Preparations of organobentonite using nonionic surfactants

Due to hydrophilic environment at its surface, natural bentonite is an ineffective sorbent for nonpolar nonionic organic compounds in water even though it has high surface area. The surface properties of natural bentonite can be greatly modified by simple ion-exchange reactions with large organic cations (cationic surfactants) and this organobentonite is highly effective in removing nonionic organic compounds from water. Cationic surfactant derived organobentonites have been investigated extensively for a wide variety of environmental applications. In this study, the preparation of organobentonite using nonionic surfactants has been investigated for the first time. Results indicate that nonionic surfactants intercalates into the interlamellar space of bentonite and may demonstrate higher sorption capacity than cationic surfactant. It is possible to create large interlayer spacing and high organic carbon content organobentonite by use of nonionic surfactants with suitable balance between the hydrocarbon and ethylene oxide chain lengths. In addition, nonionic surfactant derived organobentonites are more chemically stable than cationic surfactant derived organobentonites.     

Influence of special surfactants on the microbial degradation of mineral oils

Various surfactants belonging to the group of fatty acid-acylated amino acids were tested for their ability to accelerate the microbial degradation of mineral oil. Of the lauric acid-acylated amino acids, aliphatic acids and histidine were found to be the most suitable. By the aid of these compounds additional 20-60% of a residual oil fraction could be degraded. The longer the chain of the fatty acid moiety, the more effective the surfactants are. Natural L-amino acids were more effective than their D-configuration. Since the special surfactants are easily biologically degradable, multiple replenishment is required in long-term experiments. The faster, more complete degradation of mineral oil is caused solely by interfacial activity; the growth of biomass due to the function of surfactants as substrate had no effect.     

Sonochemically induced decomposition of energetic materials in aqueous media

This study demonstrates that ultrasound rapidly degrades the energetic compounds RDX (cyclo-1,3,5-trinitramine-2,4,6-trimethylene) and ADN (ammonium dinitramide) in aqueous microheterogeneous media. The conditions for effective degradation of these nitramines, as monitored by UV absorption spectroscopy, were determined by varying sonication time, the heterogeneous phase and its suspension density, and the concentration of NaOH. In the presence of 5 mg/ml of aluminum powder and at pH approximately 12 (10 mM NaOH), 74% of the RDX and 86% of the ammonium dinitramide (ADN) in near-saturated solutions decompose within the first 20 min of sonication (20 kHz; 50 W; < or =5 degrees C). Sonication without Al powder and base yields minimal degradation of either RDX and ADN (approximately 5-10%) or the nitrite/nitrate ions that are expected byproducts during RDX and ADN degradation. Sonication at high pH in the presence of dispersed aluminosilicate zeolite, alumina, or titanium dioxide also yields minimal degradation. Preliminary electrochemical studies and product analyses indicate that in situ ultrasonic generation of metallic aluminum and/or aluminum hydride drives reductive denitration of the nitramines. Sonochemical treatment in the presence of a reductant offers an effective and rapid waste remediation option for energetic waste compounds.     

Sonolytic reactions of phenanthrene in organic extraction solutions

Ultrasonic extraction is a common method used to extract semi-volatile and nonvolatile organic compounds such as polycyclic aromatic hydrocarbons (PAHs) from solid matrices. However, ultrasonic energy has been suspected to lead to undesired reactions of the solute and thus affect qualitative and quantitative results. In this paper, sonolytic reactions of phenanthrene in common organic extraction solutions were examined using a 20 kHz ultrasonic probe under conditions commonly used for ultrasonic extraction. Extraction parameters including phenanthrene concentration, solvent type, pulse length, and sonication time were investigated. Hexane:acetone (1:1 V/V) resulted in less phenanthrene degradation than dichloromethane (DCM):acetone (1:1 V/V). Initial solute concentration, length of sonication time, and solvent type affected the degradation of phenanthrene. Reaction byproducts including methylphenanthrene and methylnaphthalene detected after sonication indicate that phenanthrene reacts by both direct pyrolysis and reaction with methyl or ethyl radicals formed from solvent pyrolysis.     

Biodegradation of phenanthrene in soil.

We investigated the potential of an aerobic polycyclic aromatic hydrocarbon (PAH)-adapted consortium to degrade phenanthrene in soil. Optimal degradation conditions were determined as pH7.0 and 30 degrees C with a water content of 100% wt soil/wt water (w/w). At a concentration of 5 microg/g, phenanthrene degradation (k1) was measured at 0.0269 l/hr with a half-life (t(1/2)) of 25.8 hrs. Our results show that the higher the phenanthrene concentration, the slower the degradation rates. Phenanthrene degradation was enhanced by treatment with yeast extract, glucose, or pyruvate, but was not significantly improved by the addition of acetate. Degradation was delayed by the addition of either compost or potassium nitrate and enhanced by the addition of nonionic surfactants (Brij30, Brij35, Triton X100 or Triton N101) at critical micelle concentration (CMC). Phenanthrene degradation was delayed at levels above CMC.     

Toxicological response of a bioluminescent microbial assay to Zn, Pb and Cu in an artificial soil solution: relationship with total metal concentrations and free ion activities.

The relationship between toxicological response and both total concentrations and free ion activities of Pb, Cu and Zn in an artificial soil solution has been investigated using lux-marked Escherichia coli HB101 (pUCD607) as a bioassay. SO4(2-) (as K2SO4) was added as an inorganic complexing agent up to 0.01 M representing the range of ionic strengths found in soil solutions and giving a wide range of free metal ion activities. EC50 values expressed in terms of concentration, varied significantly with K2SO4 molarity for all metals. However, when EC50 values were expressed in terms of free ion activity they were not significantly different for Pb and Zn, supporting the free ion activity model. Conversely, EC50 values expressed as free Cu activity did vary significantly with K2SO4 molarity, possibly due to a greater degree of adsorption of Cu onto inactive sites on the cell surfaces than for Zn and Pb. Linear regression analysis of bioluminescence on free ion activity revealed significant correlations for each metal above the toxicity threshold. In conclusion, lux-marked E. coli is suitable for investigating the toxicity of metal ions and complexes in non saline systems although cell surface adsorption effects could be important for some metals, e.g. Cu.     

Sonolysis of alkylphenols in aqueous solution with Fe(II) and Fe(III)

The sonolytic degradation of alkylphenols (APs), such as butylphenol, pentylphenol, octylphenol, and nonylphenol (NP), in water was investigated at a sound frequency of 200 kHz with an acoustic intensity of 6 W cm(-2) under argon, oxygen, and air atmospheres. The sonolytic degradation rate of the APs under the conditions of the present study depended upon their alkyl chain length. The decrease in the degradation rate by the radical scavenging effect was in the range of about 48-82% for APs in the presence of 3 mM 2-methyl-2-propanol. The free radicals play a significant role in the sonolytic degradation process of the APs. In the presence of Fe(II) and Fe(III), the pseudo-first-order rate constants for the sonolytic degradation of 30 microM NP as a function of the concentration of Fe(II) and Fe(III) were estimated under argon and oxygen. The maximum rate constants were observed at 50 microM Fe(II) (0.139 +/- 0.008 min(-1)) and 100 microM Fe(III) (0.103 +/- 0.001 min(-1)) under oxygen. The total organic carbon concentration (TOC) was investigated under same conditions. TOC decreased in the range of about 50-70% during the sonication in the presence of Fe(II) and Fe(III) under argon and oxygen. The sonochemical effects by the addition of Fe(II) and Fe(III) as catalyst during the sonication under the proper atmosphere result in a remarkable enhancement of degradation and mineralization.     

Fate and effect of monoalkyl quaternary ammonium surfactants in the aquatic environment

The effect of the alkyl chain of quaternary ammonium-based surfactants on their aquatic toxicity and aerobic biodegradability has been studied. Two families of monoalkylquats surfactants were selected: alkyl trimethyl ammonium and alkyl benzyl dimethyl ammonium halides. Acute toxicity tests on Daphnia magna and Photobacterium phosphoreum were carried out and EC50 values in the range of 0.1-1 mg/l were obtained for the two series of cationic surfactants. Although the substitution of a benzyl group for a methyl group increases the toxicity, an incremental difference in toxicity between homologs of different chain length were not observed. Biodegradability of the different homologs was determined not only in standard conditions but also in coastal water, both tests yielding similar results. An increase in the alkyl chain length or the substitution of a benzyl group for a methyl group reduces the biodegradation rate. The degradation of these compounds in coastal waters was associated with an increase in bacterioplankton density, suggesting that the degradation takes place because the compound is used as a growth substrate.     

Biodegradation of polycyclic aromatic hydrocarbons by a mixed culture

We investigated the potential biodegradation of polycyclic aromatic hydrocarbons (PAHs) by an aerobic mixed culture utilizing phenanthrene as its carbon source. Following a 3-5 h post-treatment lag phase, complete degradation of 5 mg/l phenanthrene occurred within 28 h (optimal conditions determined as 30 degrees C and pH 7.0). Phenanthrene degradation was enhanced by the individual addition of yeast extract, acetate, glucose or pyruvate. Results show that the higher the phenanthrene concentration, the slower the degradation rate. While the mixed culture was also capable of efficiently degrading pyrene and acenaphthene, it failed to degrade anthracene and fluorene. In samples containing a mixture of the five PAHs, treatment with the aerobic culture increased degradation rates for fluorene and anthracene and decreased degradation rates for acenaphthene, phenanthrene and pyrene. Finally, it was observed that when nonionic surfactants were present at levels above critical micelle concentrations (CMCs), phenanthrene degradation was completely inhibited by the addition of Brij 30 and Brij 35, and delayed by the addition of Triton X100 and Triton N101.     

Toxic effect of surfactants and probable products of their biodegradation on methanogenesis in an anaerobic microbial community.

Surfactants used in household and various industries, are rather toxic; therefore, the accumulation of these compounds in the environment through wastewaters has challenged the problem of their biodegradation. In this research, an attempt was made to assess the toxic effect of various surfactants and the likely products of their biodegradation on the acetoclastic methanogens of an anaerobic microbial community. Among the substances investigated, cationic surfactants were found to be most toxic to methanogens: 154 mg/l alkamon DS and 345 mg/l catamin AB induced a 50% inhibition of methanogenesis. Toxicity studies of some aromatic and cyclic compounds, as the probable products of biodegradation of alkylbenzene sulfonate surfactants, showed that methanogenesis in the microbial community under study are rather tolerant to high concentrations of these compounds.     

Joint influence of surfactants and humic matter on PAH solubility. Are mixed micelles formed?

Mobilization of polycyclic aromatic hydrocarbons (PAH) by surfactants, present at contaminated sites or deliberately introduced for remediation purposes, is inevitably associated with the influence of humic substances, which are ubiquitous in natural systems. Therefore, the solubilizing effects of anthropogenic and natural amphiphiles must be considered in their combined action since synergistic or antagonistic effects may be expected, for instance, as a consequence of mixed micellization.

In this paper, solubilization of ¹⁴C-labeled pyrene in single-component and mixed solutions of surfactants and humic acid (coal-derived) was investigated up to the micellar concentration range. At low concentrations, antagonistic effects were observed for systems with cationic as well as anionic surfactants. Solubility enhancements in the presence of humic acid were canceled on addition of a cationic surfactant (DTAB) since charge compensation at humic colloids entailed precipitation. Solubility was also found to be decreased in the presence of an anionic surfactant (SDS), which was attributed to a competitive effect in respect of pyrene–humic interaction. This explanation is based on octanol–water partitioning experiments with radiolabeled humic acid, yielding evidence of different interaction modes between humic colloids and cationic/anionic surfactants. At higher concentrations, the effects of humic acid and SDS were found to be additive. Thus, a formation of mixed micelles is very unlikely, which was confirmed by size exclusion chromatography of mixed systems. It can be concluded that remediation measures on the basis of micellar solubilization are not significantly affected by the presence of natural amphiphilic compounds.     

Bioremediation of tributyltin contaminated sediment: degradation enhancement and improvement of bioavailability to promote treatment processes

Bioremediation of tributyltin (TBT) contaminated sediment was studied and degradation enhancement and improvement of bioavailability were also investigated. In TBT spiked sediment, the half-life of TBT in the control sample, representing natural attenuation, was 578 d indicating its persistence. In the stimulated sample (pH 7.5, aeration and incubated at 28 °C), the half-life was significantly reduced to 11 d. Further stimulation by nutrient addition (succinate, glycerol and l-arginine) or inoculation with Enterobacter cloacae (∼10⁷ viable cells g⁻¹ of sediment) resulted in half-life reduction to 9 and 10 d, respectively. In non-spiked sediment, the indigenous microorganisms were able to degrade aged TBT, but the extended period of contamination decreased the degradation efficiency. To improve bioavailability, addition of surfactant, adjustment of salinity and sonication were studied. The highest percentage solubilisation of TBT in water was obtained by adjusting salinity to 20 psu, which increased the solubility of TBT from 13% to 33%. Half-lives after bioavailability was improved were 5, 4 and 4 d for stimulation, stimulation w/nutrient addition and stimulation w/inoculation, respectively. However, natural attenuation in the control sample was not enhanced. The results show that providing suitable conditions is important in enhancing TBT biodegradation, and bioavailability improvement additionally increased the rate and degraded amount of TBT. Unfortunately, nutrient addition and inoculation of the degrader did not enhance the degradation appreciably.     

Photocatalytic degradation of bentazone in soil washing wastes containing alkylpolyoxyethylene surfactants

Three alkylpolyoxyethylene surfactants bearing the same hydrophobic chain and a different number of oxyethylene groups were investigated as suitable candidates for the soil washing treatment of contaminated soil samples containing bentazone. Comparable good recoveries of the pesticide were obtained working with these surfactants. The photocatalytic treatment of the collected washing wastes, performed in the presence of suspended TiO₂ particles under irradiation with simulated sunlight, leads to the effective degradation of bentazone residues after a time depending on the nature and concentration of the chosen amphiphile. Brij 35 was found to be the best surfactant candidate, giving the faster abatement of the pesticide in the collected wastes. The overall treatment time depends on the bentazone mineralization kinetics, markedly slow in the presence of surfactants. Useful information about the photocatalytic degradation route was obtained from the HPLC-MS analysis of transient intermediates formed in water.     

Water purification by sulfide-containing activated carbon

We investigated a new kind of activated carbon named gaiasafe-Formstoff [1] as an agent for powerful heavy metal reduction. This activated carbon contains highly dispersed sulfide compounds. Our investigations with lead containing wastewaters showed an outstanding metal sulfide precipitation power of the new agent. The lead reduction rates are independent of wastewater parameters like lead concentration and complexing agent concentration. Contacted as powder or as a fixed bed with wastewater gaiasafe-Formstoff showed the best cleaning capacity in comparison to all other agents tested. Investigations with gaiasafe-Formstoff about its ability to reduce the contents of further heavy metals in wastewater are under way. The gaiasafe-Formstoff reaction products with wastewater represent an energy-rich and raw material-rich resource when fed to metallurgical processes.     

Degradation of industrial surfactants by photocatalysis combined with ozonation

The efficiency of titanium dioxide-mediated photocatalytic degradation of pollutants can be enhanced by combination with another advanced oxidation procedure such as ozonation. Mineralization of hydroxy- and dihydroxybenzenesulfonate based on these methods, both individually and combined, was investigated by monitoring the total organic carbon content, sulfate concentration, pH, high-performance liquid chromatography as well as the absorption spectral changes. The mineralization efficiency of the combined procedure significantly exceeded the sum of those of the individual techniques. The comparison of the disappearance of the starting material and the formation of the sulfate ions indicates that desulfonation is not the primary step of the degradation. Moreover, in the case of the combined method, ring cleavage, and thus, partial mineralization can occur without desulfonation. Efficient degradation of other, widely used industrial surfactants, such as alkylbenzene sulfonates and alkyl ether sulfates, was also achieved by heterogeneous photocatalysis combined with ozonation, offering an applicable method for the removal of these pollutants.     

Electrochemical degradation of Acid Blue and Basic Brown dyes on Pb/PbO2 electrode in the presence of different conductive electrolyte and effect of various operating factors

Electrocatalytic degradation of Acid Blue and Basic Brown dyes from simulated wastewater on lead dioxide anode was investigated in different conductive electrolytes. It was shown that complete degradation of these dyes is dependent primarily on type and concentration of the conductive electrolyte. The highest electrocatalytic activity was achieved in the presence of NaCl (2g/l) and could be attributed to indirect oxidation of the investigated dyes by the electrogenerated hypochlorite ions formed from the chloride oxidation. In addition, contribution from direct oxidation could also be possible via reaction of these organic compounds with the electrogenerated hydroxyl radicals adsorbed on the lead dioxide surface. In the presence of NaOH, the electrocatalytic activity of the employed anode was not comparable to that in NaCl due primarily to the absence of chloride. This indicates that dyes degradation in NaOH occurs exclusively via direct electrochemical process. However, in H2SO4, the electrode performance was poor due partially to the absence of chloride from the conductive solution. The possibility of electrode poisoning as a result of growth of adherent film on the anode surface or production of stable intermediates not easily further oxidized by direct electrolysis in H2SO4 might also be accountable for the poor performance observed in this conductive electrolyte. Optimizing the conditions that ensure effective electrochemical degradation of Acid Blue and Basic Brown dyes on lead dioxide electrode necessitates the control of all the operating factors.     

Assessment of a process to degrade metal working fluids using Pseudomonas stutzeri CECT 930 and indigenous microbial consortia

The development of a novel biological process to treat metal working fluids (MWFs)-containing effluents at bioreactor scale was pursued in this work. The bacteria Pseudomonas stutzeri CECT 930 was investigated for the first time as an alternative agent for MWF degradation. An adequate medium design and mixing and aeration system, as well as an appropriate microorganism proved to be crucial for reaching high levels of degradation by P. stutzeri and by an indigenous consortium (about 70% and 50% of reduction in total petroleum hydrocarbon content in less than 2 wk, respectively). Additionally, as there is no information in literature trying to kinetically characterize an MWF-polluted effluent degradation process, all the experimental data were fitted to logistic and Luedeking and Piret models, that allowed to elucidate the growth-associated character of the biodegradation process.     

Biosorption of copper(II) from aqueous solutions by pre-treated biomass of marine algae Padina sp

Biosorption of heavy metals can be an effective process for the removal and recovery of heavy metal ions from aqueous solutions. The biomass of marine algae has been reported to have high uptake capacities for a number of heavy metal ions. In this paper, the adsorption properties of a pre-treated biomass of marine algae Padina sp. for copper(II) were investigated. Equilibrium isotherms and kinetics were obtained from batch adsorption experiments. The biosorption capacities were solution pH dependent and the maximum capacity obtained was 0.80 mmol/g at a solution pH of about 5. The biosorption kinetics was found to be fast, with 90% of adsorption within 15 min and equilibrium reached at 30 min. The effects of light metal ions on copper(II) uptake were studied and the presence of light metal ions did not affect copper(II) uptake significantly. Fixed-bed breakthrough curves for copper(II) removal were also obtained. This study demonstrated that the pre-treated biomass of Padina sp. could be used as an effective biosorbent for the treatment of copper(II) containing wastewater streams.     

Biodegradation and detoxification of organophosphate insecticide, malathion by Fusarium oxysporum f. sp. pisi cutinase

Efficiencies of two lypolytic enzymes (fungal cutinase and yeast esterase) in malathion degradation were investigated. Surprisingly, degradation rate of malathion by fungal cutinase was very high, i.e. almost 60% of initial malathion (500 mg l(-1)) was decomposed within 0.5 h, and nearly 50% of the degraded malathion disappeared within initial 15 min. With the yeast esterase, despite the same concentration, more than 65% of malathion remained even after 2-day treatment. During enzymatic degradation of malathion, two malathion-derived compounds were detected, and time-course changes in composition were also monitored. In the degradation by both fungal cutinase and yeast esterase, two additional organic chemicals were produced from malathion: malathion monoacid (MMA) and malathion diacid (MDA) by ester hydrolysis. Final chemical composition after 2 d was significantly dependent on the enzyme used. Fungal cutinase produced MDA as a major degradation compound. However in the malathion degradation by yeast esterase, an isomer of MMA was produced in abundance in addition to MDA. Toxic effects of malathion and its final degradation products were investigated using various recombinant bioluminescent bacteria. As a result, the degradation products (including MMA) by esterase severely caused membrane damage and inhibition of protein synthesis in bacterial cells, while in the fungal cutinase processes, malathion was significantly degraded to non-toxic MDA after the extended period (2 days).     

The influence of organic ligands on the retention of lead in soil

Organic acids are commonly produced and exuded by plant roots and soil microorganisms. Some of these organic compounds are effective chelating agents and have the potential to enhance metal mobility. The effect of citrate and salicylate on the leaching of lead in soil was investigated in a laboratory experiment. In short-term batch experiments, adsorption of lead to soil was slightly enhanced with increasing salicylate concentration (500-5000 microM) but decreased significantly in the presence of citrate. These observations suggested that citrate may enhance Pb leaching, but this was not observed in the column study. Soluble Pb in the presence and absence citrate or salicylate (up to 5000 microM) was added to soil columns at a moderate flow rate, but no Pb was observed to emerge from the soil in any of the soil columns. Rapid biodegradation of citrate in soil eliminated potential complexing ability. Breakthrough of Pb from soil was noted only when using small columns at high flow rates (>20 pore volumes per day). Under these conditions of physical and chemical non-equilibrium, citrate was not degraded and significantly enhanced Pb mobility. As in the batch adsorption experiments, the presence of salicylate reduced Pb leaching. Considering the extreme conditions required to induce Pb leaching, it is likely that Pb will remain relatively immobile in soil even in the presence of a strong complexing agent such as citrate.