Combining polar organic chemical integrative samplers (POCIS) with toxicity testing to evaluate pesticide mixture effects on natural phototrophic biofilms

Polar organic chemical integrative samplers (POCIS) are valuable tools in passive sampling methods for monitoring polar organic pesticides in freshwaters. Pesticides extracted from the environment using such methods can be used to toxicity tests. This study evaluated the acute effects of POCIS extracts on natural phototrophic biofilm communities. Our results demonstrate an effect of POCIS pesticide mixtures on chlorophyll a fluorescence, photosynthetic efficiency and community structure. Nevertheless, the range of biofilm responses differs according to origin of the biofilms tested, revealing spatial variations in the sensitivity of natural communities in the studied stream. Combining passive sampler extracts with community-level toxicity tests offers promising perspectives for ecological risk assessment.     

Uptake rates of alkylphenols, PAHs and carbazoles in semipermeable membrane devices (SPMDs) and polar organic chemical integrative samplers (POCIS)

Passive sampling devices provide a useful contribution to the monitoring of contaminants in the aquatic environment. However, calibration data needed for the calculation of water concentrations from sampler accumulations are restricted to a limited number of compound classes. Thus uptake of a range of alkylated phenols (AP), polycyclic aromatic hydrocarbons (PAH) and carbazoles was determined for semipermeable membrane devices (SPMDs) and polar organic chemical integrative samplers (POCIS) using a flow through exposure system. Sampling rates ranged from 0.02 to 0.26 l d(-1) for POCIS and 0.02 to 13.83 l d(-1) for SPMDs. Observed SPMD uptake was also compared to that predicted by an empirical model including the use of performance reference compounds (PRCs). Predicted sampling rates did not differ by more than a factor of 1.3 from experimental values for PAH, providing further evidence that the PRC approach can be successfully used to determine in situ sampling rates for these compounds. Experimental sampling rates for AP in SPMDs were, however, much lower than predicted. This discrepancy was too large to be explained by small uncertainties in the calibration system or in the calculations. Based on these data we conclude that while hydrophobic AP are accumulated by SPMDs their partitioning cannot be predicted from their logK(ow) using current methods. Due to this lower than expected uptake, sampling rates were only higher in SPMDs than POCIS in the range of logK(ow)>5.0. Simultaneous deployment of both sampler types allows the study of compounds with a broad range of physicochemical properties.     

Passive sampling of perfluorinated acids and sulfonates using polar organic chemical integrative samplers

The applicability of a polar organic chemical integrative sampler (POCIS) for detection and determination of perfluorinated acids and sulfonates in water was studied under field conditions. Standard POCIS configurations (i.e., pharmaceutical and pesticide) were deployed in effluent from a wastewater treatment plant for 1, 2, and 3 weeks. Ten of 15 target compounds were found in POCIS, five of which were quantified in wastewater. Pest-POCIS appeared more effective for the sampling, while Pharm-POCIS had a more rapid uptake kinetic, which leads to faster saturation or equilibrium. The results showed that the pesticide configuration is probably more suitable for the sampling of this class of compounds. Based on average concentration in water over the sampling period and amount of compound adsorbed in the POCIS, we calculated sampling rates for five studied compounds and obtained values of 0.034 to 0.222 L?day^?1.     

Distribution of steroid- and dioxin-like activities between sediments, POCIS and SPMD in a French river subject to mixed pressures

The contamination of aquatic systems by endocrine disrupting chemicals (EDCs) is now a widely established fact. Nevertheless, there is still a scarcity of knowledge concerning the source, transport, fate and bioavailability of such active compounds. In the present study we assessed the distribution of estrogenic, (anti-)androgenic, pregnane X receptor-like (PXR) and dioxin-like activities between sediment and water compartments using a polar organic compound integrative sampler (POCIS) and a semi-permeable membrane device (SPMD) passive sampler in a river where sediment has been previously described as highly and multi-contaminated. We first confirmed the contamination pattern of this river sediment between 2004, 2009 and 2010 samples, suggesting that this river is subject to a constant high contamination level. However, we showed a different distribution pattern of these activities between compartments: estrogenic activity was mainly detected in POCIS extracts and to a lesser extent in sediment and SPMD extracts; anti-androgenic activities were mainly detected in SPMD and sediment extracts while no activity was detected in POCIS extracts; PXR-like activity was detected in all three investigated compartments, with POCIS > SPMD > sediment; dioxin-like activity was mainly found in the sediment and the SPMD extracts. Overall, partitioning of the biological activities was in accordance with physicochemical properties (e.g., log K _ow) of typical known active chemicals in each bioassay. Furthermore, in order to establish whether the chemicals involved in these activities were similar between the compartments, we fractionated sediment, POCIS and SPMD extracts using a multi-step fractionation procedure. This highlighted differences in the nature of active chemicals between compartments. Altogether, our results support the need to consider different compartments in order to enhance exposure assessment.     

Two sampling strategies for an overview of pesticide contamination in an agriculture-extensive headwater stream

Two headwaters located in southwest France were monitored for 3 and 2 years (Auvézère and Aixette watershed, respectively) with two sampling strategies: grab and passive sampling with polar organic chemical integrative sampler (POCIS). These watersheds are rural and characterized by agricultural areas with similar breeding practices, except that the Auvézère watershed contains apple production for agricultural diversification and the downstream portion of the Aixette watershed is in a peri-urban area. The agricultural activities of both are extensive, i.e., with limited supply of fertilizer and pesticides. The sampling strategies used here give specific information: grab samples for higher pesticide content and POCIS for contamination background noise and number of compounds found. Agricultural catchments in small headwater streams are characterized by a background noise of pesticide contamination in the range of 20–70 ng/L, but there may also be transient and high-peak pesticide contamination (2000–3000 ng/L) caused by rain events, poor use of pesticides, and/or the small size of the water body. This study demonstrates that between two specific runoff events, contamination was low; hence the importance of passive sampler use. While the peak pesticide concentrations seen here are a toxicity risk for aquatic life, the pesticide background noise of single compounds do not pose obvious acute nor chronic risks; however, this study did not consider the risk from synergistic “cocktail” effects. Proper tools and sampling strategies may link watershed activities (agricultural, non-agricultural) to pesticides detected in the water, and data from both grab and passive samples can contribute to discussions on environmental effects in headwaters, an area of great importance for biodiversity.     

Passive sampling of selected endocrine disrupting compounds using polar organic chemical integrative samplers

Two types of polar organic chemical integrative samplers (pharmaceutical POCIS and pesticide POCIS) were examined for their sampling efficiency of selected endocrine disrupting compounds (EDCs). Laboratory-based calibration of POCISs was conducted by exposing them at high and low concentrations of 14 EDCs (4-alkyl-phenols, their ethoxylate oligomers, bisphenol A, selected estrogens and synthetic steroids) for different time periods. The kinetic studies showed an integrative uptake up to 28 days. The sampling rates for the individual compounds were obtained. The use of POCISs could result in an integrative approach to the quality status of the aquatic systems especially in the case of high variation of water concentrations of EDCs. The sampling efficiency of POCISs under various field conditions was assessed after their deployment in different aquatic environments.     

Use of semipermeable membrane devices (SPMDs)

Triolein-containing semipermeable membrane devices (SPMDs) were employed as passive samplers to provide data on the bioavailable fraction of organic, waterborne, organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs) and polynuclear aromatic hydrocarbons (PAHs) in streams flowing through a highly polluted industrial area of Bitterfeld in Saxony-Anhalt, Germany. The contamination of the region with organic pollutants originates in wastewater effluents from the chemical industry, from over one-hundred years of lignite exploitation, and from chemical waste dumps. The main objective was to characterise time-integrated levels of dissolved contaminants, to use them for identification of spatial trends of contamination, and their relationship to potential pollution sources. SPMDs were deployed for 43 days in the summer of 1998 at four sampling sites. The total concentration of pollutants at sampling sites was found to range from a low of 0.8 microgram/SPMD to 25 micrograms/SPMD for PAHs, and from 0.4 microgram/SPMD to 22 micrograms/SPMD for OCPs, respectively. None of the selected PCB congeners was present at quantifiable levels at any sampling site. A point source of water pollution with OCPs and PAHs was identified in the river system considering the total contaminant concentrations and the distribution of individual compounds accumulated by SPMDs at different sampling sites. SPMD-data was also used to estimate average ambient water concentrations of the contaminants at each field site and compared with concentrations measured in bulk water extracts. The truly dissolved or bioavailable portion of contaminants at different sampling sites ranged from 4% to 86% for the PAHs, and from 8% to 18% for the OCPs included in the estimation. The fraction of individual compounds found in the freely dissolved form can be attributed to the range of their hydrophobicity. In comparison with liquid/liquid extraction of water samples, the SPMD method is more suitable for an assessment of the background concentrations of hydrophobic organic contaminants because of substantially lower method quantification limits. Moreover, contaminant residues sequestered by the SPMDs represent an estimation of the dissolved or readily bioavailable concentration of hydrophobic contaminants in water, which is not provided by most analytical approaches.     

A holistic passive integrative sampling approach for assessing the presence and potential impacts of waterborne environmental contaminants

As an integral part of our continuing research in environmental quality assessment approaches, we have developed a variety of passive integrative sampling devices widely applicable for use in defining the presence and potential impacts of a broad array of contaminants. The semipermeable membrane device has gained widespread use for sampling hydrophobic chemicals from water and air, the polar organic chemical integrative sampler is applicable for sequestering waterborne hydrophilic organic chemicals, the stabilized liquid membrane device is used to integratively sample waterborne ionic metals, and the passive integrative mercury sampler is applicable for sampling vapor phase or dissolved neutral mercury species. This suite of integrative samplers forms the basis for a new passive sampling approach for assessing the presence and potential toxicological significance of a broad spectrum of environmental contaminants. In a proof-of-concept study, three of our four passive integrative samplers were used to assess the presence of a wide variety of contaminants in the waters of a constructed wetland, and to determine the effectiveness of the constructed wetland in removing contaminants. The wetland is used for final polishing of secondary-treatment municipal wastewater and the effluent is used as a source of water for a state wildlife area. Numerous contaminants, including organochlorine pesticides, polycyclic aromatic hydrocarbons, organophosphate pesticides, and pharmaceutical chemicals (e.g., ibuprofen, oxindole, etc.) were detected in the wastewater. Herein we summarize the results of the analysis of the field-deployed samplers and demonstrate the utility of this holistic approach.     

Comparison between the polar organic chemical integrative sampler and the solid-phase extraction for estimating herbicide time-weighted average concentrations during a microcosm experiment

Polar organic chemical integrative samplers (POCIS) were exposed for 9 days in two different microcosms that contained river waters spiked with deethylterbuthylazine, terbuthylazine and isoproturon. The experiment was performed with natural light and strong turbulence (flow velocities of about 15-50cms(-1)) for reproducing natural conditions. The concentrations were kept relatively constant in the first microcosm (2.6-3.6mugl(-1)) and were variable in the second microcosm (peak concentrations ranged from 15 to 24mugl(-1) during the 3 day pulse phase). The time-weighted average (TWA) concentrations were determined with both POCIS and repetitive grab sampling followed by solid-phase extraction. The results showed a systematic and significant overestimation of the TWA concentrations with the POCIS most probably due to the use of sampling rates derived under low flow scenario. The results showed also that peak concentrations of pollutants are fully integrated by this passive sampler. Even if the POCIS should not provide very accurate concentration estimates without the application of adequate sampling rate values or the use of performance reference compounds, it can be a really useful tool for detecting episodic or short-term pollution events (e.g. increased herbicide concentrations during a flood), which may be missed with classical and low frequency grab sampling.     

In-vivo passive sampling to measure elimination kinetics in bioaccumulation tests

The application of in-tissue passive sampling to quantify chemical kinetics in fish bioconcentration experiments was investigated. A passive sampler consisting of an acupuncture needle covered with a PDMS tube was developed together with a method for its deployment in rainbow trout. The time to steady state for chemical uptake into the passive sampler was >1 d, so it was employed as a kinetically limited sampler with a deployment time of 2 h. The passive sampler was employed in parallel with the established whole tissue extraction method to study the elimination kinetics of 10 diverse chemicals in rainbow trout. 4-n-nonylphenol and 2,4,6-tri-tert-butylphenol were close to or below the limit of quantification in the sampler. For chlorpyrifos, musk xylene, hexachlorobenzene, 2,5-dichlorobiphenyl and p,p′-DDT, the elimination rate constants determined with the passive sampler method and the established method agreed within 18%. Poorer agreement (35%) was observed for 2,3,4-trichloroanisole and p-diisopropylbenzene because fewer data were obtained with the passive sampling method due to its lower sensitivity. The work shows that in-tissue passive sampling can be employed to measure contaminant elimination kinetics in fish. This opens up the possibility of studying contaminant kinetics in individual fish, thereby reducing the fish requirements and analytical costs for the determination of bioconcentration factors.     

Monitoring PAHs in the Brisbane River and Moreton Bay, Australia, using semipermeable membrane devices and EROD activity in yellowfin bream, Acanthopagrus australis

Two water quality monitoring strategies designed to sample hydrophobic organic contaminants have been applied and evaluated across an expected concentration gradient in PAHs in the Moreton region. Semipermeable membrane devices (SPMDs) that sequester contaminants via passive diffusion across a membrane were used to evaluate the concentration of PAHs at four and five sites in spring and summer 2001/2002, respectively. In addition, induction of hepatic cytochrome P4501, EROD activity, in yellowfin bream, Acanthopagrus australis, captured in the vicinity of SPMD sampling sites following deployment in summer was used as a biomarker of exposure to PAHs and related chemicals. SPMDs identified a clear and reproducible gradient in PAH contamination with levels increasing from east to west in Moreton Bay and upstream in the Brisbane River. The highest PAH concentrations expressed as B(a)P-toxicity equivalents (TEQs) were found in urban areas, which were also furthest upstream and experienced the least flushing. Cytochrome P4501 induction in A. australis was similar at all sites. The absence of clear trends in EROD activity may be attributable to factors not measured in this study or variable residency time of A. australis in contaminated areas. It is also possible that fish in the Moreton region are displaying enzymatic adaptation, which has been reported previously for fish subjected to chronic exposure to organic contaminants. These potential interferences complicate interpretation of EROD activity from feral biota. It is, therefore, suggested that future monitoring combine the two methods by applying passive sampler extracts to in vitro EROD assays.     

Grab and passive sampling applied to pesticide analysis in the São Lourenço river headwater in Campo Verde – MT,Brazil

In this study, the quality of surface water in the headwaters of São Lourenço River in Mato Grosso, Brazil, was evaluated in relation to contamination by pesticides. For this purpose, samples were collected between December 2015 and June 2016 by grab sampling and by passive sampling using an integrative polar organic compound sampler installed in the field during four 14-day cycles between March and June 2016. The analyses were performed by gas chromatography (CG/MS) and by liquid chromatography (UPLC-MS/MS). The results showed the detection of two pesticides (atrazine and pyraclostrobin) of the five analyzed by passive sampling and eight active principles among the 20 analyzed (malathion, diuron, carbofuran, carbendazim, trifluralin, imidacloprid, metolachlor, and acetamiprid) by grab sampling. The detection of 10 pesticides, even almost a decade after the beginning of a recovery process of the ciliary forest, confirms the headwaters' vulnerability to these contaminants and passive sampling proved to be an important tool in capturing small concentrations of pesticides constituting an interesting complement to grab sampling.     

Combining passive samplers and biomonitors to evaluate endocrine disrupting compounds in a wastewater treatment plant by LC/MS/MS and bioassay analyses

Two types of integrative sampling approaches (passive samplers and biomonitors) were tested for their sampling characteristics of selected endocrine disrupting compounds (EDCs). Chemical analyses (LC/MS/MS) were used to determine the amounts of five EDCs (nonylphenol, bisphenol A, estrone, 17β-estradiol and 17α-ethinylestradiol) in polar organic chemical integrative samplers (POCIS) and freshwater mussels (Unio pictorum); both had been deployed in the influent and effluent of a municipal wastewater treatment plant (WWTP) in Genoa, Italy. Estrogenicity of the POCIS samples was assessed using the yeast estrogen screen (YES). Estradiol equivalent values derived from the bioassay showed a positive correlation with estradiol equivalents calculated from chemical analyses data. As expected, the amount of estrogens and EEQ values in the effluent were lower than those in the influent. Passive sampling proved to be the preferred method for assessing the presence of these compounds since employing mussels had several disadvantages both in sampling efficiency and sample analyses.     

Polar organic chemical integrative sampler (POCIS) uptake rates for 17 polar pesticides and degradation products: laboratory calibration

Polar organic chemical integrative samplers (POCIS) are useful for monitoring a wide range of chemicals, including polar pesticides, in water bodies. However, few calibration data are available, which limits the use of these samplers for time-weighted average concentration measurements in an aquatic medium. This work deals with the laboratory calibration of the pharmaceutical configuration of a polar organic chemical integrative sampler (pharm-POCIS) for calculating the sampling rates of 17 polar pesticides (1.15?≤?logK _ow?≤?3.71) commonly found in water. The experiment, conducted for 21 days in a continuous water flow-through exposure system, showed an integrative accumulation of all studied pesticides for 15 days. Three compounds (metalaxyl, azoxystrobine, and terbuthylazine) remained integrative for the 21-day experiment. The sampling rates measured ranged from 67.9 to 279 mL?day^?1 and increased with the hydrophobicity of the pesticides until reaching a plateau where no significant variation in sampling rate is observed when increasing the hydrophobicity.     

POCIS passive samplers as a monitoring tool for pharmaceutical residues and their transformation products in marine environment

In the last years, several scientific studies have shown that carbamazepine (CBZ) is one of the most frequently detected pharmaceutical in aquatic environment. However, little data is available on its detection and its transformation products (TPs) in marine water. The use of polar organic chemical integrative sampling (POCIS) passive samplers as a semi-quantitative and qualitative tool for screening of pharmaceuticals and TPs in seawater has been studied. Furthermore, the uptake rates of the target compounds were also determined under laboratory experiments to characterize the levels accumulated in devices. The results confirmed the presence of residues of anticonvulsant CBZ as well as some of its main metabolites, over a 1-year monitoring campaign carried out in French coast on the Mediterranean Sea. The work reports for the first time the presence of two TPs (10,11-dihydro-10,11-trans-dihydroxycarbamazepine (TRANS) and 10-hydroxy-10,11-dihydrocarbamazepine (10OH)) in marine water. The results contribute in assessing the environmental and human health risk of pharmaceuticals on coastal areas.     

Ozonation of azo dye Acid Red 14 in a microporous tube-in-tube microchannel reactor: decolorization and mechanism

Despite the great success of time-weighted average passive sampling of hydrophobic contaminants, such as PCBs and PAHs, the sampling of polar organic compounds still presents a challenge because the equilibrium between water and most sampling phases is attained in a relatively short time. In this study, we proposed a new time-integrative sampler using in situ solvent extraction (TISIS) for polar organic chemicals. The sampler was composed of a 15 cm poly(dimethylsiloxane) (PDMS) tubing, with an internal diameter of 0.5 mm and wall thickness of 0.5 mm, through which an extraction solvent (acetonitrile) was passed. Four polar organic contaminants, caffeine, atrazine, diuron and 17α-ethynylestradiol, were chosen for the evaluation of the performance of the sampler. Without the use of in situ solvent extraction, the PDMS tubing when exposed to a constant aqueous concentration of the four model compounds was able to linearly accumulate those compounds for less than 12 h and equilibrium between the PDMS tubing and water was attained in 2 d under our laboratory conditions. However, TISIS when exposed to a constant aqueous concentration was able to linearly accumulate all the model compounds without any exposure time limitation. The measured sampling rates at three different extraction flow rates (0.2, 0.5, 1.5 mL min⁻¹) were similar, regardless of the chemicals, indicating that the overall mass transfer from aqueous solution to the extraction solvent was most likely dominated by partitioning to the PDMS tubing and the internal diffusion within PDMS. In addition, a pulsed exposure experiment confirmed that TISIS operated in a time-integrative mode when the environmental concentration was highly fluctuated.     

A review of the environmental fate and aquatic effects of a series of C4 and C8 oxo-process chemicals

Semipermeable membrane devices containing a neutral lipid triolein (triolein-SPMD) and conventional dichloromethane extraction were used to monitor the presence and concentrations of priority organic pollutants in a sewage treatment process in Beijing, China. Both samples gave similar information on the presence of target PCB congeners, PAHs, Organochlorine pesticides and substituted benzenes in sewage at all sites. After 20 days' sampling, the concentrations of contaminants in triolein of SPMD were much higher than those in dichloromethane extracts, which resulted in easier analysis, improved the detection limits, and increased the accuracy. Previous field mean sampling rates for SPMD were used to estimate concentrations of PCB congeners in sewage, which compared to their determined concentrations by dichloromethane extraction. The consistency and superiority of SPMD technology were proved for the detection of priority organic contaminants from sewage. Lower removal rates for PCB congeners and PAHs coincided with the persistence of them in environment. More attention should be paid to urban sewage treatment process adopting activated-sludge method, where priority organic pollutants might not be removed, even present higher concentrations after treatment.     

Evaluations of combined zebrafish (Danio rerio) embryo and marine phytoplankton (Diacronema lutheri) toxicity of dissolved organic contaminants in the Ythan catchment,Scotland, UK

A wide variety of organic contaminants including pesticides, polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) have previously been detected in surface waters in the river Ythan catchment, North East Scotland UK. While the concentrations detected were below Water Framework Directive Environmental Quality Standards (WFD-EQSs) environmental exposures to the diverse mixtures of contaminants, known and unknown, may pose chronic and/or sublethal effects to non target organisms. The present study assessed the embryo and algal toxicity potential of freely dissolved organic contaminants from the Ythan catchment using silicone rubber passive sampling devices (SR-PSDs) and miniaturised bioassay techniques. Zebrafish (Danio rerio) embryos and marine phytoplankton species (Diacronema lutheri) were exposed to extracts from SR-PSDs deployed at different locations along the river Ythan and an undeployed procedural blank. Statistically significant developmental and algal toxicities were measured in all tests of extracts from deployed samples compared with the procedural blanks. This indicates environmental exposure to, and the combined toxicity potential of, freely dissolved organic contaminants in the catchment. The present and previous studies in the Ythan catchment, coupling SR-PSDs and bioassay techniques, have both helped to understand the interactions and combined effects of dissolved organic contaminants in the catchment. They have further revealed the need for improvement in the techniques currently used to assess environmental impact.     

The effects of dissolved organic matter and pH on sampling rates for polar organic chemical integrative samplers (POCIS)

The effect of solution pH and levels of dissolved organic matter (DOM) on the sampling rates for model pharmaceuticals and personal care products (PPCPs) and endocrine disrupting substance (EDS) by polar organic chemical integrative samplers (POCIS) was investigated in laboratory experiments. A commercially available POCIS configuration containing neutral Oasis HLB (hydrophilic-lipophilic balance) resin (i.e. pharmaceutical POCIS) and two POCIS configurations prepared in-house containing MAX and MCX anion and cation exchange resins, respectively were tested for uptake of 21 model PPCPs and EDS, including acidic, phenolic, basic and neutral compounds. Laboratory experiments were conducted with dechlorinated tap water over a pH range of 3, 7 and 9. The effects of DOM were studied using natural water from an oligotrophic lake in Ontario, Canada (i.e. Plastic Lake) spiked with different amounts of DOM (the concentration of dissolved organic carbon ranged from 3 to 5 mg L⁻¹ in uptake experiments). In experiments with the commercial (HLB) POCIS, the MCX-POCIS and the MAX-POCIS, the sampling rates generally increased with pH for basic compounds and declined with pH for acidic compounds. However, the sampling rates were relatively constant across the pH range for phenols with high pKa values (i.e. bisphenol A, estrone, estradiol, triclosan) and for the neutral pharmaceutical, carbamazepine. Thus, uptake was greatest when the amount of the neutral species in solution was maximized relative to the ionized species. Although the solution pH affected the uptake of some model ionic compounds, the effect was by less than a factor of 3. There was no significant effect of DOM on sampling rates from Plastic Lake. However, uptake rates in different aqueous matrixes declined in the order of deionized water > Plastic Lake water > dechlorinated tap water, so other parameters must affect uptake into POCIS, although this influence will be minor. MAX-POCIS and MCX-POCIS showed little advantage over the commercial POCIS configuration for monitoring in natural waters.     

Calibration and field performance of membrane-enclosed sorptive coating for integrative passive sampling of persistent organic pollutants in water

Membrane-enclosed sorptive coating (MESCO) is a miniaturised monitoring device that enables integrative passive sampling of persistent, hydrophobic organic pollutants in water. The system combines the passive sampling with solventless preconcentration of organic pollutants from water and subsequent desorption of analytes on-line into a chromatographic system. Exchange kinetics of chemicals between water and MESCO was studied at different flow rates of water, in order to characterize the effect of variable environmental conditions on the sampler performance, and to identify a method for in situ correction of the laboratory-derived calibration data. It was found that the desorption of chemicals from MESCO into water is isotropic to the absorption of the analytes onto the sampler under the same exposure conditions. This allows for the in situ calibration of the uptake of pollutants using elimination kinetics of performance reference compounds and more accurate estimates of target analyte concentrations. A field study was conducted to test the sampler performance alongside spot sampling. A good agreement of contaminant patterns and water concentrations was obtained by the two sampling techniques.