H₂-rich syngas production by fluidized bed gasification of biomass and plastic fuel

This paper reports the results of gasification tests using a catalytic fluidized bed gasifier to obtain a H₂-rich stream by feeding different pellets made of wood, biomass/plastic and olive husks to the gasifier. The effects of both the steam supply and an in-bed catalyst on gasifier performance have been investigated. In general, pelletization was an effective pre-treatment for improving the homogeneity of the fuel and the reliability of the feeding devices. The use of biomass/plastic pellets in a catalyst bed yielded good results in terms of the hydrogen concentration (up to 32% vol.), even if an increase in tar production and in the fine/carbon elutriation rate was observed in comparison with wood pellets.     

Use of recycled plastics in wood plastic composites – A review

The use of recycled and waste thermoplastics has been recently considered for producing wood plastic composites (WPCs). They have great potential for WPCs manufacturing according to results of some limited researches. This paper presents a detailed review about some essential properties of waste and recycled plastics, important for WPCs production, and of research published on the effect of recycled plastics on the physical and mechanical properties of WPCs.     

Formation characteristics of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, and coplanar PCBs in fly ash from a gasification–melting process of municipal solid waste

PCDDs/DF and Co-PCB (dioxin) formations were studied with ash from a newly developed gasification and melting process for municipal solid waste. Ash samples were heated in a laboratory-scale fixed-bed reactor. Emphasis was placed on the effects of the type and composition of ash, temperatures, gas residence time, and gaseous organic precursors. Investigations using macroscopic and homologue distribution analyses led to the following conclusion. The ash from the gasification–melting process had the ability to generate dioxins in flue gas. A possible carbon source is unburned carbon in the ash samples, although this was very low (less than 0.01%). An experimental result that the level of dioxins generated from preheated fly ash obtained from a conventional incinerator was much lower than that from nonheated fly ash supported this conclusion. Dioxin concentrations obviously showed temperature dependence and peaked at 350°C. Dioxins formed in a gasification–melting process ash were readily desorbed from the surface, probably because of the low carbon content of the ash. There was no experimental evidence that gaseous organic precursors fed to the reactor generated dioxins. Therefore, an organic precursor was not essential for the formation of dioxins. A good linear relationship obtained between PCDDs/DFs and gas residence time also supported the assumption. Received: February 14, 2000 / Accepted: June 30, 2000     

The in situ treatment of PFAS within porewater at the air–water interface of a PFAS source zone

The treatment of per- and polyfluoroalkyl substances (PFAS) within groundwater is an emerging topic, with various technologies being researched and tested. Currently, PFAS-impacted groundwater is typically treated ex situ using sorptive media such as activated carbon and ion exchange resin. Proven in situ remedial approaches for groundwater have been limited to colloidal activated carbon (CAC) injected into aquifers downgradient of the source zones. However, treatment of groundwater within the source zones has not been shown to be feasible to date. This study evaluated the use of CAC to treat dissolved PFAS at the air–water interface within the PFAS source zone. Studies have shown that PFAS tends to preferentially accumulate at the air–water interface due to the chemical properties of the various PFAS. This accumulation can act as a long-term source for PFAS, thus making downgradient treatment of groundwater a long-term requirement. A solution of CAC was injected at the air–water interface within the source zone at a site with PFAS contamination using direct push technology. A dense injection grid that targeted the interface between the air and groundwater was used to deliver the CAC. Concentrations of PFAS within the porewater and groundwater were collected using a series of nine lysimeters installed within the vadose and saturated water columns. A total of six PFAS were detected in the porewater and groundwater including perfluorobutanoic acid (PFBA), perfluoropentanoic acid (PFPeA), perfluorohexanoic acid (PFHxA), perfluoroheptanoic acid (PFHpA), perfluorooctanoic acid (PFOA), and perfluorononanoic acid (PFNA). Detectable concentrations of PFAS within the pore and groundwater before treatment ranged from values greater than 300 µg/L for PFPeA to less than 3 µg/L for PFNA. Following the injection of the CAC, monitoring of the porewater and groundwater for PFAS was conducted approximately 3, 6, 9, 12, and 18 months postinjection. The results indicated that the PFAS within the porewater and groundwater at and near the air–water interface was effectively attenuated over the 1.5-year monitoring program, with PFAS concentrations being below the method detection limits of approximately 10 ng/L, with the exception of PFPeA, which was detected within the porewater during the 18-month sampling event at concentrations of up to 55 ng/L. PFPeA is a five carbon-chained PFAS that has been shown to have a lower affinity for sorption onto activated carbon compared to the longer carbon-chained PFAS such as PFOA. Examination of aquifer cores in the zone of injection indicated that the total organic carbon concentration of the aquifer increased by five orders of magnitude postinjection, with 97% of the samples collected within the target injection area containing activated carbon, indicating that the CAC was successfully delivered into the source zone.     

The value of composting in Germany – Economy,ecology, and legislation

Based on a recent survey of German composting plants an evaluation of costs and benefits of composting was attempted. In this regard, several economical, ecological and legal aspects and some interrelations are discussed in this paper. A special emphasis is placed on the fees and compost prices of composting plants. It is also shown how the legal framework provides the economic basis for composting in Germany, how economical and ecological costs and benefits could be assessed, and why it is so difficult to determine the value of composting.     

Air–Soil Exchange of NO,NO2 and O3 in Forests

The exchange of NO, NO₂ and O₃ at the soil surface wasmeasured with automatic dynamic chambers in a spruce forest and in abeech forest during periods of several months.NO was emitted from the soil at a rate of0–8 ng N m^-2 s^-1(spruce) and 0–15 ng Nm^-2 s^-1(beech), but there was no simple relationship between the flux andeither soil temperature or soil moisture. NO₂ and O₃ weredeposited at the soil surface. Deposition velocities forNO₂were on average 0.3 mm s^-1 (spruce) and 0.1 mms^-1(beech), and the deposition velocities of O₃ were on average 1.6 mm s^-1 (spruce) and 1.4 mm s^-1 (beech). The depositionvelocity of O₃ is fairly constant whereas the deposition velocityof NO₂ varies greatly, but the reasons remain to be investigated.     

Characteristics of NO2 Pollution in the City of Gothenburg, South-West Sweden—Relation to NO x and O3 Levels, Photochemistry and Monitoring Location

Concentrations of NO₂, NO, and O₃ from a rooftop monitoring station in Gothenburg, Sweden (2002–2006) were analysed to characterise NO₂ pollution. [NO₂] was shown to correlate strongly and non-linearly with [NO _x ] (NO _x ?=?NO?+?NO₂), in line with observations in other cities. The [NO₂] to [NO _x ] fraction fell initially with increasing [NO _x ]. At [NO _x ] levels >200 ppb, the decline in [NO₂]/[NO _x ] with increasing [NO _x ] levelled out and [NO₂]/[NO _x ] converged towards approximately 0.15–0.16, independent of [NO _x ]. Data from a traffic route site showed the same pattern. This value of [NO₂]/[NO _x ] at high [NO _x ] can be interpreted as the NO₂ fraction of the NO _x emissions from vehicle exhaust. Situations with high NO _x pollution and minimum [NO₂]/[NO _x ] were always associated with [O₃] close to zero. Plotting [Ox] (Ox?=?NO₂?+?O₃) vs. [NO _x ] provided a strong linear correlation for situations dominated by local pollution ([NO]/[NO₂]>1). The slope of the regression, a measure of the primary NO₂ fraction in NO _x emissions, was 0.13 during the day and 0.14 during the night. With stronger winds, the rooftop monitoring station became more similar, in terms of NO₂ pollution, to a city street site and a traffic route site, although [NO₂] was almost always higher at the street/traffic route locations. The EU standard for the annual average of [NO₂] (40 μg m^?3) was exceeded, while the hourly standard (200 μg m^?3, not to be exceeded more than 18 times per year by 2010) was not exceeded at any of the sites.     

Characterization and determination of the odorous charge in the indoor air of a waste treatment facility through the evaluation of volatile organic compounds (VOCs) using TD–GC/MS

Municipal solid waste treatment facilities are generally faced with odorous nuisance problems. Characterizing and determining the odorous charge of indoor air through odour units (OU) is an advantageous approach to evaluate indoor air quality and discomfort. The assessment of the OU can be done through the determination of volatile organic compounds (VOCs) concentrations and the knowledge of their odour thresholds. The evaluation of the presented methodology was done in a mechanical–biological waste treatment plant with a processing capacity of 245.000 tons year^?1 of municipal residues. The sampling was carried out in five indoor selected locations of the plant (Platform of Rotating Biostabilizers, Shipping warehouse, Composting tunnels, Digest centrifugals, and Humid pre-treatment) during the month of July 2011. VOC and volatile sulphur compounds (VSCs) were sampled using multi-sorbent bed (Carbotrap, Carbopack X, Carboxen 569) and Tenax TA tubes, respectively, with SKC AirCheck 2000 pumps. The analysis was performed by automatic thermal desorption (ATD) coupled with a capillary gas chromatography (GC)/mass spectrometry detector (MSD). One hundred and thirty chemical compounds were determined qualitatively in all the studied points (mainly alkanes, aromatic hydrocarbons, alcohols, aldehydes, esters, and terpenes), from which 86 were quantified due to their odorous characteristics as well as their potentiality of having negative health effects. The application of the present methodology in a municipal solid waste treatment facility has proven to be useful in order to determine which type of VOC contribute substantially to the indoor air odorous charge, and thus it can be a helpful method to prevent the generation of these compounds during the treatment process, as well as to find a solution in order to suppress them.     

Material cycle, waste disposal, and recycling in a Leontief–Sraffa–von Neumann economy

The purpose of this paper is to analyze problems concerning household waste disposal and material flow by means of a Leontief–Sraffa–von Neumann framework. We treat household residuals as if they were traded and valued in a daily market transaction. Thus, we can calculate the shadow price of waste, making a value system compatible with a quantity system. We show the theoretical existence of an equilibrium solution between a value system and a quantity system. This means that if there is a well-organized market for waste treatment, the flow of waste is smoothly regulated by a price adjustment mechanism. Household residuals are shown to be negatively valued if a certain constraint is satisfied. Thus, those residuals are bads instead of goods. Interestingly enough, household waste treatment in the market does not affect the price formation of normal commodities, since waste treatment services or recycling services are nonbasics in Sraffa's sense. Partly due to this character, the Hawkins–Simon condition is required only for normal production sectors, and not for recycling sectors. In the final section, we have dropped the assumption that household residuals are always treated as waste, since some residuals may be traded as normal commodities. Applying the Gale–Nikaido–Debreu lemma to a newly defined excess demand function, we have proved that our model can accommodate such a situation. By this analysis, we have shown that the goods/bads (waste) relationship is a relative matter, being dependent upon economic conditions. The changes in demand for, or supply of, residuals may turn some goods into bads, and vice versa. Received: October 5, 1999 / Accepted: October 18, 1999     

Use of recycling stations in Borlänge, Sweden--volume weights and attitudes

This paper presents a study of recycling stations in the municipality of Borl?nge, Sweden. The main objectives were to measure volume weights of recyclables, to facilitate future planning of collection intervals and bin/container volume, and to investigate the general attitudes among the public towards waste management in general and recycling stations in particular. Volume weights measured in bins/containers were: paper/newsprint: 297 kg/m3, glass packaging: 297 kg/m3, metal packaging: 81.7 kg/m3, paper packaging: 27.8 kg/m3, plastic packaging: 28.1 kg/m3. The recycling stations have been in use since 1994. Most visitors (90%) arrived by car but said the visit to the recycling station was not the main purpose of the trip. The results from the interviews indicated that the people who use the recycling stations have found ways to incorporate waste sorting into their everyday lives, with the help of information, design of the collection system and environmental concerns.     

Critical Loads and Exceedances of Acid Deposition and Associated Forest Growth in the Northern Hardwood and BorealConiferous Forests in Québec,Canada

We used the Québec forest monitoring network (`Réseaud'Étude et de Surveillance des Écosystèmes Forestiers' or RESEF)along with its atmospheric monitoring stations to assess criticalS and N loads and their combined soil acidification exceedancesfor natural ecosystems of the northern hardwood and borealconiferous forests in Québec, Canada. Critical loads (CL) forforest soil acidification were calculated using the simple mass-balance (SMB) approach and with the steady-state PROFILE model.Atmospheric deposition rates for water, S, N, Ca, Mg, Na, and K,for the years 1989–1993, and detailed, plot-specific forest andsoil characteristics were used as input. The SMB model alsorequired information regarding nutrient uptake and storage in theaboveground woody biomass. The CL calculations indicated that,from the 31 RESEF plots, 18 received atmospheric acidic inputs inexcess of their CL (55 and 61% of the hardwood and coniferousplots, respectively). The range of CL exceedance varied from 60to 470 eq ha^-1 yr^-1 for the hardwood stands, and from 10to 590 eq ha^-1 yr^-1 for the coniferous stands. The standswith CL exceedance were mainly located in the western and centralpart of the province. Stand growth associated with exceedanceclass of acidity was determined using the RESEF plots along withselected permanent forest survey plots having similar sitecharacteristics, but for which longer growth records wereavailable. We found a significant negative correlation betweenforest growth rates and critical soil acidification exceedancefor both the northern hardwood and the boreal conifer sites.Specifically, plots with critical load exceedances were found tohave a growth reduction of about 30% during the 1974–1982 andthe 1972–1990 measurement (plots with no soil acidificationexceedance served as a control). While this correlation is notnecessarily causal, it is nevertheless consistent with theexpectation that increased losses of soil base cations on accountof increased soil acidification should and could lead todeteriorating forest health conditions.     

The introduction of recycled-aggregate concrete specifications in Japan and the research into the freezing–thawing resistance of recycled-aggregate concrete

Journal of Material Cycles and Waste Management - In Japan, recycled concrete aggregate (RCA) and recycled-aggregate concrete (RAC) are standardized in the Japanese Industrial Standards (JIS) A...     

University students’ awareness of e-waste and its disposal practices in Pakistan: a construction of the conceptual framework

Journal of Material Cycles and Waste Management - Pakistan is among the few countries generating and receiving enormous e-waste, which posits a threat to its future generations. A...     

Barriers for implementation of “waste to energy” in developing and transition countries: a case study of Serbia

The aim of this study is to assess boundaries and potential for implementation of waste-to-energy projects in developing and transition countries in order to give realistic future directions for waste-to-energy initiatives. For this purpose, Serbia is taken as an example. In order to highlight the most important issues, which hinder the feasibility of waste-to-energy projects, analysis of the status quo of Serbian municipal solid waste management is performed. In addition, based on the current political and social status of the country, the most important factors that need to be solved as a precondition to waste-to-energy projects are defined. This analysis revealed that aside from technical factors, sociopolitical and cultural obstacles must be eliminated as a prerequisite for successful implementation of waste-to-energy projects. We define the most sustainable pathway for waste-to-energy initiatives in Serbia as well as other similar developing and transition countries, which can complement development of the entire waste management system.     

Possibilities and limitations of life cycle assessment (LCA) in the development of waste utilization systems – Applied examples for a region in Northern Germany

Against the background of increasing concerns about climate change, the reduction of greenhouse gas emissions has become an integral part of processes in both the waste management and the energy industries. This is reflected in the development of new waste treatment concepts, in which domestic and commercial waste is treated with the aim of utilizing its energy content, while at the same time recycling as much of its material content as possible. Life cycle assessment (LCA) represents a method of assessing the environmental relevance of a waste management system, the basis of which is a material flow analysis of the system in question. GHG emissions from different options for thermal treatment and energy recovery from waste as applied to a region in Northern Germany have been analyzed by the LCA approach and an indicative LCA, which only considers those emissions resulting from operating stages of the system. Operating stages have the main share of emissions compared to pre-processing stages. Results show that through specific separation of waste material flows and highly efficient energy recovery, thermal treatment and energy generation from waste can be optimized resulting in reduction of emissions of greenhouse gases. There are also other areas of waste utilization, currently given little attention, such as the solar drying of sewage sludge, which can considerably contribute to the reduction of greenhouse gas emissions.     

Assessment of medical waste management at a primary health-care center in São Paulo,Brazil

According to the Brazilian law, implementation of a Medical Waste Management Plan (MWMP) in health-care units is mandatory, but as far as we know evaluation of such implementation has not taken place yet. The purpose of the present study is to evaluate the improvements deriving from the implementation of a MWMP in a Primary Health-care Center (PHC) located in the city of São Paulo, Brazil. The method proposed for evaluation compares the first situation prevailing at this PHC with the situation 1 year after implementation of the MWMP, thus allowing verification of the evolution of the PHC performance. For prior and post-diagnosis, the method was based on: (1) application of a tool (check list) which considered all legal requirements in force; (2) quantification of solid waste subdivided into three categories: infectious waste and sharp devices, recyclable materials and non-recyclable waste; and (3) identification of non-conformity practices. Lack of knowledge on the pertinent legislation by health workers has contributed to non-conformity instances. The legal requirements in force in Brazil today gave origin to a tool (check list) which was utilized in the management of medical waste at the health-care unit studied. This tool resulted into an adequate and simple instrument, required a low investment, allowed collecting data to feed indicators and also conquered the participation of the unit whole staff. Several non-conformities identified in the first diagnosis could be corrected by the instrument utilized. Total waste generation increased 9.8%, but it was possible to reduce the volume of non-recyclable materials (11%) and increase the volume of recyclable materials (4%). It was also possible to segregate organic waste (7%), which was forwarded for production of compost. The rate of infectious waste generation in critical areas decreased from 0.021 to 0.018 kg/procedure. Many improvements have been observed, and now the PHC complies with most of legal requirements, offers periodic training and better biosafety conditions to workers, has reduced the volume of waste sent to sanitary landfills, and has introduced indicators for monitoring its own performance. This evaluation method might subsidize the creation and evaluation of medical waste management plans in similar heath institutions.