Accounting for forest carbon pool dynamics in product carbon footprints: Challenges and opportunities

Modification and loss of forests due to natural and anthropogenic disturbance contribute an estimated 20% of annual greenhouse gas (GHG) emissions worldwide. Although forest carbon pool modeling rarely suggests a ‘carbon neutral’ flux profile, the life cycle assessment community and associated product carbon footprint protocols have struggled to account for the GHG emissions associated with forestry, specifically, and land use generally. Principally, this is due to underdeveloped linkages between life cycle inventory (LCI) modeling for wood and forest carbon modeling for a full range of forest types and harvest practices, as well as a lack of transparency in globalized forest supply chains. In this paper, through a comparative study of U.S. and Chinese coated freesheet paper, we develop the initial foundations for a methodology that rescales IPCC methods from the national to the product level, with reference to the approaches in three international product carbon footprint protocols. Due to differences in geographic origin of the wood fiber, the results for two scenarios are highly divergent. This suggests that both wood LCI models and the protocols need further development to capture the range of spatial and temporal dimensions for supply chains (and the associated land use change and modification) for specific product systems. The paper concludes by outlining opportunities to measure and reduce uncertainty in accounting for net emissions of biogenic carbon from forestland, where timber is harvested for consumer products.     

Emission factors from residential combustion appliances burning Portuguese biomass fuels

Smoke from residential wood burning has been identified as a major contributor to air pollution, motivating detailed emission measurements under controlled conditions. A series of experiments were performed to compare the emission levels from two types of wood-stoves to those of fireplaces. Eight types of biomass were burned in the laboratory: wood from seven species of trees grown in the Portuguese forest (Pinus pinaster, Eucalyptus globulus, Quercus suber, Acacia longifolia, Quercus faginea, Olea europaea and Quercus ilex rotundifolia) and briquettes produced from forest biomass waste. Average emission factors were in the ranges 27.5-99.2 g CO kg(-1), 552-1660 g CO(2) kg(-1), 0.66-1.34 g NO kg(-1), and 0.82-4.94 g hydrocarbons kg(-1) of biomass burned (dry basis). Average particle emission factors varied between 1.12 and 20.06 g kg(-1) biomass burned (dry basis), with higher burn rates producing significantly less particle mass per kg wood burned than the low burn rates. Particle mass emission factors from wood-stoves were lower than those from the fireplace. The average emission factors for organic and elemental carbon were in the intervals 0.24-10.1 and 0.18-0.68 g kg(-1) biomass burned (dry basis), respectively. The elemental carbon content of particles emitted from the energy-efficient "chimney type" logwood stove was substantially higher than in the conventional cast iron stove and fireplace, whereas the opposite was observed for the organic carbon fraction. Pinus pinaster, the only softwood species among all, was the biofuel with the lowest emissions of particles, CO, NO and hydrocarbons.     

Global research on carbon footprint: A scientometric review

In the context of global climate change, carbon footprint research has become a hot spot for many regions and scholars. However, a global, systematic and intuitive literature review of carbon footprint is still lacking, which has become the motivation of this research. Based on 7450 articles in the Web of Science Core Collection, this study conducted a literature review and analysis of carbon footprint from the perspective of scientometric. It is found that between 1992 and 2019, the theme of carbon footprint research has changed from ecology and botany to international trade and household behaviours, etc. Water vapour is the longest lasting carbon footprint research topic. The research scope shows a trend from small to large, that is, from the level of individuals and families to enterprises and organizations, and then to the countries and regions. Year 2008 is the main node in carbon footprint research: the classic literature before 2008 is the hubs of later research; the research after 2008 shows a significant trend of diversification and interdisciplinary development. The China's research institutions and scholars have shown an explosive trend after 2008. However, most international cooperation still occurs between North American and European countries, while developing countries such as China are still in the marginal area. The main source of knowledge for carbon footprint research is the subject “Veterinary, Animal, Science”; relatively, the research results are mainly applied to the subject “Environmental, Toxicology, Nutrition”. In addition, it is worth noting that carbon footprint research is showing a trend of merging with Economics research. These trends prove that there has been a significant theme drift and knowledge evolution process in carbon footprint research.     

Carbon footprint: current methods of estimation

Increasing greenhouse gaseous concentration in the atmosphere is perturbing the environment to cause grievous global warming and associated consequences. Following the rule that only measurable is manageable, mensuration of greenhouse gas intensiveness of different products, bodies, and processes is going on worldwide, expressed as their carbon footprints. The methodologies for carbon footprint calculations are still evolving and it is emerging as an important tool for greenhouse gas management. The concept of carbon footprinting has permeated and is being commercialized in all the areas of life and economy, but there is little coherence in definitions and calculations of carbon footprints among the studies. There are disagreements in the selection of gases, and the order of emissions to be covered in footprint calculations. Standards of greenhouse gas accounting are the common resources used in footprint calculations, although there is no mandatory provision of footprint verification. Carbon footprinting is intended to be a tool to guide the relevant emission cuts and verifications, its standardization at international level are therefore necessary. Present review describes the prevailing carbon footprinting methods and raises the related issues.     

Non-target effect of organic insecticides: effect of two plant extracts on soil microbial biomass and enzymatic activities in soil

Efficacious botanical derivatives can provide an alternative to synthetic pesticides for organic farming systems. However, there is lack of information regarding the side effects of organic pesticides on key soil ecological processes. In this study, we investigated the effects of aqueous extracts from Urginea maritima and Euphorbia myrsinites exhibiting translaminar and systemic activity against pests on microbial biomass and enzymatic activities in soil. Two grams of plant material was extracted with 100 ml of water and then diluted 1:100, 2:100, and 4:100 with distilled water. Diluted plant extracts were applied around hypocotyl of tomato by soil drench. The effect of both plant extracts on microbial biomass C, amount of total N and organic C, and enzymatic activity in soil was significant. After the last application, the highest microbial biomass C was determined in the lowest U. maritima concentration (U 1:100). Soils treated with the highest concentration of U. maritima (U 4:100) had always lower SMBC content than control soil. All concentrations of E. myrsinites decreased microbial biomass C by 18% to 27% compared to the control. Total nitrogen and organic carbon decreased in soils without (control) and with treated U. maritima extract from first application to last application. Phosphatase, urease, and β-glucosidase activities were monitored in plant extract-treated soils. Except U. maritima 1:100 treatments of second and fourth applications, the other treatments of plant extracts negatively affected enzymatic activity in soil. U. maritima and E. myrsinites plant extracts exhibited different effects on soil microbial biomass and activity, probably because of their different chemical contents.     

The carbon footprint of a knowledge organization and emission scenarios for a post-COVID-19 world

The looming climate crisis requires an immediate response, in which organizations, as major contributors, should play a central role. However, these organizations need appropriate tools to measure and mitigate their climate impacts. One commonly applied method is carbon footprint analysis. Carbon footprint analyses have been conducted for various types of organizations, but knowledge organizations, such as universities and research institutes, have received far less attention, because their carbon footprint is often less visible and can be easily underestimated. This study is based on the carbon footprint analysis of one multinational knowledge organization. This analysis then helped identify the major sources of climate impacts in other such knowledge organizations. These are mainly indirect emissions (Scope 3) and to a large extent (79%) travel-related emissions. Based on these findings, three scenarios for a post-COVID-19 world were developed and analyzed. The results from the first two scenarios showed that despite a reduction in business travel and employees working from home, Scope 3 and travel-related emissions would remain the largest contributor. Only in the unlikely case of the third, non-recovery scenario did the share of travel-related emissions drop, turning heating into the largest contributor. In addition to measuring the carbon footprint, the study discusses potential mitigation strategies knowledge organizations could apply to reduce their carbon footprint. The focus is on how to avoid and reduce emissions, but new forms of carbon offsetting are also addressed. Based on the findings, a mitigation policy framework and recommendations for further research are proposed.     

Large-scale carbon stock assessment of woody vegetation in tropical dry deciduous forest of Sathanur reserve forest,Eastern Ghats,India

Tropical dry forests are one of the most widely distributed ecosystems in tropics, which remain neglected in research, especially in the Eastern Ghats. Therefore, the present study was aimed to quantify the carbon storage in woody vegetation (trees and lianas) on large scale (30, 1 ha plots) in the dry deciduous forest of Sathanur reserve forest of Eastern Ghats. Biomass of adult (≥10 cm DBH) trees was estimated by species-specific allometric equations using diameter and wood density of species whereas in juvenile tree population and lianas, their respective general allometric equations were used to estimate the biomass. The fractional value 0.4453 was used to convert dry biomass into carbon in woody vegetation of tropical dry forest. The mean aboveground biomass value of juvenile tree population was 1.86 Mg/ha. The aboveground biomass of adult trees ranged from 64.81 to 624.96 Mg/ha with a mean of 245.90 Mg/ha. The mean aboveground biomass value of lianas was 7.98 Mg/ha. The total biomass of woody vegetation (adult trees + juvenile population of trees + lianas) ranged from 85.02 to 723.46 Mg/ha, with a mean value of 295.04 Mg/ha. Total carbon accumulated in woody vegetation in tropical dry deciduous forest ranged from 37.86 to 322.16 Mg/ha with a mean value of 131.38 Mg/ha. Adult trees accumulated 94.81% of woody biomass carbon followed by lianas (3.99%) and juvenile population of trees (1.20%). Albizia amara has the greatest biomass and carbon stock (58.31%) among trees except for two plots (24 and 25) where Chloroxylon swietenia contributed more to biomass and carbon stock. Similarly, Albizia amara (52.4%) showed greater carbon storage in juvenile population of trees followed by Chloroxylon swietenia (21.9%). Pterolobium hexapetalum (38.86%) showed a greater accumulation of carbon in liana species followed by Combretum albidum (33.04%). Even though, all the study plots are located within 10 km radius, they show a significant spatial variation among them in terms of biomass and carbon stocks which could be attributed to variation in anthropogenic pressures among the plots as well as to changes in tree density across landscapes. Total basal area of woody vegetation showed a significant positive (R ² = 0.978; P = 0.000) relationship with carbon storage while juvenile tree basal area showed the negative relationship (R ² = 0.4804; P = 0.000) with woody carbon storage. The present study generates a large-scale baseline data of dry deciduous forest carbon stock, which would facilitate carbon stock assessment at a national level as well as to understand its contribution on a global scale.     

Ecological footprint accounting: A multi-scale approach based on net primary productivity

The Ecological footprint accounting is a resource accounting tool that is used to track the sustainability of human systems. In this paper, we present a new approach to calculate the Ecological Footprint metrics at different geographic scales using Net Primary Productivity data. Our study focuses on the town of Afourar, Morocco, as a case study examined at three different scales; national, regional, and provincial scale. In contrast with other studies, our footprint accounting results are expressed in what we have called territorial hectares. The accounting results show that geographic scale has a significant influence on the footprint model, where three cases of sustainability were found. This implies that the efforts to maintain the sustainability of territories are more important at some scales than others. We argue that the relationship between sustainability and geographic scale is both strong and complex and that sustainability is a spatially relative concept. Therefore, we conclude that multi-scale analysis is crucial for making sustainable decisions and management policies.     

Impacts of software and its engineering on the carbon footprint of ICT

The energy consumption of information and communication technology (ICT) is still increasing. Even though several solutions regarding the hardware side of Green IT exist, the software contribution to Green IT is not well investigated. The carbon footprint is one way to rate the environmental impacts of ICT. In order to get an impression of the induced CO₂ emissions of software, we will present a calculation method for the carbon footprint of a software product over its life cycle. We also offer an approach on how to integrate some aspects of carbon footprint calculation into software development processes and discuss impacts and tools regarding this calculation method. We thus show the relevance of energy measurements and the attention to impacts on the carbon footprint by software within Green Software Engineering.     

Biomonitoring of Lead, Zinc, and Cadmium in Streams Draining Lead-Mining and Non-Mining Areas, Southeast Missouri, USA

We evaluated exposure of aquatic biota to lead (Pb), zinc (Zn), and cadmium (Cd) in streams draining a Pb-mining district in southeast Missouri. Samples of plant biomass (detritus, periphyton, and filamentous algae), invertebrates (snails, crayfish, and riffle benthos), and two taxa of fish were collected from seven sites closest to mining areas (mining sites), four sites further downstream from mining (downstream sites), and eight reference sites in fall 2001. Samples of plant biomass from mining sites had highest metal concentrations, with means 10- to 60-times greater than those for reference sites. Mean metal concentrations in over 90% of samples of plant biomass from mining sites were significantly greater than those from reference sites. Mean concentrations of Pb, Zn, and Cd in most invertebrate samples from mining sites, and mean Pb concentrations in most fish samples from mining sites, were also significantly greater than those from reference sites. Concentrations of all three metals were lower in samples from downstream sites, but several samples of plant biomass from downstream sites had metal concentrations significantly greater than those from reference sites. Analysis of supplemental samples collected in the fall of 2002, a year of above-average stream discharge, had lower Pb concentrations and higher Cd concentrations than samples collected in 2001, near the end of a multi-year drought. Concentrations of Pb measured in fish and invertebrates collected from mining sites during 2001 and 2002 were similar to those measured at nearby sites in the 1970s, during the early years of mining in the Viburnum Trend. Results of this study demonstrate that long-term Pb mining activity in southeast Missouri has resulted in significantly elevated concentrations of Pb, Cd, and Zn in biota of receiving streams, compared to biota of similar streams without direct influence of mining. Our results also demonstrate that metal exposure in the study area differed significantly among sample types, habitats, and years, and that these factors should be carefully considered in the design of biomonitoring studies.     

A Comparison of Three Methods to Collect Submerged Aquatic Vegetation in a Shallow Lake

Two boat-based and one in-water sampling method have been used to collect submerged aquatic vegetation (SAV) as part of a long-term monitoring program in Lake Okeechobee, Florida, USA. The boat-based methods consisted of collecting SAV with a ponar dredge, used only to collect Chara, and an oyster tongs-like rake apparatus, used to collect all SAV. The in-water method involved use of a 0.5 m² PVC quadrat frame deployed by a diver. During summer 2002, SAV biomass samples were collected using all three methods at various sites in the lake to compare between-methods sampling precision. Sites used for these comparisons were selected based on plant type, plant density and sediment type. Statistical comparisons indicated that there were significant (p ≤ 0.05) biomass differences in 8 of 15 possible pairwise comparisons between sampling method biomass means. In four of the eight comparisons, significantly higher biomass mean values were obtained using the quadrat frame. In three of the remaining four comparisons, significantly higher biomass mean values were obtained with the rake apparatus. For the fourth comparison, a significantly higher biomass mean value was obtained with the ponar dredge. Three of the four relationships between SAV biomass collected by the rake and the quadrat and the rake and the quadrat/ponar dredge were statistically significant, linear and explained between 67 and 78% of the biomass variability. There were no significant differences between regression coefficients or elevations for these relationships, therefore these regressions estimated the same population regression. The population regression coefficient was 0.95, suggesting that the quadrat and ponar over-sampled relative to the rake, but the amount of this over-sampling was very small. Since there was no consistent pattern in the sampling method which yielded the significantly different biomass values and there were no significant differences in sampling precision across a range of plant species, plant densities and two sediment types, the boat-based rake method appears to be a suitable replacement for the previously used ponar dredge and quadrat methods, when in-lake measurements are not practical.     

An Integrated Assessment by Models for Energy Systems Analysis and Life-Cycle Assessment with a Case Study of Advanced Fossil-Fired Power Plants in China

We developed an integrated assessment (IA) using models for energy systems analysis and life-cycle assessment (LCA). Based on this assessment framework, we developed cost-benefit analysis (CBA) case studies for a hypothetical project designed to introduce advanced fossil-fired power generation technologies in China. Our MARKAL model for Japan confirmed that radical reductions (i.e., 80 % by 2050) of carbon dioxide (CO₂) could be attained from energy systems alone and that credit for emission allowances was required. We evaluated life-cycle costs and emissions of carbon dioxide, sulfur oxide, and nitrogen oxide gases for the energy technologies using an LCA model. Further, we applied a power generation planning model for six Chinese grids to provide a power mix structure, potentially producing credit by installing fossil-fired power generation technology and by using baseline grid emission factors with an average cost of electricity. Finally, by using dynamic emission reductions and additional costs from the two models, we conducted case studies of CBA for a hypothetical project to install the technologies in China. This was accomplished by evaluating emission reductions in monetary terms and by applying a life-cycle impact assessment model. A unique feature of our IA is its dynamic (time-varying) assessment of costs and benefits.     

青藏高原典型城市拉萨市大气颗粒物污染源成分谱建立研究与特征分析

系统研究建立高原典型城市拉萨市开放源(土壤风沙尘、道路扬尘、施工扬尘、采矿扬尘),移动源(机动车尾气尘),固定源(工业烟粉尘、生物质燃烧尘及餐饮油烟)共3类8种大气颗粒物(PM_(2.5)、PM_(10))污染源化学成分谱。研究结果表明:开放源以地壳类元素为主,自然背景特征明显;移动源源成分谱中元素碳含量明显高于其他城市,在PM_(2.5)、PM_(10)源谱中分别占60.15%、51.86%,有机碳含量也相对较高,均超过20%;固定源中,牛粪和松柏枝两类生物质燃烧污染源的有机碳含量显著高于其他组分,工业烟粉尘中Ca远高于其他组分,在PM_(2.5)、PM_(10)源谱中分别占21.32%、21.21%。移动源、固定源源成分谱均显示出高原城市的独特特征。     

Adaptational strategy of a tropical shrub Carissa Carandas L. to urban air pollution

This paper reports the adaptational response of a tropical shrub Carissa Carandas L. to urban air pollution stress in Varanasi, India. Saplings of C. carandas were grown at a density of one per pot and kept for two years at 25 selected sites in the urban environment. Different sites received different levels of air pollution input. Changes in vegetative growth pattern (leafing and branching), in morphological features and in the distribution of biomass to above and below ground structures were considered in relation to the ambient air quality.Different levels of air pollution input produced different sets of harmful effects. Although the air pollution level at Varanasi reduced the plant height, basal diameter, canopy area, leaf area and total plant biomass of C. carandas, this species retained a major fraction of its photosynthate to above-ground plant parts where foliage assumes predominance. Since carbon gain is dependent not only on the rate of carbon acquisition per unit leaf tissue but also on the amount of photosynthetic tissue present, a shift in relative contribution of photosynthate to leaf production and shoot growth appears to be a pollution-induced adaptive response in C. carandas.     

Foliar nutrient and metal levels of crops in the Mount Cameroon area—reference values for plant nutrition and environmental monitoring

The growing population number and traffic loads, increasing environmental pressures, agricultural intensification, and the establishment of Mount Cameroon National Park demand farsighted environmental management in the region and the definition of a favorable ecological status. Since plants grow in the interface between soils and the atmosphere they can be used as passive biomonitors for the environmental quality. At the same time, the accumulation of nutrients and pollutants in crops is linked to human health, so that foliar elemental levels can be used as an integrative measure for environmental pollution and impact assessment. In the present study, we collected leaf samples of plantain, cassava, cocoyam, and maize on 28 sites at the southern flanks of Mt. Cameroon and determined 20 chemical elements. Air pollution in the study area comes from biomass and waste burning mainly, but emissions from traffic and a large refinery were believed to also play a significant role. However, spatial patterns in foliar elemental concentrations reflected the geochemistry rather than specific sources of pollution. Significant differences in foliar metal and nutrient levels were observed between the four species, indicating a different demand and uptake of specific elements. The results were compared to published data on nutrient concentrations in the tested species and the so-called reference plant. The data can be used as a baseline for future studies in plant nutrition and the environmental monitoring in inner tropical regions where these crops are grown.     

Biofuel use assessments in Africa: Implications for greenhouse gas emissions and mitigation strategies

The energy balances of most African countries suggest that biofuels (woodfuel, crop and wood residues, and dung) constitute the largest share of total energy consumption (up to 97% in some sub-Saharan Africa countries). There is, however, an increasing scarcity of woodfuel (fuelwood and charcoal), the major biofuel, and a feared increase in greenhouse gas (GHG) emissions associated with biofuel combustion. The extent of GHG emissions is estimated from biofuel consumption levels that are in turn based on methodologies that might be inaccurate. A questionnaire, supplemented by informal interviews, are used to collect data, yielding information regarding end-uses, technologies used, scale of consumption, determinants of fuel consumption, and interfuel substitution (among other parameters). The survey revealed that cooking is the major end-use, with other common uses, such as space and water heating. Improved stoves that provide better combustion efficiency and, thus, reduce woodfuel consumption have not been widely disseminated and are associated with higher methane emissions than open fires. More than 90% of the households in Africa use open fires. Consumption is presented as per capita for households and as products and quantity of fuel in the small scale industries, commercial, and public sectors. Among the determinants for biofuel consumption are affordability, availability of the fuel, and interfuel substitutions. Flaws in estimating biofuel consumption yield large uncertainties in GHG emissions, with implications for the development of policies on energy planning and environmental protection. However, the application of scenarios can guide policy formulation.     

火电厂石灰石-石膏脱硫设施环保验收监测若干问题的探讨

以"十一五"期间较为常见的火电厂石灰石-石膏脱硫设施竣工环保验收监测为例,着重就验收过程监测布点、设施处理效率计算、污染物总量核算、减排项目标准执行以及环境管理检查中存在的问题进行探讨,提出解决问题的方法与思路,为今后火电厂竣工环保验收监测工作提供借鉴。     

Carbon storage and emissions offset potential in an African dry forest, the Arabuko-Sokoke Forest, Kenya

Concerns about rapid tropical deforestation, and its contribution to rising atmospheric concentrations of greenhouse gases, increase the importance of monitoring terrestrial carbon storage in changing landscapes. Emerging markets for carbon emission offsets may offer developing nations needed incentives for reforestation, rehabilitation, and avoided deforestation. However, relatively little empirical data exists regarding carbon storage in African tropical forests, particularly for those in arid or semi-arid regions. Kenya's 416 km(2) Arabuko-Sokoke Forest (ASF) is the largest remaining fragment of East African coastal dry forest and is considered a global biodiversity hotspot (Myers et al. 2000), but has been significantly altered by past commercial logging and ongoing extraction. Forest carbon storage for ASF was estimated using allometric equations for tree biomass, destructive techniques for litter and herbaceous vegetation biomass, and spectroscopy for soils. Satellite imagery was used to assess land cover changes from 1992 to 2004. Forest and thicket types (Cynometra webberi dominated, Brachystegia spiciformis dominated, and mixed species forest) had carbon densities ranging from 58 to 94 Mg C/ha. The ASF area supported a 2.8-3.0 Tg C carbon stock. Although total forested area in ASF did not change over the analyzed time period, ongoing disturbances, quantified by the basal area of cut tree stumps per sample plot, correlated with decreased carbon densities. Madunguni Forest, an adjoining forest patch, lost 86% of its forest cover and at least 76% of its terrestrial carbon stock in the time period. Improved management of wood harvesting in ASF and rehabilitation of Madunguni Forest could substantially increase terrestrial carbon sequestration in the region.