Experimental analysis of thermal performance of evacuated tube and flat-plate solar air collectors at different air flow rates

The thermal performances of an evacuated tube collector (ETC) and flat-plate solar air collector (FPC) are experimentally investigated at different air flow rates. To investigate the performance of the ETC and FPC, experimental set-ups were fabricated. Air was used as a working fluid and tested at the same climatic conditions. The ETC had 15 evacuated tubes with a surface area of 1.66 m². The experimental set-up consisted of a header with a hollow pipe (square pipe) in the centre through which the air flowed. The flat-plate collector had a surface area of 1.35 m². The FPC had a black painted absorber sheet which divides the collector into two sections. The air flowed through the upper and the lower sections parallel to the collector to minimize the overall heat loss. The temperature of the outlet air depends on several factors along with the airflow rate and the intensity of the solar radiation. It was found that during the day at high flow rates, the efficiency of the ETC varies from 0.12 to 0.5, and for the flat plate it was from 0.29 to 0.68. The maximum temperature of the air was 56.7°C for the ETC and 25.7°C for the FPC.     

Global trends and development of energy services industry in China

Energy service is an effective way to promote energy conservation by market mechanisms, including energy saving services, energy procurement, supply of many varieties of energy, supply of renewable energy technologies, energy-related consulting services, risk management, etc. China is a major energy consumer but energy is in short supply, and the efficiency of energy use is low. China’s energy service industry has expanded rapidly, in terms of both the number of new Energy Service Companies entering the market and amount of capital invested in Energy Performance Contracting projects, but the energy service sector in China is still at an early stage of development. Developed countries began early in developing the energy service sector and their energy service market is mature, and the experience of developed countries shows that energy services play a significant role in advancing energy saving and emission reduction. Under the new situation, China needs combine energy services experience of developed countries, and take following measures to accelerate China’s energy services rapid and healthy development, including the long-term aspects of policy planning, energy-saving core technology, finance and capital investment, public sector reductions, personnel training, and so on.     

新能源汽车补贴政策工具挖掘及量化评价

现阶段中国大力开展新能源汽车示范推广工作,中央及各地方政府已相继出台一系列补贴政策。在严厉打击新能源汽车"骗补"及补贴政策重新调整等背景下,分析梳理现有政策从而对其进行整体把握与正确判断显得尤为重要,从而为政策改进与优化做准备。本文选取了截至2016年底国家和北京市颁布的涉及新能源汽车补贴的相关政策。首先,从采用文本挖掘的方法整理出的政策文本的高频有效关键词从中提炼出的政策工具,可分为供给型、需求型、环境型三类,分别从技术推动、市场拉动和环境支撑三个方面促进和规范新能源汽车市场。发现现有政策工具仍存在一些问题,如缺乏支持新能源汽车技术提升和产品开发的供给型政策工具;环境型政策工具的作用重点欠科学,对充电基础设施建设的重视程度不够;补贴过于聚焦新能源汽车购买环节等。其次,结合政策特点运用PMC指数模型构建了新能源汽车补贴政策的量化评价框架,通过变量分类、参数识别建立了多投入产出表,并通过PMC指数的测量、PMC曲面的生成综合反映政策各维度的情况。再次,采用实证分析的方法,选取3项新能源汽车补贴政策(P1、P2、P3)为研究对象,对政策进行量化评价。结果得出3项政策的PMC指数分别为7.52、6.95、6.21,均在良好的等级之内,P1政策的量化结果为优秀,P2、P3政策结果为良好,且具有较大的提升空间,可考虑在激励措施等方面予以加强。最后,根据新能源汽车补贴政策无法取得预期效果的原因,提出三点政策优化意见:(1)重视供给型政策工具的使用,加大新能源汽车科研资金投入;(2)环境型政策工具的作用重点应放在充电等基础设施的建设上;(3)需求型可考虑采取以公共交通带动私人交通的策略。     

Performance of a hybrid solar collector system in days with stable and less stable radiative regime

The aim of this work is to analyse the performance of a solar energy collector system for water and air heating in real working conditions. Two coupled mathematical models have been developed. One of them describes the thermal behaviour of the Hybrid Solar Collector (HSC) and the second one describes the simultaneous operation of the HSC and of a fully mixed water storage tank. The dependence of the performance of the HSC system on the following three parameters has been studied: (1) water and air mass flow rate; (2) water pipe diameter and air channel height; (3) water storage tank volume. The mathematical models were used to evaluate the HSC system performance during 29 different days, covering all four seasons. A higher water flow rate generally enhances the thermal efficiency of the HSC system, but the enhancement became significantly smaller at higher air flow rates. Positive but small values are recommended for the difference between the fluid temperature at solar collectors exit and the water temperature in the tank. The thermal efficiency of the HSC system is higher on nearly clear sky and decreases in case the amount of clouds on the sky increases.     

The influence of heterogeneous environmental regulation on the green development of the mining industry: empirical analysis based on the system GMM and dynamic panel data model

The intensity of environmental regulation (ERI) affects the short-term effect of the level of green mining (GML), and which structure determines the long-term mechanism. Based on the panel data from 2001 to 2015, with the dynamic panel model and system GMM estimation method were employed to test the influence of heterogeneous environmental regulation on green mining and its transmission mechanism. The results show that, there is a “U” type nonlinear relationship between the ERI and GML. The direct effect of command-control-based (CAC) and the market incentive-based (MBI) environmental regulation on green development of mining shows the characteristics of inhibition and promotion. There is a “U” type of indirectly moderating effect between technological innovation and the energy consumption structure on the GML. The technological innovation promotes the green development of the mining industry only after pass the inflection point of MBI, while the CAC plays a significant guiding role in upgrading of the energy consumption structure. There is an inhibition and promotion effect of MBI on the GML in the southeast coastal area, and the CAC is not significantly. Meanwhile, both of the ERI shows no positive effects in the central and western inland region.     

我国减缓碳排放的近期形势与远期趋势分析

近3年来我国面临GDP能源强度呈上升趋势，能源消费及相应CO2排放增长对世界减缓碳排放的形势产生了更大影响的新的形势，从长远发展趋势看，我国当前由于工业特别是重化工业在国民经济结构中急剧增加引起的GDP能源强度阶跃性增长将随产业结构的稳定两平缓，并且随产业结构的优化和产业技术升级及高附加值产品比例提高而再度呈持续稳定下降的趋势。我国在现代化道路中与发达国家的历程相比，可以走更为节约能源和减少CO2排放的道路。但由于中国人口众多，和平发展的规模大、速度快，而且时间比发达国家滞后半个世纪以上，我国为实现现代化所必需的能源消费和CO2排放的增长会对全球的碳排放增长产生重大影响。这将使我国未来经济发展面临极为不利的外部环境。     

CGE model-based analysis of the neutralized hybrid carbon policy and its decomposed effects on economic growth,carbon reduction,and energy utilization costs

The hybrid policy is a flexible policy tool that combines features of carbon trading and carbon taxation.Its economic and environmental effects under China's background are still not studied in detail.Given the exogenous carbon reduction targets,carbon prices,and carbon tax-rates,by computable general equilibrium modeling methods and factor decomposition methods,this article investigates direct and cascaded effects of the hybrid policy on economic growth,energy utilization,and carbon emission on the national level and the sector level,with China's national input-output data-set.Stepwisely,policy scenarios with irrational estimated results are selectively excluded based on comprehensive evaluation among economic,carbon reduction and other policy targets.As a result,against national economic conditions in 2007,the hybrid policy,with a carbon reduction target of -10%,a carbon tax-rate of around $10,and a ceiling carbon price of $40,is highly recommended,because of its significant lower economic loss,lower energy utilization cost,and practical robustness against fluctuation of energy market and carbon market.Furthermore,by decomposition analysis,carbon reduction-related costs are decomposed into a direct part that includes carbon allowance price and carbon tax,and an indirect part as the energy price incremental induced by direct carbon costs.Gross carbon reduction may be decomposed into three parts such as energy intensity,economic scale,and technical progress.And,carbon taxation is the main policy tool that stimulates to improve the energy efficiency.     

基于LCA的废旧资源循环利用节能减排效果评估模式与方法研究——以吉林省某钢铁企业为例

促进废旧资源循环利用是加快推进我国生态文明建设,完成节能减排目标的必然选择。本文基于生命周期评价模式,从微观企业层面入手,构建产品全生命周期基准流程,引入能量输入与环境输出参数,建立废旧资源循环利用节能减排效果量化核算模型,评估再生产品的节能减排经济成效,并以吉林省某钢铁企业为例,评估"废钢-电炉"短流程和"铁矿石-高炉-转炉"长流程的能源、环境、成本差异,辨识影响废钢再循环节能减排效果的主要因素和重要环节。结果显示,再生钢铁全生命周期与原生钢铁全生命周期相比,节能588.48kgce/t,节能率为84%;主要污染物中SO2减排率最高,达92%;CO2总减排1 180.92 kg/t,减排率为67%;总成本却高出198元/t。其中,炼铁工序的节能量和减碳量最大,烧结工序SO2、NOx和烟(粉)尘减排量最大,焦化工序COD和氨氮减排量最大,回收、加工处理、炼钢环节节能量和减碳量以及SO2、NOx和烟(粉)尘减排量均为负。成本方面,再生钢铁生产成本高于原生钢铁308元/t,虽然再生钢铁由于污染减排可节省56元/t的排污费并获取54元/t的碳交易收益,但都不足以扭转电炉炼钢费用较高的现状。因此,国家应在电炉炼钢方面给予钢企及相关企业适当的财税扶持政策,在电价方面给予钢企一定的优惠或补贴,并完善废钢回收加工体系等,以促进废钢循环利用。基于LCA的废旧资源循环利用节能减排效果评估可以实现对产品生命周期全过程的资源、环境、成本的优化管理。