垃圾焚烧飞灰中的重金属污染物处理方法

随着垃圾焚烧技术在各个城市生活垃圾处理中的广泛应用,对生活垃圾焚烧的残余物,主要是飞灰的处理、处置,已成为困扰人们生产生活的重要难题之一。飞灰的处理是控制重金属污染的关键,目前处理垃圾焚烧飞灰中重金属污染物的常用方法有：水泥固化法、化学药剂稳定法、飞灰热处理、化学浸提法等,生物淋滤法是近年新兴起来的金属浸提技术。经处理后的飞灰可进行填埋或资源化利用。因此,着重叙述了当前有关垃圾焚烧飞灰中重金属污染的控制方法与处置技术的研究现状。     

城市生活垃圾并流竖炉焚烧模拟实验研究

气化熔融焚烧技术能够避免重金属和二恶英的二次污染,被公认为实现零排放和环境友好型的焚烧方法。在这样的背景下提出了生活垃圾并流竖炉气化熔融焚烧工艺。该工艺以竖炉为气化熔融主体设备,垃圾料层与助燃空气在炉内都是至上而下并流流动,从而使垃圾热解气化产生的可燃气体在竖炉下部完全燃烧,以提供灰渣熔融耗热。并流竖炉热态模拟试验表明,并流时垃圾料层中各点的温度明显高于逆流情况,并流时产生的CO₂量明显高于逆流情况。因此说并流竖炉更适合气化熔融焚烧工艺的要求。     

Stabilization of APC Residues from Waste Incineration with Ferrous Sulfate on a Semi-Industrial Scale

Abstract

A stabilization method for air pollution control (APC) residues from municipal solid waste incineration (MSWI) involving mixing of the residue with water and FeSO₄ has been demonstrated on a semi-industrial scale on three types of APC residues: a semidry (SD) APC residue, a fly ash (FA), and an FA mixed with sludge (FAS) from a wet flue gas cleaning system. The process was performed in batches of 165-175 kg residue. It generates a wastewater that is highly saline but has a low content of heavy metals such as Cd, Cr, and Pb. The stabilized and raw residues have been subject to a range of leaching tests: the batch leaching test, the pH-static leaching test, the availability test, and the column test. These tests showed that the stabilized residues have remarkably improved leaching properties, especially with respect to Pb but also with respect to Cd, Cu, and Zn. The release of Pb was reduced by a factor of 250-36,000.     

Obtaining a Part B Permit for Hazardous Waste Incineration

The objectives of this study were to compare changes in atmospheric deposition rates for water soluble Zn, Cu and Mn associated with a doubling of the generating capacity of a fossilfuel power plant located in southern Maryland with concentrations of extractable metals in soils and In corn and soybean foliage.

Three atmospheric deposition samples were collected monthly during each summer from 12 research and monitoring sites located 1.6, 4.8 and 9.6 km distances from the Chalk Point Generating Station for two years before and after the June 1975 expansion of generation capacity from 660 to 1320 MW. Crop leaf samples were collected at flowering, and 0-15 cm depth soil samples were collected from research plots each May.

Averaged over monitoring sites and plant operational periods, respectively, significant decreases were found in atmospheric deposition rates for Zn and Mn from pre- to post-plant expansion and with increased distances. The Cu deposition rates remained unchanged from pre- to post-expansion; however, a trend for decreased rates with distance was observed.

Significant differences were found in the levels of soil extractable Zn, Cu and Mn among the 12 sites and with distance from the power plant. Also, combined over sites, significantly higher levels of extractable Zn and Mn were found during post-expansion which were attributed to general increases in soil acidity found in all soil research sites.

Significant increases in foliar Cu and significant decreases in foliar Mn concentrations were found in both crops from pre- to post-expansion. Leaf Zn concentrations declined in soybeans but remained unchanged in corn after plant expansion. Leaf Mn levels were highest in both crops at 1.6 km compared to more distance sites; however, foliar Zn and Cu concentrations In both crops were similar across distances from the power plant.

The increase in soil extractable Zn and Mn associated with the decreases in soil pH were typically 100X larger than the recorded decreases in water soluble Zn and Mn deposition associated with power plant expansion. The observed changes in rates of metal deposition would be expected to have only minimal effects on the metal nutrition of the crops; however, the quantities of Zn and Cu being deposited would likely prevent deficiencies from occurring on the Atlantic Coastal Plain soils.     

Potential Problems with the Current RCRA Incineration Permit Process

The current hazardous waste incinerator permitting process is highly uncertain, complex, and unnecessarily restrictive, which makes a permitted facility very difficult to operate on a continuous basis without permit violations. This paper discusses the problems in the current regulation and enforcement practices. Some solutions are suggested. It is suggested that the current highly conservative permitting approach of disallowing any operating conditions or banning any waste feeds which the permit writer may have the slightest doubt of failing to meet the four-9s destruction and removal efficiency (DRE) requirement for even a few seconds, should be reevaluated. It is suggested that a more reasonable approach, using practical engineering judgment to allow those operating conditions and waste feeds which should be able to meet the DRE requirement, should be considered by the regulatory agencies.     

Urea as a PCDD/F Inhibitor in Municipal Waste Incineration

ABSTRACT

Emissions of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) from municipal waste incineration have been widely studied because of their extensive toxicity, and many efforts have been made to restrict their emissions. Although a number of chemical compounds have been shown in laboratory-scale tests to inhibit the formation of PCDD/Fs, few have been tested in pilot- or full-scale plants. This work evaluates the effect of urea as a PCDD/F inhibitor in a pilot-scale incinerator that uses refuse-derived fuel (RDF). The decomposition of urea under the test conditions was also studied using detailed kinetic modeling. An aqueous solution of urea was injected into the flue gas stream after the furnace at ~730 °C, with varied urea concentrations and flue gas residence times used between the furnace and the sampling point. The results demonstrate that urea can successfully inhibit PCDD/F formation in waste incineration if concentrations and injection points are properly adjusted. The kinetic model showed that urea can be rapidly decomposed under appropriate flue gas conditions, indicating that in addition to the urea molecule itself, decomposition products of urea can also be responsible for the reduction of PCDD/F production during incineration.     

Incineration of Paper Sludge in a Prototype Vortexing Fluidized Bed Combustor

ABSTRACT

All experiments were carried out in a prototype vortexing fluidized bed combustor (VFBC). The dimension of the combustion chamber is 0.7 x 1.4 x 2 m, and the freeboard section is 1 m i.d. and 4 m in height. Paper sludge was used as the feeding material. Two types of coal particles were employed as the supplementary fuel. In order to understand the characteristics of the VFBC system for paper sludge incineration, the effect of various operating parameters, such as the primary airflow, excess air ratio, and secondary airflow rates, on temperature distribution, ash elutriation, combustion efficiency, and pollutant emissions were investigated.     

The Capture of Heavy Metals from Incineration Using a Spray Dryer Integrated with a Fabric Filter Using Various Additives

ABSTRACT

This study investigated the effects of feedstock additives [polyvinyl chloride (PVC) and NaCl] and spray dryer additives (SiO₂, CaCl₂, NaHCO₃) on heavy metal and fly ash removal efficiencies, and on particle size distribution of heavy metals. A spray dryer with an integrated fabric filter was used as an air pollution control device (APCD). Removal efficiencies for fly ash and heavy metals were greater than 95 and 90%, respectively. When additives of PVC or NaCl were used, the concentration of heavy metals distributed in fly ash apparently varied when the particle diameter was <1 μm. Although the effects of the additives SiO₂, CaCl₂, and NaHCO₃ on the elemental size distribution of Cr were insignificant, these additives did slightly increase concentrations of Cd, Zn, and Pb partitioning in coarser particles (>1μm).     

Incineration of paper sludge in a prototype vortexing fluidized bed combustor

All experiments were carried out in a prototype vortexing fluidized bed combustor (VFBC). The dimension of the combustion chamber is 0.7 x 1.4 x 2 m, and the freeboard section is 1 m i.d. and 4 m in height. Paper sludge was used as the feeding material. Two types of coal particles were employed as the supplementary fuel. In order to understand the characteristics of the VFBC system for paper sludge incineration, the effect of various operating parameters, such as the primary airflow, excess air ratio, and secondary airflow rates, on temperature distribution, ash elutriation, combustion efficiency, and pollutant emissions were investigated.     

COVID-19 and municipal solid waste (MSW) management: a review

Environmental Science and Pollution Research - Municipal solid waste (MSW) represents an inevitable by-product of human activity and a major crisis for communities across the globe. In recent...     

Electrostatic Precipitation Tests with Fuel Oil Ash

The main characteristics of the electrostatic collection of fuel oil ash has been investigated at a pilot precipitator installed in a laboratory rig. The relationship between collection efficiency, dust concentration and air velocity is studied and the influence of the spacing between the collection plates on both efficiency and effective migration velocity is discussed. Emphasis is put on the high degrees of efficiency attainable under suitable operating conditions.     

Combined PCDD/F Destruction and Particulate Control in a Baghouse: Experience with a Catalytic Filter System at a Medical Waste Incineration Plant

ABSTRACT

Phoenix Services, Inc., owns and operates the Baltimore Regional Medical Waste Incinerator in Baltimore, MD. New regulations for dioxins and furans imposed a limit that was considerably below historical emission levels. To determine a method to comply with the new dioxin/furan regulations, Phoenix Services performed trials with powdered activated carbon (PAC). Although the results with carbon were acceptable, Phoenix Services decided to replace their woven fiberglass filter bags with catalytic filters that simultaneously destroy dioxins and furans and collect particulate matter (PM). The catalytic filter system offered several advantages to Phoenix Services, including destruction of dioxins and furans instead of adsorption on carbon. The catalytic filters also offered a passive solution that did not require new carbon injection equipment. In January 2000, a campaign to measure dioxins/furans and PM was undertaken.     

Life cycle and economic assessment of source-separated MSW collection with regard to greenhouse gas emissions: a case study in China

In China, the continuously increasing amount of municipal solid waste (MSW) has resulted in an urgent need for changing the current municipal solid waste management (MSWM) system based on mixed collection. A pilot program focusing on source-separated MSW collection was thus launched (2010) in Hangzhou, China, to lessen the related environmental loads. And greenhouse gas (GHG) emissions (Kyoto Protocol) are singled out in particular. This paper uses life cycle assessment modeling to evaluate the potential environmental improvement with regard to GHG emissions. The pre-existing MSWM system is assessed as baseline, while the source separation scenario is compared internally. Results show that 23 % GHG emissions can be decreased by source-separated collection compared with the base scenario. In addition, the use of composting and anaerobic digestion (AD) is suggested for further optimizing the management of food waste. 260.79, 82.21, and ?86.21 thousand tonnes of GHG emissions are emitted from food waste landfill, composting, and AD, respectively, proving the emission reduction potential brought by advanced food waste treatment technologies. Realizing the fact, a modified MSWM system is proposed by taking AD as food waste substitution option, with additional 44 % GHG emissions saved than current source separation scenario. Moreover, a preliminary economic assessment is implemented. It is demonstrated that both source separation scenarios have a good cost reduction potential than mixed collection, with the proposed new system the most cost-effective one.     

PCDD/F mass balance in the flue gas cleaning units of a MSW incineration plant

With the main purpose of evaluating PCDD/F presence and the corresponding mass balance over the emissions control system, an extensive study was performed on a municipal solid waste full scale incinerator equipped with a best available technology flue gas treatment line. Present paper reports the main results obtained, with particular reference to the PCDD/F concentration profiles and mass balances derived for every process unit of the flue gas control system. Total release evaluated for the plant is also outlined compared with data on PCDD/F content of raw waste and with reference values included in most recent guidelines.     

The flux and mass balance of PCDD/F in a MSW incineration full scale plant

PCDD/F are one of the most significant environmental concerns of municipal solid waste disposal through incineration processes. With the main purpose of evaluating their presence along the flue gas line and establishing a mass balance over the whole system, an extensive research study was performed on a full scale plant. Present paper reports the main results obtained, with particular reference to the PCDD/F concentration profiles and mass balance in the post-furnace region. where significant formation of these compounds might take place. PCDD/F mass fluxes evaluated in all the residues arising from the process are also reported.     

Characterization of Municipal Solid Waste Incineration Residues From Facilities with Different Air Pollution Control Systems

Abstract

Municipal Solid Waste incinerator residues produced in two types of facilities were exhaustively characterized: granulometry, mineralogy, chemical composition, leaching behavior, and elemental distribution as a function of particle size. Air Pollution Control (APC) residues coming from a semi-dry scrubber have shown higher solubility than fly ashes originating in an Electrostatic Precipitator (ESP), as well as higher contents in volatile metals (Cd, Hg). Different metal speciation and distribution as a function of particle size have been found in fly ashes (ESP residues) and APC residues. In APC residues, heavy metals (with the exception of Hg) show a parabolic distribution with maxima in the smallest and largest particles, following the same profile as soluble salts. Metal distribution for APC residues exhibits that metals generally are not associated with silicate aluminate matrix. Results show the effect of adding lime to APC residues in metal speciation and distribution.     

水热法外加硅铝添加剂稳定垃圾焚烧飞灰中的重金属

研究了在碱性水热条件下添加粉煤灰、膨润土、高岭土等以提供硅铝元素稳定生活垃圾焚烧飞灰中的重金属。实验结果表明,水热反应中添加粉煤灰、膨润土合成了雪硅钙石和水钙铝榴石,添加高岭土合成了雪硅钙石和加藤石。水热反应中添加粉煤灰、膨润土、高岭土对降低飞灰中Pb、Zn等重金属的浸出毒性均具有显著效果,水热产物中Pb、Zn和Cu的浸出浓度与飞灰相比分别降低了87%~96%、87%~94%和57%~78%。硅铝添加剂还能抑制飞灰中Pb、Zn等在碱性水热条件下向液相的转移,使重金属稳定在固相中。     

Response surface models for the formation of PCDD and PCDF in a pilot plant combustion of MSW

Experimental data on PCDD and PCDF emissions in raw gases from municipal solid waste combustion in a pilot plant were processed by Response Surface models to gain information on process parameter values which minimize both the total PCDD/PCDF concentrations and those of a selected congener group.