Environmental concentrations of agricultural herbicides in Saskatchewan, Canada: bromoxynil, dicamba, diclofop, MCPA, and trifluralin

Herbicides are the most commonly used group of agricultural pesticides on the Canadian Prairies and, in 1990, more than 20000 Mg of herbicides were applied in the provinces of Alberta, Saskatchewan, and Manitoba. The present paper reports on environmental concentrations of five herbicides currently used in the prairie region. The herbicides bromoxynil [3,5-dibromo-4-hydroxy-benzonitrile], dicamba [3,6-dichloro-o-anisic acid], diclofop [(RS)-2-[4-(2,4-dichlorophenoxy)-phenoxy]propanoic acid], MCPA [(4-chloro-2-methylphenoxy)acetic acid], and trifluralin [alpha,alpha,alpha-trifluoro-2,6-dinitro-N,N-isopropyl-p-toluidine] were measured in the atmosphere, bulk atmospheric deposits, surface film, and dugout (pond) water at two sites near Regina, Saskatchewan, during 1989 and 1990. All five herbicides were detected in air and surface film and all but trifluralin were detected in the bulk atmospheric deposits and dugout water. Trifluralin was most frequently detected in air (79% of samples) whereas bromoxynil was present in maximum concentration (4.2 ng m(-3)). MCPA was present in maximum levels in bulk atmospheric (wet plus dry) deposits (2350 ng m(-2) d(-1)), surface film (390 ng m(-2)), and dugout water (330 ng L(-1)), whereas dicamba was most frequently detected in surface film (47%) and dugout water (97%). The highest quantities of the herbicides tended to be present during or immediately after the time of regional application.     

Accumulation, release, and solubility of arsenic, molybdenum, and vanadium in wetland sediments

This study was undertaken to determine the fate of As, Mo, and V (trace elements, TEs) in the sediments of a constructed wetland in use for the remediation of potentially toxic trace element-contaminated agricultural drainwater. After three years of wetland operation, sediment cores were collected to determine changes in TE concentrations as a function of depth and the effects of varying water column depth. All TE concentrations were highest in the top 2 to 4 cm and decreased with depth. Molybdenum accumulated in the wetland sediments, up to levels of 32.5 +/- 4.6, 30.2 +/- 8.9, and 59.3 +/- 26.1 mg kg(-1) in the top 1 cm of sediment at water depths of 15, 30, and 60 cm, respectively. In the top 2 cm of sediment, As accumulated (28.2 +/- 3.0 mg kg(-1)) only at the 60-cm water depth. Below 2 cm, as much as 10 mg kg(-1) of As was lost from the sediment at all water depths. In most cases, V concentrations decreased in the sediment. In this wetland system, the lowest redox potentials were found near the sediment surface and increased with depth. Thus, in general As, Mo, and V concentrations in the sediment were highest under more reducing conditions and lowest under more oxidizing conditions. Most of the accumulated Mo (73%) became water soluble on drying of samples. This has important implications for systems undergoing changes in redox status; for instance, if these wetland sediments are dried, potentially large amounts of Mo may be solubilized.     

Optimizing angles of rooftop photovoltaics,ratios of solar to vegetated roof systems,and economic benefits,in Portland,Oregon, USA

This study analyzed insolation data to account for multiple scattering in calculating optimal tilt angles for stationary and seasonally moving photovoltaics on three different roof types in the US Pacific Northwest: vegetated roofs, white roofs, and dark roofs. Using these results, we modeled the energy savings for vegetated roofs and roofs covered in varying numbers of photovoltaic panels. We then calculated the net present value, internal rate of return, and other economic measures for all possible combinations of covering rooftops in mixes of photovoltaic arrays and vegetation, accounting for installation costs, proposed carbon taxes, stormwater management discounts, and other relevant factors. Our results quantify how, in the US Pacific Northwest and similar locations, photovoltaics produce higher returns on investment than do vegetated roofs for new buildings, while vegetated roofs produce better returns on investment than do photovoltaics for older buildings. This is important because in many areas, some buildings have photovoltaics when a vegetated roof would have been more cost and energy efficient, while other buildings have vegetated roofs when photovoltaics would have been more cost and energy efficient. Potential applications include modifying incentive programs and other policies to account properly for building age, use, and other relevant factors to ensure building owners make the most energy-efficient decisions between photovoltaic versus vegetated roof installation. Our research also demonstrates how positive returns on investment can be realized in the US Pacific Northwest and similar regions through vegetated roofs and photovoltaics provided they are each installed optimally.     

Adsorption of pesticides onto quartz, calcite, kaolinite, and alpha-alumina

The fate of pesticides in aquifers is influenced by the small but not insignificant adsorption of pesticides to mineral surfaces. Batch experiments with five pesticides and four minerals were conducted to quantify the contributions to adsorption from different mineral surfaces and compare adsorption characteristics of selected pesticides. Investigated mineral phases included quartz, calcite, kaolinite, and alpha-alumina. Selected pesticides comprised atrazine (6-chloro-N2-ethyl-N4-isopropyl-1,3,5-triazine-2,4-diamine), isoproturon [3-(4-isopropylphenyl)-1,1-dimethylurea)], mecoprop [(RS)-2-(4-chloro-2-methylphenoxy)propionic acid], 2,4-D (2,4-dichlorophenoxyacetic acid), and bentazone [3-isopropyl-1H-2,1,3-benzothiadiazin-4-(3H)-one 2,2-dioxide]. Specific surface area and mineral surface charge proved to be important for the adsorption of these pesticides. Detectable adsorption of the anionic pesticides (mecoprop, 2,4-D, and bentazone) was only measured when positive sites were present on the mineral surface. However, when CaCl2 was added as an electrolyte, a detectable adsorption of mecoprop and 2,4-D was also measured on kaolinite (which exhibits a negative surface charge), probably due to formation of Ca-pesticide--surface complexes. Adsorption of the uncharged pesticides (atrazine and isoproturon) was detected only on kaolinite. The lack of adsorption on alpha-alumina indicates that the uncharged pesticides have a greater affinity for the silanol surface sites (=SiOH) than for the aluminol surface sites (=AlOH) in kaolinite. No measurable effect of ionic strength was found for the uncharged pesticides. The results indicate that quartz and calcite play a smaller role than clay minerals.     

Determination and Evaluation of Cadmium, Copper, Nickel, and Zinc in Agricultural Soils of Western Macedonia, Greece

The objective of this study was to determine the levels of major phytotoxic metals―including cadmium (Cd), copper (Cu), nickel (Ni), and zinc (Zn)―in agricultural soils of Western Macedonia, Greece. We also wanted to determine the possible relationships among elements and between soil properties and elemental concentrations. Surface soil samples, n = 570, were collected and analyzed. The results of the elemental analysis showed that the mean metal concentrations were consistent with reported typical concentrations found in Greek agricultural soils in the cases of Zn and Cu. Cd exhibited lower and Ni higher mean concentrations than the typical levels reported in the literature. Metal concentrations in the majority of the examined samples (>69%) were found to be higher than the respective critical plant-deficiency levels. However, only 0.4% and 0.2% of the analyzed soil samples, respectively, exhibited Cd and Ni concentrations higher than the levels that cause plant toxicity, as referenced by other investigators. These results suggest that the soils studied can be considered as unpolluted with respect to the examined food-chain metal contaminants. However, the levels of the metal concentrations in some of the soil samples, and the low correlation of the metals with soil properties, suggest an anthropogenic rather that lithogenic origin.     

Concentrations and pattern of Fe,Cu, Cr,and Zn contamination in the soils of Akure,Nigeria

An assessment was made on twenty-eight topsoils collected from seven sites with intense artisan activities in the city of Akure, Nigeria, using geochemical approach in order to establish anthropogenic influence on metal contamination and to assess the severity of the contamination in the urban environment. Concentrations of Fe, Cu, Zn, and Cr were determined in the samples by atomic absorption spectrophotometry. The results revealed between 137- and 165-fold elevation of Fe, between 17- and 94-fold elevation of Cu, between 50- and 137-fold elevation of Zn, and between 1- and 3-fold elevation of Cr in topsoil relative to background levels. This indicates that except for Cr, soil contaminations by the metals were due to anthropic sources such as mechanic and vulcanizers workshops. The current average levels of copper exceeded the target value in Nigeria and in many developed countries, while Zn and Cr are generally lower than the respective soil quality guidelines. The contamination/pollution index maps figured out mechanic workshop as the main source of diffuse contamination and also show the influence of the point sources of contamination to urban topsoils. Cu contamination found around the soils of the mechanic/battery charger workshop is potentially serious (severe pollution), and this may pose health risk to people dwelling around these sites or within the metropolis. Children could be at greater risk than adults, because of their hand-to-mouth behaviors that increase their exposure potential.     

Field Trial Assessment of Biological,Chemical, and Physical Responses of Soil to Tillage Intensity,Fertilization, and Grazing

Soil microbial populations can fluctuate in response to environmental changes and, therefore, are often used as biological indicators of soil quality. Soil chemical and physical parameters can also be used as indicators because they can vary in response to different management strategies. A long-term field trial was conducted to study the effects of different tillage systems (NT: no tillage, DH: disc harrow, and MP: moldboard plough), P fertilization (diammonium phosphate), and cattle grazing (in terms of crop residue consumption) in maize (Zea mays L.), sunflower (Heliantus annuus L.), and soybean (Glycine max L.) on soil biological, chemical, and physical parameters. The field trial was conducted for four crop years (2000/2001, 2001/2002, 2002/2003, and 2003/2004). Soil populations of Actinomycetes, Trichoderma spp., and Gliocladium spp. were 49% higher under conservation tillage systems, in soil amended with diammonium phosphate (DAP) and not previously grazed. Management practices also influenced soil chemical parameters, especially organic matter content and total N, which were 10% and 55% higher under NT than under MP. Aggregate stability was 61% higher in NT than in MP, 15% higher in P-fertilized soil, and also 9% higher in not grazed strips, bulk density being 12% lower in NT systems compared with MP. DAP application and the absence of grazing also reduced bulk density (3%). Using conservation tillage systems, fertilizing crops with DAP, and avoiding grazing contribute to soil health preservation and enhanced crop production.     

The desorption of antimony(V) from sediments, hydrous oxides, and clay minerals by carbonate, phosphate, sulfate, nitrate, and chloride

The desorption of antimony, Sb(V), from two sediment samples by phosphate, carbonate, sulfate, chloride, and nitrate at pH 8 was examined. One highly contaminated sediment sample was taken from an Sb mine (Goesdorf, Luxembourg); the other sample was the certified reference material PACS-2 (marine sediment). Phosphate was found to have a strong mobilizing ability, whereas that of carbonate was in general weaker. For comparison, and to understand better the possible importance of individual components of the sediments, desorption experiments were performed on pure phases (i.e., hydrous oxides of Fe, Mn, and Al) and the clay minerals kaolinite and montmorillonite. In the cases of hydrous metal oxides, Sb(V) was most effectively desorbed by phosphate, followed by carbonate. Phosphate also desorbed Sb(V) from the clay minerals, whereas carbonate had no effect. The pH dependence of adsorption of Sb(V) in the absence and presence of carbonate revealed that adsorption densities were higher (except in the case of montmorillonite) in the absence of carbonate, suggesting a competition between carbonate and [Sb(OH)] for surface sites generally and a lowering of surface charge in the case of hydrous aluminum oxide. The observations are unlikely to be due to ionic strength effects because activity coefficients in the blank and spiked solutions differ by <4%. Desorption experiments on sediments with varying concentrations of phosphate and carbonate demonstrated that at environmentally relevant concentrations, desorption by phosphate is negligible, whereas the effect of carbonate is not. Sulfate, chloride, and nitrate generally had little effect. The proportion of Sb desorbed in blank experiments coincides with that mobilized in the first fraction of the Bureau Communautaire de Référence (BCR) sequential extraction (easily exchangeable and carbonate-bound fraction).     

National, holistic, watershed-scale approach to understand the sources, transport, and fate of agricultural chemicals

This paper is an introduction to the following series of papers that report on in-depth investigations that have been conducted at five agricultural study areas across the United States in order to gain insights into how environmental processes and agricultural practices interact to determine the transport and fate of agricultural chemicals in the environment. These are the first study areas in an ongoing national study. The study areas were selected, based on the combination of cropping patterns and hydrologic setting, as representative of nationally important agricultural settings to form a basis for extrapolation to unstudied areas. The holistic, watershed-scale study design that involves multiple environmental compartments and that employs both field observations and simulation modeling is presented. This paper introduces the overall study design and presents an overview of the hydrology of the five study areas.     

Analysis of bank erosion on the Merced River,Yosemite Valley,Yosemite National Park,California, USA

Channel changes from 1919 to 1989 were documented in two study reaches of the Merced River in Yosemite National Park through a review of historical photographs and documents and a comparison of survey data. Bank erosion was prevalent and channel width increased an average of 27% in the upstream reach, where human use was concentrated. Here, trampling of the banks and riparian vegetation was common, and banks eroded on straight stretches as frequently as on meander bends. Six bridges in the upper reach constrict the channel by an average of 38% of the original width, causing severe erosion. In the downstream control reach, where human use was minimal, channel widths both decreased and increased, with a mean increase of only 4% since 1919. Bank erosion in the control reach occurred primarily on meander bends. The control reach also had denser stands of riparian vegetation and a higher frequency of large woody debris in channels. There is only one bridge in the lower reach, located at the downstream end. Since 1919, bank erosion in the impacted upstream reach contributed a significant amount of sediment (74,800 tonnes, equivalent to 2.0 t/km²/yr) to the river. An analysis of 75 years of precipitation and hydrologic records showed no trends responsible for bank erosion in the upper reach. Sediment input to the upper reach has not changed significantly during the study period. Floodplain soils are sandy, with low cohesion and are easily detached by lateral erosion. The degree of channel widening was positively correlated with the percentage of bare ground on the streambanks and low bank stability ratings. Low bank stability ratings were, in turn, strongly associated with high human use areas. Channel widening and bank erosion in the upper reach were due primarily to destruction of riparian vegetation by human trampling and the effect of bridge constrictions on high flow, and secondarily to poorly installed channel revetments. Several specific recommendations for river restoration were provided to park management.     

Effects of weir management on marsh loss,Marsh Island,Louisiana, USA

Weirs are low-level dams traditionally used in Louisiana's coastal marshes to improve habitat for ducks and furbearers. Currently, some workers hope that weirs may reduce marsh loss, whereas others fear that weirs may accelerate marsh loss. Parts of Marsh Island, Louisiana, have been weir-managed since 1958 to improve duck and furbearer habitat. Using aerial photographs, marsh loss that occurred between 1957 and 1983 in a 2922-ha weir-managed area was compared to that in a 2365-ha unmanaged area. Marsh loss was 0.38%/yr in the weir-managed area, and 0.35%/yr in the unmanaged area. Because marsh loss in the two areas differed less than 0.19%/yr, it was concluded that weirs did not affect marsh loss. The increase in open water between 1957 and 1983 did not result from the expansion of lakes or bayous. Rather, solid marsh converted to broken marsh, and the amount of vegetation within previously existing broken marsh decreased. Solid marsh farthest from large lakes and bayous, and adjacent to existing broken marsh, seemed more likely to break up. Marsh Island has few canals; therefore, marsh loss resulted primarily from natural processes. Weirs may have different effects under different hydrological conditions; additional studies are needed before generalizations regarding weirs and marsh loss can be made.