A dynamic dilution system for the production of sub-ppb concentrations of reactive and labile species

A three-stage dynamic dilution system has been developed capable of generating calibration standards below 100 pptv using gravimetrically calibrated permeation tubes as a trace species source. Multistage dilution permits the use of equivalent one-step diluent flows approaching 1000 std 1 min ⁻¹. An allfluorocarbon flow path facilitates the handling of reactive and labile species. Accuracies of about ± 3 % have been demonstrated for several sulfur compounds including H₂S and SO₂ at mixing ratios below 200 ppt.     

An evaluation of artifact SO42− formation on nylon filters under field conditions

The extent of SO₂ conversion on Membrana (Ghia) Nylasorb nylon filters under field conditions has been evaluated and found to be quite variable. The S-SO₄²⁻ loading on the nylon filters is higher at higher SO₂ concentrations, and on a long term basis approaches a saturatio limit of 2.5 μg S-SO₄²⁻ on a 47mm disc, at a dosage of 230 μg SO₂ approximately. The % conversion decreases as the SO₂ concentration increases. On a long term basis, at an SO₂ concentration range of 1.0–7.7 μg m⁻³, the conversion ranges from 8.2% to 2.1%. The dependence of SO₂ conversion on nylon filters on relative humidity displays a diurnal pattern. An expression has been derived to explain the observed % SO₂ conversion on nylon filters as a combined effect of the ambient SO₂ concentration and relative humidity.     

Atmospheric oxidation of elemental mercury by ozone in the aqueous phase

The aqueous phase oxidation of elemental mercury by ozone has been investigated in the laboratory using a quartz glass reactor with gas phase concentrations of 400–1800ng m⁻³ and 70–200 ppb for Hg(0) and O₃, respectively. The absorption of Hg in the water phase was increased by three orders of magnitude with O₃ present. If the oxidation were to proceed with the same speed in liquid water in contact with the atmosphere,conversion rales of 1–4% h⁻¹ would be implied. Experiments using ambient urban air with 2–6 ng Hg m⁻³ confirm the process at elevated O₃ concentrations. At ambient O₃ concentrations competitive reactions become important, e.g. O₃ consumption by SO₂, hydrocarbons etc., and even some reduction of Hg²⁺ could occur. The atmospheric oxidation of Hg(0) by O₃ in water is thus considered important at high O₃ levels in regionally polluted or remote areas.     

Studies of potential sources that contributed to atmospheric mercury in Toronto,Canada

This study identified sources of mercury (Hg) in downtown Toronto, Canada by analyzing gaseous elemental mercury (GEM), mercury associated with particles with sizes less than 2.5 microns (PHg < 2.5), and gaseous oxidized inorganic mercury (GOIM), commonly referred to as reactive gaseous mercury (RGM), and air pollutants (CO, NO_x, O₃, PM_2.5, SO₂) concentrations between Dec 2003 and Nov 2004. The data were analyzed using Positive Matrix Factorization (PMF) model, Principal Components Analysis (PCA), ratio analysis, back trajectories, and correlation analyses. The analyses suggest industrial sources (chemical production, metal production, sewage treatment), rather than coal combustion, were the major contributors to measured Hg levels. Overlap in source profiles for the Hg sources listed in the Canadian National Pollutant Release Inventory (NPRI) and lack of source profiles for urban sources were the major limitations to positively identifying sources from the PMF and PCA factors. Correlation analyses revealed direct emissions were the sources of GOIM in spring, summer, and fall, and the occurrence of GEM oxidation by ozone in the summer. Elevated Hg events are attributed to emissions from urban sources near the sampling site, regional point sources, and photochemical processes involving ozone.     

Investigation of Selective Catalytic Reduction Impact on Mercury Speciation under Simulated NOx Emission Control Conditions

Abstract

Selective catalytic reduction (SCR) technology increasingly is being applied for controlling emissions of nitrogen oxides (NO_x) from coal-fired boilers. Some recent field and pilot studies suggest that the operation of SCR could affect the chemical form of mercury (Hg) in coal combustion flue gases. The speciation of Hg is an important factor influencing the control and environmental fate of Hg emissions from coal combustion. The vanadium and titanium oxides, used commonly in the vanadia-titania SCR catalyst for catalytic NO_x reduction, promote the formation of oxidized mercury (Hg²⁺).

The work reported in this paper focuses on the impact of SCR on elemental mercury (Hg⁰) oxidation. Bench-scale experiments were conducted to investigate Hg⁰ oxidation in the presence of simulated coal combustion flue gases and under SCR reaction conditions. Flue gas mixtures with different concentrations of hydrogen chloride (HCl) and sulfur dioxide (SO₂) for simulating the combustion of bituminous coals and subbituminous coals were tested in these experiments. The effects of HCl and SO₂ in the flue gases on Hg⁰ oxidation under SCR reaction conditions were studied. It was observed that HCl is the most critical flue gas component that causes conversion of Hg⁰ to Hg²⁺ under SCR reaction conditions. The importance of HCl for Hg⁰ oxidation found in the present study provides the scientific basis for the apparent coal-type dependence observed for Hg⁰ oxidation occurring across the SCR reactors in the field.     

Simultaneous Sulfur Dioxide and Nitrogen Dioxide Removal by Calcium Hydroxide and Calcium Silicate Solids

ABSTRACT

At conditions typical of a bag filter exposed to a coal-fired flue gas that has been adiabatically cooled with water, calcium hydroxide and calcium silicate solids were exposed to a dilute, humidified gas stream of nitrogen dioxide (NO₂) and sulfur dioxide (SO₂) in a packed-bed reactor. A prior study found that NO₂ reacted readily with surface water of alkaline and non-alkaline solids to produce nitrate, nitrite, and nitric oxide (NO). With SO₂ present in the gas stream, NO₂ also reacted with S(IV), a product of SO₂ removal, on the exterior of an alkaline solid. The oxidation of S(IV) to S(VI) by oxygen reduced the availability of S(IV) and lowered removal of NO₂. Subsequent acidification of the sorbent by the removal of NO₂ and SO₂ facilitated the production of NO. However, the conversion of nitrous acid to sulfur-nitrogen compounds reduced NO production and enhanced SO₂ removal. A reactor model based on empirical and semi-empirical rate expressions predicted rates of SO₂ removal, NO₂ removal, and NO production by calcium silicate solids. Rate expressions from the reactor model were inserted into a second program, which predicted the removal of SO₂ and NO_x by a continuous process, such as the collection of alkaline solids in a baghouse. The continuous process model, depending upon inlet conditions, predicted 30-40% removal for NO and 50-90% removal for SO₂. These x 2 results are relevant to dry scrubbing technology for combined SO₂ and NO_x removal that first oxidizes NO to NO₂ by the addition of methanol into the flue duct.     

Influence of ship emissions on air quality and input of contaminants in southern Alaska National Parks and Wilderness Areas during the 2006 tourist season

The impact of ship emissions on air quality in Alaska National Parks and Wilderness Areas was investigated using the Weather Research and Forecasting model inline coupled with chemistry (WRF/Chem). The visibility and deposition of atmospheric contaminants was analyzed for the length of the 2006 tourist season. WRF/Chem reproduced the meteorological situation well. It seems to have captured the temporal behavior of aerosol concentrations when compared with the few data available. Air quality follows certain predetermined patterns associated with local meteorological conditions and ship emissions. Ship emissions have maximum impacts in Prince William Sound where topography and decaying lows trap pollutants. Along sea-lanes and adjacent coastal areas, NO_x, SO₂, O₃, PAN, HNO₃, and PM_2.5 increase up to 650 pptv, 325 pptv, 900 pptv, 18 pptv, 10 pptv, and 100 ng m^?3. Some of these increases are significant (95% confidence). Enhanced particulate matter concentrations from ship emissions reduce visibility up to 30% in Prince William Sound and 5–25% along sea-lanes.     

Effects of Sulfur Dioxide and Nitric Oxide on Mercury Oxidation and Reduction under Homogeneous Conditions

Abstract

This paper is particularly related to elemental mercury (Hg⁰) oxidation and divalent mercury (Hg²⁺) reduction under simulated flue gas conditions in the presence of nitric oxide (NO) and sulfur dioxide (SO₂). As a powerful oxidant and chlorinating reagent, Cl₂ has the potential for Hg oxidation. However, the detailed mechanism for the interactions, especially among chlorine (Cl)-containing species, SO₂, NO, as well as H₂O, remains ambiguous. Research described in this paper therefore focused on the impacts of SO₂ and NO on Hg⁰ oxidation and Hg²⁺ reduction with the intent of unraveling unrecognized interactions among Cl species, SO₂, and NO most importantly in the presence of H₂O. The experimental results demonstrated that SO₂ and NO had pronounced inhibitory effects on Hg⁰ oxidation at high temperatures when H₂O was also present in the gas blend. Such a demonstration was further confirmed by the reduction of Hg²⁺ back into its elemental form. Data revealed that SO₂ and NO were capable of promoting homogeneous reduction of Hg²⁺ to Hg⁰ with H₂O being present. However, the above inhibition or promotion disappeared under homogeneous conditions when H₂O was removed from the gas blend.     

Retention of sulfur dioxide by nylon filters

Based on laboratory studies, recovery efficiencies of sulfur dioxide (SO₂) were determined for nylon filters. The nylon filters used in these experiments were found to retain SO₂. A relatively uniform amount (1.7%) was recoverable from each nylon filter, independent of relative humidity. An appreciable portion of SO₂ was unrecoverable, and this increased from 5 to 16% as the RH increased from 28 to 49%. This unrecoverable SO₂ may account for previous reports of a low bias for SO₂ determinations employing filter packs using nylon filters. Additional characterization of nylon filters is recommended prior to their future deployment as an integrative sampling medium for ambient air.     

湿式烟气脱硫系统同时脱汞研究

研究表明,湿法烟气脱硫装置(WFGD)可去除烟气中绝大部分Hg²⁺,但对单质汞的吸收效果不明显,因此研究提高湿法烟气脱硫系统中单质汞的氧化率的方法对控制汞的排放具有重要意义。综述了WFGD及在此系统中各种添加剂的脱汞性能,认为在添加剂中,气态的臭氧、液态的次氯酸和氯化钠稀溶液、 黄磷乳浊液、氢硫化钠溶液及EDTA的汞去除效果较好,且不会被SO₂大量消耗,可在WFGD系统实现同时脱硫脱汞;而气态的氯气,液态的K₂S₂O₈溶液虽然也有较好的汞去除效果,但因易被SO₂或亚硫酸盐溶液消耗,当在WFGD系统中用其氧化单质汞时,需要对脱硫塔进行分层或其他改造,使烟气中的SO₂被吸收后再控制汞,提高经济性。     

Performance Characterization and Optimization of the AgNO3-Filter/FMA Fluorimetric Method for Atmospheric H2S Measurements

This sensitive, albeit precarious, method for measuring ppb-ppt (V/V) concentrations of H₂S was examined for various sources of potential error within the procedure. Filter preparation, filter storage, filter extraction, fluorimetric reagent stabilities, matrix differences between standards and samples, and possible interferences from other sulfur-containing compounds were separately studied for their effects on the analytical performance of the method. The overall method showed no Interference from SO₂, CS₂, COS, CH₃SH, CH₃SCH₃, and SO₄ ^-2. To minimize bias and obtain a reliable estimate of precision, the method should be calibrated with H₂S standards rather than liquid bisulfide standards. The measurement precision is a function of the quantity of H₂S collected as Ag₂S and/or AgSH on the impregnated filters. Because of the method’s linear dynamic range, sufficient air should be sampled to achieve filter loadings of 15 to 35 ng S/filter. A quality control method based on fluorescein mercuric acetate (FMA) is presented that ensures data quality while reducing the otherwise frequent need for fluori-metric calibration.     

Predicting Extents of Mercury Oxidation in Coal-Derived Flue Gases

Abstract

The proposed mercury (Hg) oxidation mechanism consists of a 168-step gas phase mechanism that accounts for interaction among all important flue gas species and a heterogeneous oxidation mechanism on unburned carbon (UBC) particles, similar to established chemistry for dioxin production under comparable conditions. The mechanism was incorporated into a gas cleaning system simulator to predict the proportions of elemental and oxidized Hg species in the flue gases, given relevant coal properties (C/H/O/N/S/Cl/Hg), flue gas composition (O₂, H₂O, HCl), emissions (NO_X, SO_X, CO), the recovery of fly ash, fly ash loss-on-ignition (LOI), and a thermal history. Predictions are validated without parameter adjustments against datasets from lab-scale and from pilot-scale coal furnaces at 1 and 29 MW_t. Collectively, the evaluations cover 16 coals representing ranks from sub-bituminous through high-volatile bituminous, including cases with Cl₂ and CaCl₂ injection. The predictions are, therefore, validated over virtually the entire domain of Cl-species concentrations and UBC levels of commercial interest. Additional predictions identify the most important operating conditions in the furnace and gas cleaning system, including stoichiometric ratio, NO_X, LOI, and residence time, as well as the most important coal properties, including coal-Cl.     

The retention of SO2 by nylon filters

The retention of SO₂ by nylon filters was determined in laboratory and field studies. Less than 4% of the SO₂ was retained by nylon filters manufactured before May 1984. A change in filter material at that time appears to have greatly increased the retention of SO₂ to values as high as 70%. Therefore, the SO₂ retention by a nylon filter preceding an SO₂ collection filter must be taken into account. Some organic sulfur compounds may also be retained on nylon filters.     

Pilot-Scale Study of the Effect of Selective Catalytic Reduction Catalyst on Mercury Speciation in Illinois and Powder River Basin Coal Combustion Flue Gases

Abstract

A study was conducted to investigate the effect of selective catalytic reduction (SCR) catalyst on mercury (Hg) speciation in bituminous and subbituminous coal combustion flue gases. Three different Illinois Basin bituminous coals (from high to low sulfur [S] and chlorine [Cl]) and one Powder River Basin (PRB) subbituminous coal with very low S and very low Cl were tested in a pilot-scale combustor equipped with an SCR reactor for controlling nitrogen oxides (NO_x) emissions. The SCR catalyst induced high oxidation of elemental Hg (Hg⁰), decreasing the percentage of Hg⁰ at the outlet of the SCR to values <12% for the three Illinois coal tests. The PRB coal test indicated a low oxidation of Hg⁰ by the SCR catalyst, with the percentage of Hg⁰ decreasing from ～96% at the inlet of the reactor to ～80% at the outlet. The low Cl content of the PRB coal and corresponding low level of available flue gas Cl species were believed to be responsible for low SCR Hg oxidation for this coal type. The test results indicated a strong effect of coal type on the extent of Hg oxidation.     

Linkage between community diversity of sulfate-reducing microorganisms and methylmercury concentration in paddy soil

Sulfate-reducing microorganisms (SRM) have been thought to play a key role in mercury (Hg) methylation in anoxic environments. The current study examined the linkage between SRM abundance and diversity and contents of methylmercury (MeHg) in paddy soils collected from a historical Hg mining area in China. Soil profile samples were collected from four sites over a distance gradient downstream the Hg mining operation. Results showed that MeHg content in the soil of each site significantly decreased with the extending distance away from Hg mine. Soil MeHg content was correlated positively with abundance of SRM and the contents of organic matter (OM), NH₄ ⁺, SO₄ ^2?, and Hg. The abundances of SRM based on dissimilatory (bi) sulfite reductase (dsrAB) gene at 0–40 cm depths were higher than those at 40–80 cm depth at all sites. The SRM community composition varied in the soils of different sampling sites following terminal restriction fragment length polymorphism (T-RFLP) and phylogenetic analyses, which appeared to be correlated with contents of MeHg, OM, NH₄ ⁺, and SO₄ ^2? through canonical correspondence analysis. The dominant groups of SRM in the soils examined belonged to Deltaproteobacteria and some unknown SRM clusters that could have potential for Hg methylation. These results advance our understanding of the relationship between SRM and methylmercury concentration in paddy soil.     

Influence of ozone, relative humidity, and flow rate on the deposition and oxidation of sulfur dioxide on yellow sand

To evaluate the influences of O₃, relative humidity (RH), and flow rate on the reaction between yellow sand and SO₂, the SO₂ deposition velocity and the oxidation state of sulfur were investigated by means of exposure experiments in a cylindrical flow reactor. Early in the reaction, the deposition velocity was not influenced by the RH or the presence of O₃; as the reaction progressed, however, the deposition velocity increased in the presence of O₃ and at high humidity. The oxidation of sulfur from S(IV) to S(VI) was also enhanced under these conditions. The amount of sulfur oxidation was positively correlated with the amount of deposited O₃. Furthermore, the SO₂ deposition velocity increased with increasing flow rate. However, changes in the flow rate had no noticeable effect on the amount of SO₂ oxidation.     

Direct measurement of NO2 in the marine atmosphere by laser-induced fluorescence technique

A simple and compact instrument for NO₂ measurement by laser-induced fluorescence (LIF) technique with a pulsed solid state laser and a multi-pass excitation system was developed and optimized for several conditions. As a result of laboratory experiment, the limit of detection (LOD) reached 94 pptv for 60 s integration. It was thought that an LIF instrument with this LOD value would be capable of quantifying sub-ppbv NO₂ in unpolluted marine atmosphere. As the second step, a field test of the instrument was conducted in the marine atmosphere at Cape Hedo, Okinawa Island, Japan, in summer 1999. Intercomparison between the LIF instrument and a chemiluminescence detector with a photolytic converter (PLC-CL) was also made in this test. Consequently, the LIF instrument was shown to be of practical use for measuring NO₂ in clean maritime air.     

用于气态零价汞转化的催化剂研究

零价汞的高效去除是燃煤烟气汞污染控制过程中的关键环节。为了促进烟气中的零价汞转化为易于去除的氧化态汞,分别考察了在有HCl存在时,几种过渡金属氧化物(Cu、Fe、Mn、Co和Zr)对零价汞氧化的催化作用,以筛选出性能较好的催化组分;为提高催化剂的抗SO2性能,分别尝试了利用几种金属元素(Sr、Ce、W和Mo)对催化剂进行掺杂改性的方法。结果表明,锰氧化物的催化作用最好,其最佳使用温度在573 K左右;SO2对零价汞的催化氧化有明显抑制作用,在无SO2及1 400 mg/m3SO2时锰催化剂对零价汞催化氧化效率分别为93%和78%。而Mo改性的锰氧化物催化剂的抗硫性能大幅提高,在1 400 mg/m3SO2存在的情况下其对零价汞的催化氧化效率可达到90%以上,较其他改性元素高。     

Ultra-high adsorption of Hg0 using impregnated activated carbon by selenium

Activated carbon was one of the main adsorptions utilized in elemental mercury (Hg⁰) removal from coal combustion flue gas. However, the high cost and low physical adsorption efficiency of activated carbon injection (ACI) limited its application. In this study, an ultra-high efficiency (nearly 100%) catalyst sorbent-Se_x/Activated carbon (Se_x/AC) was synthesized and applied to remove Hg⁰ in the simulated flue gas, which exhibited 120 times outstanding adsorption performance versus the conventional activated carbon. The Se_x/AC reached 17.98 mg/g Hg⁰ adsorption capacity at 160 °C under the pure nitrogen atmosphere. Moreover, it maintained an excellent mercury adsorption tolerance, reaching the efficiency of Hg⁰ removal above 85% at the NO and SO₂ conditions in a bench-scale fixed-bed reactor. Characterized by the multiple methods, including BET, XRD, XPS, kinetic and thermodynamic analysis, and the DFT calculation, we demonstrated that the ultrahigh mercury removal performance originated from the activated Se species in Se_x/AC. Chemical adsorption plays a dominant role in Hg⁰ removal: Selenium anchored on the surface of AC would capture Hg⁰ in the flue gas to form an extremely stable substance-HgSe, avoiding subsequent Hg⁰ released. Additionally, the oxygen-containing functional groups in AC and the higher BET areas promote the conversion of Hg⁰ to HgO. This work provided a novel and highly efficient carbon-based sorbent -Se_x/AC to capture the mercury in coal combustion flue gas.

Selenium-modified porous activated carbon and the interface functional group promotes the synergistic effect of physical adsorption and chemical adsorption to promote the adsorption capacity of Hg⁰.

     

A continuous monitor-sulfur chemiluminescence detector (CM-SCD) system for the measurement of total gaseous sulfur species in air

A continuous monitor-sulfur chemiluminescence detector (CM-SCD) system with a flameless, temperature-controlled furnace combustion source was developed for real-time measurement of total sulfur gases in air. This measurement system demonstrated a linear dynamic range exceeding five orders of magnitude and equimolar sensitivity to the most prevalent atmospheric sulfur gases. A detection limit of 10 pptv was obtained using 10 min signal averages. On a real-time basis, detection in the 20–50 pptv range was demonstrated. After modification of its sample inlet system, the CM-SCD showed no appreciable interference effects from the addition of H₂O vapor, NO₂ or O₃ to the sample matrix. In the recent Gas-Phase Sulfur Intercomparison Experiment (GASIE), the CM-SCD compared favorably with SO₂ measurement methods.