New procedures for simultaneous determination of mesotrione and atrazine in water and soil. Comparison of the degradation processes of mesotrione and atrazine

A method for the determination of residues of mesotrione, atrazine and its degradation products: deethylatrazine, hydroxyatrazine, deisopropylatrazine, desethyldesisopropylatrazine in a variety of water and soil matrices has been developed. Mesotrione is a new selective herbicide for use in corn, which has been substituted for atrazine, which has been banned in European Union countries since 2007. Although atrazine has not been used for three vegetative periods, it is still detected in the environment. The analysis was conducted by means of ultra-high-pressure liquid chromatography with ultraviolet detection and liquid chromatography with diode array detection. The procedures for analyte separation from water and soil matrices were also established. The optimal conditions for solid-phase extraction (SPE) were determined. The recoveries were compared with that obtained by means of SPE. Method fortification recoveries from water samples averaged 78–97% and for soil 80–97% depending on the analyte and type of sample. The limits of detection were 0.04–0.61 μg/L for water samples and for soil samples 0.02–0.88 μg/g. The soil samples were collected in spring 2009 from three different fields with water samples being made from effluents from these fields. Samples collection was conducted in the day of mesotrione (Callisto 100SC) application and then done weekly, until the mesotrione concentration was below the limit of quantification. The results enabled the monitoring of mesotrione degradation in soil and its permeability into surface waters; simultaneously, the same studies were conducted for atrazine.     

Cleanup of fractured rock aquifers: Implications of matrix diffusion

As contamination moves through a fractured rock aquifer, it tends to diffuse from the flowing fracture water into the rock's essentially stagnant pore water. This process tends both to retard a contamination plume's advance through a fractured rock aquifer and to substantially increase the difficulty of purging contamination from the aquifer. A mathematical model has been developed to evaluate the potential impact of this phenomenon upon water quality restoration in fractured rock aquifers. The numerical modeling reveals that cleanup of fractured rock aquifers will, in many cases, require many decades, even centuries, to achieve, particularly where substantial improvements in water quality are sought. The parameters which most strongly govern the degree to which matrix diffusion prolongs the aquifer restoration process are the rock's matrix porosity, fracture spacing, and matrix diffusivity, the chemical identity of the contaminant(s), and the length of time the aquifer has been contaminated.Since sedimentary rocks tend to have both relatively high matrix porosities and matrix diffusivities, it can be particularly difficult to purge contamination from sedimentary rock aquifers. Crystalline rocks, in contrast, typically have lower matrix porosities and matrix diffusivities, and therefore undergo more rapid cleanup. However, even in crystalline rocks, attainment of very high degrees of water quality improvement may be problematic. Numerical modeling also indicates that conventional groundwater pump and treat programs are not likely to be very effective in speeding up aquifer restoration if the rate limiting step in the process is diffusion of contaminants from the rock matrix.     

Matrix diffusion effects in the cleanup of heterogeneous aquifers

Simple mathematical models are developed to account for the rather slow mass transport of nonaqueous phase liquid (NAPL) into aqueous solution in groundwater during flushing operations. The models are based on the assumption that this bottleneck in the process is associated with diffusion in the aqueous phase in the porous medium from the location of the NAPL drops/ganglia in a region of relatively low permeability out into a region of substantially higher permeability, somewhat analogous to diffusion from a block of porous rock into a nearby fracture, where the fracture system overwhelmingly dominates the overall permeability. The models include batch flushing, flushing in a laboratory column, and a one-dimensional model for flushing by means of a single recovery well.     

Mathematical Modeling of Column and Field Dense Nonaqueous Phase Liquid Tracer Tests

Mathematical models for the simulation of dense nonaqueous phase liquid tracer tests (DTTs) in laboratory columns and in the field are developed and examined. The DTT technique is a means of estimating the quantity of dense nonaqueous phase liquid (DNAPL) in a domain of interest in an aquifer. The two-dimensional field DTT model uses the Method of Principal Directions and an asymmetrical upwind algorithm for describing advective transport. Both models include diffusion transport of tracer into and from low-permeability porous structures such as clay lenses, as well as the mass transport kinetics of partitioning tracer to and from the DNAPL droplets. The dependence of the effluent tracer concentration curves on the parameters of the models is explored, and conclusions are drawn regarding the applicability of, and several possible problems with, the DTT technique. Model results indicate that the DTT performs well at locating distributed droplets of DNAPL, but is unlikely to be useful in the assessment of pooled DNAPL.     

Soil Gas Volatile Organic Compound Concentration Contours for Locating Vadose Zone Nonaqueous Phase Liquid Contamination

Diffusion of VOC from cylindrical vadose zone domains contaminatedwith distributed nonaqueous phase liquid is examined in the steadystate approximation. The effects of first-order biodegradation and ofan extended underlying pool of LNAPL floating on the water table belowthe cylindrical domain are explored by means of an orthogonal functionsapproach. The distribution of VOC in the vadose zone above a floatingcircular LNAPL pool of finite size is explored by a numerical method.The results provide information useful in estimating the spacing anddepth at which soil gas samples should be taken in order to detect thepresence of such source areas. Comparison of model results with soilgas VOC measurements at various depths also provides insight into theextent to which natural biodegradation of the VOCs is taking place.     

石油化工废水中有机组分剖析

采用二氯甲烷液—液萃取预处理水样，气相色谱—质谱联用技术分析了炼油厂生化曝气池进、出水，腈纶厂干法纺丝废水及其经ＳＢＲ小试处理的出水中二氯甲烷可萃取的有机组分，并半定量地评估了生化处理对这些有机组分的去除效果。结果表明，炼油厂生化曝气池对酚类及芳烃类化合物的去除效果较好，而长链脂肪烃的去除率相对较低；腈纶干法纺丝工艺废水中可萃取的有机组分主要为Ｎ，Ｎ二甲基甲酰胺，其相对含量大于９５％（ｍ／ｍ），该废水经ＳＢＲ小试处理后，原水中各种可萃取的有机化合物均得到分解，结构发生了变化，但不能全部彻底地转化为ＣＯ２和水。     

Migration of pollutants in groundwater. VI. Flushing of DNAPL droplets/ganglia

Models for describing the flushing of DNAPL from contaminated aquifers are developed, and the dependence of the calculated cleanup times on the model parameters is explored. Diffusion transport from isolated DNAPL droplets, from low-permeability porous spherical domains containing distributed DNAPL droplets, and from low-permeability porous planar lamellae containing distributed DNAPL is analyzed, and the resulting expressions then coupled with the equations for advective transport of dissolved VOC by means of natural uniform flow and a system of injection and recovery wells generating a two-dimensional flow field. The models are readily run on currently available microcomputers. The results of computations with the models are consistent with the severe tailing and slow rates of remediation which are generally observed when DNAPLs are removed by flushing.     

Salinity variations in the water resources fed by the Etnean volcanic aquifers (Sicily, Italy): natural vs. anthropogenic causes

In this paper, in an attempt to reveal possible changes connected to natural or anthropogenic causes, the main results of hydrogeochemical monitoring carried out at Mount Etna are evaluated. We report on the salinity contents of the groundwaters that flow in fractured volcanics, which make up the flanks of the volcano. These waters, analyzed for major ion chemistry, were sampled regularly from 1994 to 2004. Basing on nonparametric Sen??s slope estimator, time series of groundwater composition reveal that the salinity of most of the Etnean aquifers increased by 0.5% to 3.5% each year during this period. This change in the water chemistry is clearly referable to the overexploitation of the aquifers. This increasing trend needs to be inverted urgently; otherwise, it will cause a shortage of water in the near future, because the maximum admissible concentration of salinity for drinking water will be exceeded.     

Assessment of Pollution Near Landfill Site in Nagpur, India by Resistivity Imaging and GPR

Groundwater pollution in the vicinity of a landfill site in Nagpur, India is assessed with the help of resistivity imaging and GPR tools. The resistivity imaging survey indicates high conductive anomalies in the topsoil as well as the underlying fractured rocks. Significant reflections from the GPR records known as radargrams are extracted with the help of maximum peak module and Hilbert transform module in RADAN 6. These reflections can be attributed to presence of fractures, which are potential pathways for migration of the fluid. The geophysical findings are strengthened by the results of groundwater analysis from wells located close to the profile where resistivity and GPR survey have been carried out. The study has indicated the vulnerability of the unconfined aquifer underlying the predominantly clay layer.     

Migration of pollutants in groundwater. V. Modelling the removal of DNAPL droplets by flushing

Mathematical models are developed for the flushing of droplets of dense nonaqueous phase liquids (DNAPLs) distributed in aquifers. The kinetics of the diffusion of dissolved volatile organic compound (VOC) from the droplets into the moving liquid is included in the models. Models are developed for the flushing of DNAPL droplets in lab columns, in aquifers with a one-dimensional radial flow field and in quiescent aquifers in which a single well screened at the bottom is used to bring about the flushing. Some representative results are given.     

The QUASIMEME laboratory performance study of polycyclic aromatic hydrocarbons (PAHs): assessment for the period 1996-1999. Quality Assurance of Information in Marine Environmental Monitoring in Europe

The results of the laboratory performance studies held during the period 1996-99 and involving the determination of PAHs in sediments and biota have been assessed. Overall 67% of the data submitted met the QUASIMEME criterion for satisfactory performance, although differences in performance were apparent between the two main analytical techniques employed: gas chromatography and high-performance liquid chromatography. Further development of PAH methodology utilising coupled gas chromatography mass spectrometry is encouraged as the most appropriate means of meeting the future requirements for the determination of a wider range of PAH analytes. More reference materials are also urgently required for use in marine monitoring programmes, and they need to be certified for a wider range of PAHs than hitherto, including both parent PAHs and their alkylated derivatives.     

溢油的GPC色谱鉴定

本文利用ＧＰＣ色谱测定物质分子量分布的特点，对溢油和怀疑溢油源ＧＰＣ色谱测定的结果，进行比较，找出溢油源。     

能见度分级约束下的大气气溶胶光学厚度特征

利用ＰＩＳ太阳光谱仪观测了北京地区１９９３年３月—１９９５年３月晴天和少云天气的太阳直接辐射光谱，波长范围为０．４０－１．０４μｍ。光谱分辨率１．２５ｎｍ，共有１０６４组数据。观测期间，将地面能见度分为五级。由太阳直射谱获得了各能见度下大气气溶胶光学厚度谱。研究表明，北京地区大气气溶胶光学厚度虽然其总体季节统计规律为春夏大，秋冬小，然而，当加入能见度分级约束后，各能见度下气溶胶光学厚度的季节变化，近于消失。这表明少数“反常”垂直结构不影响能见度分级的平均结果。而不分级的光学厚度季节起伏主要由各季节的几率能见度决定。文中还把年平均五种能见度下的光谱光学厚度与ＬＯＷＴＲＡＮ模式作了对比。由光学厚度谱反演出了气溶胶粒子谱分布，为建立我国北方局地气溶胶模式构造了基本框架     

Emission characteristics of VOCs from three fixed-roof p-xylene liquid storage tanks

This study evaluates emission characteristics of volatile organic compounds (VOCs) caused by standing loss (L _S) and working loss (L _W) of three vertical fixed-roof p-xylene (p-X) liquid tanks during 1-year storage and filling operation. The annual net throughput of the tanks reached 70,446 t, resulting in 9,425 kg of p-X vapor emission including 5,046 kg of L _S (53.54 %) and 4,379 kg of L _W (46.46 %). The estimated L _W of AP-42 displayed better agreement with the measured values of a VOC detector than the estimated L _S of AP-42. The L _S was best correlated with the liquid height of the tanks, while the L _W was best correlated with the net throughput of the tanks. As a result, decreasing vapor space volume of the tanks and avoiding high net throughput of the tanks in a high ambient temperature period were considered as effective means to lessen VOC emission from the fixed-roof organic liquid storage tank.     

Experimental Methodology to Assess Contaminant Diffusion in Rock Mass

Monitoring changes in electrical conductivity (EC) of aqueous phase, due to contaminant diffusion through porous media, is one of the techniques followed by researchers to understand the migration mechanism. However, the contaminant diffusion in the rock mass is a slow process and hence detecting small changes in conductivity with the help of conventional laboratory conductivity meters is quite difficult. With this in view, an experimental methodology to monitor diffusion of contaminant(s) through the intact and fractured rock mass, with the help of a USDTS (Ultra-Sensitive Devices and Technical Services) conductivity meter, has been developed. Results have been validated with those obtained from the ion chromatograph (IC) technique and a good agreement has been noted. The study demonstrates usefulness of the proposed methodology for online monitoring of contaminant migration through the porous media.     

Preliminary evaluation of evaluation of the efficiency of aircraft liquid waste treatment using resolvable sanitizing liquid: a case study in Changchun

The physical, chemical, and biological indices of aircraft liquid wastes collected from multiple airplanes at Longjia Airport, Changchun, China were measured according to "Integrated Wastewater Discharge Standard," evaluating treatment efficiency of resolvable sanitizing liquid. The results indicate that, after being treated by the resolvable sanitizing liquid, the indices of all first-class pollutants met the requirements of the standard, while among the second-class pollutants, the suspension content, biochemical oxygen demand after 5 days, and chemical oxygen demand as well as the contents of amino nitrogen, total phosphorus, anionic surfactants, total copper, absorbable organic halogen, and phenolic compounds did not reach the discharge standard. Particularly, the level of fecal coliform bacteria in the aircraft liquid wastes can meet the standard specification by adding more than 1 mL/L resolvable sanitizing liquid. The aircraft wastewater treated by resolvable sanitizing liquid cannot be directly discharged back into the environment as well as urban drainage systems.     

公园地表土中多环芳烃的分离提取及含量分析

比较加压液体萃取法、超声波辅助萃取技术和微波辅助提取技术对公园地表土中多环芳烃的提取效率,并对目标化学成分进行分析鉴定。以超高效液相色谱-三重四极杆质谱作为分析方法,共分离检测出16种多环芳烃类化合物,分别为萘、苊、苊烯、氟、菲、蒽、荧蒽、芘、苯并[a]蒽、艹屈、苯并[b]荧蒽、苯并[k]荧蒽、苯并[a]芘、二苯并[a,h]蒽、茚并[1,2,3-cd]芘和苯并[ghi]苝。结果表明:加压液体萃取法、超声波辅助萃取技术和微波辅助提取技术均可以有效提取公园地表土中多环芳烃类成分。超高效液相色谱-质谱联用技术可以有效地分析公园地表土中多环芳烃类成分。     

内陆核设施废液零排放方式探讨

液态放射性流出物是核设施运行的必然产物,滨海核设施向大海进行稀释排放处置,内陆核设施缺少稀释载体,采用自然蒸发空气载带方式将液体流出物通过气态途径向大气稀释排放是可行的替代方案,可以实现液态流出物的零排放.自然蒸发空气载带排放方案描述了工艺原理,提出了空气流速、空气温度、环境相对湿度、废水温度等与蒸发强度的关系,给出了...     

Incineration of hazardous wastes

Glaxo has practiced incineration of liquid and gaseous wastes for over twenty years and currently operate eleven liquid and gas incinerators in the United Kingdom and Singapore. The liquid incinerators burn, as their main streams, those solvents that cannot be recovered and recycled within the processes. The early installations were for readily combustible solvents only. However, there has been a progressive move into the destruction of more difficult and hazardous wastes, with the consequential requirements for more sophisticated technology, in the belief that the responsible destruction of waste should be tackled near to its source. The eventual aim is to be self-sufficient in this area of waste management. The incineration of hazardous liquid and gaseous waste has presented a series of design, operational and monitoring problems into account which have all been successfully overcome. The solutions take into account the environmental consequences of the operations from both liquid and gaseous emissions. In order to ensure minimal environmental impact and safe operation the best practicable technology is employed. Environmental assessment forms part of the process development and permitting procedures.Plenary speaker.     

Reducing dust exposure in indoor climbing gyms

As users of indoor climbing gyms are exposed to high concentrations (PM(10) up to 4000 μg m(-3); PM(2.5) up to 500 μg m(-3)) of hydrated magnesium carbonate hydroxide (magnesia alba), reduction strategies have to be developed. In the present paper, the influence of the use of different kinds of magnesia alba on dust concentrations is investigated. Mass concentrations, number concentrations and size distributions of particles in indoor climbing gyms were determined with an optical particle counter, a synchronized, hybrid ambient real-time particulate monitor and an electrical aerosol spectrometer. PM(10) obtained with these three different techniques generally agreed within 25%. Seven different situations of magnesia alba usage were studied under controlled climbing activities. The use of a suspension of magnesia alba in ethanol (liquid chalk) leads to similar low mass concentrations as the prohibition of magnesia alba. Thus, liquid chalk appears to be a low-budget option to reduce dust concentrations. Magnesia alba pressed into blocks, used as powder or sieved to 2-4 mm diameter, does not lead to significant reduction of the dust concentrations. The same is true for chalk balls (powder enclosed in a sack of porous mesh material). The promotion of this kind of magnesia alba as a means of exposure reduction (as seen in many climbing gyms) is not supported by our results. Particle number concentrations are not influenced by the different kinds of magnesia alba used. The particle size distributions show that the use of magnesia alba predominantly leads to emission of particles with diameters above 1 μm.