Heavy metal concentrations in the surface marine sediments of Sfax Coast, Tunisia

Sixty-seven surface marine sediment samples in the <63 ?? m fraction collected from the coast of Sfax (Tunisia) were analyzed by inductively coupled plasma-atomic emission spectrometry for seven heavy metals (Pb, Ni, Cu, Cr, Zn, Cd, and Fe). Metal concentrations were compared with natural values, marine sediment quality standards, and also with other results concerning sediments from several Mediterranean coasts. The study of their spatial distributions refined by complementary approaches including principal component analysis, enrichment factors, and geoaccumulation index showed a significant impact of multiple anthropogenic sources. These included industrial sources and municipal discharges of the urban Sfax and also non-controlled discharges in rural zones close to the coastline. Moderate pollution of sediments, especially by Pb, Zn, and Ni, was shown to exist in localized sites. Besides, it was shown that other sites, slightly to highly enriched in terms of Cu, Cr, and Cd, are characterized by a quality of sediments varying from unpolluted to moderately polluted.     

Anthropogenic pollution and variability of manganese in alluvial sediments of the Yellow River,Ningxia, northwest China

Heavy metal pollution of sediments is a global concern and can be a serious problem in heavily industrialized parts of the world. Pollution by manganese is particularly common due to its ubiquitous natural occurrence, ease of mobilization, and extensive association with industry. In Ningxia, China, manganese pollution of Yellow River alluvial sediments was assessed by comparing manganese concentrations in 35 sediment samples with background values derived from similar sediments obtained at sites considered remote from potential sources of contamination. Natural background values of manganese were found to range from 192 to 323 mg/kg for surface sediments, and from 220 to 325 and 283 to 394 mg/kg for subsurface sediments at depths of 45–50 and 95–100 cm, respectively. In the study area, manganese content ranged from 565 to 1,363 mg/kg, indicating anthropogenic pollution extending to a depth of at least 1 m in the study area. All 35 samples were found to exceed the threshold effect concentration (TEC) of 460 mg/kg, below which adverse effects on sediment-dwelling organisms are not expected to occur, and one sample (T12) was found to exceed the probable effect concentration (PEC) of 1,100 mg/kg. PEC defines the threshold above which adverse effects are likely to be observed. Variogram analysis of the surface sediment manganese data revealed adherence to a Gaussian model, and ordinary kriging was used to generate a manganese distribution map. Analysis of the high nugget effect ratio indicates high, small-scale variations that are consistent with potential emissions from an adjacent electrolytic manganese plant.     

Assessment of Cu, Pb, and Zn contamination in sediment of north western Peninsular Malaysia by using sediment quality values and different geochemical indices

Surface sediments were collected from the north western aquatic area (13 intertidal sites and 5 river drainages) of Peninsular Malaysia, which were suspected to have received different anthropogenic sources. These sites included town areas, ports, fishing village, industrial areas, highway sides, jetties and some relatively unpolluted sites. The present study revealed that 4.79-32.91 μg/g dry weight for Cu, 15.85-61.56 μg/g dry weight for Pb, and 33.6-317.4 μg/g dry weight for Zn based on 13 intertidal surface sediments while those based on 5 river drainage surface sediments were 10.24-119.6 μg/g dry weight for Cu, 26.7-125.7 μg/g dry weight for Pb and 88.7-484.1 μg/g dry weight for Zn. In general, the metal levels in the drainage sediments are higher than in the intertidal sediments, suggesting dilution factor in the intertidal sediment and direct effluent from point sources in the drainage sediment. In particular, the total concentrations of Cu, Pb, and Zn for the sampling site at Kuala Kurau Town exceeded the Effect Range Median values for Cu, Pb, and Zn for assessments of sediment quality values for freshwater sediment as proposed by MacDonald et al. (Arch Environ Contam Toxicol 39:20-31, 2000), thus adverse biological effects would be observed above this level. Assessment using enrichment factor (using Fe as a normalizer) and geoaccumulation index showed that the three metals at Kuala Kurau Town and Juru Industry drainage were evidenced as having more enrichment and mostly due to non-natural sources. However, caution should be exercised that the interpretation can only become valid when the ratios, indices, and sediment quality values are combined. This is due to the fact that not all the established indices are applicable and, to a certain extent, some of them should be further revised and improved to suit a different metal for Malaysian sediment. Undoubtedly, sites near drainages at Kuala Kurau Town and Juru River Basin need greater attention to mitigate the heavy metal pollution in the future.     

Distribution of heavy metals in surface sediments from the South China Sea ecosystem, Malaysia

The concentrations of arsenic, cadmium, chromium, copper, mercury, nickel, lead and zinc in surface sediments collected from the east coast of peninsular Malaysia, along the South China Sea, were measured by two methods instrumental neutron activation analysis and inductively coupled plasma mass spectroscopy. The obtained results were use to determine the areal distribution of the metals of in the east coast of peninsular Malaysia and potential sources of these metals to this environment. The geochemical data propose that most of the metals found in the east coast of peninsular Malaysia constitute a redistribution of territorial materials within the ecosystem. Then, the metal concentrations can be considered to be present at natural background levels in surface sediments.     

Aliphatic and polycyclic aromatic hydrocarbons in the surface sediments of the Mediterranean: assessment and source recognition of petroleum hydrocarbons

Coastal marine sediment samples were collected from ten sampling stations along the Egyptian Mediterranean coast in April 2010. All sediment samples were analyzed for aliphatic (C7 to C34) and polycyclic aromatic hydrocarbons (PAHs) as well as total organic carbon (TOC) contents and grain size analysis. Total aliphatic hydrocarbons ranged from 1621.82 to 9069.99 ng/g (dry weight), while aromatic hydrocarbons (16 PAHs) varied between 208.69 and 1020.02 ng/g with an average of 530.68?±?225.86 ng/g?dwt. Good correlations observed between certain PAH concentrations allowed to identify its origin. The average TOC percent was varied from 0.13 to 1.46 %. Principal component analysis was used to determine the sources of hydrocarbon pollutants in sediments of Mediterranean. Additionally, special PAHs compound ratios suggest the petrogenic origins.     

Analysis of heavy metal concentrations in sediments of selected estuaries of Malaysia—a statistical assessment

Statistical analysis of heavy metal concentrations in sediment was studied to understand the interrelationship between different parameters and also to identify probable source component in order to explain the pollution status of selected estuaries. Concentrations of heavy metals (Cu, Zn, Cd, Fe, Pb, Cr, Hg and Mn) were analyzed in sediments from Juru and Jejawi Estuaries in Malaysia with ten sampling points of each estuary. The results of multivariate statistical techniques showed that the two regions have different characteristics in terms of heavy metals selected and indicates that each region receives pollution from different sources. The results also showed that Fe, Mn, Cd, Hg, and Cu are responsible for large spatial variations explaining 51.15% of the total variance, whilst Zn and Pb explain only 18.93 of the total variance. This study illustrates the usefulness of multivariate statistical techniques for evaluation and interpretation of large complex data sets to get better information about the heavy metal concentrations and design of monitoring network.     

Environmental assessment of polycyclic aromatic hydrocarbons in the surface sediments of a remote region on the eastern coast,Taiwan

Surface sediment samples were collected in He-Ping Harbor and the nearby He-Ping Estuary from 2005 to 2006 to examine spatial and temporal variability in polycyclic aromatic hydrocarbon (PAH) concentrations. The sum of the 16 USEPA priority pollutant PAHs varied from 8 to 312 ng/g dry weight, which was relatively low compared to values obtained from other studies in the world. Regarding temporal changes in the PAH profile, total PAH concentrations in the wet season were lower than during the dry season in He-Ping Harbor. However, the concentration of PAHs exhibited no significant difference in the four seasons in the He-Ping Estuary. PAH concentrations in He-Ping Harbor were higher than those in the He-Ping Estuary. In comparison with sediment quality guidelines, PAH concentrations of sediments in this study were lower than those outlined in the criteria, which suggests no evident adverse biological effects due to PAHs around the He-Ping coast. Ratios of specific PAH compounds calculated to assess the possible sources of PAHs reflect that PAHs in He-Ping Harbor may mainly be from pyrogenic coal combustion.     

Chemical Characteristics and Source Implications of Petroleum Hydrocarbon Contaminants in the Sediments near Major Drainage Outfalls along the Coastal of Laizhou Bay, Bohai Sea, China

The associated industrial and urban developments are located to a large extent along the Laizhou Bay, Bohai Sea coastal and raw sewage is often discharged into near shore waters with little treatment. To find out chemical characteristics and pollution source of the petroleum related contaminations in sediments near the major drainage outfalls located in the coastal, in this study, 10 surface sediment samples were collected during June. Sediment samples were extracted by organic solvents, separated by silica gel column chromatography and the concentrations and the profiles of n-alkane, biomarker and PAH in sediments were analyzed by gas chromatography-mass selective detector (GC-MSD). The use of several molecular markers and related indexes derived for n-alkane and PAHs has been proposed for assessing the relative contributions to the environment of hydrocarbon sources. As a result, n-alkanes reflect that the sea area of paper mill (Station ZZ08) is dominated by vascular plant. DY petroleum oil field and outer shore of the paper mill (Station ZZ02) have some degrees of petroleum related hydrocarbon contamination. Whereas the contamination of the sea area of TH River may be ascribed to different sources such as territorial non-point pollution source, domestic sewages, and stormwater runoff. Judged by their PAH ratios, the sediments near the paper mill (Station ZZ02) and the outer station of the oil field (Staion TH2) were pyrolytic. The estuary of Tiao River including the inner Station THX, TH10 and TH05 are petrogenic. The marine sediment near DY drainage outfall may have a mixture source of PAH both pyrolytic and petrogenic.     

Distribution of polycyclic aromatic hydrocarbons in marine sediments and their potential toxic effects

The presence of polycyclic aromatic hydrocarbons (PAHs) in samples of marine sediments from Paranagua Bay on the southern coast of Brazil was investigated. Paranagua Bay is the location of a major port, one of the busiest in Brazil. The region has a great potential for tourism and port-related industries and activities. Due to its characteristics as a venue for tourism, two major campaigns were planned: one 3 months before the summer (between December and February) and a second after the vacation season. Total concentration of PAHs in sediments ranged from 26.33 to 406.76 ng/g (in both campaigns). The highest values were found in sediments with higher organic carbon content. We found no substantial differences between the two campaigns, and the values are quite similar. Ternary diagrams show that points P5 and P6 were considered polluted, while others were classified as non-polluted. Molecular ratios indicate that the main sources of PAHs are petrogenic and the burning of fossil fuels. Sediment toxicity was assessed by the presence of PAHs in terms of benzo(a)pyrene (BaP) concentration. The toxicity of PAHs mixtures can be characterized more accurately by developing and establishing toxic equivalency factors (TEFs) for PAHs. Considering TEFs, the BaP_eq concentrations vary between 0.264 and 5.922 ng/g (considering both campaigns). Thus, two points are above the maximum level recommended (3 ng/g) by the Netherlands sediment quality guidelines. In fact, sites P5 and P6 apparently are exposed to a greater number of pollution sources, thus reflecting the higher concentration of PAHs compounds in sediments.     

Assessment of metal enrichments in tsunamigenic sediments of Pichavaram mangroves, southeast coast of India

The 26 December 2004-Tsunami has deposited sediments in the Pichavaram mangrove ecosystem, east coast of India. Ten surface and three core sediment samples were collected within thirty days of the event. High concentrations of Cd, Cu, Cr, Pb, and Ni were observed in the tsunamigenic sediments. With respect to Fe, Zn, and Mn, there was little variation as compared to pre-tsunami values. The geo-accumulation index was calculated in order to assess the contamination of heavy metals in the sediments. The sediments were extremely contaminated with respect to Cd and they showed moderate to strong contamination with respect to Cr, Pb and Ni. The study highlighted the future risk of enhanced metal pollution in near future in this mangrove ecosystem.     

Trace metals in the shells of blue mussels (Mytilus edulis) from the Poland coast of Baltic sea

The Odiel salt marshes (Marismas del Odiel) are an important nature area declared a Biosphere Reserve, but they are greatly affected by pollution from the Odiel River. Surface sediments from this area were analysed using the latest version of the BCR sequential extraction procedure to determine the fractionation of As, Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn among four geochemical phases (acid-soluble, reducible, oxidisable and residual). The total content of each of the metals and As was also determined. The results showed high concentrations of As, Cd, Cu, Pb and Zn, with maximums of 791 mg kg⁻¹ of As, 8.5 mg kg⁻¹ of Cd, 2,740 mg kg⁻¹ of Cu, 1,580 mg kg⁻¹ of Pb and 3,920 mg kg⁻¹ of Zn. The concentrations of Cr, Mn and Ni were low since there are no sources of pollution by them in the area. A comparison of the metal and As levels with the sediment quality guidelines showed that the pollution is sufficient to produce noxious effects in aquatic organisms in most of the Odiel salt marshes. Based on the chemical distribution of the elements, it was found that Cd and Zn were the most mobile (i.e., elements that can pass easily into the water under changing environmental conditions). However, Cr, Fe, Ni and As were present in the greatest percentages in the residual fraction, which implies that these elements are strongly linked to the sediments.     

Trace metals: Inputs, sedimentation and accumulation in San Vicente Bay, Chile

The present study deals with sediment dynamics affecting sediment-associated metal distributions in an embayment system experiencing pollution from coastal industries. Sedimentary metal content may originate from diagenetic processes of foundation rock on the bottom, allochthonous minerals from natural sources, and metals from industrial effluents along the coast. The study presents experimental estimations of quantities of metals entering the bay in industrial wastewater, measurements of metal content in particulate material captured in sediment traps, and metals distribution in surface sediments. Quantitative estimations of metals entering the system in industrial effluent showed the relation Pb Zn > Cu > Cr Ni > Cd. That of metals associated with particulate material from traps was Zn > Cr Cu > Pb > Ni > Cd and the abundance of metals in sediments was Zn > Cr > Cu > Pb > Ni > Cd. Finally, rates of bottom sediment accumulation are estimated in relation to the time of residence of water in the bay. The experimental data on sedimentation and sediment abundance were consistent with field observations on distribution and accumulation at sites of major sedimentation in this bay.     

Assessment of organic and inorganic contaminants in sediments of an urban tropical eutrophic reservoir

Although the Ibirité reservoir (an urban tropical eutrophic reservoir) has been the recipient of the discharge of a large volume of raw urban sewage, the key cause of ecosystem degradation has been historically solely attributed to the discharge of effluents from an oil refinery. This fact motivated an investigation to unravel the compositions of contaminants in the sediments to evaluate their distributions, possible sources, and potential impacts on sediment–water quality. The concentrations of polycyclic aromatic and aliphatic hydrocarbons and of metals and metalloids were, in general, significantly lower than some selected polluted sites used for comparison. Calculated distribution indexes showed that the hydrocarbon sources were petrogenic, pyrogenic, and biogenic. Only a few PAHs exceeded the threshold effects level (TEL) guideline. Industrial activities are the presumed sources of metals and metalloids except for copper, which is from copper sulfate used as algaecide in the reservoir. The bioavailable concentrations of some metal and metalloid exceeded the TEL–PEL guidelines. The acid volatile sulfide concentration was greater than that of the simultaneously extracted metals in the clayey–silty reservoir sediments, whereas the opposite result was observed for the sandy sediments of the tributaries. The sediment interstitial water toxic units were >1 for metals, thus indicating that metals are potentially toxic to the benthos. Considering the data set generated in this study, it can be concluded that the degradation of Ibirité reservoir and its tributaries cannot be solely attributed to the input of hydrocarbons, but predominantly to the discharge of raw urban sewage and effluents from other industrial sources.     

Composition and sources of aliphatic lipids and sterols in sediments of a tropical island, southern South China Sea: preliminary assessment

Near-shore surface sediment was collected from five stations off Redang Island located on the eastern coast of Peninsular Malaysia. Freeze-dried sediments were Soxhlet extracted and then fractionated using column chromatography into aliphatic and polar fractions. Determination of these fractions was carried out using gas chromatography mass spectrometry. The concentration of total resolved aliphatic hydrocarbons in sediments ranged from 157 to 308 ng/g. The distribution of aliphatic fraction showed the presence of n-alkanes ranging from nC15 to nC33 with a minor odd-to-even predominance exhibiting carbon maximum, depending on station, at nC17, nC26, nC29 or nC31. Calculation of Carbon Preference Index (CPI) for CPI_15–33 gave values ranging from 1.09 to 1.46. n-Alkanol in all sediment exhibits even-to-odd carbon predominance ranging from nC16 to nC28 and maximising at nC22. n-Fatty acids distribution ranged from nC14 to nC24 with a dominant maximum at nC16 and exhibiting high values of short chain fatty acids (≤nC20) to long chain fatty acids (>nC20) ratios. Unsaturated fatty acids, particularly nC16:1 and nC18:1 is also ubiquitous in all samples. Cholesterol is the most abundant compound amongst the sterol group ranging from 42.8 to 62.6 % of the total sterols. β-Sitosterol, brassicasterol and stigmasterol, are also present but of relatively lower amount. These observations suggest that the aliphatic lipids and sterols in the study area originate, mainly, from biogenic sources of marine microbial with minor contribution from epiticular waxes of terrestrial plants.     

Heavy metal assessment using geochemical and statistical tools in the surface sediments of Vembanad Lake, Southwest Coast of India

The geochemical distribution and enrichment of ten heavy metals in the surface sediments of Vembanad Lake, southwest coast of India was evaluated. Sediment samples from 47 stations in the Lake were collected during dry and wet seasons in 2008 and examined for heavy metal content (Al, Fe, Mn, Cr, Zn, Ni, Pb, Cu, Co, Cd), organic carbon, and sediment texture. Statistically significant spatial variation was observed among all sediment variables, but negligible significant seasonal variation was observed. Correlation analysis showed that the metal content of sediments was mainly regulated by organic carbon, Fe oxy-hydroxides, and grain size. Principal component analysis was used to reduce the 14 sediment variables into three factors that reveal distinct origins or accumulation mechanisms controlling the chemical composition in the study area. Pollution intensity of the Vembanad Lake was measured using the enrichment factor and the pollution load index. Severe and moderately severe enrichment of Cd and Zn in the north estuary with minor enrichment of Pb and Cr were observed, which reflects the intensity of the anthropogenic inputs related to industrial discharge into this system. The results of pollution load index reveal that the sediment was heavily polluted in northern arm and moderately polluted in the extreme end and port region of the southern arm of the lake. A comparison with sediment quality guideline quotient was also made, indicating that there may be some ecotoxicological risk to benthic organisms in these sediments.     

Occurrence and sorption properties of arsenicals in marine sediments

The content of total arsenic, the inorganic forms: arsenite (As(III)) and arsenate (As(V)), the methylated forms: monomethylarsonic acid and dimethylarsinic acid (DMA), trimethylarsenic oxide, tetramethylarsenonium ion and arsenobetaine was measured in 95 sediment samples and 11 pore water samples from the Baltic Sea near the island of Bornholm at depths of up to 100 m. As(III+V) and DMA were detected in the sediment and As(III+V) was detected in the sediment pore water. Average total As concentration of 10.6?±?7.4 mg/kg dry matter (DM) in the sediment corresponds to previously reported values in the Baltic Sea and other parts of the world. Existing data for on-site measurements of sorption coefficients (Kd) of arsenicals in marine and freshwater sediments show large variability from <1 to >1,000 L/kg. In this work, calculated sorption coefficients (Kd and Koc) for As(III+V) showed significant correlation with depth, dissolved oxygen (DO), salinity and sediment classification; for depths <70 m, salinity <11 %, DO >9 mg/L and sand/silt/clay sediments the Kd was 118?±?76 L/kg DM and for depths >70 m, salinity >11 %, DO?<?9 mg/L and muddy sediments the Kd was 513?±?233 L/kg DM. The authors recommend using the found Kd value for arsenic in marine sediments when conditions are similar to the Baltic Sea. At locations with significant anthropogenic point sources or where the local geology contains volcanic rock and sulphide mineral deposits, there may be significantly elevated arsenic concentrations, and it is recommended to determine on-site Kd values.     

Determination of toxic elements in waters and sediments from River Subin in the Ashanti Region of Ghana

Waters and sediments of Subin River, which flows through the industrial and commercial areas of Kumasi in the Ashanti region of Ghana, were geochemically investigated to ascertain heavy metal pollution levels due to anthropogenic activities. The study shows preoccupying pollution levels that constitute a threat to public and ecological systems. The waters of Subin River are neutral to slightly basic, inferred from pH values of 6.89–7.65). Electric conductivity (EC) of the waters ranges from 822 to 1,821 μs/cm and the range of total dissolved solids (TDS) is from 409 to 913 mg/l. Toxic elements contents of sediments and waters from 10 sites along the river were analysed by instrumental neutron activation analysis (INAA), and Al, As, Cd, Cr, Cu and Zn were determined. The concentrations of Al, As, Cd, Cr, Cu and Zn in the waters range between 4.02–15.18, 0.007–0.16, 0.002–0.05, 0.001–0.019, 1.32–7.04 and 4.28–10.2 mg/l, respectively. The contamination factors (CF) computed for the elements indicate that with the exception of sampling site S10, the sediments are polluted with Cd. Chromium contamination in the sediments is observed at S6 and S7, where the CF values were 1.39 and 1.52, respectively. The pollution load indices (PLI) were low (<1) and ranged from 0.14 to 0.75, suggesting that the overall sediment column of the river is not polluted.     

Chromatium species: an emerging bioindicator of crude oil pollution of tidal mud flats in the Niger Delta mangrove ecosystem, Nigeria

Establishing microbiological indices for the monitoring of environmental decay by crude oil pollution in the Niger Delta region has been a major concern of our current researches. Chromatium species, a purple, Gram positive pleomorphic, motile, microaerophlic sulfur bacterium offers a good potential for use in the assessment of the short term effects of oil pollution of tidal mud flats in the Niger Delta mangrove ecosystem. Its response to the November 22, 2003 spillage at the Qua Iboe Estuary and the adjoining Cross River Estuary was investigated. Our results have revealed that the sulphur bacterium is easily identified and widely distributed in the epipellic sediment of the mangrove ecosystem but very sensitive to hydrocarbon pollution. The bacterium was readily detected in the tidal mud flats containing as much as 2.0 mg kg(-1) but not detected in sediment with THC level of 3.65 mg kg(-1) and above. It is thus, suggestive that the threshold and lethal limits of effect of hydrocarbons against the sulfur bacterium lies between 2.04 and 3.65 mg kg(-1). These imply that in any case of crude oil pollution that Chromatium is not detected during monitoring the THC levels of the sediment may have been raised to a level close to or above 3.65 mg kg(-1). Statistical analysis of the relationship between THC level and density of Chromatium in sediment revealed a significant (p < 0.05) negative relationship (r = -0.85) in Qua Iboe mangrove ecosystem as against an insignificant (p > 0.05) relationship (r = -0.41) recorded for the Cross River mangrove ecosystem which served as the control. The result indicates that oil pollution affect the homeostatic status of Chromatium in tidal mud flats despite its even distribution (R2 = 71.4%). The finding though not definitive may contribute to the hierarchical process of oil pollution assessment in the Niger Delta region of Nigeria. However, its effective utilization will require not only the development of a selective medium for enumeration and isolation of the bacterium but also the establishment of a defined dose-response relationship under controlled conditions which requires further research.     

Polycyclic aromatic hydrocarbon contamination in stormwater detention pond sediments in coastal South Carolina

The purpose of this study was to characterize the polycyclic aromatic hydrocarbon (PAH) contamination in the sediments of stormwater detention ponds in coastal South Carolina. Levels of the sum of PAH analytes were significantly higher in the sediments of commercial ponds compared to that of reference, golf course, low-density residential, and high-density residential ponds. Isomer ratio analysis suggested that the predominant source of PAHs were pyrogenic; however, many ponds had a PAH signature consistent with mixed uncombusted and combusted PAH sources. PAH levels in these sediments could be modeled using both pond drainage area and pond surface area. These results demonstrate that the sediment from most commercial ponds, and a few residential and golf course ponds, were moderately contaminated with PAHs. PAH levels in these contaminated ponds exceeded between 42% and 75% of the ecological screening values for individual PAH analytes established by US EPA Region IV, suggesting that they may pose a toxicological risk to wildlife.     

Distribution and enrichment of acid-leachable heavy metals in the intertidal sediments from Quanzhou Bay, southeast coast of China

The article presents the distribution and enrichment of acid-leachable heavy metals (ALHMs) Cu, Zn, Pb, Cr, Mn, and Fe in the intertidal sediments collected from Quanzhou Bay, southeast coast of China. The contents of ALHMs along with sediment texture, total organic carbon, S^2???, and CaCO₃ in surface sediments were analyzed to identify the input of heavy metals from various sources. The enrichment of ALHMs in the sediments is mainly attributed to the intense industrial activities around Quanzhou Bay and to the serried activities of intertidal breed aquatics along the seacoast. The results also illustrate the association between the ALHMs with the finer fractions, organic matter, and Fe oxyhydroxides in the sediments. The above results were very supported by the multivariate statistical analyses, including correlation, principal component analysis, and hierarchical clustering analysis. Comparative results of ALHMs in the intertidal sediments from Quanzhou Bay with those in other domestic bays and estuaries indicate that the study area has been enriched with heavy metals, especially with Zn, Cu, and Pb, during the past few decades. The results of the present study suggest that the authorities should pay attention to the current status and take some measures to control the heavy metal pollution in the study area.