固定化啤酒废酵母所吸附的Cr(Ⅵ)3 h,解吸率为93.6%.     

固定化啤酒废酵母对Cr(Ⅵ)的吸附

用2%海藻酸钠与1%明胶混合作为包埋剂固定啤酒废酵母,研究固定化啤酒废酵母对Cr(Ⅵ) 的吸附特性。结果表明,固定化啤酒废酵母吸附Cr(Ⅵ) 受吸附时间、起始pH 、固定化菌体浓度、Cr(Ⅵ) 起始浓度及共存离子等因素的影响。确定固定化啤酒废酵母对Cr(Ⅵ) 最佳吸附条件为：pH 2,Cr(Ⅵ) 起始浓度100 mg/L ,固定化菌体浓度2 g/L,吸附90 min 。此条件下Cr(Ⅵ) 的吸附率可达96.8%。Pd²⁺等并存离子可抑制固定化啤酒废酵母对Cr(Ⅵ) 的吸附。用1 mol/L盐酸洗脱固定化啤酒废酵母所吸附的Cr(Ⅵ) 3 h,解吸率为93.6%。     

酵母菌对不同液相体系中锌离子的吸附行为

主要对面包酵母菌在Zn2+和Zn2+-Pb2+两种离子体系中Zn2+的吸附行为进行了探讨。选择灭活面包酵母菌为吸附剂,对pH、菌体加入量等吸附影响因素进行了探讨并进行了吸附动力学过程和等温吸附效果的研究。结果表明,不同离子体系中相同初始浓度情况下,动力学研究显示实验所用面包酵母菌对溶液中Zn2+而言是一种快速高效的生物吸附剂,且在整个吸附过程中存在:qt(Pb2+)qt(Zn2+-Pb2+)qt(Zn2+)。实验条件下,以单离子体系中的Zn2+、Pb2+和双离子体系中的总离子为研究对象时,都能很好符合Langmuir等温吸附模型,计算获得面包酵母菌对不同离子体系的最大吸附量大小顺序为:qmax(Zn2+-Pb2+)qmax(Zn2+)qmax(Pb2+);然而通过对动力学吸附过程、实际平衡吸附量qeqex、吸附能力参数KL和EDS测试结果的综合分析,认为面包酵母菌对各体系中离子的吸附能力大小顺序为:Pb2(单+)(Zn2+-Pb2+)Zn(2单+)。同时认为Pb2+的存在对面包酵母菌吸附Zn2+的行为过程具有强烈抑制作用。     

改性啤酒酵母及柑橘皮凝胶小球对铜的吸附性能

为有效去除污水中的铜离子并实现资源有效的利用,以啤酒酵母和柑橘皮为原料制备海藻酸钙固定啤酒酵母菌小球(SCA)、海藻酸钙固定柑橘皮小球(OPCA)及海藻酸钙固定柑橘皮及啤酒酵母菌复合小球(OPSCA),研究了其对铜离子的吸附和解吸性能。研究结果表明,3种吸附剂对铜离子吸附的最佳pH值为5.0,吸附量的大小顺序为:OPSCAOPCASCA。吸附动力学数据符合准二级动力学模型。吸附过程被内扩散步骤和外扩散步骤共同控制。Langmuir等温吸附模型能较好地模拟3种吸附剂的吸附数据,SCA、OPCA及OPSCA的理论最大吸附量分别为33.49、40.80和61.69 mg/g。3种吸附剂可利用0.1 mol/L的盐酸解吸再生,可循环使用3次以上。     

生物炭固定化解磷菌对Pb2+的吸附特性

以小麦秸秆和活性污泥为原料,在3种温度下热解制备生物炭,使用傅立叶红外光谱(FTIR)和扫描电镜(SEM)对其结构和性能进行表征,探究了以不同生物炭为载体,以解磷菌为固定化菌株制备的固定化微生物对Pb~(2+)的吸附能力,同时研究了吸附时间和热解温度对固定化微生物吸附Pb~(2+)的影响。结果表明:小麦秸秆生物炭较活性污泥生物炭的表面官能团更为丰富,且小麦秸秆生物炭的芳香化程度随热解温度升高而增加;随着热解温度的升高,小麦秸秆生物炭的微孔逐渐发展,孔壁变薄,孔隙结构更为发达;以700℃热解的小麦秸秆生物炭为载体制备的固定化微生物(IBWS700)对Pb~(2+)的吸附量最高,对Pb~(2+)的吸附量可达89.39mg/g;IBWS700对Pb~(2+)的吸附动力学符合准二级动力学方程;IBWS700对Pb~(2+)的吸附可以用Langmuir模型较好地拟合。     

氨基修饰介孔分子筛SBA-15对水中Pb~(2+)吸附性能

以二乙烯三胺基丙基三甲氧基硅烷为偶联剂,利用后修饰方法,制备出氨基修饰SBA-15。利用傅立叶红外光谱仪,N2-吸附脱附对样品结构进行表征,并讨论了吸附动力学特性及吸附等温特性。结果表明,修饰后的SBA-15吸附水中Pb2+时在120 min内可以达到吸附平衡,吸附过程符合拟二阶动力学方程。Langmuir模型及Dubinin-Radushkevich(DR)模型很好地描述了Pb2+在修饰后SBA-15上的吸附行为,其中基于Langmuir模型计算得出的25℃时最大吸附量为84.25 mg/g。D-R模型计算得出的平均吸附自由能在25℃、35℃和45℃时分别为-13.9、-14.4和-16.0 kJ/mol,表明吸附可能属于表面络合作用,可以归为化学过程。     

4种脂肪多胺修饰硅胶对铅离子的吸附

为了合成高效铅离子吸附剂,了解其对铅离子的吸附规律。采用(3-氯丙基)三甲氧基硅烷(CPTS)架桥法,以硅胶(SG)为载体,乙二胺(EDA)、二乙烯三胺(DETA)、三乙烯四胺(TETA)和四乙烯五胺(TEPA)为表面修饰剂,合成了4种胺化硅胶,测定了它们的红外光谱、热重等性质以及对Cu2+、Zn2+和Pb2+的吸附能力。结果表明,4种胺化硅胶对Pb2+的吸附量均大于Cu2+和Zn2+的吸附量,其中DETA修饰硅胶对Pb2+的吸附量较高。4种胺化硅胶对Pb2+的吸附过程较好地符合拟二级动力学模型以及Langmuir和Scatchart等温吸附热力学模型,其对Pb2+吸附的速率常数、饱和吸附量以及吸附位点数由大到小的顺序一致,均为SG-DETASG-TEPASG-EDASG-TETA。4种胺化硅胶对Pb2+的吸附速率和吸附量呈现"奇数胺"增强效应,亲和常数则依次减小。阐明了脂肪多胺修饰硅胶对Pb2+的吸附规律,并进一步讨论了Scatchart和Langmuir热力学模型的统一性。     

非固定化和固定化啤酒酵母对Cd^2＋和Cu^2＋的吸附特性研究

对比了不同吸附剂对重金属的吸附效果,同时研究了啤酒酵母的固定化方法、菌体用量对吸附效果的影响、非同定化和固定化啤酒酵母吸附热力学特性。研究结果表明,非固定化死啤酒酵母对Cd^2＋的单位菌体吸附量是常用吸附剂活性炭的3倍;由1：3的海藻酸钠与碱处理啤酒酵母（w／w）制得的固定化颗粒吸附效果最好;菌体用量的增加会降低单位菌体对重金属的吸附量;啤酒酵母对重金属的吸附位点有限,Cd^2＋的实际最大吸附量为13．95mg／g,Cu^2＋为7．67μg／g。非固定化和固定化啤酒酵母对Cu^2＋和Cd^2＋的等温吸附过程均可用Linear方程、Langmuir方程和Freundlich方程来进行拟合,但非同定化啤酒酵母以Langmuir方程最优,其拟合计算的最大吸附量qmzxCd和qmxxCu分别为13．96mg／g和8．01mg／g;固定化啤酒酵母以Freundlich方程最优,实际最大吸附量Cd为75．41mg／g,Cu为66．58mg／g。     

污泥基活性炭吸附Cu2+的应用研究

以城市污水处理厂剩余污泥为原料,以ZnCl₂为活化剂制取污泥基活性炭。以此污泥基活性炭为吸附剂,对含Cu²⁺的废水进行了吸附实验研究。考察了溶液pH值、Cu²⁺的起始浓度对Cu²⁺离子吸附量的影响;利用等温吸附实验作出吸附等温线,并考察了污泥基活性炭吸附剂吸附Cu²⁺的动力学方程。实验结果表明,污泥基活性炭对Cu²⁺具有良好的吸附性能。吸附的最佳pH值为5;吸附符合Langmuir和Freundlich吸附等温方程,吸附为优惠吸附,吸附量随着吸附质溶液浓度的增加而增大;吸附平衡时间为4 h,吸附动力学符合二级动力学方程。     

Modeling competitive adsorption of molybdate, sulfate, selenate, and selenite using a Freundlich-type multi-component isotherm

This study examined the interactions of MoO4(2-) + SO4(2-), MoO4(2-) + SeO4(2-), and MoO4(2-) + SeO3(2-) systems on gamma-Al2O3 to better understand the competitive adsorption of these anions in the natural environment. The Freundlich isotherms of anionic adsorption onto gamma-Al2O3 in single and binary solutes were also investigated to estimate the competition between these anions. Experimental results indicate that a higher concentration of competitive solute yields a higher efficiency of the competitive solute's prevention of MoO4(2-) adsorption. The most significant result was found in the MoO4(2-) + SeO3(2-) system. The Freundlich isotherm constant (n) increases with the competitive solute concentration. The suitability of a Freundlich-type isotherm, the Sheindorf-Rebuhn-Sheintuch (SRS) equation, and the modified SRS equation in representing the competitive adsorption of MoO4(2-), SO4(2-), SeO4(2-), and SeO3(2-) on gamma-Al2O3 surface, was also examined. Each set of isotherm data was found to conform to linear SRS expressions, allowing competition coefficients to be derived on a concentration basis for each binary-solute system. The competition coefficient aij and relative affinity coefficients alphaij can be seen as a way to quantify competitive interactions. The proposed SRS and modified SRS equations are simple mathematical expressions accounting for competitive interactions of anions present in a mixture for the range of concentrations over which each individual component exhibits Freundlich behavior.     

A comparative study on the biosorption characteristics of some yeasts for Remazol Blue reactive dye

Biosorption capacities and rates of different kinds of dried yeasts (Saccharomyces cerevisiae, Schizosaccharomyces pombe, Kluyveromyces marxianus, Candida sp., C. tropicalis, C. lipolytica, C. utilis, C. quilliermendii and C. membranaefaciens) for Remazol Blue reactive dye from aqueous solutions were compared under laboratory conditions as a function of initial pH and initial dye concentration. Optimum initial biosorption pH was determined as 2 for all the yeasts. All the yeast species showed comparable and very high dye sorption at 100 mg/l initial dye concentration. The equilibrium sorption capacity of the biomass increased with increasing initial dye concentration up to 400 mg/l for Candida sp. C. lipolytica and C. tropicalis; up to 300 mg/l for C. quilliermendii and C. utilis and up to 200 mg/l for S. cerevisiae, S. pombe, K. marxianus and C. membranaefaciens while the adsorption yield of dye showed the opposite trend for all the yeasts. Among the nine yeast species, C. lipolytica exhibited the highest dye uptake capacity (Q(0) = 250 mg/g). Both the Freundlich and Langmuir adsorption models were found suitable for describing the biosorption of the dye by all the Candida yeasts (except C. membranaefaciens). The results indicated that the dye uptake process followed the pseudo-second-order kinetics for each dye-yeast system.     

针铁矿对Pb~(2+)的吸附特征及影响因素研究

通过恒温振荡平衡法研究了Pb~(2+)在针铁矿上的等温吸附和吸附动力学特征,探讨了吸附的影响因素.结果表明:(1)随Pb~(2+)平衡浓度和pH的增大,针铁矿对Pb~(2+)的吸附量逐渐增大.(2)针铁矿对Pb~(2+)的等温吸附可用Freundlich和Langmuir方程较好地拟合.(3)在相同温度和pH下,随离子强度的提高,针铁矿对Pb~(2+)的吸附量增大.(4)在相同离子强度和pH下,针铁矿对Pb~(2+)的吸附量总体随温度升高而增大.针铁矿对Pb~(2+)的吸附是自发进行的吸热反应.(5)针铁矿吸附Pb~(2+)的过程可分为初始的快吸附和随后的慢吸附2个阶段.pH影响吸附反应快慢,随pH增大吸附速率增大;随着pH的增大,达到平衡吸附的时间缩短.吸附动力学方程用Elovich方程拟合最佳.     

Predictions of binary sorption isotherms for the sorption of heavy metals by pine bark using single isotherm data

The adsorption of three heavy metal ions by pine bark was studied. The study was divided into two parts; single component adsorption of the metals Cu2+, Cd2+ and Ni2+ and bisolute adsorption of the three binary systems Cu2+-Cd2+, Cu2+-Ni2+ and Cd2+-Ni2+. Extended Langmuir model, extended Freundlich model. Sips model and ideal adsorption solution theory (IAST) models were used to predict the equilibrium uptake for Cu2+, Cd2+ and Ni2+ in the binary diluted solutions using the single adsorption constants. The experimental data of single isotherm adsorption process were found to follow Langmuir isotherm model with less accuracy than Freundlich and Sips models. Whereas, the predictions of bisolute adsorption isotherms of the mentioned three systems, Cu2+-Cd2+, Cu2+-Ni2+ and Cd2+-Ni2+, showed good agreement with experimental data when using Extended-Langmuir, Extended-Freundlich and IAST. However, the only good fit of the Sips model was with the Cu2+-Cd2+ system.     

Modeling adsorption in multicomponent systems using a Freundlich-type isotherm

The suitability of a Freundlich-type isotherm, the Sheindorf-Rebuhn-Sheintuch (SRS) equation, to represent the competitive adsorption of Sr, Cs and Co in Ca-montmorillonite suspensions was investigated. Experimental adsorption data were obtained for systems containing these cations as single-component, binary and ternary mixtures. The competition coefficient α_ij, which were obtained based on the experimental adsorption data for bicomponent systems, can be viewed as a way to quantify competitive interactions. The competition coefficients obtained for the cations under consideration indicate that their competitive interactions are of similar magnitude, with the cation least affected by competitive effects being Cs, while the adsorption of Co was more significantly affected by the presence of Cs, and Sr by the presence of Co. After α_ij-values were substituted in the SRS equation, the adsorption of systems of three or more components could be predicted. To validate the SRS equation, the adsorption values predicted by this equation for the ternary mixture Sr---Cs--- Co were compared to values determined experimentally. The SRS equation successfully modeled adsorption for the range of concentrations that followed Freundlich behavior.     

荔枝皮对重金属Ni~(2+)的吸附性能

采用批量实验研究了荔枝皮对水中重金属Ni2+吸附的影响因素(如接触时间、pH和吸附剂量)、吸附等温线、吸附动力学和吸附热力学等,并讨论了其吸附机理。结果表明,未改性荔枝皮和改性荔枝皮对Ni2+的吸附平衡时间均为30min;最适pH为6.0~7.0;最佳吸附剂量均为20 g/L。吸附过程均能用Langmuir和Freundlich等温线模型来很好地描述,且均符合假二次动力学模型。改性荔枝皮和未改性荔枝皮对Ni2+的最大比吸附量分别为11.88和5.19 mg/g。此外,热力学研究结果表明,未改性荔枝皮和改性荔枝皮吸附Ni2+均属于非自发的放热过程。     

腐熟污泥对废水中Cd(Ⅱ)与Zn(Ⅱ)的吸附性能研究

利用腐熟污泥作为一种重金属吸附剂,考察其对水中重金属锌和镉的吸附过程.实验数据的拟合采用了Pseudo-first Order-和Pseudo-second Order 2种动力学模型以及Langmuir和Freundlich 2种吸附等温线模型;拟合结果表明,腐熟污泥对锌与镉的吸附过程符合Pseudo-second ...     

污泥基活性炭吸附Cu（2＋）的应用研究

以城市污水处理厂剩余污泥为原料,以ZnCl2为活化剂制取污泥基活性炭。以此污泥基活性炭为吸附剂,对含Cu2＋的废水进行了吸附实验研究。考察了溶液pH值、Cu2＋的起始浓度对Cu2＋离子吸附量的影响;利用等温吸附实验作出吸附等温线,并考察了污泥基活性炭吸附剂吸附Cu2＋的动力学方程。实验结果表明,污泥基活性炭对Cu2＋具有良好的吸附性能。吸附的最佳pH值为5;吸附符合Langmuir和Freundlich吸附等温方程,吸附为优惠吸附,吸附量随着吸附质溶液浓度的增加而增大;吸附平衡时间为4 h,吸附动力学符合二级动力学方程。