Effects of Cu2+, Pb2+ and Zn2+ on voltage-activated currents in Helix pomatia L. Neurons

Effects of Cu²⁺, Pb²⁺ and Zn²⁺ were studied on voltage-activated Na-, Ca-, and K-currents in snail neurons. It was found that: 1. In normal physiological saline Cu²⁺, Pb²⁺ and Zn²⁺ ions exerted complex changes on the total ionic currents; 2. All three metal ion have depressed the inward Na-currents but with different K _D , moreover Pb ²⁺ increased Na-current at low concentrations (5 M); 3. The inward Ca-current was also reduced. The sequence of the blocking effect of metals was different: Pb>Cu>Zn, however the steady-state inactivation was influenced only by Cu²⁺; 4. Outward currents were decreased in all neurons by Cu²⁺, but the effects of Pb²⁺ and Zn²⁺ were either depression or enhancement in different indentified neurons; 5. The possibility of binding heavy metals to wide variety of membrane proteins and the observed effects on different ionic channels suggest that the metal effect is complex and cannot be taken as a specific one to a single channel type or site of location.     

Biosorption properties of Morus alba L. for Cd (II) ions removal from aqueous solutions

The abundantly available industrial waste product Morus alba L. pomace (MAP) is one of the cost-effective biosorbent for removal of metal ions from aqueous solutions. Hence, in the present study, we aimed to test the ability of MAP to remove Cd(II) ions through batch biosorption process. Firstly, MAP was characterized using several techniques, and then the influence of various experimental parameters such as initial pH of the aqueous solution, initial Cd(II) concentration, contact time, MAP concentration, and temperature were evaluated upon the biosorption process. It was found that the maximum uptake of Cd(II) ions occurred at initial pH 6.0 and optimum contact time was observed as 60 min. Cd(II) ions adsorption on MAP analyzed by the Langmuir and Freundlich isotherm models and the maximum monolayer biosorption capacity of MAP was found to be 21.69 mg?g^?1 by using the Langmuir isotherm model. The pseudo-first-order, pseudo-second-order, Elovich, and intraparticle diffusion models were employed to describe the biosorption kinetics. In order to investigate the thermodynamic properties of the biosorption process, the changes in the Gibbs free energy (?G), enthalpy (?H), and entropy (?S) were also evaluated and it has been concluded that the process was feasible, spontaneous, and endothermic in the temperature range of 5–40 °C.     

Prevalence of heavy metal resistance in bacteria isolated from tannery effluents and affected soil

In the present study, a total of 198 bacteria were isolated, 88 from the tannery effluents and 110 from agricultural soil irrigated with the tannery effluents. Tannery effluents and soils were analyzed for metal concentrations by atomic absorption spectrophotometer. The tannery effluents and soil samples were found to be contaminated with chromium, nickel, zinc, copper, and cadmium. All isolates were tested for their resistance against Cr^6?+?, Cr^3?+?, Ni^2?+?, Zn^2?+?, Cu^2?+?, Cd^2?+?, and Hg^2?+?. From the total of 198 isolates, maximum bacterial isolates were found to be resistant to Cr^6?+? 178 (89.9%) followed by Cr^3?+? 146 (73.7%), Cd^2?+? 86 (43.4%), Zn^2?+? 83 (41.9%), Ni^2?+? 61 (30.8%), and Cu^2?+? 51 (25.6%). However, most of the isolates were sensitive to Hg^2?+?. Among the isolates from tannery effluents, 97.8% were resistant to Cr^6?+? and 64.8% were resistant to Cr^3?+?. Most of the soil isolates were resistant against Cr^6?+? (83.6%) and Cr^3?+? (81.8%). All isolates were categorized into Gram-positive and Gram-negative bacteria. In a total of 114 Gram-positive isolates, 91.2% were resistant to Cr^6?+? followed by 73.7% to Cr^3?+?, 42.1% to Zn^2?+?, 40.4% to Cd^2?+?, and 32.5% to Ni^2?+?. Among Gram-negative isolates, 88.1% were found showing resistance to Cr^6?+?, 75.0% to Cr^3?+?, and 47.6% were resistant to Cd^2?+?. Majority of these metal-resistant isolates were surprisingly found sensitive to the ten commonly used antibiotics. Out of 198 isolates, 114 were found sensitive to all antibiotics whereas only two isolates were resistant to maximum eight antibiotics at a time. Forty-one and 40 isolates which constitute 20.7% and 20.2% were resistant to methicilin and amoxicillin, respectively.     

多元线性回归-分光光度法测定电镀排放废水中重金属

采用多元线性回归-分光光度法进行电镀排放废水中Cr³⁺、Ni²⁺、Zn²⁺的同时测定研究。以4-(2-吡啶偶氮)间苯二酚(PAR)为显色剂,探索了同时测定模拟电镀废水中Cr³⁺、Ni²⁺、Zn²⁺的实验方法,建立多元线性回归模型。根据实际电镀排放废水中Cr³⁺、Ni²⁺、Zn²⁺的质量浓度分布调查结果,设计了测定较低和较高浓度范围2种模型,分别对应不同水质波动程度的电镀企业废水,前者浓度范围设置基本覆盖大多数实际电镀排放废水中Cr³⁺、Ni²⁺、Zn²⁺的浓度,且具有较高精度。测定浓度范围较小模型对应水质波动较小的电镀排放废水,模型中Cr³⁺、Ni²⁺、Zn²⁺的质量浓度分别为0.32～0.44、0.32～0.50、0.72～0.84 mg/L,平均相对误差MR...     

31P-NMR evaluation of organophosphorus pesticides degradation through metal ion promoted hydrolysis

The degradation of some organophosphorus pesticides (OPPs) in the presence of metal ions was studied by ³¹P-NMR spectroscopy. Both ³¹P-NMR and gas chromatography/mass spectroscopy results were used in order to determine the nature of metabolites formed after degradation. The degraded organophosphorus pesticide were investigated for chlorpyrifos and phoxim in the presence of several metal ions including Hg²⁺, Cu²⁺, Cd²⁺, Ni²⁺, Pb²⁺, and Ag⁺. ³¹P-NMR results indicated Ag⁺ and Hg²⁺ ion promoted degradation of OPPs and other metal ions formed complex with OPPs and cannot degrade OPPs. We found that the degradation of chlorpyrifos and phoxim with Ag⁺ or Hg²⁺ led to the formation of O,O-diethyl-O-methyl phosphorothionate, (C₂H₅O)₂(CH₃O)PS, at metal ion/pesticide mole ratios ≤1.0 and completely decomposed at a higher mole ratio of 10. Finally, the method was successfully applied to the degradation study of a number of technical and formulated pesticides in the presence of Ag⁺ ion at a metal ion/pesticide mole ratio of 10.     

Nickel(II) biosorption from aqueous solutions by shrimp head biomass

The present study evaluates the capacity of shrimp (Farfantepenaeus aztecus) head to remove toxic Ni(II) ions from aqueous solutions. Relevant parameters that could affect the biosorption process, such as shrimp head pretreatment, solution pH level, contact time and initial Ni(II) concentration, were studied in batch systems. An increase in Ni(II) biosorption capacity and a reduction in the time required to reach Ni(II) biosorption equilibrium was manifested by shrimp head biomass pretreated by boiling in 0.5 N NaOH for 15 min; this biomass was thereafter denominated APSH. The optimum biosorption level of Ni(II) ions onto APSH was observed at pH 7.0. Biosorption increased significantly with rising initial Ni(II) concentration. In terms of biosorption dynamics, the pseudo-second-order kinetic model described Ni(II) biosorption onto APSH best. The equilibrium data adequately fitted the Langmuir isotherm model within the studied Ni(II) ion concentration range. According to this isotherm model, the maximum Ni(II) biosorption capacity of APSH was 104.22 mg/g. Results indicate that APSH could be used as a low-cost, environmentally friendly, and promising biosorbent with high biosorption capacity to remove Ni(II) from aqueous solutions.     

Incidence of metal and antibiotic resistance in Pseudomonas spp. from the river water, agricultural soil irrigated with wastewater and groundwater

A total of 144 isolates of Pseudomonas spp. (48 each from the Yamuna River water, wastewater irrigated soil and groundwater irrigated soil) were tested for their resistance against certain heavy metals and antibiotics. Minimum inhibitory concentrations (MICs) of Hg^2?+?, Cd^2?+?, Cu^2?+?, Zn^2?+?, Ni^2?+?, Pb^2?+?, Cr^3?+? and Cr^6?+? for each isolate were also determined. A maximum MIC of 200 ??g/ml for mercury and 3,200 ??g/ml for other metals were observed. The incidences of metal resistance and MICs of metals for Pseudomonas isolates from the Yamuna water and wastewater irrigated soil were significantly different to those of groundwater irrigated soil. A high level of resistance against tetracycline and polymyxin B (81.2%) was observed in river water isolates. However, 87.5% of Pseudomonas isolates from soil irrigated with wastewater showed resistance to sulphadiazine, whereas 79.1% were resistant to both ampicillin and erythromycin. Isolates from soil irrigated with groundwater exhibited less resistance towards heavy metals and antibiotics as compared to those of river water and wastewater irrigated soil. Majority of the Pseudomonas isolates from water and soil exhibited resistance to multiple metals and antibiotics. Resistance was transferable to recipient Escherichia coli AB2200 strains by conjugation. Plasmids were cured with the curing agent ethidium bromide and acridine orange at sub-MIC concentration.     

On-site solid-phase extraction and application to in situ preconcentration of heavy metals in surface water

An on-site solid-phase extraction, consisting of the sorption, the separation and the elution function units, was designed for in situ preconcentration of heavy metals ions. The D401 resin powder was employed as sorbent to capture Pb²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Co²⁺, and Ni²⁺, and then they desorbed with 2 mol/L nitric acid as eluent. Under the optimized conditions, these heavy metals ions in West Lake, Taihu Lake, and Yangtze River of China were captured and then determined by ICP-OES with the recovery of 92.5% to 111.5%. The on-site solid-phase extraction achieved a quick preconcentration of heavy metals to avoid the transport and storage of a large volume water sample. It is suitable for in situ monitoring of water quality in mountains, tablelands or other remote areas.     

Adsorption studies and the removal of dissolved metals using pyrolusite as adsorbent

The adsorption of metals from aqueous solutions of Pb²⁺, Zn²⁺ and Mg²⁺ on naturally occurring pyrolusite have been studied. The chemical stability of the pyrolusite has been determined in NaOH, H₂SO₄, HNO₃, HCl, NaCl and NK₄Cl solutions of various concentrations. Adsorption of the metal ions followed the order Pb²⁺>Zn²⁺>Cd²⁺.The maximum adsorption of Pb²⁺ (100%) occurred at pH 7. the relation between the amount of Pb²⁺ adsorbed per unit weight of pyrolusite and the concentration of Pb²⁺ at equilibrium follows the Freundlich adsorption isotherm.The efficiency of pyrolusite has been demonstrated by removing lead from synthetic waste water. 100% and 96% removal of lead have been achieved from synthetic waste water containing 5 mg l^–1 and 120 mg l^–1 of Pb²⁺ respectively at pH 7. The results of these studies suggest that pyrolusite might provide an economical method for the removal of lead from industrial waste water.     

A new <Emphasis Type="Italic">P. putida</Emphasis> instrumental toxicity bioassay

Here, we present a new toxicity bioassay (CO₂-TOX), able to detect toxic or inhibitory compounds in water samples, based on the quantification of Pseudomonas putida KT2440 CO₂ production. The metabolically produced CO₂ was measured continuously and directly in the liquid assay media, with a potentiometric gas electrode. The optimization studies were performed using as a model toxicant 3,5-DCP (3,5-dichlorophenol); later, heavy metals (Pb²⁺, Cu²⁺, or Zn²⁺) and a metalloid (As⁵⁺) were assayed. The response to toxics was evident after 15 min of incubation and at relatively low concentrations (e.g., 1.1 mg/L of 3,5-DCP), showing that the CO₂-TOX bioassay is fast and sensitive. The EC₅₀ values obtained were 4.93, 0.12, 6.05, 32.17, and 37.81 mg/L for 3,5-DCP, Cu²⁺, Zn²⁺, As⁵⁺, and Pb²⁺, respectively, at neutral pH. Additionally, the effect of the pH of the sample and the use of lyophilized bacteria were also analyzed showing that the bioassay can be implemented in different conditions. Moreover, highly turbid samples and samples with very low oxygen levels were measured successfully with the new instrumental bioassay described here. Finally, simulated samples containing 3,5-DCP or a heavy metal mixture were tested using the proposed bioassay and a standard ISO bioassay, showing that our test is more sensible to the phenol but less sensible to the metal mixtures. Therefore, we propose CO₂-TOX as a rapid, sensitive, low-cost, and robust instrumental bioassay that could perform as an industrial wastewater-process monitor among other applications.     

Multiple metal tolerance and biosorption of cadmium by Candida tropicalis isolated from industrial effluents: glutathione as detoxifying agent

The ability of cadmium uptake by metal-resistant yeast, Candida tropicalis, from the liquid medium and wastewater was evaluated. The minimum inhibitory concentration of Cd^2?+? against C. tropicalis was 2,500 mg L^???1. The yeast also showed tolerance toward Zn^2?+? (1,400 mg L^???1), Ni^2?+? (1,000 mg L^???1), Hg^2?+? (1,400 mg L^???1), Cu^2?+? (1,000 mg L^???1), Cr^6?+? (1,200 mg L^???1), and Pb^2?+? (1,000 mg L^???1). The yeast isolate showed typical growth curves, but lag and log phases extended in the presence of cadmium. The yeast isolate showed optimum growth at 30°C and pH 8. The metal processing ability of the isolate was determined in a medium containing 100 mg L^???1 of Cd^2?+?. C. tropicalis could decline Cd^2?+? 70%, 85%, and 92% from the medium after 48, 96, and 144 h, respectively. C. tropicalis was also able to remove Cd^2?+? 40% and 78% from the wastewater after 6 and 12 days, respectively. Cd produced an increase in glutathione (GSH) and nonprotein thiol levels by 135% and 134% at 100-mg L^???1 concentration, respectively. An increase in the synthesis of GSH is involved in metal tolerance, and the presence of increasing GSH concentrations may be a marker for high metal stress in C. tropicalis. C. tropicalis, which is resistant to heavy metal ions and is adaptable to the local environmental conditions, may be employed for metal detoxification operations.     

Five-year monitoring study of chemical characteristics of Wet atmospheric precipitation in the southern region of Jordan

Wet atmospheric samples were collected from different locations in the southern region of Jordan during a 5-year period (October 2006 to May 2011). All samples were analyzed for pH, EC, major ions (Ca²⁺, Mg²⁺, Na⁺, K⁺, HCO₃ ^?, Cl^?, NO₃ ^?, and SO₄ ^2?), and trace metals (Fe²⁺, Al³⁺,Cu²⁺, Pb²⁺, and Zn²⁺). The highest ion concentrations were observed during the beginning of the rainfall events because large amounts of dust accumulated in the atmosphere during dry periods and were scavenged by rain. The rainwater in the study area is characterized by low salinity and neutral pH. The major ions found in rainwater followed the order of HCO₃?>?Cl^??>?SO₄ ^2? and Ca²⁺?>?Na⁺ > Mg²⁺ > NH₄ ⁺ > K⁺. Trace metals were identified to be of anthropogenic origin resulting from cement and phosphate mining activities located within the investigated area and from heating activities during the cold period of the year (January to April). The wet precipitation chemistry was analyzed using factor component analysis for possible sources of the measured species. Factor analysis (principal component analysis) was used to assess the relationships between the concentrations of the studied ions and their sources. Factor 1 represents the contribution of ions from local anthropogenic activities, factor 2 represents the contribution of ions from natural sources, and factor 3 suggests biomass burning and anthropogenic source. Overall, the results revealed that rainwater chemistry is strongly influenced by local anthropogenic sources rather than natural and marine sources, which is in a good agreement with the results obtained by other studies conducted in similar sites around the world.     

Determination of EC 50 toxicity data of selected heavy metals toward Heterocypris incongruens and their comparison to ��direct-contact�� and microbiotests

The sensitivity of Heterocypris incongruens to selected heavy metal ions is discussed. Although the Ostracodtoxkit ${\textregistered}$ has been present on the market for a few years, data on its selectivity and sensitivity to toxicants is scarce; such data is indispensable when interpreting the results of sediment toxicity. The LC₅₀ and EC₅₀ results with the Ostracodtoxkit ${\textregistered}$ are compared with those obtained with other commercially available ??direct-contact?? tests (utilizing Hyalella azteca and Chironomus riparius) and microbiotests for assessing the toxicity of aqueous samples (Vibrio fischeri, Daphnia magna, and Selenastrum capricornatum). The sensitivity of H. incongruens to metal ions (Cd^2?+?>?>Hg^2?+?> Cu^2?+?>Cr^6?+?>Ni^2?+???Mn^7?+?>Zn^2?+?>Pb^2?+?>Li^1?+?> Fe^3?+?) was found to be similar to that of H. azteca and of C. riparius. The Ostracodtoxkit ${\textregistered}$ has shown itself to be an efficient and reliable element of test batteries for toxicity determination.     

The evaluation of the association constant between R-SN and Hg2+

The effective determination of heavy metals from environmental media is among the most important issues for many industrialized countries. The interaction between RS-N, as novel heavy metal probe, and metal ions was studied. RS-N shows selective color change from colorless to pink in the presence of Hg²⁺ in methanol/water solvent and the UV–Vis study shows peak at 560 nm. Fluorescence data revealed that the fluorescence enhance of RS-N by Hg²⁺ dramatically was the result of the formation of [Hg²⁺]RS-N complex. The effective association constants (K _a ) were 3.97?×?10⁵ and 0.204?×?10⁵ M^?1 for Hg²⁺ and Cu²⁺ to RS-N, respectively. The thermodynamic parameters, enthalpy change (ΔH ⁰) and entropy change (ΔS ⁰), were calculated to be ?6.431?±?0.226 kJ/mol and ?0.129?±?0.008 J/K/mol, respectively, according to van’t Hoff equation on the basis of Gibbs free energy (ΔG ⁰) ranged from ?33.8326 to ?28.5389 kJ/mol.     

Vehicular stress a cause for heavy metal accumulation and change in physico-chemical characteristics of road side soils in Pahalgam

In an effort to determine vehicular impact on soil quality, soil samples were collected from three different zones (Pahalgam, Batakote, and Chandanwari) in Pahalgam forest ecosystem. Results showed that a significant decrease in moisture content, organic carbon, available nitrogen, and potassium was observed in nearby road side soils. However, pH was observed to be on neutral side and available phosphorus recorded high concentration. The concentration of heavy metals Pb²⁺, Cu²⁺, Zn²⁺, Ni²⁺, and Cd²⁺ estimated was also significantly high. Furthermore, concentration of Pb²⁺ at high vehicular load subzones was observed to be highest (1.168 mg/Kg) followed by Zn²⁺ (0.896 mg/Kg), Ni²⁺ (0.649 mg/Kg), Cu²⁺ (0.415 mg/Kg), and Cd²⁺ (0.079 mg/Kg). An inter-zone analysis revealed that the concentration of the heavy metals (Pb²⁺?>?Ni²⁺?>?Cd²⁺) was observed to follow the trend, Z-I?>?Z-II?>?Z-III. Variation along the temporal gradient and the impact on soil qualities were notably higher in summer. Vehicular pollution to a great extent impacts physico-chemical characteristics and more interestingly adds substantial concentration of heavy metals in soils.     

A field study of the relationship between sulfide-bound metals and bioaccumulation by Limnodrilus sp. in a heavily polluted river

Acid volatile sulfide (AVS) has been regarded as an important factor controlling metal bioavailability in anoxic sediments, but its effect on metal accumulation under natural conditions is poorly understood. Here, a field study of the influence of AVS on metal accumulation by Limnodrilus sp. in a heavily polluted river is provided. Most of the study area was subject to anaerobic and strongly reducing conditions, and the concentration of trace metals in surface sediments was high, as were the concentration of AVS and simultaneously extracted metals (SEM; average AVS?=?20.3 μmol g^?1, average ∑SEM₅?=?9.42 μmol g^?1; ∑SEM₅ refers to the sum of SEM_Cd, SEM_Cu, SEM_Pb, SEM_Ni, and SEM_Zn). Only a few species and small quantities of benthic invertebrates were found, and Limnodrilus sp. was dominant. There was no correlation between trace metal accumulation and (SEM-AVS), and in stations where (SEM-AVS) <0, the absolute value of bioaccumulation was high (average ∑BIO₅?=?4.07 μmol g^?1; ∑BIO₅ refers to the sum of BIO_Cd, BIO_Cu, BIO_Pb, BIO_Ni, and BIO_Zn), indicating that there was no relationship between (SEM–AVS) and metal accumulation in Limnodrilus sp. This was likely because Limnodrilus sp. ingest sediment particles as their main food source, so pore water metals play a minor role in their bioaccumulation (BIO) of materials. However, ∑BIO₅ was significantly correlated with ∑SEM₅ (r?=?0.795, p?<?0.01), revealing that the large number of sulfide-bound metals (SEM) in sediments may play an important role in metal accumulation in Limnodrilus sp., which can assimilate sulfide-associated metals by the help of the digestive fluids in the digestive systems.     

Heavy metals regulate physiological and behavioral events by modulating ion channels in neuronal membranes of molluscs

The interaction of heavy metals (HgCl₂, CdCl₂, CuCl₂, PbCl₂ and ZnCl₂) and neurotransmitters (ACh, 5HT and DA) was studied on the excitable membrane of identified neurons of Lymnaea stagnalis and Helix pomatia. It was shown that,

1. The excitability and chemosensitivity of molluscan neurons were modified under the influence of the heavy metals Hg²⁺, Cd²⁺, Cu²⁺, Pb²⁺ and Zn²⁺.
2. Change in excitability to transmitters occurred as a potentiation or depression of the evoked response both in duration of membrane polarization and in frequency of spike activity.
3. The chemosensitivity changes in various ways, namely:
4. excitatory effect was totally eliminated;
5. one component of the effect was depressed.
Different neurons may show different reactions to the same heavy metal.
6. There were differences in the effects of various heavy metals. Hg²⁺ has a more generalized effect than Cd²⁺; Cu²⁺, Pb²⁺ and Zn²⁺ were less effective in a number of neurons. The heavy metal effect was dose dependent, too.
7. Both inward and outward currents, which were evoked by neurotransmitters or voltage induced, were modified in most of the tested neurons. Both an increase and decrease of the membrane permeability occurred in different neurons in response to the same or different heavy metals.
8. The changes can be interpreted as a result of
9. direct effect on specific ionic channels;
10. modification of receptors binding ACh, 5HT, or DA;
11. modification of intracellular processes responsible for the regulation of membrane permeability.

     

A mathematical model for the biosorption of copper on immobilized yeast in alginate

Saccharomyces cerevisiae yeast was entrapped in alginate for the recovery of copper ions from aqueous solution, in which both yeast and alginate could take metal ions. The Freundlich isotherm had been shown to be successful in describing biosorption and a linear biosorption was assumed when the equilibrium copper ion concentration in the fluid was lower than 1 mg/l. The biosorption isotherm was found to be independent of the immobilized yeast densities ranging from 6 to 17 percent. A mathematical model describing the mass transport along with the biosorption was developed with the main assumptions that the inner diffusion with constant diffusivity was the rate limiting step of the biosorption process and the pore solution locally equilibrated with the adjacent biosorbent (both yeast and alginate). This model has theoretical advantages over the formerly proposed Shrinkage Core Model and Linear Adsorption Model. Effective diffusion coefficients of copper ion in immobilized yeast beads using the model developed were found to be independent of the immobilized yeast densities ranging from 6 to 17 percent. The average result was 2.22×10^?5 cm²/s.     

Removal of mercury(II) ions in aqueous solution using the peel biomass of <Emphasis Type="Italic">Pachira aquatica</Emphasis> Aubl: kinetics and adsorption equilibrium studies

Mercury is a highly toxic substance that is a health hazard to humans. This study aims to investigate powders obtained from the peel of the fruit of Pachira aquatica Aubl, in its in natura and/or acidified form, as an adsorbent for the removal of mercury ions in aqueous solution. The materials were characterized by Fourier transform infrared spectroscopy and thermogravimetric analysis. The infrared spectra showed bands corresponding to the axial deformation of carbonyls from carboxylic acids, the most important functional group responsible for fixing the metal species to the adsorbent material. The thermograms displayed mass losses related to the decomposition of three major components, i.e., hemicellulose, cellulose, and lignin. The adsorption process was evaluated using cold-vapor atomic fluorescence spectrometry (CV AFS) and cold-vapor atomic absorption spectrometry (CV AAS). Three isotherm models were employed. The adsorption isotherm model, Langmuir-Freundlich, best represented the adsorption process, and the maximum adsorption capacity was predicted to be 0.71 and 0.58 mg g^?1 at 25 °C in nature and acidified, respectively. Adsorption efficiencies were further tested on real aqueous wastewater samples, and removal of Hg(II) was recorded as 69.6 % for biomass acidified and 76.3 % for biomass in nature. Results obtained from sorption experiments on real aqueous wastewater samples revealed that recovery of the target metal ions was very satisfactory. The pseudo-second-order model showed the best correlation to the experimental data. The current findings showed that the investigated materials are potential adsorbents for mercury(II) ion removal in aqueous solution, with acidified P. aquatica Aubl being the most efficient adsorbent.     

神经网络用于光度法同时测定多种重金属离子

采用可见分光光度法,通过构筑16-5-4多目标神经网络模型实现同时测定溶液中Cd2+、Pb2+、Cu2+、As3+的含量。实验以4-(2-吡啶偶氮)-间苯二酚(PAR)作为显色剂,采用"多因素多水平可视化设计法"设计样本,在4种组分可见吸收光谱严重重叠的390~480 nm范围内,选取16个特征波长处的吸光度作为输入信号,应用"留二法"原则训练BP网络。网络准确预测了结果,Cd2+、Pb2+、Cu2+、As3+的平均回收率分别为100.10%、100.03%、100.09%、99.99%,测定结果的相对标准偏差分别为0.18%、0.12%、0.26%、0.13%,达到了4种组分含量同时测定的目的。