火电厂烟气脱硫工艺的选择

介绍了Turbosonic烟气脱硫技术和美国Airpol公司的湿法脱硫技术,并进行了技术经济分析,提出了对火电厂脱硫工艺选择的看法。     

区域特性分析在广东烟气脱硫工艺优选中的应用

电厂优选烟气脱硫工艺时必须进行切合实际的区域特性分析。石灰石—石膏湿法烟气脱硫工艺成熟、稳定、高效，且具有适应广东区域特点的诸多优势，故存在着广阔的发展前景。     

烟气循环流化床脱硫工艺的技术经济分析

介绍了烟气循环流化床的脱硫工艺及其流程，在与石灰石／石膏法脱硫工艺比对的基础上，进行了技术经济分析，并展望了在我国的应用前景。     

新型等离子体同时脱除多种烟气污染物净化系统

燃煤电厂烟气中各种污染物一般是混合在一起的,针对此实际情况将等离子体技术与传统静电除尘器相结合,改传统电除尘器电源为高压直流＋高频高压交流使之达到产生等离子体要求的电源,研制一种同时脱除烟气中PM2.5~PM10和多种气体污染物的新型烟气净化系统。该系统不仅可以同时脱除多种污染物,且不产生二次废弃物,其改造和运行费用均在接受范围内,因此是一种具有应用潜力的系统。     

喷雾干燥烟气脱硫工艺

阐述了喷雾干燥烟气脱硫工艺的性能、适用范围和优缺点。对该工艺的石灰浆制浆系统,喷雾塔设计、类型及该工艺的发展趋势作了具体介绍。     

火电厂烟气脱硫特许经营相关因素的分析

介绍火电厂SO2治理的新机制——特许经营政策出台的背景和主要内容,分析了对火电厂开展烟气脱硫特许经营的意义．探讨了其实施过程中存在的主要问题及解决方法。     

嵩屿电厂烟气海水脱硫工艺及特点分析

介绍了厦门嵩屿电厂4×300 MW燃煤机组烟气海水脱硫系统所选用的工艺,分析了海水FGD系统的主要技术特点,为日益增多的同类型脱硫装置的工艺设计与设备选型提供一定的借鉴.     

湿式石灰石烟气脱硫工艺现状和发展

系统地介绍湿式石灰石烟气脱硫工艺的流程、主要系统及设备、发展历史、现状和最新研究成果。     

A baseline study characterizing the municipal solid waste in the State of Kuwait

This paper provides a new reference line for municipal solid waste characterization in Kuwait. The baseline data were collected in accordance with the Standard Test Method for the Determination of the Composition of Unprocessed Municipal Solid Waste (ASTM). The results indicated that the average daily municipal waste generation level is 1.01 kg/person. Detailed waste stream surveys were conducted for more than 600 samples of municipal solid waste (MSW). The waste categories included paper, corrugated fibers, PET bottles, film, organic matter, wood, metal, glass, and others. The results indicated that organic waste dominated the characterization (44.4%), followed by film (11.2%) and then corrugated fibers (8.6%). Analysis of variance (ANOVA) was used to investigate the influence of season and governorate on waste composition. A significant seasonal variation was observed in almost all waste categories. In addition, significant differences in proportions between the current level and 1995 baseline were observed in most waste categories at the 95% confidence level.     

Determination of specific gravity of municipal solid waste

This investigation was conducted to evaluate experimental determination of specific gravity (G_s) of municipal solid waste (MSW). Water pycnometry, typically used for testing soils was adapted for testing MSW using a large flask with 2000 mL capacity and specimens with 100–350 g masses. Tests were conducted on manufactured waste samples prepared using US waste constituent components; fresh wastes obtained prior and subsequent to compaction at an MSW landfill; and wastes obtained from various depths at the same landfill. Factors that influence specific gravity were investigated including waste particle size, compaction, and combined decomposition and stress history. The measured average specific gravities were 1.377 and 1.530 for as-prepared/uncompacted and compacted manufactured wastes, respectively; 1.072 and 1.258 for uncompacted and compacted fresh wastes, respectively; and 2.201 for old wastes. The average organic content and degree of decomposition were 77.2% and 0%, respectively for fresh wastes and 22.8% and 88.3%, respectively for old wastes. The G_s increased with decreasing particle size, compaction, and increasing waste age. For fresh wastes, reductions in particle size and compaction caused occluded intraparticle pores to be exposed and waste particles to be deformed resulting in increases in specific gravity. For old wastes, the high G_s resulted from loss of biodegradable components that have low G_s as well as potential access to previously occluded pores and deformation of particles due to both degradation processes and applied mechanical stresses. The G_s was correlated to the degree of decomposition with a linear relationship. Unlike soils, the G_s for MSW was not unique, but varied in a landfill environment due both to physical/mechanical processes and biochemical processes. Specific gravity testing is recommended to be conducted not only using representative waste composition, but also using representative compaction, stress, and degradation states.     

Fabric-filter-supported catalyst for removal of harmful solid and gaseous compounds in municipal waste incinerator exhaust gas: characteristics of NO x reduction

We have investigated a fabric-filter-supported catalyst for removing harmful solid and gaseous compounds simultaneously from municipal incinerator exhaust gas. We studied the ways in which the efficiency of NO _x removal is influenced by filter temperature, gas flow rate, and catalyst content. The reduction of the catalyst content by mechanical reverse washing was investigated, and the state of the catalyst supported in the fabric filter was also observed using a scanning electron microscope. The catalyst supported by the fabric filter showed a removal efficiency above 75% when the filter temperature was 200°C, the gas flow rate was 1 m/min, and the catalyst content of the fabric filter was above 300 g/m². The catalyst was supported uniformly on the fibers of the fabric filter, and fine catalyst particles remained on the fibers after mechanical reverse washing. Received: October 15, 1997 / Accepted: March 19, 1999     

湿法烟气脱硫系统中烟气换热器的灰色综合评价

将灰色综合评价分析法引入湿法脱硫系统的烟气换热器综合评价,从技术和经济两个方面探讨了综合评价、优选烟气换热器的方法和过程,并以3种典型的烟气换热器技术为例进行了实际计算,给出了评价结果。     

嵩屿电厂烟气SCR脱硝工艺及特点分析

介绍了厦门嵩屿电厂4×300MW燃煤机组烟气选择性催化还原法(SCR)脱硝工程所选用的工艺,分析了SCR脱硝系统的主要技术特点,为日益增多的同类型脱硝装置的工艺设计与设备选型提供一定的借鉴。     

Simulation of co-incineration of sewage sludge with municipal solid waste in a grate furnace incinerator

Incineration is one of the most important methods in the resource recovery disposal of sewage sludge. The combustion characteristics of sewage sludge and an increasing number of municipal solid waste (MSW) incineration plants provide the possibility of co-incineration of sludge with MSW. Computational fluid dynamics (CFD) analysis was used to verify the feasibility of co-incineration of sludge with MSW, and predict the effect of co-incineration. In this study, wet sludge and semi-dried sludge were separately blended with MSW as mixed fuels, which were at a co-incineration ratios of 5 wt.% (wet basis, the same below), 10 wt.%, 15 wt.%, 20 wt.% and 25 wt.%. The result indicates that co-incineration of 10 wt.% wet sludge with MSW can ensure the furnace temperature, the residence time and other vital items in allowable level, while 20 wt.% of semi-dried sludge can reach the same standards. With lower moisture content and higher low heating value (LHV), semi-dried sludge can be more appropriate in co-incineration with MSW in a grate furnace incinerator.     

烟气多污染物系统一体化控制技术的研究

简要论述了燃煤烟气多污染物一体化控制技术,重点研究了系统一体化控制技术,采用该技术可以在燃煤电厂现有烟气治理装置基础上实现节能降耗。分析多污染物系统一体化控制技术方案,包括技术路线图、全流程模拟和DCS集成联锁及智能化控制,并介绍了系统一体化控制技术在贵州某电厂2×660 MW机组的示范应用。     

田家庵电厂灰水炉烟处理系统运行现状及分析

针对田家庵电厂5号机组炉烟处理系统的运行现状，对结垢原因、除垢原理、运行参数分别进行了阐述。通过试验数据的统计分析，对系统有了完整的评价和认识，并就系统的安全、稳定运行提出了建议。     

Optimal planning for the sustainable utilization of municipal solid waste

The increasing generation of municipal solid waste (MSW) is a major problem particularly for large urban areas with insufficient landfill capacities and inefficient waste management systems. Several options associated to the supply chain for implementing a MSW management system are available, however to determine the optimal solution several technical, economic, environmental and social aspects must be considered. Therefore, this paper proposes a mathematical programming model for the optimal planning of the supply chain associated to the MSW management system to maximize the economic benefit while accounting for technical and environmental issues. The optimization model simultaneously selects the processing technologies and their location, the distribution of wastes from cities as well as the distribution of products to markets. The problem was formulated as a multi-objective mixed-integer linear programing problem to maximize the profit of the supply chain and the amount of recycled wastes, where the results are showed through Pareto curves that tradeoff economic and environmental aspects. The proposed approach is applied to a case study for the west-central part of Mexico to consider the integration of MSW from several cities to yield useful products. The results show that an integrated utilization of MSW can provide economic, environmental and social benefits.     

Municipal solid waste management: Identification and analysis of engineering indexes representing demand and costs generated in virtuous Italian communities

The definition and utilisation of engineering indexes in the field of Municipal Solid Waste Management (MSWM) is an issue of interest for technicians and scientists, which is widely discussed in literature. Specifically, the availability of consolidated engineering indexes is useful when new waste collection services are designed, along with when their performance is evaluated after a warm-up period. However, most published works in the field of MSWM complete their study with an analysis of isolated case studies. Conversely, decision makers require tools for information collection and exchange in order to trace the trends of these engineering indexes in large experiments. In this paper, common engineering indexes are presented and their values analysed in virtuous Italian communities, with the aim of contributing to the creation of a useful database whose data could be used during experiments, by indicating examples of MSWM demand profiles and the costs required to manage them.