Exposure to major volatile organic compounds and carbonyls in European indoor environments and associated health risk

This paper summarizes recent data on the occurrence of major organic compounds (benzene, toluene, xylenes, styrene, acetaldehyde, formaldehyde, naphthalene, limonene, α-pinene and ammonia, classified by the European Commission's INDEX strategy report as the priority pollutants to be regulated) and evaluates accordingly cancer and non-cancer risks posed by indoor exposure in dwellings and public buildings in European Union (EU) countries. The review process indicated that significant differences in indoor air quality exist within and among the countries where data were available, indicating corresponding differences in sources and emission strength of airborne chemicals, identified or not. Conservative exposure limits were not exceeded for non-carcinogenic effects, except for formaldehyde; for carcinogenic agents the estimated risks were up to three orders of magnitude higher than the one (10(-6)) proposed as acceptable by risk management bodies. However, the risk assessment evaluation process faces crucial difficulties, either due to the relative paucity of indoor air quality measurements in many EU countries, or by the lack of sampling consistency in the already existing studies, indicating the need for additional measurements of indoor air quality following a harmonized sampling and analytical protocol. Additionally, uncertainties embodied in the cancer potency factors and exposure limit values impose further difficulties in substance prioritization and risk management.     

Estimation of age-related vulnerability to air pollution: assessment of respiratory health at local scale

This paper demonstrates association of short-term variation in pollution and health outcomes within the same geographical area for a typical urban setting in the northern part of the UK from time series analysis. It utilises publicly available datasets for regulated air pollutants (PM??, NO?, SO?, CO and O?), meteorology and respiratory hospital admissions (and mortality) between April 2002 and December 2005 to estimate the respiratory health effect of pollution exposure, mainly in the elderly. Our results show that PM?? and O? are positively associated with respiratory hospital admissions in the elderly, specifically in the age group 70-79. CO effects seem to be concentrated on the most elderly age group (80+) whereas NO? seems to have the opposite age-related effect, with lower effects on the more elderly.     

Volatile organic compounds concentrations in residential indoor and outdoor and its personal exposure in Korea

To date, personal volatile organic compounds (VOCs) exposure and residential indoor and outdoor VOCs levels have not been characterized in Korea. In this study, residential indoor and outdoor VOCs concentrations were measured and compared simultaneously with the personal exposure for each of 30 participants in a medium city, Asan, and in a metropolitan city, Seoul. Factors that influence personal VOCs exposures were assessed in relation to house characteristics and time activity information. All VOC concentrations were measured using passive samplers during a 24-h period and analyzed using GC-MS. Ten target VOCs were benzene, trichloroethylene, toluene, o-xylene, p-xylene, ethylbenzene, MIBK, n-octane, styrene, and 1,2-dichlorobenzene. Residential indoor and outdoor VOCs concentrations measured in Seoul were significantly higher than those in Asan. Indoor/outdoor (I/O) ratios for all target compounds ranged from 0.94 to 1.51 and I/O ratios of Asan were a little higher than those of Seoul. Results indicate that time activity information can be used to predict personal exposures, although such predictions will result in an over estimation compared to measured exposures. Factors which influence the indoor VOCs level and its personal exposure in relation to house characteristics included house age, indoor smoking, and house type.     

Understanding the fate and transport of petroleum hydrocarbons from coal tar within gasholders

Coal tars have been identified as posing a threat to human health due to their toxic, mutagenic and carcinogenic characteristics. Workers involved in former gasholders decommissioning are potentially exposed to relevant concentrations of volatile and semi-volatile hydrocarbons upon opening up derelict tanks and during tar excavation/removal. While information on contaminated sites air-quality and its implications on medium-long term exposure is available, acute exposure issues associated with the execution of critical tasks are less understood. Calculations indicated that the concentration of a given contaminant in the gasholder vapour phase only depends on the coal tar composition, being only barely affected by the presence of water in the gasholder and the tar volume/void space ratio. Fugacity modelling suggested that risk-critical compounds such as benzene, naphthalene and other monocyclic and polycyclic aromatic hydrocarbons may gather in the gasholder air phase at significant concentrations. Gasholder emissions were measured on-site and compared with the workplace exposure limits (WELs) currently in use in UK. While levels for most of the toxic compounds were far lower than WELs, benzene air-concentrations where found to be above the accepted threshold. In addition due to the long exposure periods involved in gasholder decommissioning and the significant contribution given by naphthalene to the total coal tar vapour concentration, the adoption of a WEL for naphthalene may need to be considered to support operators in preventing human health risk at the workplace. The Level I fugacity approach used in this study demonstrated its suitability for applications to sealed environments such as gasholders and its further refining could provide a useful tool for land remediation risk assessors.     

Cancer risk assessment of selected hazardous air pollutants in Seattle

The risk estimates calculated from the conventional risk assessment method usually are compound specific and provide limited information for source-specific air quality control. We used a risk apportionment approach, which is a combination of receptor modeling and risk assessment, to estimate source-specific lifetime excess cancer risks of selected hazardous air pollutants. We analyzed the speciated PM(2.5) and VOCs data collected at the Beacon Hill in Seattle, WA between 2000 and 2004 with the Multilinear Engine to first quantify source contributions to the mixture of hazardous air pollutants (HAPs) in terms of mass concentrations. The cancer risk from exposure to each source was then calculated as the sum of all available species' cancer risks in the source feature. We also adopted the bootstrapping technique for the uncertainty analysis. The results showed that the overall cancer risk was 6.09 x 10(-5), with the background (1.61 x 10(-5)), diesel (9.82 x 10(-6)) and wood burning (9.45 x 10(-6)) sources being the primary risk sources. The PM(2.5) mass concentration contributed 20% of the total risk. The 5th percentile of the risk estimates of all sources other than marine and soil were higher than 110(-6). It was also found that the diesel and wood burning sources presented similar cancer risks although the diesel exhaust contributed less to the PM(2.5) mass concentration than the wood burning. This highlights the additional value from such a risk apportionment approach that could be utilized for prioritizing control strategies to reduce the highest population health risks from exposure to HAPs.     

Impact of climate change on the domestic indoor environment and associated health risks in the UK

There is growing evidence that projected climate change has the potential to significantly affect public health. In the UK, much of this impact is likely to arise by amplifying existing risks related to heat exposure, flooding, and chemical and biological contamination in buildings. Identifying the health effects of climate change on the indoor environment, and risks and opportunities related to climate change adaptation and mitigation, can help protect public health.We explored a range of health risks in the domestic indoor environment related to climate change, as well as the potential health benefits and unintended harmful effects of climate change mitigation and adaptation policies in the UK housing sector. We reviewed relevant scientific literature, focusing on housing-related health effects in the UK likely to arise through either direct or indirect mechanisms of climate change or mitigation and adaptation measures in the built environment. We considered the following categories of effect: (i) indoor temperatures, (ii) indoor air quality, (iii) indoor allergens and infections, and (iv) flood damage and water contamination.Climate change may exacerbate health risks and inequalities across these categories and in a variety of ways, if adequate adaptation measures are not taken. Certain changes to the indoor environment can affect indoor air quality or promote the growth and propagation of pathogenic organisms. Measures aimed at reducing greenhouse gas emissions have the potential for ancillary public health benefits including reductions in health burdens related heat and cold, indoor exposure to air pollution derived from outdoor sources, and mould growth. However, increasing airtightness of dwellings in pursuit of energy efficiency could also have negative effects by increasing concentrations of pollutants (such as PM_2.5, CO and radon) derived from indoor or ground sources, and biological contamination. These effects can largely be ameliorated by mechanical ventilation with heat recovery (MVHR) and air filtration, where such solution is feasible and when the system is properly installed, operated and maintained. Groups at high risk of these adverse health effects include the elderly (especially those living on their own), individuals with pre-existing illnesses, people living in overcrowded accommodation, and the socioeconomically deprived.A better understanding of how current and emerging building infrastructure design, construction, and materials may affect health in the context of climate change and mitigation and adaptation measures is needed in the UK and other high income countries. Long-term, energy efficient building design interventions, ensuring adequate ventilation, need to be promoted.     

Characterisation of human exposure pathways to perfluorinated compounds--comparing exposure estimates with biomarkers of exposure

Commercially used per- and polyfluorinated compounds (PFCs) have been widely detected in humans, but the sources of human exposure are not fully characterized. The objectives of this study were to assess the relative importance of different exposure pathways of PFCs in a group of Norwegians and compare estimated intakes with internal doses obtained through biomonitoring. Individual PFC intakes from multiple exposure sources for a study group of 41 Norwegian women were estimated using measured PFC concentrations in indoor air and house dust as well as information from food frequency questionnaires and PFC concentrations in Norwegian food. Food was generally the major exposure source, representing 67-84% of the median total intake for PFOA and 88-99% for PFOS using different dust ingestion rates and biotransformation factors of 'precursor' compounds. However, on an individual basis, the indoor environment accounted for up to around 50% of the total intake for several women. Significant positive associations between concentrations of PFCs in house dust and the corresponding serum concentrations underline the importance of indoor environment as an exposure pathway for PFCs. For breast-fed infants, breast milk was calculated to be the single most important source to PFCs by far. The estimated intakes were confirmed by comparing serum concentrations of PFOA and PFOS calculated using PK models, with the corresponding concentrations measured in serum. Even though food in general is the major source of exposure for PFCs, the indoor environment may be an important contributor to human exposure. This study provides valuable knowledge for risk assessment of PFCs and control strategies.     

Combustion particles emitted during church services: Implications for human respiratory health

Burning candles and incense generate particulate matter (PM) that produces poor indoor air quality and may cause human pulmonary problems. This study physically characterised combustion particles collected in a church during services. In addition, the emissions from five types of candles and two types of incense were investigated using a combustion chamber. The plasmid scission assay was used to determine the oxidative capacities of these church particles. The corresponding risk factor (CRf) was derived from the emission factor (Ef) and the oxidative DNA damage, and used to evaluate the relative respiratory exposure risks. Real-time PM measurements in the church during candle–incense burning services showed that the levels (91.6 μg/m³ for PM₁₀; 38.9 μg/m³ for PM_2.5) exceeded the European Union (EU) air quality guidelines. The combustion chamber testing, using the same environmental conditions, showed that the incense Ef for both PM₁₀ (490.6–587.9 mg/g) and PM_2.5 (290.1–417.2 mg/g) exceeded that of candles; particularly the PM_2.5 emissions. These CRf results suggested that the exposure to significant amounts of incense PM could result in a higher risk of oxidative DNA adducts (27.4–32.8 times) than tobacco PM. The generation and subsequent inhalation of PM during church activities may therefore pose significant risks in terms of respiratory health effects.     

Modeling indoor air pollution of outdoor origin in homes of SAPALDIA subjects in Switzerland

Given the shrinking spatial contrasts in outdoor air pollution in Switzerland and the trends toward tightly insulated buildings, the Swiss Cohort Study on Air Pollution and Lung and Heart Diseases in Adults (SAPALDIA) needs to understand to what extent outdoor air pollution remains a determinant for residential indoor exposure. The objectives of this paper are to identify determining factors for indoor air pollution concentrations of particulate matter (PM), ultrafine particles in the size range from 15 to 300 nm, black smoke measured as light absorbance of PM (PM_absorbance) and nitrogen dioxide (NO₂) and to develop predictive indoor models for SAPALDIA. Multivariable regression models were developed based on indoor and outdoor measurements among homes of selected SAPALDIA participants in three urban (Basel, Geneva, Lugano) and one rural region (Wald ZH) in Switzerland, various home characteristics and reported indoor sources such as cooking. Outdoor levels of air pollutants were important predictors for indoor air pollutants, except for the coarse particle fraction. The fractions of outdoor concentrations infiltrating indoors were between 30% and 66%, the highest one was observed for PM_absorbance. A modifying effect of open windows was found for NO₂ and the ultrafine particle number concentration. Cooking was associated with increased particle and NO₂ levels. This study shows that outdoor air pollution remains an important determinant of residential indoor air pollution in Switzerland.     

Life cycle impact assessment modeling for particulate matter: A new approach based on physico-chemical particle properties

Particulate matter (PM) causes severe damage to human health globally. Airborne PM is a mixture of solid and liquid droplets suspended in air. It consists of organic and inorganic components, and the particles of concern range in size from a few nanometers to approximately 10 μm. The complexity of PM is considered to be the reason for the poor understanding of PM and may also be the reason why PM in environmental impact assessment is poorly defined. Currently, life cycle impact assessment is unable to differentiate highly toxic soot particles from relatively harmless sea salt. The aim of this article is to present a new impact assessment for PM where the impact of PM is modeled based on particle physico-chemical properties. With the new method, 2781 characterization factors that account for particle mass, particle number concentration, particle size, chemical composition and solubility were calculated. Because particle sizes vary over four orders of magnitudes, a sound assessment of PM requires that the exposure model includes deposition of particles in the lungs and that the fate model includes coagulation as a removal mechanism for ultrafine particles. The effects model combines effects from particle size, solubility and chemical composition. The first results from case studies suggest that PM that stems from emissions generally assumed to be highly toxic (e.g. biomass combustion and fossil fuel combustion) might lead to results that are similar compared with an assessment of PM using established methods. However, if harmless PM emissions are emitted, established methods enormously overestimate the damage. The new impact assessment allows a high resolution of the damage allocatable to different size fractions or chemical components. This feature supports a more efficient optimization of processes and products when combating air pollution.     

Wintertime indoor air levels of PM10, PM2.5 and PM1 at public places and their contributions to TSP

From 26 October 2002 to 8 March 2003, particulate matter (PM) concentrations (total suspended particles [TSP], PM10, PM2.5 and PM1) were measured at 49 public places representing different environments in the urban area of Beijing. The objectives of this study were (1) to characterize the indoor PM concentrations in public places, (2) to evaluate the potential indoor sources and (3) to investigate the contribution of PM10 to TSP and the contributions of PM2.5 and PM1 to PM10. Additionally, The indoor and outdoor particle concentrations in the same type of indoor environment were employed to investigate the I/O level, and comparison was made between I/O levels in different types of indoor environment. Construction activities and traffic condition were the major outdoor sources to influence the indoor particle levels. The contribution of PM10 to TSP was even up to 68.8%, while the contributions of PM2.5 and PM1 to PM10 were not as much as that of PM10 to TSP.     

Probabilistic mercury multimedia exposure assessment in small children and risk assessment

ObjectivesEmissions of mercury in the environment have been decreasing for several years. However, mercury species are still found in different media (food, water, air and breast-milk). Due to mercury toxicity and typical behaviour in children, we have conducted a mercury exposure assessment in French babies, and small children aged 0 to 36 months.MethodConsumption and mercury concentration data were chosen for the exposure assessment. The Monte Carlo technique has been used to calculate the weekly exposure dose in order to integrate inter-individual variability and parameter uncertainty. Exposure values have been compared to toxicological reference values for health risk assessment.ResultsInorganic mercury median exposure levels ranged from 0.160 to 1.649 μg/kg of body weight per week (95th percentile (P95): 0.298–2.027 µg/kg bw/week); elemental mercury median exposure level in children was 0.11 ng/kg bw/week (P95: 28 ng/kg bw/week); and methylmercury median exposure level ranged from 0.247 to 0.273 µg/kg bw/week (P95: 0.425–0.463 µg/kg bw/week). Only elemental mercury by inhalation route (indoor air) and methylmercury by ingestion (fish and breast-milk) seem to lead to a health risk in small children.ConclusionsThese results confirm the importance of assessing total mercury concentration in media like breast-milk, indoor air and dust and methylmercury level in food, other than fish and seafood. In this way, informed monitoring plan and risk assessment in an at-risk sub-population can be set.     

Comparative overview of indoor air quality in Antwerp, Belgium

This comprehensive study, a first in Belgium, aimed at characterizing the residential and school indoor air quality of subgroups that took part in the European Community Respiratory Health Survey and the International Study of Asthma and Allergy in Childhood [Masoli M, Fabian D, Holt S, Beasley R. Global Burden of Asthma, Medical Research Institute of New Zealand, University of Southampton; 2004.] questionnaire-based asthma and related illnesses studies. The principal aim was to perform a base-line study to assess the indoor air quality in Antwerp in terms of various gaseous and particulate pollutants. Secondly, it aimed to establish correlations between these pollutants investigated, the pollutant levels in the indoor and outdoor micro-environments, findings of the previous questionnaire-based studies and an epidemiological study which ran in conjunction with this study. Lastly, these results were compared and evaluated with current indoor and ambient guidelines in various countries This paper presents selected results on PM1, PM2.5 and PM10 mass concentrations and elemental C estimates as black smoke, as well as gaseous NO(2), SO(2), O(3) and BTEX concentrations of 18 residences and 27 schools. These are related to current guidelines of Flanders, Germany, Norway, China and Canada and evaluated with reference to selected similar studies. It was found that indoor sources such as tobacco smoking and carpets, the latter causing re-suspension of dust, are responsible for elevated indoor respirable particulate matter and place school children and residents at risk. Both PM2.5 and PM10 equalled or exceeded the current guidelines adopted by Flanders, noting that 12-h and 24-h PM2.5 were compared with an annual limit value. Indoor and ambient NO(2) concentrations in the school campaign were higher than the annual EU ambient norm. The other studied pollutant levels were below the current guidelines.     

Chlorinated paraffins in indoor air and dust: concentrations, congener patterns, and human exposure

Chlorinated paraffins (CPs) are large production volume chemicals used in a wide variety of commercial applications. They are ubiquitous in the environment and humans. Human exposure via the indoor environment has, however, been barely investigated. In the present study 44 indoor air and six dust samples from apartments in Stockholm, Sweden, were analyzed for CPs, and indoor air concentrations are reported for the first time. The sumCP concentration (short chain CPs (SCCPs) and medium chain CPs (MCCPs)) in air ranged from <5-210 ng m(-3) as quantified by gas chromatography coupled to electron ionization tandem mass spectrometry (GC/EI-MS/MS). Congener group patterns were studied using GC with electron capture negative ionization MS (GC/ECNI-MS). The air samples were dominated by the more volatile SCCPs compared to MCCPs. SumCPs were quantified by GC/EI-MS/MS in the dust samples at low μg g(-1) levels, with a chromatographic pattern suggesting the prevalence of longer chain CPs compared to air. The median exposure to sumCPs via the indoor environment was estimated to be ~1 μg day(-1) for both adults and toddlers. Adult exposure was dominated by inhalation, while dust ingestion was suggested to be more important for toddlers. Comparing these results to literature data on dietary intake indicates that human exposure to CPs from the indoor environment is not negligible.     

Chlorpyrifos in surface waters before and after a federally mandated ban

Samples collected from rural and urban streams in the City of Denton, Texas, USA were analyzed for the organophosphorus pesticides diazinon and chlorpyrifos during the years preceding and following a United States Environmental Protection Agency ban on many chlorpyrifos uses. A network of 70 monitoring stations, based mainly on topography and hydrological considerations, were established within the three main watersheds of Denton. Monitoring stations were sampled monthly from March through August during periods of normal flow (baseflow), resulting in a total of 308 samples and 311 samples collected during 2001 and 2002, respectively. Pesticide concentrations were determined using commercially available enzyme-linked immunosorbent assays (ELISA) specific for each pesticide. Results from this temporally and spatially dense monitoring effort were used to illustrate the impacts of a ban on most chlorpyrifos sales that was imposed in December 2001. The total number of samples exhibiting concentrations above method lower limits of detection (LLD) decreased between 2001 and 2002 for both chlorpyrifos and diazinon. The total number of sites exhibiting at least one sample with concentrations above the LLD for chlorpyrifos, however, significantly decreased (Fisher's exact test, p<0.0001, n=70) when comparing 2001 (before the ban) with 2002 (after the ban). Similar analyses indicated no significant difference (Fisher's exact test, p=0.50, n=70) in the number of sites exhibiting detectable diazinon concentration between 2001 and 2002. Our results indicate that the cessation of retail chlorpyrifos sales at the end of 2001 resulted in a highly significant decrease in the surface water occurrences of this pesticide during 2002.     

Assessment of indoor air quality and housing,household and health characteristics in densely populated urban slums

Environment, Development and Sustainability - This study provides the first quantitative assessment of seasonal variation in indoor PM2.5 in the high-air pollution risk and densely populated slums...     

Volatile organic compounds in indoor environment and photocatalytic oxidation: state of the art

Volatile organic compounds (VOCs) are the major pollutants in indoor air, which significantly impact indoor air quality and thus influencing human health. A long-term exposure to VOCs will be detrimental to human health causing sick building syndrome (SBS). Photocatalytic oxidation of VOCs is a cost-effective technology for VOCs removal compared with adsorption, biofiltration, or thermal catalysis. In this paper, we review the current exposure level of VOCs in various indoor environment and state of the art technology for photocatalytic oxidation of VOCs from indoor air. The concentrations and emission rates of commonly occurring VOCs in indoor air are presented. The effective catalyst systems, under UV and visible light, are discussed and the kinetics of photocatalytic oxidation is also presented.     

Scenario-model-parameter: a new method of cumulative risk uncertainty analysis

The recently developed concepts of aggregate risk and cumulative risk rectify two limitations associated with the classical risk assessment paradigm established in the early 1980s. Aggregate exposure denotes the amount of one pollutant available at the biological exchange boundaries from multiple routes of exposure. Cumulative risk assessment is defined as an assessment of risk from the accumulation of a common toxic effect from all routes of exposure to multiple chemicals sharing a common mechanism of toxicity. Thus, cumulative risk constitutes an improvement over the classical risk paradigm, which treats exposures from multiple routes as independent events associated with each specific route. Risk assessors formulate complex models and identify many realistic scenarios of exposure that enable them to estimate risks from exposures to multiple pollutants and multiple routes. The increase in complexity of the risk assessment process is likely to increase risk uncertainty. Despite evidence that scenario and model uncertainty contribute to the overall uncertainty of cumulative risk estimates, present uncertainty analysis of risk estimates accounts only for parameter uncertainty and excludes model and scenario uncertainties. This paper provides a synopsis of the risk assessment evolution and associated uncertainty analysis methods. This evolution leads to the concept of the scenario-model-parameter (SW) cumulative risk uncertainty analysis method. The SMP uncertainty analysis is a multiple step procedure that assesses uncertainty associated with the use of judiciously selected scenarios and models of exposure and risk. Ultimately, the SMP uncertainty analysis method compares risk uncertainty estimates determined using all three sources of uncertainty with conventional risk uncertainty estimates obtained using only the parameter source. An example of applying the SMP uncertainty analysis to cumulative risk estimates from exposures to two pesticides indicates that inclusion of scenario and model sources.     

Health benefits from reducing indoor air pollution from household solid fuel use in China--three abatement scenarios

According to the World Health Organization (WHO), indoor air pollution (IAP) from the use of solid fuels in households in the developing world is responsible for more than 1.6 million premature deaths each year, whereof 0.42 million occur in China alone. We argue that the methodology applied by WHO--the so-called fuel-based approach--underestimates the health effects, and suggest an alternative method. Combining exposure-response functions and current mortality and morbidity rates, we estimate the burden of disease of IAP in China and the impacts of three abatement scenarios. Using linear exposure-response functions, we find that 3.5 [0.8-14.7 95% CI] million people die prematurely due to IAP in China each year. The central estimate constitutes 47% of all deaths in China. We find that modest changes in the use of cooking fuels in rural households might have a large health impact, reducing annual mortality by 0.63 [0.1-3. 2 95% CI] million. If the indoor air quality (IAQ) standard set by the Chinese government (150 microg PM(10)/m(3)) was met in all households, we estimate that 0.9 [0.2-4.8] million premature deaths would be avoided in urban areas and 2.8 [0.7-12.4] million in rural areas. However, in urban areas this would require improvements to the outdoor air quality in addition to a complete fuel switch to clean fuels in households. We estimate that a fuel switch in urban China could prevent 0.7 [0.2-4.8] million premature deaths. The methodology for exposure assessment applied here is probably more realistic than the fuel-based approach; however, the use of linear exposure-response relationships most likely tends to overestimate the effects. The discrepancies between our results and the WHO estimates is probably also explained by our use of "all-cause mortality" which includes important causes of death like cardiovascular diseases, conditions known to be closely associated with exposure to particulate pollution, whereas the WHO estimate is limited to respiratory diseases.     

Symptoms prevalence among office workers of a sealed versus a non-sealed building: Associations to indoor air quality

ObjectivesAn increasing number of complaints related to time spent in artificially ventilated buildings have been progressively reported and attributed, at least in part, to physical and chemical exposures in the office environment. The objective of this research was to investigate the association between the prevalence of work-related symptoms and the indoor air quality, comparing a sealed office building with a naturally ventilated one, considering, specially, the indoor concentration of TPM, TVOCs and the main individual VOCs.MethodsA cross-sectional study was performed to compare the prevalence of sick building syndrome (SBS) symptoms among 1736 office workers of a sealed office building and 950 of a non-sealed one, both in Rio de Janeiro's downtown. The prevalence of symptoms was obtained by a SBS standardized questionnaire. The IAQ of the buildings was evaluated through specific methods, to determine the temperature, humidity, particulate matter and volatile organic compound (VOC) concentrations.ResultsUpper airways and ophthalmic symptoms, tiredness and headache were highly prevalent in both buildings. Some symptoms were more prevalent in the sealed building: “eye dryness” 33.3% and 27.1% (p: 0.01); “runny nose” 37.3% and 31.3% (p: 0.03); “dry throat” 42% and 36% (p: 0.02); and “lethargy” 58.5% and 50.5% (p: 0.03) respectively. However, relative humidity and indoor total particulate matter (TPM) concentration as well as total volatile organic compounds (TVOCs) were paradoxically greater in the non-sealed building, in which aromatic compounds had higher concentration, especially benzene. The analysis between measured exposure levels and resulting symptoms showed no association among its prevalence and TPM, TVOCs, benzene or toluene concentration in none of the buildings.ConclusionsOther disregarded factors, like undetected VOCs, mites, molds and endotoxin concentrations, may be associated to the greater prevalence of symptoms in the sealed building.