Effect of wearing hearing protectors on the audibility of railway warning signals – an experimental study

The effect of wearing hearing protectors on the audibility of warning signals has been evaluated for three specific railway-related jobs: track workers, train drivers and platform agents. Masked thresholds were measured in the laboratory, on railway agents with normal hearing, using warning signals and background noises typical of each job. Out of the 36 situations tested in total, statistical analyses showed that wearing earplugs improves the perception in 11 situations, deteriorates the perception in 10 situations and has no significant effect in 15 situations (as compared to no hearing protector). The deteriorations essentially concern signals which have no (or not enough) energy in the low-frequency range (ff相似文献   

The effectiveness of lane departure warning systems—A reduction in real-world passenger car injury crashes

Objective: The objective of this study was to estimate the safety benefits of in vehicle lane departure warning (LDW) and lane keeping aid (LKA) systems in reducing relevant real-world passenger car injury crashes.

Methods: The study used an induced exposure method, where LDW/LKA-sensitive and nonsensitive crashes were compared for Volvo passenger cars equipped with and without LDW/LKA systems. These crashes were matched by car make, model, model year, and technical equipment; that is, low-speed autonomous emergency braking (AEB) called City Safety (CS). The data were extracted from the Swedish Traffic Accident Data Acquisition database (STRADA) and consisted of 1,853 driver injury crashes that involved 146 LDW-equipped cars, 11 LKA-equipped cars, and 1,696 cars without LDW/LKA systems.

Results: The analysis showed a positive effect of the LDW/LKA systems in reducing lane departure crashes. The LDW/LKA systems were estimated to reduce head-on and single-vehicle injury crashes on Swedish roads with speed limits between 70 and 120 km/h and with dry or wet road surfaces (i.e., not covered by ice or snow) by 53% with a lower limit of 11% (95% confidence interval [CI]). This reduction corresponded to a reduction of 30% with a lower limit of 6% (95% CI) for all head-on and single-vehicle driver injury crashes (including all speed limits and all road surface conditions).

Conclusions: LDW/LKA systems were estimated to lower the driver injury risk in crash types that the systems are designed to prevent; that is, head-on and single-vehicle crashes. Though these are important findings, they were based on a small data set. Therefore, further research is desirable to evaluate the effectiveness of LDW/LKA systems under real-world conditions and to differentiate the effectiveness between technical solutions (i.e., LDW and LKA) proposed by different manufacturers.     

Driver distraction by digital billboards? Structural equation modeling based on naturalistic driving study data: A case study of Iran

Introduction: Digital billboards (DBs) are a competing factor for attracting drivers’ attention; evidence shows that DBs may cause crashes and vehicle conflicts because they catch drivers’ attention. Because of the complexity of a system that includes road conditions, driver features, and environmental factors, it is simply not possible to identify relationships between these factors. Thus, the present study was conducted to provide a well-organized procedure to analyze the effects of DBs on drivers’ behavior and measure factors responsible for drivers’ distraction in Babol, Iran, as a case study. Method: Corresponding data were collected through a Naturalistic Driving Study (NDS) of 78 participants when facing DBs (1,326 samples). These data were analyzed by applying structural equation modeling (SEM) to concurrently recognize relationships between endogenous and exogenous variables. Human, environmental, and road factors were determined as exogenous latent variables in a model to evaluate their influences on drivers’ distraction as an endogenous variable. Results: The results showed that road, environmental, and human factors reciprocally interact with drivers’ distraction, although the estimated coefficient of human factors was more of a factor than that of the other groups. Furthermore, younger drivers, beginner drivers, and male drivers (as human factors); night and unclear weather like a rainy day (as environmental factors); and installing DBs at complicated traffic positions like near-intersections (as road factors) were determined to be the main factors that increase the possibility of drivers’ distraction. Finally, model assessment was suggested using the goodness-of-fit indices.     

The role of component arrangement in complex safety instrumented systems—A case study

The arrangement of components plays a key role in the performance of complex Safety Instrumented Systems (SIS), in which a SIS logic solver is interlocked with other logic solvers, to share a final element, for instance. The position of the components and the way they are utilized affects the reliability characteristics, such as the Probability of Failure on Demand (PFD), Spurious Trip Rate (STR), architectural sensitivity and model uncertainty. This case study uses quantitative and qualitative approaches to elaborate on various aspects of component arrangement in complex SIS. Numerous simplified models are analyzed; new classification is introduced for SIS components based on their response to demand; a set of guidelines are developed for SIS architecture design, with a focus on component arrangement; and the use of these guidelines is demonstrated in a real-life example, where an existing turbine SIS is modified to incorporate a new over-speed protection system. The simplified models and the turbine upgrade project are also used to explain the issue of unknowns and uncertainties in reliability analysis and how these issues can be addressed in SIS architecture by optimizing component arrangement.     

A societal risk study for transportation of class-3 hazmats – A case of Indian state highways

United Nations Class-3 hazardous materials (hazmats) are basically liquid products and transported in road tankers under ambient temperature and atmospheric pressure. They are mostly flammables and some of them are toxic (e.g. benzene) as well. The spillages due to collision related incidents involving the road tankers, carrying such hazmats through highways, pose not only flammability hazards due to pool fire, flash fire and vapor cloud explosion (VCE), but create substantial toxic hazards also. The paper presents the risk-based study of route evaluation of two state highways and one urban city road in western India on account of transportation of class-3 hazmats, namely benzene, toluene, p-xylene, methanol, cyclohexane and acetone. A comparative evaluation of study routes was undertaken based on their societal risks presented in terms of F–N curves and assessed against HSE, UK as well as VROM, The Netherlands risk acceptance criteria. Societal risks contribution of cyclohexane to the overall flammability risk mainly VCE is found to be the highest followed by acetone and benzene compared to other study hazmats. This is due to highly explosive nature of cyclohexane resulting into vapor cloud explosion. While acetone and methanol pool fires are likely to cause larger area of damage compared to others, benzene supersedes others as far as toxicity risk is concerned and larger evacuation area is encountered, as it poses greater Immediately Dangerous to Life or Health (IDLH) distance than others. Besides, study of initial isolation distance following an accident in case of benzene tanker found that benzene spillage requires larger initial isolation distance than others and so are the day and night protective action zone distances.     

Pb(II) adsorption from aqueous solutions by raw and treated biomass of maize stover – A comparative study

The potential to remove Pb(II) ion from wastewater treatment systems using raw and treated maize stover through adsorption was investigated in batch experiments. To achieve this, batch mode experiments were conducted choosing specific parameters such as pH (2–8), dosage concentration (2–30 g L⁻¹), contact time (5–180 min), temperature (20–45 °C) and metal ion concentrations (10–50 mg L⁻¹). Adsorption was pH-dependent showing a maximum at pH value 5. The equilibrium sorption capacities of raw and treated maize stover were 19.65 and 27.10 mg g⁻¹, respectively. The adsorption data fitted well to the Langmuir isotherm model. Kinetic studies revealed that the adsorption process followed pseudo-second-order model. The calculated thermodynamic parameters showed that the adsorption of Pb(II) was spontaneous and exothermic in nature. Consequently, this study demonstrated that both raw and treated maize stover could be used as adsorbents for the treatment of Pb(II) from industrial wastewaters.     

Safety and reliability assessment of external corrosion defects assessment of buried pipelines—soil interface: A mechanisms and FE study

Due to local liquid accumulation (AL) in the low-lying section of the buried natural gas pipeline, external corrosion will occur at the interface between the pipeline and the soil. External corrosion will produce pit defects, which will reduce the bearing capacity of the pipeline and affect the normal operation of the pipeline. In addition, corrosion group defects can interact with each other. Thus, the service life of the pipeline is seriously affected. In this work, a case of local corrosion failure of the pipeline caused by liquid accumulation on-site is presented. The importance of this work is verified by experiment and field excavation. Besides, based on the Mises-Stress yield criterion, nonlinear analysis was carried out with the finite element method (FEM). The effects of internal pressure, corrosion pit defect size, internal and external wall corrosion, corrosion pit group, and different types of volumetric corrosion pit defects on the failure of L360QS steel pipe were analyzed with consideration of the effects of axial and circumferential zones of corrosion pits. These correlations have not been seen in previous studies. The FE results make up for the disadvantage that the corrosion is simplified to equal depth corrosion in the code, which will underestimate the residual strength of the actual corroded pipeline and lead to unnecessary repair or replacement. The results provide a reference for failure analysis and strength evaluation of buried L360QS steel pipe with corrosion defect.     

Dispersion modeling of LNG-Vapor on land – A CFD-Model evaluation study

Based on methane from renewable resources, LNG is an alternative fuel for heavy and long-distance traffic in land transport. Contrary to its positive properties, the fuel contains risks from an explosion and extremely low temperatures for personal and infrastructure safety. CFD-models are suitable for doing risk analyses for arbitrary scenarios. For examining how to model for risk research the dispersion of LNG-vapor, this paper contains a model variant study, with an evaluation by experiments.This paper describes the use of the CFD-code ANSYS Fluent for simulating experiments of the ‘LNG Safety Program Phase II‘. The content of the well-documented experiments was the research of the vaporization rate of LNG on land and the dispersion of LNG-vapor in the air. Based on the comparison to two experiments, overall 12 CFD-model variants with varying thermal and turbulence parameters were examined how they affect the transient LNG-vapor dispersion in air.The definition of turbulence-boundary-condition at the domain borders had the biggest impact on modeling, followed by the turbulence model. The most accurate model variant had been applied for observing the spreading behavior of LNG-vapor in the air after evaporation on land and analyzing the influence of the LNG-composition to the dispersion. The results show that the mixture of LNG-vapor and the air in the free field is cooler than the ambient air and spreads like a heavy gas on the ground.     

Challenges in performing technical safety reviews of modifications – A case study

The aim of the present study, is to identify strengths and weaknesses of the technical safety review process at a Swedish Nuclear Power Plant (NPP). In this context, the function of safety reviews are understood as expert judgements on proposals for design modifications¹ and redesign of technical systems (i.e. commercial nuclear reactors), supported by formalised safety review processes. The chosen methodology is using two complementary methods: interviews of personnel performing safety reviews, and analysis of safety review reports from 2005 to 2009.The study shows that personal integrity is a trademark of the review staff and there are sufficient support systems to ensure high quality. The partition between primary and independent review is positive, having different focus and staff with different skills and perspectives making the reviews, which implies supplementary roles. The process contributes to “getting the right things done the right way”. The study also shows that though efficient communication, feedback, processes for continuous improvement, and “learning organizations” are well known success factors in academia, it is not that simple to implement and accomplish in real life.It is argued that future applications of safety review processes should focus more on communicating and clarifying the process and its adherent requirements, and improve the feedback system within the process.     

Toxic release of chlorine and off-site emergency scenario – A case study

Release of chlorine gas causes deaths and injuries to workers and the public, resulting in the evacuation of communities and adversely affecting the environment as a whole. The off-site emergency plan is an integral part of any major hazard control system. This paper highlights some salient features of the emergency scenario from a chemical plant, which ultimately lead to fatal consequences all around upon releases of toxic chlorine gas. A typical scenario illustrating the dispersion model of chlorine (for three isopleths concentration) has been estimated by Complex Hazards Air Release Model (CHARM) software package. The enlarged form of this model diagram has been outlined on the area map of the study area for contingency planning. As a broad guide line to the district authorities for contingency planning, evacuation time has also been calculated with reference to a concentration level of 3 ppm chlorine.     

Working Life of Women With Disabilities—A Review

The aim of this study was to present the situation of women with disabilities on the labour market. Women with disabilities suffer from social and professional discrimination. They are discriminated because of their gender and disability. The Q1 Labour Force Participation Study (2013) showed that, in Poland, labour force participation for men and women with disabilities was 29.4% and 14.7%, respectively, while the unemployment rate was 16.1% for men and 17.2% for women. Quarterly information on employment, unemployment and economic inactivity was gathered from a Labour Force Survey in the first quarter of 2013; data from the Ministry of Labour and Social Policy were also included. The participants of the survey were 15 years old or older; they were members of a sample household. The methodology was based on definitions recommended by the International Labour Office and Eurostat. It is important that women with disabilities are substantially less professionally active, while the unemployment rate for them is only slightly higher.     

Does longevity impact the severity of traffic crashes? A comparative study of young-older and old-older drivers

Introduction: This article analyzes the effect of driver’s age in crash severity with a particular focus on those over the age of 65. The greater frequency and longevity of older drivers around the world suggests the need to introduce a possible segmentation within this group at risk, thus eliminating the generic interval of 65 and over as applied today in road safety data and in the automobile insurance sector. Method: We investigate differences in the severity of traffic crashes among two subgroups of older drivers –young-older (65–75) and old-older (75+), and findings are compared with the age interval of drivers under 65. Here, we draw on data for 2016 provided by Spanish Traffic Authority. Parametric and semi-parametric regression models are applied. Results: We identified the factors related to the crash, vehicle, and driver that have a significant impact on the probability of the crash being slight, serious, or fatal for the different age groups. Conclusions: We found that crash severity and the expected costs of crashes significantly increase when the driver is over the age of 75. Practical Applications: Our results have obvious implications for regulators responsible for road safety policies – most specifically as they consider there should be specific driver licensing requirements and driving training for elderly – and for the automobile insurance industry, which to date has not examined the impact that the longevity of drivers is likely to have on their balance sheets.     

Transport risk modeling for hazardous chemical transport Companies—A case study in China

Traffic accidents of hazardous chemical transport vehicles strongly correlate with the operation and management level of road transport companies. An accurate risk assessment of these transport companies will play a critical role in improving their management and supervision and in turn the overall safety of roadways, property, and most importantly people's lives. Therefore, this study constructs a logistic regression scorecard model to evaluate transport risk of hazardous chemical transport companies and evaluates it using a case study in China. This study first selected 16 indicators from the dimensions of driver behaviors, driving performance, dangerous goods and company business operation to construct company user portraits. Next, a K-means++ algorithm was used to cluster the data samples of the companies on a monthly basis. On this basis, a scorecard was constructed based on a logistic regression scorecard model to realize and visualize the monthly risk portrait of companies. The constructed scorecard predicted transport risk of companies accurately. The results show that the more complex the types of dangerous goods transported, the higher the risk value of the company in the dangerous goods index. Moreover, for transport companies, the driver behaviors and driving performance on their trips are closely related to their business risk. In a practical application, the proposed scorecard can realize the dynamic risk monitoring of transport companies and enable managers and supervision departments to clarify where the risk is from. The transport companies can also carry out safety training and rectification for drivers and operations to reduce the occurrence of hazardous materials-related traffic accidents.     

Assessing fitness to drive—A validation study on patients with mild cognitive impairment

Objectives: There is no consensus yet on how to determine which patients with cognitive impairment are able to drive a car safely and which are not. Recently, a strategy was composed for the assessment of fitness to drive, consisting of clinical interviews, a neuropsychological assessment, and driving simulator rides, which was compared with the outcome of an expert evaluation of an on-road driving assessment. A selection of tests and parameters of the new approach revealed a predictive accuracy of 97.4% for the prediction of practical fitness to drive on an initial sample of patients with Alzheimer's dementia. The aim of the present study was to explore whether the selected variables would be equally predictive (i.e., valid) for a closely related group of patients; that is, patients with mild cognitive impairment (MCI).

Methods: Eighteen patients with mild cognitive impairment completed the proposed approach to the measurement of fitness to drive, including clinical interviews, a neuropsychological assessment, and driving simulator rides. The criterion fitness to drive was again assessed by means of an on-road driving evaluation. The predictive validity of the fitness to drive assessment strategy was evaluated by receiver operating characteristic (ROC) analyses.

Results: Twelve patients with MCI (66.7%) passed and 6 patients (33.3%) failed the on-road driving assessment. The previously proposed approach to the measurement of fitness to drive achieved an overall predictive accuracy of 94.4% in these patients. The application of an optimal cutoff resulted in a diagnostic accuracy of 100% sensitivity toward unfit to drive and 83.3% specificity toward fit to drive. Further analyses revealed that the neuropsychological assessment and the driving simulator rides produced rather stable prediction rates, whereas clinical interviews were not significantly predictive for practical fitness to drive in the MCI patient sample.

Conclusions: The selected measures of the previously proposed approach revealed adequate accuracy in identifying fitness to drive in patients with MCI. Furthermore, a combination of neuropsychological test performance and simulated driving behavior proved to be the most valid predictor of practical fitness to drive.     

Investigation of accidents involving powered two wheelers and bicycles – A European in-depth study

Introduction: The number of road fatalities have been falling throughout the European Union (EU) over the past 20 years and most Member States have achieved an overall reduction. Research has mainly focused on protecting car occupants, with car occupant fatalities reducing significantly. However, recently there has been a plateauing in fatalities amongst ‘Vulnerable Road Users’ (VRUs), and in 2016 accidents involving VRUs accounted for nearly half of all EU road deaths. Method: The SaferWheels study collected in-depth data on 500 accidents involving Powered Two-Wheelers (PTWs) and bicycles across six European countries. A standard in-depth accident investigation methodology was used by each team. The Driver Reliability and Error Analysis Method (DREAM) was used to systematically classify accident causation factors. Results: The most common causal factors related to errors in observation by the PTW/bicycle rider or the driver of the other vehicle, typically called ‘looked but failed to see’ accidents. Common scenarios involved the other vehicle turning or crossing in front of the PTW/bicycle. A quarter of serious or fatal injuries to PTW riders occurred in accidents where the rider lost control with no other vehicle involvement. Conclusions: Highly detailed data have been collected for 500 accidents involving PTWs or bicycles in the EU. These data can be further analyzed by researchers on a case-study basis to gain detailed insights on such accidents. Preliminary analysis suggests that ‘looked but failed to see’ remains a common cause, and in many cases the actions of the other vehicle were the critical factor, though PTW rider speed or inexperience played a role in some cases. Practical Applications: The collected data can be analyzed to better understand the characteristics and causes of accidents involving PTWs and bicycles in the EU. The results can be used to develop policies aimed at reducing road deaths and injuries to VRUs.     

OSH star enterprise pilot scheme——a partnership approach to improve the safety performance of construction industry in Hong Kong SAR

Background: The Occupational Safety and Health Council(OSHC) is committed to improve the safety performance of the high risk construction industry.In the past three years,about 40% of the fatal accidents in the construction industry were related to Renovation,Maintenance,Alteration and Addition(RMAA).Due to the poor safety record,some of the RMAA contractors have difficulty in obtaining the Employees’ Compensation Insurance(ECI) cover in the market,or if they could obtain the ECI,the premium rate would be exceedingly high.In view of this,the OSHC,the Labour Department jointly launched"OSH Star Enterprise-Pilot Scheme on Safety Accreditation for the RMAA Industry",which prompts the industry to take practicable safety measures to improve the safety of working environment and reduce occupational injuries.The program also helps the stakeholders and insurers to identify safety-conscious contractors and thereby provide them with a favourable premium rate under the Employees’ Compensation Insurance Residual Scheme(ECIRS).Objectives: The OSHC launches the Pilot Scheme to improve the safety performance of the RMAA industry through providing safety training,subsidizing enterprise to purchase safety equipment and providing safety audit.We also use financial incentive to encourage RMAA enterprises to join the Pilot Scheme-for those who are accredited as "OSH Star Enterprise"could receive a premium discount from the ERIRS when obtaining the ECI.The scheme also differentiates those safety-conscious and law-abiding enterprises from the poor performers,which helps the industry and public identifying the RMAA contractors who pay attention to work safety.Methods: The Pilot Scheme targets RMAA enterprises that employ less than 50 employees in Hong Kong.A three-pronged approach is used to improve the safety performance of the RMAA industry: the Pilot Scheme provides(1) financial support for the RMAA contractors to buy a transportable temporary anchor device and full body safety harness and its anchor system;(2) safety training     

Severity analysis of Indian coal mine accidents – A retrospective study for 100 years

A retrospective study on severity analysis of Indian coal mines accidents for 100 years was done considering fatal and serious accidents and the resulting causalities. The impact of recommendations based on safety conferences and committees over the years was studied. An event evaluation algorithm (EEA) was developed for this purpose. The hazard rate functions and cumulative risk functions for major hazards in Indian coal mines were developed. The study evaluated the status of safety level as well as the scope of improvement for Indian coal mines safety.